1d48707d0ce3446df18ea3bcc0bb348104e15cb7
697
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
9d226b3535 |
Sheet metal DXF: options to leave out the bend lines and to use one layer (#4314) (#6130)
sheet.export_dxf always wrote the dashed bend lines (BEND_UP, BEND_DOWN) and split the flat pattern over a layer for each role. A cutter that cuts every line it is given cut the bend lines too. bend_lines: false now leaves them out, and layers: single writes every entity on layer 0. The defaults keep today's output. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
b88673f366 |
Model cache: each sheet body is written once, not with every state (#6152)
* Test: a saved model keeps each sheet body once A sheet-metal design wrote its sheet bodies again with every later feature's state in the saved model: each feature that leaves the sheet alone (a box beside it) adds more than the whole sheet to the records. A design of many features after its sheet metal passed the cache's 32 MiB manifest limit that way and kept only some of its states (#3220). The test also opens the saved file and wants the sheets taken from it as evaluated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc * Model cache: each sheet body is written once, not with every state Problem: a saved model writes every feature's state, and each state wrote its sheet bodies in full; most features leave the sheets as they were, so a sheet-metal design of many features repeated them over and over (a 280-feature part: 30.5 MB of manifest, 29.6 MB of it 69 distinct sheet records written 243 times). Past the manifest's 32 MiB limit the save thinned the cache (#3220) and opening evaluated the left-out features again, although the distinct data was small. Solution: the records keep a list of sheet bodies, each written once; a state names its sheets by their place in it, as it already does for bodies and sketches. A thinned model keeps the whole list and counts it once against its budget; the reader counts sheets with the bodies and sketches a state holds; the cache format is now /4 (an older cache is a miss). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c0640cb95e |
inspect.parameter_sweep: check a design across a parameter's range (#2273) (#2276)
* inspect.parameter_sweep: check a design across a parameter's range Rebuilds a copy of the design at each value of a parameter and reports what no longer holds compared with the design as it is: features that fail or warn, joint origins that are lost or turn over on their own part, sketch planes that turn over, and sketch solves that fail or fold. The design is not changed; each value's rebuild time is reported too. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * inspect.parameter_sweep: params doc matches what it takes and returns `steps` takes at most 199 (200 values), as the check says; failed and warned entries carry the feature's name; a lost origin says which one; a value the parameter refuses gives {value, ms, ok: false, error}. The refusal test covers steps 200. Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> * inspect.parameter_sweep: Japanese and Chinese labels Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF --------- Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com> |
||
|
|
6224cbf526 |
Thread: the refusal for a fine-only size says what to type (#4971) (#4977)
* claim: #4971 * Thread: the refusal for a fine-only size says what to type (#4971) M28 and other sizes without an ISO coarse pitch were refused as an unknown thread, with examples of other sizes. Thread and threaded Hole now say that the size has no coarse pitch and suggest two to give, such as M28x2 or M28x1.5. The coarse table is unchanged. * Thread: automatic sizing past M56 says what to type (#5055) Automatic thread sizing only knows the ISO coarse sizes up to M56, so a 75 mm shaft was refused with "no metric thread fits a 75.00 mm cylinder", although M75x2 and M75x3 work when typed. Past the end of the coarse range, the refusal now says so and suggests two sizes with their pitch, scaled to the diameter (a hole's size adds one pitch to its bore). The coarse table is unchanged. |
||
|
|
e89a8f56c1 |
MidPoint: the point goes to the line's middle, whichever is picked first (#5011)
MidPoint on a point and a line keeps the first pick still and moves the second. With the point picked first (an end of one line, then the line it should sit in the middle of), the line turned about its far end to bring its middle to the point: a line from (0,0) to (20,0) went to (0,0)-(10,10) for a point at (5,5). A point and a line now put the line first, so the point moves and the line stays; the line still comes to the point when the point can't move. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
dbdeeec2e9 |
Undo restores what a hide put away (#2219) (#4780)
* Undo: what is hidden lives in the snapshot, so hiding is a step (#2219) `Session::execute` records a step only when the document `Arc` changes, and what is hidden lives in `Session::visibility` — saved with the design, but outside the document. `browser.visibility` was also declared `.noundo()`, and `Snapshot` had no field for it, so even a recorded step could not put a hidden body back: undo went to the command before the hide and left it hidden (#2219). `Snapshot` and `Checkpoint` now carry the `Visibility`, `go_to` restores it, and `Session::execute` treats a visibility change as a change of its own. That change is display-only, so it refreshes the view with a revision bump (`refresh_display`) instead of evaluating a model a hide does not touch. The command also takes `folder: "all"` (every body, sketch, construction item, origin item and joint, plus the browser folders and occurrence hides) so Show All can be one step, and asking for the state an item already has no longer reorders the hidden lists: a redundant hide is not a step and leaves no unsaved changes. * Show/Hide: the menus run browser.visibility, so the history has it (#2219) The hide and show actions wrote `session.visibility` directly instead of running the command: the body and face menus (`ui.hide` / `ui.show`), the `V` key (`context_menu::toggle_visibility`), the browser rows' eyes, the Origin rows and `ui.originAll` / `ui.originPart`. The engine could record a step and there was nothing to record — which is why the release still answered "nothing to undo" after hiding from the Browser. They all run `browser.visibility` now (the repo rule that the UI acts through commands), and `ui.showAll` is that one `folder: "all"` call, so Show All is one undo step rather than three. `docs/occurrence-workflows.md` says what visibility does in the history. |
||
|
|
9227685483 |
Smooth sketch dragging on large imported faces (#3222) (#3480)
* claim: #3222 * Sketch drag: project a face sketch's links once per live gesture (#3222) Every live sketch.drag frame refreshed the sketch's links before solving the drag. For a sketch on a face that projects all of the face's edges again: 115-460 ms per frame on the top face of a 600 x 500 mm plate with 120 holes imported from STEP, against about 1 ms for the drag's own solve. The model the links come from cannot change during the gesture. The session now remembers the sketch, document and revision a live frame left. The gesture's next frame reuses the links while nothing else has run: any other command (undo included) or any other change to the design makes the next frame project them again. A test counts the projections. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Sketch drag test: drop an unread assignment (#3222) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
22190e703c |
Revolve, sweep, loft and hole from a nested STEP part's face join and drill it (#3223) (#3987)
With an opened STEP assembly's imported root active (it owns no body), a Join revolve, sweep or loft from a sketch on a nested part's face made a separate body, and a hole at the points of such a sketch found no body to cut. A Join with no targets now takes the body its profile sketch is on, through the same active scope as an extrude, and a hole counts as a cut for the rule that a cut from a component with no body works on every body. Refs #3223 |
||
|
|
f7b08ab8c4 |
Dimension values: #name = value defines a parameter too (#2371) (#4212)
* claim: #2371 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Dimension values: `#name = value` defines a parameter too (#2371) `#width = 40` in a dimension's value now works like `width = 40` (#2916): it adds the user parameter `width` and dimensions with it. On `main` the `#` made it an ordinary expression that failed to parse. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
ae0b1edeac |
Coil: a section from a sketch profile (#4236) (#4239)
* claim: #4236 Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil: store an optional sketch and profile selection Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil: sweep a sketch profile along the helix Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil: accept a sketch and profile selection Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil dialog: pick a sketch profile for the section Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil: cargo fmt Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil: refuse a loaded sketch coil that also sets the primitive section A saved design could add section, section_position or start_angle to a coil that already has a sketch; eval ignored them instead of refusing the contradiction as the command does. Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil: assert the kernel refusal and exercise hostile profile selections Co-Authored-By: Claude Code <noreply@anthropic.com> * Coil dialog: keep the sketch-profile check after rebase Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Format Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Code <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
e2b8bf5a05 |
fix: copy a pattern's features in timeline order, not in the order they were picked (#4873)
A circular or rectangular pattern of a hole and the chamfers on its edges failed with "no edge near ..." when a chamfer was picked before the hole: the chamfer was copied first, onto a body that had no hole there yet. Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
2fd7b6f08d |
Measure: a face or edge picked by its point alone (#4099) (#4114)
* claim: #4099 * Measure: a face or edge picked by its point alone (#4099) inspect.measure (and the MCP measure tool) refused a face or edge item without an index ("missing field `index`"). Face and edge items are now read as body + point with an optional index: the point finds the face (the same lookup face picking uses) or the nearest edge within the pick tolerance, before the selection is built. A missing body or a point on no face or edge is a clear error. Explicit indices still work. |
||
|
|
59795872f6 |
Extrude: document which way a positive taper goes (#4098) (#4115)
* claim: #4098 * Extrude: document which way a positive taper goes (#4098) A positive taper slopes the walls outward (the far end is larger along the extrusion direction), a negative one inward. Say so in the params doc, the JSON schema and the guide, and pin the sign with a test. |
||
|
|
37b7b0bd3e |
Offset free-form curves and mixed chains: trim folds, round corners (#2149, #2676, #2761, #3159, #3828) (#4156)
* Offset of free-form curves: trim folds, round chain corners Offsetting a spline by more than its tightest bend failed with "offset spline has no interior certificate correspondence": the plain offset folds over itself there and a single linked spline cannot follow it. A chain of Bézier curves (any imported SVG outline) was refused outright. Such an offset is now the parallel boundary: the plain offset of every piece, joined round each corner by an arc about it, trimmed where it folds or crosses itself (a sharp corner is left), each kept run fitted with an open spline and certified to the offset tolerance, and the whole proven free of crossings. Tiny kinks are joined directly; zero-length Bézier handles (infinite curvature at the end) are replaced by their chord within a quarter of the tolerance. A single curve whose plain offset is smooth still gets the linked offset; the trimmed or chained result is ordinary curves, not linked to the source, so the command adds no distance parameter for it. * Offset chains mixing lines or arcs with free-form curves A chain offset read every curve with Sketch::exact_segs, which only covers free-form curves, so a chain with straight or circular pieces (a text glyph, an SVG path with L commands) failed with "offset source changed shape". Read them with exact_pieces, which gives lines and arcs from their analytic form; the trimming already handles those pieces. |
||
|
|
7e24f0e35a |
Sketch: a group too large to solve says so, not "conflicts with" nothing (#5280) (#5347)
The solver takes at most 4000 unknowns in one connected group, and a pattern joins all its copies into one, so a hexagon patterned 17 × 20 (4000+ unknowns) failed as "that would over-constrain the sketch (conflicts with )", naming no constraint. The solve report now carries the size of the largest group it could not take, and the failure says how many unknowns are joined, the limit, and that fewer copies or several patterns or sketches stay within it. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
e726f780d1 |
Sketch: the first dimension scales only a connected drawing (#3786) (#3815)
* claim: #3786 Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> * Sketch: the first dimension scales only a connected drawing (#3786) The first length dimension scaled the whole sketch about its origin, so a second rectangle that nothing links to the first was resized and moved too. Now the sketch scales only when its curves form one chain, joined by shared points or constraints (the origin counts as a point); separate shapes keep the previous behaviour: the dimension sizes the shape it measures. Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
a2ae3ffbe0 |
Sketch drag: keep the far end of a tangent line still (#4925)
Dragging one end of a line tangent to a circle or arc let the solver move the
line's other end too, sometimes far ("goes flying"): only the dragged point was
held, and the least-squares step spread the change over the free points. The
drag now first tries holding the line's far end as well, and falls back to the
old solve only when that can't be met. Dragging the end of a tangent line to
(5, 12) moved its other end 0.399 mm on 0.19.0; it now stays put.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
2a0096fe4a |
Release 0.22.0 (#6344)
* Release 0.22.0: version bump, design format 35 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Release 0.22.0: tests no longer expect the folded render and material changes to be pending Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
cc9d76cd86 |
Tapered cut: run on less, then start on the face, when the run on closes a small corner (#4825) (#4858)
A cut starting on a face of its target runs its tool on behind the start plane with the tool's slope. A taper that widens the pocket narrows the tool there, and a corner arc smaller than the run on times tan(taper) closed: "the taper closes the profile", though the pocket itself only grows. The run on is halved, quartered, then dropped (the tool starts on the face with its straight foot) until the tool builds. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c61ffb54a8 |
Insert Part: M2, M2.5, M14, M24 and M30 screws, bolts, nuts and washers (#2091) (#5194)
The fastener tables stopped at M3 and M20. The socket head cap screw (ISO 4762), hex bolt (ISO 4014), hex nut (ISO 4032) and plain washer (ISO 7089) tables, and the coarse pitches they use, now have M2, M2.5, M14, M24 and M30 too, in size order. Set screws and dowel pins are unchanged. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4e6939b5cf |
Extend: extend a free arc in place and add the line the preview draws (#4615) (#4618)
* Slightly fix the extend tool * Extend: add the line the preview draws, and stop an arc on another curve sketch.extend reported "nothing to extend to" whenever nothing stood in the line's way, even though the viewport previewed a line past its end; with nothing in the way the extension now runs as far as the preview shows, on the same measurement, so the click adds what was drawn. An arc extension that ran into another circle or arc refused the target when its crossing already belonged to another curve's end (a shared crossing point of two circles): that point is now joined instead, so the extension closes onto the geometry that is there. --------- Co-authored-by: SolidCraft Dev <dev@solidcraft.local> Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net> |
||
|
|
8cbde001ef |
Front … Isometric View commands, Ctrl+1…7 by default (#5057) (#5058)
* Ctrl+1…7 turn the view to the standard views (#5057) Front, back, left, right, top, bottom and isometric, handled with the other view keys beside Ctrl+8: animated like the view cube, reserved so no command can take them, and ignored on the flat pattern page. * Front … Isometric View are commands, Ctrl+1…7 their default keys (#5057) The standard views become seven commands (view.front, view.back, view.left, view.right, view.top, view.bottom, view.isometric) whose default shortcuts are Ctrl+1…7, instead of keys the window handles itself. They show in Keyboard Shortcuts, can be moved to other keys or cleared, and the digits can be given to other commands. In the app they turn the view as the view cube does; headless they set the session camera, keeping target, distance and projection. |
||
|
|
ad8b2f91bb |
File: a saved model whose booleans retried is taken on opening (#5286) (#5334)
A design file keeps its evaluated model so that it opens without
evaluating the timeline. A feature whose boolean needed a retry records
it, and the kernel's BooleanDiagnostics leaves `rejected` out when it is
empty but has no default for it when read, so reading those records
failed ("saved model: diagnostics"), the saved model was refused, and
the design was evaluated on every open (17.6 s for the reporter's
17-feature design, 1.2 ms with this).
The reading side now takes an absent list as an empty one, without a
change to the kernel crate.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
9919825ea3 |
Expand All and Collapse All in the Browser (#5190) (#5335)
Open or close every Browser folder from the design or a component menu, including folders that start closed. Display only: not saved, not an undo step. |
||
|
|
97e0ff9050 |
Sketch: a face seen edge-on projects as one line end to end (#5375)
A face orthogonal to the sketch plane projected every edge onto the same
line: coincident and overlapping pieces, one per notch, that the face
boundary check then refused on the next evaluation ("boundaries cross,
touch or have ambiguous topology") and marked lost.
A link layout whose straight pieces all fall on one line is now one line
between its two farthest points; vertices along it can be projected one
by one. The face-boundary and loop-identity checks skip such a silhouette,
which encloses nothing. Coincident lines are laid out once.
|
||
|
|
d61dff69a6 |
Exploded views export as an animation (#3713) (#3744)
* claim: #3713 * Exploded views export as an animation (#3713) motion.export_animation takes an exploded view (view: id|name) as well as a study or a joint: the parts come apart at a steady pace from the assembled placement to where the view shows them, and back together with back: true (exploded at the middle frame). 41 frames by default, 81 with back. The home view frames the parts both assembled and exploded. As with explode.show, the design keeps its placements, its history and its saved state. explode.show and the export share the moves; moves a design file gives with no finite translation are left out. * Mechanisms skill: an exploded view's default frame count --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
8c853fff3e |
Press Pull: route curved faces to Offset Face (#2873) (#3463)
* claim: #2873 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Press Pull: route curved faces to Offset Face, with an arrow (#2873) Q sent every non-edge selection to Extrude, which takes only profiles and planar faces, so a hole's wall or a boss's side was refused. The engine's solid.press_pull already offsets curved faces; the window now does too: - Q on a curved face opens Offset Face; its Faces input takes curved faces. - Q with nothing selected opens Extrude as before, and a first pick of a curved face or an edge reopens Press Pull on it (Offset Face or Fillet). - Offset Face's arrow follows a curved face's outward normal where it was picked, so it can be dragged like an extrude's. Fixes #2873 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
46f24f2394 |
Save the browser's view with the design, and an option to hide the origin by default (#1849)
The Origin folder's eye, a finished sketch's Show Profile and Show Dimensions, and body locks move from UiState into the design's saved visibility (origin_hidden, hidden_profiles, shown_dimensions, locked_bodies), so each tab keeps its own and they survive closing the design. The Sketches folder uses the saved browser folder (c0/sketches in hidden_folders); ui.set/ui.inspect keep showOrigin, showSketches, hiddenProfiles, shownDims and lockedBodies. Preferences > Design > "Hide origin by default": a design that never toggled its Origin eye follows the preference. New fields are a pending format change (format/pending/browser-view-state.rs). Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4f4b1fc2d2 | Sketch: select edge midpoints for horizontal and vertical constraints (#5159) | ||
|
|
9e6e0b8df1 |
Render workspace: complete experimental ribbon, resources and effects integration (#5493) (#5494)
* wip(render): reconcile completed material and image pipeline source with 0.20 (#5493) Source-only integration reference for staged review, not a merge-ready aggregate. Donor: 0xlillith/solidcraft@aea20b0115. Upstream: |
||
|
+33 |
b7b25f9e2b |
Render workspace: first basic delivery to main (#6050)
* Normalize UI container violation paths across platforms (#5599) Report repository-relative paths with forward slashes so diagnostics and the existing nested-package regression assertions agree on Windows and Unix. Keep the container detection rules unchanged. Validation: official ui-containers gate and all seven focused xtask tests passed; rustfmt and diff checks passed. Only xtask/dependencies were compiled; no application build or heavy tests. (cherry picked from commit |
||
|
|
4612c5e6a9 |
Equal with three or more curves selected makes them all equal (#4985) (#5139)
* claim: #4985 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Equal with three or more curves selected makes them all equal (#4985) With more than two curves selected, Equal fell back to the pick tool and applied nothing. sketch.constraint.equal also takes curves: [2..200], each made equal to the first in one step (strict, so a conflict changes nothing), and the toolbar sends a selection of three or more curves as that list. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
c0da9fe861 |
Trim cuts a line at its tangent point on a circle (#5074) (#5163)
* claim: #5074 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Trim cuts a line at its tangent point on a circle (#5074) A line the solver made tangent to a circle touches it within rounding noise, and the exact intersection missed the touch whenever the noise fell outside, so trim found no cut there and deleted the whole line. Trim takes its cut points from intersections_within at its own merge distance, as profile detection does (#588). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
19db763899 |
Tapped Hole: verified metric fine, UNC/UNF and parallel G/Rp catalogues (#4178)
* feat: expand tapped-hole catalogue with metric fine and Unified sizes * docs: distinguish metric designations from expanded tapped catalogue * feat: add internal pipe catalogue and checked Rc profile data * Connect parallel G and Rp catalogues to cylindrical tapped holes * fix(i18n): register tapped thread catalogue labels * fix(i18n): complete thread labels in required locales |
||
|
|
9a737bd63c |
Linked components: joints keep their face after Update Links (#3330) (#4874)
* claim: #3330 * Linked components: joints keep their face after Update Links (#3330) A linked design comes in as STEP text, which keeps no face names, so the faces of its bodies were named by their place in the file (`face:<k>`). An edit of the part that adds a face earlier in the file (a second hole of the same size) gave that place to another face, and a joint on the linked part moved there silently. When a link is made or updated, each imported face is matched to the part face it was written from (the same geometry), and the Import feature keeps that face's name in the part (`Feature::link_faces`, a new pending format change). The linked face is named `F<import>🔗<digest of that name>`, pieces keeping their qualifiers, so references follow the part's own history through Update Links as they do inside the part, and a face the part no longer has is reported. Linked faces still answer to `face:<k>`, so older references keep resolving; Update Links warns about joints that use them and reports joints that no longer solve. * Linked faces: a solid's twin keeps its own names; renamed faces count as an update Two solids of a part alike in one place each take the names of the solid the file names them after. Update Links reports a link whose part named its faces differently since as updated (a joint may follow that name to another face), not as unchanged; only a link getting its first names stays unchanged. * Linked faces: Extract to File carries the design's face names too Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com> --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com> |
||
|
|
4dc30c092d |
Mirror and pattern: a pattern or mirror feature as the source (#395) (#3998)
* claim: #395 * Mirror and pattern: a pattern or mirror feature as the source (#395) A pattern or mirror of features refused another pattern or mirror as a source ("Pat cannot be patterned or mirrored yet"). Such a source now stands for what it copied: its own sources are replayed at each of its transforms moved by each of ours, to any depth up to eight. Copies of a feature picked directly keep the instance numbers they had, so existing designs keep their face names; copies made through a nested pattern or mirror are numbered after them, so one feature reached two ways never names two copies alike. A pattern or mirror of bodies as the source is still refused. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
e67ae66f3e |
Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420) (#4423)
* claim: #4420 * Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420) Document::rename_param rewrote other parameters, feature inputs, dimensions, configurations and joints, but not the expressions of sheet metal and plastic rules or the plane a canvas lies on, so after a rename the sheet metal and plastic features using them failed with "unknown parameter" and the canvas left the view. It renames them there now, and param_users lists them (a rule's field, a canvas's input), so a parameter they use can't be deleted. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Parameters: rules' features in drives and the graph; shared rule field lists (#4420) A sheet metal or plastic rule that uses a parameter makes the sheet metal (or plastic) features rebuild when it changes, so parameters.users lists them in drives and parameters.graph links them. SheetRule::fields/fields_mut and PlasticRule::fields_mut replace the hand-written copies of the rules' fields in params.rs, eval.rs and sheet.manage_rules. Suggested by @CamWight. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * fmt (#4420) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
807e367bdb |
Hole: place a Single hole by distances from reference edges (#37) (#2931)
A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.
In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
|
||
|
|
d2eb8cf639 |
Timeline: suppressing a feature keeps later features' body names (#4302) (#4311)
* claim: #4302 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Timeline: suppressing a feature keeps later features' body names (#4302) Bodies numbered by the counter (`BodyN`) take the next free number on every recompute, so suppressing a feature that made one moved every later counted body down one (`Body2` became `Body1`) and broke what named it, such as a Move of `Body2`. timeline.suppress now stores the current names of later features' counted bodies in their `body_names` first, as body.rename already does for a renamed counted body (#1109). Engine only: no evaluation or design-format change. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Timeline: a body made while a feature is suppressed keeps its name (#4302) Suppressing a feature freed its counted name (`Body1`), so a body made meanwhile took it and became `Body3` once the feature was back. Suppress now also stores the suppressed feature's own counted names, and the evaluator adds the names stored on earlier suppressed features to the state's `reserved_body_names` (the names a rename freed, #4957), which the `BodyN` counter passes by. They are taken from the design before each feature is computed and are part of the state digest, so a cached result is only reused when they match. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
89c1f02850 |
Sketch slots: provide typed dimension inputs for every variant (#2423) (#4318)
* claim: #2423 * fix(sketch): add typed dimensions to every slot tool (#2423) |
||
|
|
45edd5baf5 |
Fix midpoint picks in sketch dimensions (#4872)
Retain MID snaps across both picks and materialize reusable midpoint constraints for point-to-line and point-to-point dimensions. Let midpoint pairs choose horizontal or vertical spans with pointer placement before entering a value. Cover projected model edges, overlapping geometry, helper reuse, undo/cancel/reopen, and existing angular and line-circle workflows. |
||
|
|
2e5924ed5e |
Preserve construction references when axes and points are renamed (#4419) (#4449)
* claim: #4419 * fix: preserve renamed construction references (#4419) |
||
|
|
0dffb206b1 |
Assembly: ground the first part; drag free joint chains (#2804) (#2805)
* assembly(feat): ground first parts and drag free joint chains Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(fix): update movable fixtures for first-part grounding Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): keep the motion-cost crank free Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure. Signed-off-by: Karl Von Richter<karl@embeint.com> * assembly(test): free the frame placement fixture Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main. Signed-off-by: Karl Von Richter<karl@embeint.com> --------- Signed-off-by: Karl Von Richter<karl@embeint.com> |
||
|
|
4353f34bd1 |
Delete removes a selected construction axis (#4692) (#4695)
* claim: #4692 * Delete removes a selected construction axis (#4692) Delete on a construction axis skipped it with "the origin axes can't be deleted". It now deletes the construction axis feature, like construction planes; the origin axes X, Y and Z are still refused. |
||
|
|
7e472bc4da |
Cancel Sketch: leave a sketch without keeping its changes (#3838) (#3938)
* claim: #3838 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 * Cancel Sketch: leave a sketch without keeping its changes (#3838) sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's right-click menu) puts the design back as it was when the open sketch was created or opened for editing: a new sketch is removed with its dimension parameters, an edited one returns to how it was. It is one undo step, so Undo goes back into the sketch. The session remembers the design and the undo history at the point a sketch is entered. Cancel uses that only while the history still runs through it (the same steps before, every step since taken in this sketch); otherwise it refuses and points to Undo, so a stale entry can never throw away later work. The icon is the approved close glyph in the sketch accent (alias sketch_cancel); ja and zh carry the new label. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27 --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
e1bf784014 |
Deleting an inserted file removes its components, placements and joints (#4100) (#4113)
* claim: #4100 * Deleting an inserted file removes its components, placements and joints (#4100) A STEP or mesh file inserted into a design makes a component tree. Deleting its feature left that tree behind: the components, their occurrences, the rigid joints that hold them and the bodies' component assignments. A later body that took an imported body's name was then placed in the stale component. Document::remove_component_tree removes a component subtree and everything that refers to it: the features made inside it, its occurrences, the joints on them with their motion links, joint origins, contact set members, motion study keys and exploded moves, body component and offset entries, standard part and link records, and configuration columns. Deleting an inserted file's feature and component.delete both use it; component.delete now also removes joints left pointing at a deleted occurrence. The body transfer refusal moves with it, unchanged. * Only an inserted file's feature takes its component tree when deleted Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove the component tree on delete only for those and for a linked design's feature. Deleting a copied component's independent base deletes just that feature, as before. Older designs get the mark as they open (pending format change), except copied components' independent bases. |
||
|
|
3acb81964a |
Sketch offset keeps its source lines free to turn (#4464) (#4466)
* claim: #4464 * Sketch offset keeps its source lines free to turn (#4464) An offset adds a Parallel between each source line and its offset line. Since offsets became associative, the offset's points are held during a solve, so each Parallel pinned its source line to the offset line's current direction: a closed chain lost its turning freedom (8 degrees of freedom became 6), and Horizontal or an angle edit on a source line was refused as conflicting. The solver and the constructive reading now leave out a Parallel that ties an offset line to the source it follows while the association lives; the association already keeps them parallel. After Break the stored Parallel drives again. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
efb45d7411 |
Delete in a rolled-back history warns about the features after the marker (#3471) (#3698)
* claim: #3471 * Delete in a rolled-back history warns about the features after the marker (#3471) With the timeline rolled back, the checks a delete runs first (the confirmation's "these features will fail", timeline.dependents and selection.delete's would_fail) compared models evaluated only up to the marker. Features after it, broken by the delete, were not listed, so their error marks turned up only once the timeline moved to the end. newly_broken_in_history evaluates both sides over the whole history when either has a marker (on copies; the model and document are unchanged) and is used by the delete's report and by timeline.dependents. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
426f8ddd18 |
Rectangular and circular pattern: copies that miss the body are reported (#3042) (#3919)
* claim: #3042 * Warn when cut pattern copies remove no material A rectangular or circular pattern whose copies miss the body succeeded silently and those copies did nothing. The pattern now reports how many of its cut copies removed no material, and keeps the copies that land. |
||
|
|
27d2fe6ec0 |
Frames: profile library, members along frame sketch lines, and the Frame Member dialog (#4003) (#4004)
* claim: #4003 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the profile library (#4003) The first slice of frames and weldments: the cross-sections structural members will be made of, each SolidCraft's own parametric definition built in code (no vendor or standard size tables are shipped). - solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle, channel, I-beam and a generic T-slot extrusion as exact line/arc regions, with defaults worked out from the profile's size, refusals that name the dimension that does not fit, anchors and placement, and exact section properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem). - frame.profile.list, frame.profile.properties (with mass per metre for a density) and frame.profile.insert (draws a profile into a sketch, locked by default, at a point, anchor and angle). - Tests against hand-computed values (rectangles, circles, composite rectangles by the parallel-axis theorem, fillet spandrels), hostile input, extrusion volume, undo; catalog entries in every locale; docs/frames.md; ROADMAP M15. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: drop the built-in T-slot profile (#4003) Aluminium extrusions and other vendor sections come from the user's own sketch (drawn or inserted from the vendor's DXF), so the library keeps the plain steel shapes only. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: members along frame sketch lines (#4003) frame.member lays one body per straight line of a frame sketch (2D lines or 3D sketch lines), its cross-section square to the line from end to end: - profile: a built-in profile, or profile_sketch, a sketch whose material (nested loops alternating, so two circles make a tube) is the section in its own x and y around its origin; profiles picks override it. - anchor (origin, centre, centroid or a bounding-box corner or edge middle), angle (an angle expression, so a parameter), mirror. - Orientation: the profile's y as near world up as the line allows, x square to both; a vertical member's x is world X (frame::member_axes). - Members follow sketch and parameter edits, undo as one step, save and reopen (format: pending/frame-members.rs), and are named after the profile (Rect Tube 40x40x3, (2)…), numbering on past names already taken. Tests against hand-computed volumes and bounding boxes (rectangle, 3D tower lines, parameter edit, sketch tube profile and picks, anchor/angle/ mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: fixes from the adversarial review (#4003) - Default member lines are what was drawn: projected and other linked curves and 3D wires (a face sketch's edges) and lines of no length are left out. - A profile sketch's material starts from its drawn profiles, as solid.extrude's "all" does, so a section sketched on a face works; the even-odd test uses outlines and boxes worked out once, capped at 256. - Member names are pinned to their lines (`names`, by line id; `body_name` is the base): deleting or adding a line, or deleting another feature, no longer renames other members, and frame.member stores every name it gives. body.rename renames a member on its line (also for later member features); a copy whose body_names were set still names its members by position. - Built-in profile dimensions are expressions (ProfileSpec): they follow parameters, bare numbers take the design's units, and they are feature inputs. frame.profile.properties/insert read them the same way. - Default root/toe radii shrink to the room a thick section leaves; radii given are checked by name; a radius must be 0 or at least 0.01 mm; error messages report the wall or flange value given, not twice it. - A line within 1e-6 rad of vertical orients as vertical, so rounding never turns a post a quarter turn. - A 2D frame sketch in a differently placed component is mapped into the member's frame, and member features recompute when placements change. - Caps before lookups for a design's `lines`; a line listed twice is refused; a 3D wire that runs back on itself is not a line. Regression tests for each, from the review's scenarios. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Frames: the Frame Member dialog on the ribbon (#4003) - Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines picked in the view (or All Lines), a built-in profile and its dimensions or a section picked in another sketch, anchor, angle, mirror and name, with a live preview. Edit Feature reopens it filled in. - Lines picked in the view keep their sketch (a SKETCH_LINES input picks ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches both have a `w2`, and the members went on the newer sketch's lines. - timeline.redefine takes frame.member. Members keep their names through an edit unless it gives them a new body_name; frame.member takes `names`. - A member whose section is a whole profile sketch keeps it when edited (the dialog shows the sketch instead of picking every region, which would fill a tube's hole). - An original frame_member icon, open for review, on the ribbon, timeline and browser. - The angle profile is listed as L-Angle, and web and flange as Web/Flange thickness, so they translate apart from the existing Angle, Web and Flange; the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame command labels it spells the same. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |