Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel accepts `truck` (as well as unset) for its truck backend, and
`boolean_kernel()` reports that backend as `default`. The rig compared
the raw setting with that name, so a run with SOLIDCRAFT_KERNEL=truck
reported every case as "this build runs booleans on the default kernel,
not truck" instead of grading it. The rig now names unset, empty and
`truck` alike as `default`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
All operations move to SMLib at once, so the selector is no longer the booleans' own:
`SOLIDCRAFT_KERNEL=smlib|truck` (read once, unset is truck, the same refusals for an unknown
value or SMLib in a build without it) is answered by `solidcraft_kernel::backend()`
(crates/kernel/src/backend.rs), which every operation's dispatch calls. The boolean's SMLib path
moves to smlib_boolean.rs. The regression rig's kernel check (`boolean_kernel`) now answers from
the switch, and the rig and CLI set SOLIDCRAFT_KERNEL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Two faults made simple curved solids look open (#818's blind hole: 80 open edges, a stadium
slot: 52):
- It meshed with `refine`, the measuring mesh, which splits triangles across curved faces on
their own and leaves T-junctions on the edges they share with neighbours. It now checks the
display mesh, whose faces share each edge's points.
- It matched vertices by rounding to a 1e-6 mm grid, which splits points a rounding error apart
across a cell boundary. It now joins vertices closer than `tolerance.weld_mm` (default 1e-4 mm).
Both cases now have 0 open edges, also with the weld at 1e-6 mm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For the history areas' cases (threads, tessellation):
- A count may be an inclusive range `[min, max]`, where the geometry only bounds it (a modelled
thread's faces).
- `"watertight": true` meshes each body (chord tolerance `tolerance.mesh_mm`, default 0.01 mm)
and requires no open and no over-shared edges, with vertices matched by position.
- `"timeout_s"` gives a case longer than the run's timeout, at most 30 min.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What the complexity ladder needs from the rig's case runner, kept in the one runner:
- A script may name a `base` case directory: that case's commands (and its own base's, up to
32 deep) run first, so a ladder case starts from the previous tier's finished part without
copying its commands. `$CASE` is each recipe's own directory; `$OUT` is the running case's
scratch directory, in its bases too.
- `missing` in expected.json reports the case as not supported yet without running it: a
capability with no command or parameter (multi-start threads, fillet setbacks) stays visible
instead of being faked with a stand-in.
- Each result carries `seconds` (the commands' own time, without process start or grading) and
`measured` (body count, face/edge/vertex counts, volume, area), for the ladder's golden.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
`"outcome": "solid_or_refused"` takes a clean refusal, or else grades the result as usual. Two
bodies that touch along a circle only (#168, #3841) have no one-solid union: a refusal or the two
bodies left apart are both right; fusing them is wrong. The two cases said opposite things
(two bodies, a refusal) and now agree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `"shells": N` in expected.json grades the total number of shells: a body with a sealed void
holds two, and some joins keep several lumps in one body. Those cases (#3175, #3455, #3526,
#3730) are graded on validity again instead of being marked not valid.
- When SMLib's record conversion says "not supported yet" (revolved surfaces, traced intersection
curves), its check gives no verdict. That's shown but not graded, since it isn't a fault of the
body. solidcraft_kernel::SmlibCheck carries the three outcomes.
- `$OUT` in a recipe is a scratch directory outside the repository, for files a case writes. The
two STEP-export crash cases write there instead of /tmp.
- cargo xtask kernel-cases --results FILE keeps every result as JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- solidcraft-cli and solidcraft-engine forward an `smlib` feature to solidcraft-kernel/smlib, so
`cargo build -p solidcraft-cli --features smlib` gives the rig SMLib's check.
- solidcraft_kernel::boolean_kernel() says which kernel this process runs booleans on.
`default` until the SMLib switch (SOLIDCRAFT_BOOLEANS=smlib) lands and answers there. An smlib
run on a build without the switch reports "not supported yet" instead of grading the default
kernel under SMLib's name.
- An area may keep its skipped list in parts (skipped-<part>.json).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every geometry case the old kernel got wrong becomes tests/kernel-cases/<area>/<id>/: an
engine script or oracle recipe, and expected.json with the right answer, from analysis or a
hand calculation, or else the invariants. Never a kernel's output.
- solidcraft-cli kernel-cases <dir>...: runs a case and grades it. The checks are the outcome
(succeeds, or refuses cleanly), the body count, and one closed shell per body that passes the
record's structure and geometry checks and, with SMLib built, SMLib's check(All). Counts,
volume, area, centroid and box are graded where the case gives them. Each run is pass, fail,
not supported yet or crash.
- cargo xtask kernel-cases [--kernel default|smlib|both]: one process per case, so a native crash
or a hang (--timeout) is that case's result. It writes docs/kernel-cases.md: coverage per area
and source, results per kernel, and the sources looked at and skipped (<area>/skipped.json).
- solidcraft_kernel::validity and smlib_built, which the rig's checks use.
tests/kernel-cases/README.md gives the format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>