112e0a3d9c8ff9fac3cce0fd8b0fe7077e0e3bb3
287
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
9308095744 |
Paper text in the browser: Japanese through the font the web app fetches (#4890 F6) (#10516)
The browser has no font folders, so `font_dirs` is empty there. The first kana or Han a text's font lacks asks for the font the web app already fetches on demand (BIZ UDPGothic); no new file. The text is pending until it comes, then sets whatever it has a glyph for. If the fetch fails, or the font lacks a character, that character is refused by name, and the refusal says the web covers Japanese for now. The web app starts the fetch through its existing loader, once, when a text waits for the font, and hands the font over when it arrives. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d01de87552 |
Merge main into drawings (Oct 30)
Brings the 1,270 commits on main since the drawings branch last met it,
including the first drawings landing (#8249), into drawings.
Merged with the drawings snapshot that #8249 landed (
|
||
|
|
63923da2ca |
Viewport: an opened design is framed at the home view, in the middle of the view (#9195) (#9204)
* claim: #9195 * Viewport: an opened design is framed at the home view, in the middle of the view (#9195) A fit the viewport cannot frame yet is kept and asked again on the next frame instead of being consumed and lost, so a design opened from the Home screen or by launching on a file no longer comes up at the default camera, wherever its own coordinates put it. Framing then centres the model on the view rather than on the free rectangle between the floating controls: `Layout` carries `middle`, the view without the panels, computed before the compass, the navigation bar and the OK/Cancel corner join the obstacles. The model is still sized to `drawable`, so it stays clear of every control, but only a panel moves it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * Viewport: keep the centred fit clear of the controls, and frame --sample (#9195) The fit framed the model into a rectangle the size of `drawable` centred on `middle`, which is not inside `drawable`, so the model could sit under the compass, the navigation bar or the render product frame. The model is now sized to `drawable` as before, and only the room left over in it moves the model towards the middle of the view. `s27_move_triad` turns the Z ring on its far side: the model now sits further right, and the Move dialog that docks on the right afterwards covered the ring's old grab point. A launch with `--sample` builds the design straight into the session and never asked for a fit; it now comes up at the home view, framed, like an opened design. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Viewport tests: the cursor orbit's pivot keeps the pixel it was picked on (#9195) With the model now centred on the view, one of the test's perspective drag points lands within the pick tolerance of the box's top edge, and the pick snaps the pivot onto that edge, a few pixels from the cursor. The orbit keeps that point still, as it should; the test compared it with the cursor instead of with where it started. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
|
92af4a21c8 |
Control channel: a per-request param_check level, applied and confirmed by the app (#9184) (#9185)
* claim: #9184 * Control channel: a request's own param_check level, applied and confirmed by the app (#9184) `engine.execute`, `engine.batch` and `engine.script` take an optional `param_check: "off"|"warn"|"strict"` in their params. The app runs the request at that level through the same `run_checked` path and batch preflight a headless session uses, puts its own level back, and every reply says the level it ran at as `param_check` beside `ok`. A command that switches designs keeps the app's level; any other word is refused. Readings and exports answered on a copy off the window thread keep the level too. `control.capabilities`, answered at once on the control-server thread, lists what the channel does beyond the methods every version has: `{"param_check": ["off", "warn", "strict"]}`. An older app answers "unknown method". The MCP bridge asks it once per connection. When the app lists the level, every call and batch goes with it and the app checks against its own commands; otherwise the bridge checks before sending, as #9073 does. At strict, a reply that doesn't say the app checked the call is an error, and the next calls are checked by the bridge. Also: `add_param_warnings` takes the reply by `&mut`, and `with_param_check` sits beside `Remote::new`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Control channel: a design-switching command is checked at the request's level Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`, `view.next_tab` and `view.previous_tab` ran at the app's own level and echoed `off`, so a misspelt call went through at strict. They now have their parameters checked at the request's level before they run (and still run at the app's own level, as each design keeps its own), and the reply echoes the requested level. The MCP bridge at strict now requires the echo to match its level, not just to be there. `param_check` is read only by `engine.execute`, `engine.batch` and `engine.script`; other methods ignore it. The off-thread test now shows the design change computing off the window thread before it is refused. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
a09c24e9bf |
Drawing dimensions: a circle's or an arc's radius and diameter (#4896, W20a) (#8959)
* Drawings saved inside the design's file, in both forms (#3890) K3b of the drawing storage plan, after #7098: a drawing lives in the file of the design it draws (bherbruck's proposal, Cameron's choice), so the separate drawing file goes. - `Document.drawings`: the design's drawings, each its own record of the drawing family (`solidcraft-drawing/N`), each behind its own `Arc`. Every reader and writer of a design now carries them: save, Save As, autosave and recovery, crash copies, the CLI. - A design container keeps each drawing in its own entry, `drawings/<id>.json` (Deflate), beside `document.json`, which holds nothing of them: its bytes, and the model cache keyed to them, are the same with drawings or without. A plain JSON design keeps them inline under `drawings`. - Each drawing is read by its own family's rules, taken out of the design's JSON before the design's own checks. One a build can't read (a newer number, a change it doesn't know, damage) refuses the whole design, never dropped. So does an entry under `drawings/` that isn't a drawing's, one whose record has another id, drawings inline in a container's `document.json`, two drawings with one id, or more than 1,000 (counted before any is read). A design is never saved with two drawings of one id. - Drawings are listed by name, then id: no stored order, nothing to merge when two people add drawings. - A drawing has an `id`, unique among its design's drawings (`Drawing::new` takes the ids already taken). Its source is the design it is in: at most one, an id and no path. - One pending design change, `drawings`: the last release refuses a design saved with it, so it never opens one and saves it without its drawings. One pending drawing change, `in-design`, for the record's new shape. - Gone: `read_drawing`, `read_drawing_file`, `write_drawing_container`, `file_kind`, `FileKind`, `DRAWING_EXT` and `is_drawing_path`. `read_document`, `read_design` and the container writer are as they were before #7098, with the drawings added. Tests: a design's drawings round-trip through both forms byte for byte, with `document.json` and `container.json` the same with drawings or without; their order; every refusal above; a drawing's properties kept as other tools wrote them while a sheet's number out of range is refused; the drawing's id among its objects', a new drawing's id none of the design's; a design with two drawings of one id not saved; mutation fuzz of a design with drawings in both forms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing commands on the design's own drawings, each drawing its own undo (#3890) K4' of the drawing storage plan, on K3b (a drawing lives in its design's file): make, list, open, close and delete a design's drawings, and read and change the open one's settings and properties. It replaces #3891's drawing sessions, which held a drawing as a file of its own. - `drawing.create {name?, language?, units?}` adds a drawing of the design (one ISO A3 landscape sheet with the ISO border, the design its one source) and opens it; refused on an empty design. `drawing.list`, `drawing.open {drawing}`, `drawing.close`, `drawing.delete {drawing}`. `drawing.inspect`, `drawing.set`, `drawing.properties`, `.properties.set`, `.properties.remove` work on the open drawing. Labels in en, ja and zh. - The open drawing is the session's (`Session::open_drawing`, kept in checkpoints), and the part gate keeps the parts apart: a command says the part it works on, the model unless it says otherwise (`.in_drawing()`, `.any_part()`). While a drawing is open the model's commands wait ("a drawing is open: close it to change the model"); the drawing's run only while one is. Files, recovery, undo and redo, checkpoints, selection, diagnostics, the command list and choosing a drawing work either way. `CommandSpec::allowed` is the one check running a command, running it inside another and listing it make. - `Session::drawing` and `Session::edit_drawing` are the open drawing's one way in: an edit is kept when it changed something and still keeps the record's rules, in a new design whose other drawings are shared. - A change that only touches drawings evaluates nothing: `Document::differs_only_in_drawings` joins the render-only path, as render settings and part properties do. A model edit shares every drawing, so it pays nothing for the check. - Undo per part: a step records the part it changed (`Snapshot::part`: a drawing, or the model and its list of drawings). Undo and redo go through the open part's steps only. A drawing's step puts back only that drawing; the model's step puts back the design as it was, keeping each drawing it had as it is now. Making and deleting a drawing are the model's steps. A new step ends what could be redone in its own part only. `Snapshot::of` is the one place a step is taken. - An agent's message that changed several parts keeps their steps apart, rather than merging them into one step that would undo only one part. - `cmd::metadata`'s rules for reading, setting and removing properties are written once (`reading`, `setting`, `removing`) and used by the design's and the drawing's commands. - `drawing::sort` is the one place the drawings' order (by name, then id) is kept; `Document::put_drawing` adds or replaces one in that order. Tests: making, listing, opening, closing and deleting; what making one refuses, at the cap too; the gate both ways, inside another command and in the command list; drawing edits as undo steps that evaluate nothing over 100 rounds; undo and redo per part with model and drawing steps interleaved; redo ended per part; the order by name, then id, after renames; delete and its undo; refused changes; checkpoints; save and open in both forms; properties; hostile values for every command that runs with a drawing open, from the registry; a fuzz of the steps in any order. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Unknown-command tests: the closest id first (#3890) drawing.open now joins doc.open in the suggestion for `file.open`, as the rule says: both end in the same word. The engine's and the CLI's tests check that doc.open comes first and let other close ids follow, as the `solid.extrud` line beside them already does. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Model bodies: their extents seen on a plane, for a drawing view's size (#5866) ModelBody::mesh_bounds_in(plane) is the box of a body's mesh in a plane's own coordinates (Plane::to_local), beside mesh_bounds and in the same way: a body meshed already is measured from its own mesh, and a placement of a part from its definition's shared mesh, with the placement folded into the plane's two axes once (two dot products a point), so no moved copy is made. W07's drawing.view measures a view's extents with it. Tests: a 100 x 50 x 20 block seen on the three principal pairs of axes and from an isometric corner (150/sqrt(2) by 190/sqrt(6), worked by hand), a plane away from the origin, and every placement in the shared-mesh test against its moved mesh, still without a moved copy, and the same again from its own mesh once it is meshed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: projected views in first or third angle, lined up with their parent (#4816, W17a) W17a's second slice: the principal views derived from a base view. - `ProjectedSide` (left, right, above, below): the side of its parent a projected view sits on. - `projected_basis(parent, side, projection)`: in third angle a view shows the side of the model it sits on (one to the right looks from the right), in first angle the side away from it (ISO 5456-2). It's the parent's basis turned a quarter turn about one of its paper axes, through its origin, with no -0. From the front view it gives exactly the named views: right, left, top and bottom in third angle; left, right, bottom and top in first. - `ViewFrame::aligned(side, projection, centre, position_mm)`: a projected view at its parent's scale, lined up with it, so it moves only along the free axis. - The projection is S2's `cell::Projection`, the value the title block's symbol reads, so a drawing has one first-or-third setting. Tests: the front view's projections are the named views in both angles, with no -0; from every named view and a leaning one, a projected view looks from its side and keeps the parent's other axis and origin, four turns or a turn and its opposite bring the parent back; a box's corners line up across aligned views in both angles; hostile parents, centres and positions refused. Corner (isometric) projected views wait for one convention check on first angle. The derivation graph (projected from, aligned to, cycles refused) moves to the view record in the drawing file, where the view ids live. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: measurement on view frames (#4896, W19a) `geom::drawing_measure` is what a dimension on a view reads, in model mm or radians, from model points and edges and the view's basis: one rule for every dimension. The view's scale and place on the sheet never enter. - `linear`: horizontal and vertical along the view's paper x and y, aligned as the view shows the segment, or along a direction picked on the view; a true reading is the segment's own length (aligned only). - `angle`: from the view's horizontal or vertical, a model axis as the view shows it, or another edge, from 0 to π as each line is oriented; a true reading is between model lines. - `foreshortened` says a measured line isn't parallel to the view's plane. - Refused with a reason: points that aren't finite or are past 1e12 mm, an invalid basis, a zero-length segment, a line seen end-on, a zero direction, a zero reading, parallel lines, and a true reading where there is none. `drawing_view`'s `PARALLEL` and `require` are shared. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * drawing.view.snapshot: a view's scale, place and boundary on its sheet (#5866, W07 V2) The first slice of W07: one orthographic view of the design, worked out and returned as data, before any line is drawn, so scripts can lay views out by their boundaries. - `drawing.view.snapshot` takes the view's settings, the sheet it goes on (A3 landscape at 300 dpi when not given) and where its centre goes (the sheet's centre when not given). With no scale it takes the largest ISO 5455 scale at which the view, centred there, lies inside the sheet's drawing border. It returns the resolved view, the scale (and whether it was fitted), the extents on the view's plane, the boundary on the sheet and what it was drawn from. Read-only and not undoable; it opens nothing and saves nothing. - Every body the design places is in the view, wherever its occurrences place it; the browser's eye counts for nothing (`engine::drawing_view::extents`, from P2's `mesh_bounds_in`). A design whose assembly walk stops at its limits (deeper than 64 levels, or past 100,000 placements) is refused rather than drawn with parts left out: `Document::placements_complete`, beside the walk, says whether every placement it holds had its occurrences walked. - `doc::drawing_view::ViewSettings` is the view's one parameter set: the view (named, or a direction and an up), the scale, the two visual styles, the reference settings and tangent edges. A saved view (W12) keeps the same fields; no scale is written as none, not null, so what it writes reads back as the snapshot's parameters. - `render::VisualStyle` names the five styles: visible, visible_hidden, shaded, shaded_visible and shaded_visible_hidden. The shaded ones are refused as not supported yet until the drawing renderer (#5624). - The command has a typed contract (input and output schemas). Its handler reads the contract's own type through `schema::read`, in the contract check's own words, so the check's levels give one message for one mistake and an unknown field is refused by name. The reply includes the sheet, its defaults filled in. Tests: the 100 x 50 x 20 block's boundary in the front, top, right and isometric views at 1:2, worked by hand; the fitted scale on A3 and A4 and near the border; scale, position and margin; the browser's eye ignored; the design untouched; each hostile setting refused; the walk's depth limit one level either side; the contract's keys the same as the settings' own. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views in the drawing record: base and projected views, and the projection (#4816) E4 of the view-boundary plan, with #4816's derivation graph (plan on #4816). A drawing now saves its views, as one pending drawing-format change (`drawing/format/pending/sheet-views.rs`): - `Drawing.views`: each view an object of the drawing, on one of its sheets. A base view draws a source from a direction (`ViewDirection`, as `drawing.view.snapshot` takes it); a projected view sits on one side of its parent. Its place is a point of the sheet, or, lined up with its parent, only how far along the free axis, as the other comes from the parent. A projected view's source and basis come from its chain, so neither is saved. - `ViewOverrides` beside V2's settings: what a view sets itself, each setting on its own (scale, display style, reference style, reference parts hide the model, tangent edges); none is written when left out. Each view has its own reference margin. - `Drawing.projection`: first or third angle (S2's `cell::Projection`). Third angle is the type's own default (Cameron, 2026-10-26), for a drawing that doesn't say and for a new one until a template or a preference chooses. - The rules, checked on reading and after every edit: a view is on one of the drawing's sheets; a base view draws one of its sources, has a scale and a direction that makes a view; every parent is a view, no chain of parents loops, and a chain is at most 32 views; a lined-up view is on its parent's sheet; a place is on paper; at most 4,096 views. A view's id is the drawing's, never another object's. - `Drawing::resolve_view`: one rule for every reader. It turns the base view's basis down the chain (`projected_basis`, in the drawing's projection) and takes each setting from the nearest view that sets it, then the default, saying who gave it. - geom's `is_paper_coordinate`: the one rule for a view's place on paper, now used by `ViewFrame::new` and the record. The record tests' seed drawing has views, so its round trip and mutation tests cover them; their unknown-field examples no longer use `views`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Engine tests: one temporary folder helper and the schema check for every test module (#4816) The view tests use the drawing tests' temporary folder and the schema tests' `conforms`, which were private to their modules. `Folder` moves to the engine's test module and `conforms` is open to the crate. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: inspect and edit a saved view (#4816, W17c) E5 of the view-boundary plan (plan on #4816): what the view's window reads and writes, for the views of a drawing (E4). Both are drawing commands with input and output schemas, and neither evaluates a model. - `drawing.view.inspect {view}`: its kind (base or projected), sheet, source, parent and side, its direction as resolved (named only when it is exactly a named view), its place, and each setting as {value, from, parent?, set}: where the value comes from (the view, a parent by id, the default) and what the view saves itself. A projected view says whether its display settings follow its parent (`linked`: true, false or "partly"). `choices` gives the display styles and the preset scales, so a window keeps no list of its own. - `drawing.view.edit {view, set}`: one undo step. Each setting takes a value, or null to follow the parent (a base view keeps a scale); the margin, a base view's direction and the place change too. `linked: false` saves the display settings at the values they have, `linked: true` clears them so they follow. The reply names the fields changed and the views projected from it whose settings changed with it. The record's rules hold after every edit; an edit that changes nothing is no step. The contract test keeps the edit's fields and the record's (ViewOverrides) one list. The view's boundary comes with the next slice, which works out where each saved view sits on its sheet from its design's extents. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: where a saved view sits on its sheet (#4816) `Drawing::view_centre` gives a view's centre on its sheet: its point, or, lined up with its parent, its own place along the free axis and the parent's centre across it. The free axis is one rule on `ProjectedSide` (`along`, `on_free_axis`), which `ViewFrame::aligned` uses too. `engine::drawing_view::on_sheet` puts a saved view on its sheet: its design's extents on its plane, grown by its reference margin, at its scale, round its centre. The snapshot and saved views share `measure` (refusing an assembly past the walk's limit or one with no bodies) and `boundary`. With nothing to measure (the design has no bodies or places more than a view walks) a view gets a 20 x 20 mm placeholder round its centre. A view's source is the design the drawing is in, so the session's own model is what it measures. `drawing.view.inspect` adds `boundary_mm` and `extents` (status `placeholder` and why, when there is nothing to measure). It still evaluates no model. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Projection of new drawings: a preference, and drawing.set takes the projection (#4816) A drawing's views follow its projection, first or third angle (third when nothing chooses). `drawing.inspect` now shows it and `drawing.set {projection}` changes it as one undo step. Preferences > Design gets a Drawings section with "Projection of new drawings" (First angle / Third angle). A new drawing takes it as a new design takes "Units of new designs": the app sets it after `drawing.create`, with no undo step of its own. A saved value this version doesn't know reads as third angle; asked for over the control channel, it is refused. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing sheets: one edit, one lookup, a border that lays out, and schemas (#3875) The sheet commands change the drawing through `Session::edit_drawing`, so the same settings or order again leave no undo step, and answer from one reply type. A sheet is looked up by id or name on `Drawing` (`sheet_index`), where later commands that name sheets find it too. A sheet's border must lay out on it: the record's check runs the border's own layout, the one rule drawing uses, so a 15 x 15 mm sheet with the ISO border is refused when it is made, not when it is drawn. `excluded` must be an object of `count` and `print`: a mistyped key changed nothing unseen. A new sheet documents nothing and leaves nothing out unless told, and the add's parameter documentation says it takes `documents` and `excluded` too. The drawing's properties sit behind an `Arc`, as its sheets do, so an undo step shares them. Each sheet command has an input and an output schema (#4035). A flattened part of a contract reports its keys as the parent's own (`schema::flattened`, which `FeatureCommon` now uses). The tests add the missing cases: 1000 sheets and the 1001st, `after` by id and unknown, the resolution's bounds, a name two sheets share, the same order and settings again, an undone delete in place, and the add's reset of what it documents and leaves out. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing ids: one id source per session, its seed kept for replays (#3890) The drawing commands drew ids from a fresh random source each time, so a crash replay of a drawing could never find what an earlier command made by its id. A session now has one id source (`Session::ids`), kept across a file change, from which `drawing.create` draws its drawing's, sheet's and source's ids: seeded alike and run alike, a session gives the same ids, and a failed command draws none, so a replay of what succeeded draws the same. The crash journal keeps the seed at each base and `replay.json` carries it, which `solidcraft-cli crashes replay` seeds the replay with (`Session::seed_ids`). Tests: two sessions seeded alike make a drawing with the same ids, another seed other ids. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing sheets: add, change, reorder and delete a drawing's sheets (#3875) W18 S4: the sheets of a drawing, on the drawing session K4 made (#3890). Each command is one undo step of the drawing and names a sheet by its id or, when only one has it, its name. - `drawing.sheet.add {after?, name?, size?, orientation?, dpi?}`: a new sheet after the one named (the last when not), taking that sheet's paper, border and resolution, with a name of its own ("Sheet 2") and nothing documented yet. - `drawing.sheet.set {sheet, name?, size?, orientation?, dpi?, documents?, excluded?}`: one setting at a time, the rest kept; `documents: null` clears what it documents, and `excluded` changes only the flags it gives. - `drawing.sheet.reorder {sheets}`: every sheet's id once, in the new order. - `drawing.sheet.delete {sheet}`: a drawing keeps at least one sheet. - Every change goes through the drawing's own rules (`Drawing::validate`), so what a saved file would refuse is refused here. Changing a sheet's paper changes only the paper: regrowing its border and moving what is on it is S5's. Labels in en, ja and zh. Tests: a new sheet copying the paper it follows, after a named sheet too, and undone; each setting changed with the others kept; nine refusals (resolution, sizes, orientation, name, an unknown source, a flag, an unknown sheet, no sheet named) with the drawing unchanged; reordering, and four orders that aren't every id once; a name two sheets share refused in favour of the id; the last sheet kept. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing sheets: a new sheet's id from the session's id source (#3875) `drawing.sheet.add` draws its id from `Session::ids` (#3890's one id source per session), so a crash replay of "add a sheet, then change it by id" finds the sheet: seeded alike and run alike, a session adds sheets with the same ids, and a failed add draws none. Tests: two sessions seeded alike add the same sheet ids, another seed others, a failed add none. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: move or copy a view to a sheet (#4816) `drawing.view.move_to_sheet {view, sheet, position_mm?, break_alignment?}` puts a saved view on another sheet as one undo step, keeping its id, direction, source and settings. The views lined up with it go with it and keep their places beside it; a view placed apart stays. Without a position it keeps its place. A view lined up with its parent moves only with `break_alignment`, and is then placed apart: at the position, else the sheet's centre. Its own sheet changes nothing. `drawing.view.copy_to_sheet {view, sheet, position_mm?, with_linked?}` makes new views, each following none of the views it was copied from (Cameron's rule). A view with views lined up with it needs `with_linked`: true copies them too, lined up with the copy; false copies it alone. A projected view copied alone becomes a base view, looking the way it did (by name when it is exactly a named view) with the settings it had as its own. The copy goes to the position, else the sheet's centre. A lined-up view's centre comes from the places alone: its place along the free axis, and its parent's centre across it. So the views that travel with a view are shifted along their free axis, and nothing needs the design's extents. `descendants` takes which views it follows, so the edit's followers and the views lined up with a view are one walk. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: move and copy take a view's centre from the record (#4816) Moving or copying a view to a sheet worked out a view's centre with its own copy of the lined-up rule. It now uses `Drawing::view_centre`, and a lined-up view's place moves along its free axis by `ProjectedSide::along`, so the rule is written once. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing sheets: a change of paper lists the views it leaves outside, and moves none (#3875) W18 S5, its first part. `Sheet::drawing_space` is where a sheet's drawing goes: inside its drawing border, or the whole paper with none. Nothing on a sheet is saved against the border, so a change of paper regrows the border and its zones by itself. `engine::drawing_view::outside` lists the views whose boundary (`on_sheet`) leaves their sheet's drawing space, sides included. `drawing.sheet.set` lists them after a change of paper (size or orientation; nothing else moves the space, so nothing else is measured), and moving or copying a view to a sheet lists those it puts outside there. None is moved: where a view goes stays the author's choice. A view with nothing to measure is listed by its placeholder, with why. Tests: the drawing space with the ISO border, a filing margin and no border, and margins that leave none; A3 to A4 either way up listing the right and top views with their boundaries and moving nothing; a border through a view's edge leaving it inside, 0.1 mm less paper putting it outside; a change of name checking nothing; undo; a move to a smaller sheet listed and a copy that fits not; a placeholder listed as `past_walk_limit`. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing ids and the sheet border: the tests the slices left out (#3890, #4816, #3875) What the slices' planted faults found untested, now each caught by a test: - a file change keeps the session's id source: a drawing made after `file.new` draws the same ids in two sessions seeded alike; - a copied view's ids come from the session's id source, seeded alike giving the same copies; - a crash report's replay carries the session's id seed, from a caught panic (the seed when the command started) and from the journal of an unclean exit (the seed at its base); - a view short of the sheet's border by less than a rounding is still inside it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: listed by id, whatever order they were added in (#4816) The record's rule says a drawing saves its later records by id, never in the order they were added in. Views were kept, and saved, in the order they were added, so the same views added in another order saved as other bytes. - `Drawing::add_views` adds views where their ids put them. It is the one way views are added: `drawing.view.copy` uses it, and so do the test fixtures. - `Drawing::validate` checks the order, so every edit keeps it. - Reading puts a file's views in id order before it checks the record. The order means nothing, so a file in another order (saved before views went by id, or edited by hand) isn't damaged: it opens, and saves by id. - What a command lists in the drawing's order (the views a change of paper leaves outside, an edit's followers) now comes by id. No format change: no release has saved a view (the views change is still pending). Tests: - views added out of id order are listed and saved by id; - the same views added the other way round make the same drawing and the same bytes, which read back as saved; - a file that lists them the other way round reads by id, as the same drawing, and saves as those bytes; - an edit that leaves them in another order breaks the record's rule; - the existing tests now index the file by id order, and the engine's lists are by id. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: the dimension record, saved by name on a view (#4896, W19b) A drawing saves its dimensions: each on one of its views, measuring named corners or edges of the view's model (a linear distance between two corners, a straight edge's length, or the angle between two edges), with the direction and reading W19a measures with, how far its line sits from what it measures, where its text sits on paper, its decimals and any text shown instead of the number. A reference names its body, the feature that made the body and its occurrence path, never a picked point. Nothing worked out is saved. - Dimensions are listed by id, read in that order whatever order a file has, as views are: one helper pair (add_by_id, in_id_order) now keeps both lists. - One cap for the names a saved model reference keeps (MAX_REFERENCE_NAME_BYTES, used where 512 was written three times), and the corner's edge cap shared with construct's vertex references. - LinearDirection and Reading save as snake_case words; a direction along a line saves as its two coordinates. - A direction along a line is at most 1e9 each way (format::MAX_REAL, the limit the file's number check holds every real number to): a whole number past it passes that check, reads as a real, and would save as one the next read refuses (found by the mutation test). - One pending drawing-format file (dimensions.rs). Tests: what each dimension saves and reads back as the same bytes, a file in another order reads by id, an older drawing has none; every rule on both sides of its cap, unknown fields at every level, the id rule, and the count cap; the plate fixture carries one dimension of each kind, so the existing round-trip and mutation tests cover them. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Edges and corners by name: the matching step and the shared ends, each in one place (#4896, W19b) A dimension finds an edge by name the way a fillet does, but never takes the piece nearest an old pick, and finds a corner where its named edges meet, refusing to choose between two. Both steps are split out of the code that already does them, so there is one rule each: - BodyEdges: a body's edge and face names, worked out once for every name looked up on it, and `matching(name)`: the edge with that name, else the one edge between the faces it names, else the pieces of it. locate_edge now calls it and then takes the piece nearest the pick, as before. - construct::shared_ends: the ends every named edge has, each once. named_vertex keeps the one nearest its point, as before. No behaviour change: every caller of locate_edge, find_edge and the vertex references gets the same results. The existing naming, joint and construction tests cover both paths; three new ones pin what they left open: a vertex only where every named edge ends, the piece of a split edge nearest the pick, and a lone match through the stem of a face taken as a piece, with the warning. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * A body's frame through an occurrence path, in one place (#4896, W19b) Document::body_frame_at(body, path): the placement the path leads to, then the body's offset, without expanding every assembly instance. It is what EmbossFace::body_frame composed for its saved path; that now calls it, and drawing dimensions use it for the occurrence path they save. No behaviour change. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions found again in the model, strictly (#4896, W19b) Document::resolve_dimensions(model, drawing, ids) works out each dimension as the model has it now: - An edge by its name, or the one edge between the faces it names (BodyEdges::matching), never the piece nearest an old pick. A corner is the one end all its named edges, or their pieces, share; two shared ends are ambiguous, never "the nearer one". - The body by its name and the feature that made it, placed through the saved occurrence path (Document::body_frame_at). A same-named body made by another feature isn't it. - Status: ok; overridden (the text given is shown, the value still worked out); ambiguous (the candidates, at most 16, none chosen); suppressed (its feature is suppressed or rolled back, read from the evaluation's own skipped mark); lost (why); unmeasurable (found, but the view can't measure it so, in W19a's words, such as a line seen end-on). - The value comes from W19a on the view's basis. An angle is the smaller one between the two lines, or pi minus it on its other side, whichever way the kernel runs the edges; a split edge's pieces on one line are still that line. A split edge's length is ambiguous. - The text: the override, else length_number in the drawing's unit (or the design's) with the dimension's decimals, or degrees for an angle. - The cost: each body named is looked up once per call, and its edge names worked out once, however many dimensions name it. A body none names isn't touched. Not saved: nothing here changes the drawing. The last good value of a lost dimension needs the session, so it comes with the commands (W19d). Tests (engine, an 80 x 40 x 30 box, values by hand): front and right view values, foreshortening and text, the drawing's own unit, several at once and an unknown id; a change and its undo; a chamfer's 45 and 135 degrees, and end-on in the front view; lost after a fillet and back on undo, suppressed and back, a path to no occurrence, a new box with the same body name; a notched edge's length ambiguous with both pieces while its end corners still read 80 and its angle to the left edge 90 degrees, neither exact; an angle on a piece of an edge whose slot is then suppressed still reads 90 degrees, found through the stem of the face it was cut from, so not exact; one edge named twice gives two corner candidates; an override shown while the value follows the model. Not covered by a test here: a part placed twice through real occurrences (only a path to no occurrence is); the once-per-body cost (not measured). A drawing unit outside display_units' five (um, yd, km, mil, nm, inch, µm) shows millimetre numbers, the formatter's existing fallback; named as its own follow-up. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing sheets: a sheet with anything on it goes only with it, when asked (#3875) drawing.sheet.delete refuses a sheet with anything on it, and its error names what is there: its views and the dimensions in them, the first few ids of each. With `contents: "delete"` the sheet goes with everything on it as one undo step, which an undo brings back whole. What is on a sheet is said once, in the record (Drawing::on_sheet), and Drawing::remove_sheet takes the sheet out with exactly that; each later kind of record on a sheet (a sheet's own sketches) adds itself there, so delete covers it with no change here. drawing.sheet.set's list of a sheet's views uses the same function. Nothing on another sheet goes with it: a view there projected from one of the sheet's views would lose its parent, so the delete is refused naming those views, to be moved or deleted first. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: a view found by id by halves, in one place (#4816) The views are listed by id, so Drawing::view and Drawing::view_index find one by halves instead of walking the list. Every lookup by id uses them: a view's chain of parents (so resolving a view no longer walks the list once for each parent), the views' rules (which no longer build a map of every view to check each chain), a dimension's view, and the engine's view commands and outside check. The rules check the id order before anything looks a view up, so a file with its views out of order is still refused as before. Measured on a drawing of 4096 views (1024 chains of a base view and three views projected one from another), median of 30 runs: 4096 lookups by id took 6.85 ms by a linear find and take 105 us by halves; the rules' check took 1.77 ms and takes 1.45 ms. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: a damaged chain names the view whose parent is missing (#4816) A view whose chain of parents breaks further up was refused with "its parent X isn't one of the drawing's views", naming a view that isn't its parent. Further up the chain, the refusal now names the view whose parent is missing: "its chain of parents reaches view Y, whose parent X isn't one of the drawing's views". A missing parent of the view itself reads as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: add one to a view, and read it back (#4896, W19d) drawing.dimension.add puts a dimension on a saved view of the open drawing; drawing.dimension.inspect reads one back with what it measures now. Adding is one undo step of the drawing; neither evaluates the model. What a dimension measures is picked and saved by name, never by the point picked. Document::edge_reference and corner_reference turn a pick into the record's names: an edge is a point on it in the design's frame or {body, index} (its index among the body's edges as the model lists them, as an ambiguous dimension's candidates are given), and a corner is a point or the edges that meet there, each with the occurrence path its body is placed through. A pick that doesn't name one thing is refused, saying what it found: no edge, a point on several edges, a corner of more than one body, edges that don't meet. Each body's edges are placed in the design's frame once per pick, and only the body picked has its edge names worked out. The kind is given as the record saves it ({linear: {a, b, direction?, reading?}}, {length: …}, {angle: …}), read by the record's own types, so a command and a file read the same words. A new dimension's line is 10 mm from what it measures (until a dimension style gives it), shows 2 decimals, and its text is centred on its line; the text's default place at its centred point (Q58) comes with the layout on paper. The inspect reply has the record, the status (ok, overridden, ambiguous, suppressed, lost or unmeasurable, with why), the value (model mm, or degrees for an angle), whether it is foreshortened, the text, whether every name was found by exact history, and an ambiguous dimension's candidates. One rule, one place: the corner rule's point tolerance is construct::point_tolerance, shared by the picks; a dimension by id is Drawing::dimension, which the resolver uses too. Not here yet: edit, the view's list of its dimensions, the layout on paper and the last good value (the next slices); delete waits with view delete for the drawing UI's choice of one delete command or one for each kind. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: change a dimension's settings (#4896, W19d) drawing.dimension.edit {dimension, set} changes what a dimension shows and where, as drawing.view.edit changes a view: the offset of its line, its text's place, its decimals, the text shown instead of its number (null shows the number again), and its kind's direction, reading or other side. The reply names the fields that changed. The same values again change nothing and add no undo step (the drawing is put back only when it differs). What a dimension measures isn't a setting: to measure something else, add a new one. A setting its kind hasn't got is refused (an angle has no direction, only an angle has an other side); every changed record passes the check a file read runs, so an edit can't save what opening the file would refuse. A dimension's place in the list is Drawing::dimension_index, which Drawing::dimension now uses too, as a view's is. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: inspect lists a view's dimensions (#4896, W19d) drawing.view.inspect answers `dimensions`: the ids of the view's dimensions, in id order, so a caller can find them and read each with drawing.dimension.inspect. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing views: a copied view takes copies of its dimensions (#4896, W19d) drawing.view.copy_to_sheet copies each copied view's dimensions with it, each with an id of its own on the copy, in the same undo step: they are part of what the view shows (the W19d plan's question 1, its recommended answer). A dimension's text placed `at` a point is from its view's centre, so it keeps its place on the copy. A moved view keeps its own dimensions as they are: they name the view by id. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: the last good value, in memory (#4896, W19d) A dimension that can't be measured now (its edge filleted away, its corner gone) gives `last_good`: the value it last read this session, as `value` gives it (model mm, or degrees for an angle). Each value a dimension reads is kept by drawing and dimension in the session, and a scratch copy keeps the session's. It is never saved (the W19b plan's question 3), so a design's drawings don't change with every model edit, and after reopening a lost dimension shows no number. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: hostile values anywhere in the commands' params (#4896, W19d) A hostile value in each place of drawing.dimension.add, .edit and .inspect's parameters, at every depth (the kind, its picks and paths, a corner's edges, the edit's settings), with 1 000-item lists, the largest index and 600-byte text besides the engine's shared hostile values: no panic, and the drawing keeps its rules. The engine's own hostile test sends only its list of key names, none of which these commands read. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: a new dimension's defaults, tested (#4896, W19d) The offset (10 mm), the text's place (centred) and the decimals (2) a dimension is added with when not told. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * A plane carried by a transform, in one place `assembly::map_plane` is public and gives `None` for a transform that flattens the plane; its two copies (the occurrence mapping, which keeps the plane as it was, and the face anchor's, which refuses) now call it and keep their own fallback. W20a's radial dimensions use it to carry a view's plane into a body's frame. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Drawing dimensions: a circle's or an arc's radius and diameter (#4896, W20a) A radial dimension saves its edge by name and whether it shows the diameter. It reads the edge's exact circle in the view's plane through the edge (`Body::planar_edges`, as the view draws it), so a view that doesn't see the circle face on can't measure it; its text is R or Ø before the number. `drawing.dimension.add` takes `{radial: {edge, diameter?}}`, a diameter by default for a whole circle or half a turn or more (a hole's rim is two halves), and refuses a dimension of any kind its view can't measure; `drawing.dimension.edit` switches `diameter`, keeping the id. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4a781b8cd8 |
MCP: --param-check checks calls to the running app (#9072) (#9073)
* claim: #9072 * MCP: --param-check checks calls to the running app (#9072) `mcp --connect` (and `mcp` once it bridges to an app) took `--param-check` and forwarded every call unchecked, while the app's own session is always off. `Remote` now checks each `engine.execute` and `engine.batch` against this server's command contracts before sending: `strict` refuses a call, or a batch with such a step, without sending anything, and `warn` adds `param_warnings` to the app's reply (each step's result in a batch). A command with no contract here goes to the app unchecked. `Auto` carries the headless session's level over when it bridges to a late app. `batch_preflight::contracts` is the contract half of the existing preflight, for a runner in another process. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
2356a63aea |
CLI: run takes --param-check (#6921) (#6924)
* claim: #6921 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CLI: run refuses unknown options and takes --param-check (#6921) `solidcraft-cli run` now checks its options through `known_args`, so a mistyped option fails instead of being ignored, and takes `--param-check off|warn|strict` with the MCP server's words and default `off`. `warn` prints each unknown key with a suggestion on stderr and runs the step; `strict` stops at that step and writes nothing. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * CLI: run's option check takes --param-check; warn on timed runs as steps complete `run` keeps #6919's (#6918) unknown-option check, with `--param-check` among the options that take a value. `Session::run_script_timed` now takes the same per-step callback as `run_script_each`, so `run --timings` or `--profile` at the warn level reports a step's warnings even when a later step fails, instead of after the script (and not at all on a failure). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
9b97e06f71 |
Web: open tabs share settings changes, so one tab no longer undoes another's (#8644) (#8832)
* claim: #8644 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Web: open tabs share settings changes, so one tab no longer undoes another's (#8644) Every open tab of the web app saved its whole copy of the settings to the same browser storage, every 30 s and on focus loss, so a tab still holding old settings put them back over a toolbar change made in another tab. A tab now writes its settings in the frame they change, and the other open tabs load them from the browser's storage event, so their own saves keep them. Settings loaded that way aren't written back. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
5f11d92458 |
Opening a design pins its body names, so the first undo evaluates nothing (#8939)
Problem: a design saved before body names were pinned (#6403) is pinned by its first command that changes it, as part of that command. Undoing that command went back to the unpinned design, whose fingerprints no evaluated result matched any more, so the first undo after opening evaluated the whole timeline again: 63-72 s in the SELENE rover (5,484 features) when opened from the command line or headless (`Session::opened_at`), 0.08 s with this change. `doc.open` pinned at the end of the command instead, which kept undo fast but left the design with unsaved changes on opening. Solution: `Session::opened_at` pins the names as it opens the design, with the names the file's bodies have (no result changes, so nothing is evaluated), and takes the pinned design as the saved one: opening is no change. Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com> |
||
|
|
3e01081ff9 |
Control token: a closing window removes only its own token and discovery files (#8794) (#8837)
* claim: #8794 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ * Control token: a closing window removes only its own token and discovery files (#8794) Under Flatpak each instance has its own loopback, so a second window binds the same port number as the first and writes the same <port>.token, <port>.pid and current.port in the shared data folder. At exit the first window deleted them all, unconditionally, leaving the second window running with no token file a client could read. remove_token_file now takes this launch's token and removes the token and process files only while the file still holds it; the process id can't tell instances apart, as every Flatpak instance has the same one. remove_current_port also takes the token and keeps the discovery file while another launch's token file holds that port, and removes current.pid with current.port (it was left behind). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ --------- Co-authored-by: Claude <noreply@anthropic.com> |
||
|
|
cb05e1e0f7 |
GPU path tracer: run on Metal on macOS (#7183) (#7185)
* claim: #7183 * GPU path tracer runs on Metal on macOS, not only Vulkan (#3217) |
||
|
|
0baf49b25f |
Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756) (#7923)
* claim: #6756 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756) wgpu's Dx12Compiler::Auto loads dxcompiler.dll by name, so Windows takes the first one on PATH. SolidCraft ships none, and DXC 1.8.2505 from other programs' folders (Obsidian, NVIDIA SDK Manager) crashed every start with EXCEPTION_ILLEGAL_INSTRUCTION during the viewport shader compile. solidcraft_gpu::dx12_compiler() now chooses: WGPU_DX12_COMPILER as wgpu reads it when it names a compiler; otherwise DXC from the dxcompiler.dll beside the program, by its full path, else FXC. The window, the headless/CLI instance and the test helpers start with it, and dx12_compiles_with_fxc follows it. WGPU_DX12_COMPILER=dxc keeps the old lookup. Fixes #6756 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4571701179 |
Embed a Windows version resource in solidcraft.exe (#8378)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
e6dc105134 |
Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151) (#5381)
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151) A point cloud is kept in the design as a reference, drawn as depth-tested dots and never a body. - io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric type, optional colours, other elements skipped; counts checked against the file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with faces can also come in through file.insert_mesh. - doc: Document.point_clouds (shared f32 points relative to an f64 origin, colours, units, rigid placement, size and colour), stored as a binary container part; format change in pending/point-clouds.rs. - engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as a new design; selection.delete takes point_clouds; view bounds include them. - gpu: an instanced point-sprite pipeline (16 bytes a point). - ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU viewport fallback; messages in en, en-GB, ja, zh, de and ko. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Point clouds: colour by the file, one colour or height, from the UI (#5151) The Edit Point Cloud card gets Color By (File Colors, Single Color, Height). Height is a blue-to-red ramp over design Z, between the cloud's own two heights or, by default, a range worked out from the points (all but the lowest and highest 2 %, from an even sample). pointcloud.insert and pointcloud.edit take color_by and height_range; pointcloud.list reports them. The colour of each point is worked out in one place (PointCloud::shade) for the GPU and CPU viewports. Also: the card's dropdowns compare the picked index (a dropdown's response doesn't report the pick, so File Units did not change either). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Point clouds: integrate format registration and viewport caches (#5151) * Point clouds: satisfy current UI audits and document comparisons (#5151) Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase. * Point clouds: isolate translations for current main (#5151) Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase. * Point clouds: fit the rebased code to main's GpuTarget and Frame Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Compare point clouds when reusing placement-independent results Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Point clouds: complete command help and required translations (#5151) * Point clouds: size the save cap from the raised limit after the rebase Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
6b523d6839 |
Theme drops: build for the web, and import there too (#8226) (#8534)
DroppedFile::bytes exists only on native; the web build stopped at take_theme_drops. Native keeps reading the file there. On the web, the shell already reads every drop asynchronously before the app sees it: a drop over Preferences' Import tile now arrives as a theme and goes to prefs::import_theme_bytes, instead of being opened as a design. |
||
|
|
d7ef5280c5 |
Ctrl+W closes the design shown, not the browser tab (#5366) (#5466)
Ctrl+W (Cmd+W) closes the active design, asking first when it is unsaved; closing the last one shows the start page. In the web app a capture-phase keydown listener keeps the browser from closing the tab while a design is shown; on the start page the browser closes the tab. Ctrl+W joins the keys the app reserves, and the tab menu's Close shows it. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
dd2e44bb12 |
Raise the largest file SolidCraft opens with a setting or launch flag (#4086) (#7565)
* claim: #4086 * Raise the largest file SolidCraft opens with a setting or launch flag (#4086) * Translate the file size limit strings * Size limits: design files are .sc now, .solidcraft still read |
||
|
|
dba3a226f6 |
Closing from the background brings the window forward to ask about unsaved changes (#7783) (#7784)
* Closing from the background: the window comes forward to ask about unsaved changes Right-click › Close on the taskbar while another app had the focus showed the "save changes?" prompt in a window that stayed behind, so the close seemed to do nothing. When the close stops at the prompt, the window now asks for the focus (unminimizing it first) and for the user's attention, which is what native Wayland offers (xdg-activation) and marks the taskbar entry where the system refuses the focus. A window already in focus is left alone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * X11: ask the window manager to raise the window as a user action winit's Focus asks as an application, which KWin's focus-stealing prevention refuses for a window last used before the switch away: it raised nothing and, since the attention request was then skipped, did not even mark the taskbar. On X11 send _NET_ACTIVE_WINDOW with source 2 (a direct user action) through x11rb, which restores a minimized window too; native Wayland keeps the attention request. Moves the logic into come_forward.rs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Come forward once the taskbar menu is gone, without flicker KWin raised the window, then the taskbar's closing context menu handed the focus back to the previous app 2 to 11 ms later, so the window only came forward some of the time; asking again made it flicker. Ask 120 ms after the close instead, and again only when the focus is taken back within 50 ms of a request (a slow menu) or never came. A later switch away is the user's own and the window stays behind. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
8be7bb0201 |
Insert design: file names get the dialog's width (#8097) (#8122)
* claim: #8097 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Insert design: file names get the width the size and actions leave (#8097) The web app's "Files in this browser" window listed stored files in an egui Grid sized from cell content: the wide action buttons took most of the fixed window width, the name and size columns were cut, and the rest was empty. Add ui_kit::name_list on the kit's table grid: the name column takes the width the other columns leave, the other columns are as wide as their widest cell (measured as drawn, a changed measurement discards the frame), and a name is cut with an ellipsis and its full text on hover only when it does not fit. The window is a little wider (still capped at the browser width). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
e181015fd1 |
MCP save: a folder the agent opened or saved a design in stays in scope (#7181) (#7216)
* claim: #7181 * MCP save: a folder the agent opened or saved a design in stays in scope (#7181) The agent's default folders held the open design's folder only while that design stayed open there, so after a new design, an opened STEP file or a save-as elsewhere a save beside the earlier design was refused, while the same save through the control port worked. The MCP server now keeps, for the rest of its run, the folder of every design file a call opened or saved (open, save, and doc.open, file.save, file.save_as through execute or batch, path given in full) and, headless, of every design open in its session. Such a call only succeeded because the folder was already in scope, so naming a path adds nothing. The folders get the open design folder's terms (inside home or temp, not hidden, hidden entries unreachable), at most 16. Bridged, they go to the app as design_folders, which it judges the same way. The save tool description and docs/mcp.md say how to add a folder with --allow-path. * MCP scope: a design's folder is the folder its file resolves to (#7181) A link in another folder to a design inside the agent's folders passes the scope check, which follows it, but its own folder was what got remembered (and, for the open design, what counted while it was open). Take the folder of the file as the check resolves it. * Control test: a hidden file the export format accepts (#7181) --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
03b8f4138b |
New designs save as .sc; .solidcraft files still open (#7325)
* claim: new designs save as .sc Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * New designs save as .sc; .solidcraft files still open and keep their name on Save DESIGN_EXT is now "sc"; DESIGN_EXTS lists sc, solidcraft and solvecraft and every open path (dialogs, drag-drop, recent files, CLI, MCP, links, the web picker) accepts all three. Save of an opened .solidcraft file writes that file; Save As, autosave, recovery and crash reports use .sc. Windows, macOS and Linux register .sc alongside the older extensions. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Update UI tests for the .sc default extension Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
7a6c884418 |
Change the app id to io.tangencylabs.solidcraft, with aliases for existing installs (#7681)
The app id moves from ai.storyteller.solidcraft to io.tangencylabs.solidcraft: macOS bundle id (the CLI signs as io.tangencylabs.solidcraft.cli), Linux desktop/metainfo/MIME file names, icon name, Wayland app_id / X11 class, Flatpak, Snap common-id, nfpm/FreeBSD/Nix/AppImage staging, the web app's icon paths and the docs. Existing installs keep working: the Flatpak repository marks both old ids (ai.storyteller.solidcraft and ai.storyteller.solvecraft) end-of-life with a rebase straight to the new id, re-marking the solvecraft ref that pointed at the 0.8 id; the manifest grants read-only access to both old ~/.var/app folders and the first launch copies settings and autosaves from the newest one; AppStream <replaces>/<provides> and X-Flatpak-RenamedFrom list both; the AppImage removes menu entries it wrote under either old id. The data and settings folders (solidcraft / SolidCraft) are unchanged. The MSI UpgradeCode and ProgIDs are unchanged. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
d2f0627421 |
Follow a theme file and reload it when it changes (#7573) (#7574)
* claim: #7573 * Follow a theme file and reload it when it changes (#7573) * Translate the follow-a-theme-file strings |
||
|
|
0d18757ed7 |
File dialogs open in the folder used last (#7756) (#7807)
* claim: #7756 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * File dialogs open in the folder used last (#7756) The desktop dialogs never said where to open, and the Linux ones then start in the home folder every time. Open, Insert, attach, Save As and Export now open in the folder of the file last chosen in a dialog, or of the open design when another design becomes the open one, whichever came last. Also fixes #7735. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
9a7b657fdc |
Assistant: connect the last-used agent on startup (#7009) (#7124)
* claim: #7009 * Assistant: connect the last-used agent and open the panel at start (#7009) Two Settings > AI options, off by default: when SolidCraft starts, connect the agent started last (once the installed agents are known; a missing one is not swapped for another) and open the Assistant panel. Not for runs started with --control. A connection that never gets ready (no agent, start error, the agent ends while starting) is a new Failed state: the header reads Connection failed and Connect reads Retry. The control channel reports it as "failed" and takes connect_at_start / open_at_start. * Assistant: keep the start-up agent when a design replaces the blank one (#7009) Opening a design over the blank design SolidCraft starts with reset its chat and stopped the agent connected at start. A chat not asked anything yet now starts over in place and keeps its agent. Turning AI features off also drops a start-up connection still waiting for discovery. * i18n: Arabic, Hebrew and Vietnamese for the start-up options (#7009) ar, he and vi are complete catalogs on main now, so every new English message needs them. --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
2346c1ae81 |
Web app: Report a bug saves its screenshot as a download (#7192) (#7197)
* claim: #7192 * Web app: Report a bug saves its screenshot as a download (#7192) Save screenshot… wrote the PNG with image's save, that is std::fs, which the browser doesn't have. The screenshot is now encoded in memory and written through vfs, as every other save is, so the web app hands it out as a download. Natively the same file is written and ui.screenshot replies as before. A failed save says why in plain text instead of a Rust debug value. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Web app: a screenshot without a path no longer panics (#7192) `ui.screenshot` without a `path` saved to `std::env::temp_dir()`, which panics on wasm32-unknown-unknown (std has no file system there), and the web app's control requests come through `window.solidcraft.request`. `vfs::temp_dir()` now returns `vfs::BROWSER_TEMP`, a folder of the in-memory files, in the browser, and `save_screenshot` and `vfs::design_folder_refusal` (reached when a request names `allow_paths` while a design is open) use it. Natively nothing changes. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Web app: keymap and theme exports download (#7192) Both exports wrote with `std::fs::write`, which always fails in the browser. They now write through `vfs::write` like the other saves, so the web app hands the file out as a download. Natively the file is the same; an agent's folder scope now applies to them as to every other write. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Tests: say what the folder-scope checks of the saves show (#7192) The screenshot test wraps the write in a folder scope by hand: that proves the write goes through vfs, not that ui.screenshot's write runs inside the request's scope. ui.screenshot checks the agent's folders when the request arrives; the PNG is written in a later frame, outside that scope, as on main. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
4ad285570c |
Control channel: retire a subscription when the events thread ends (#7226) (#7336)
The seat of a subscribed connection on the DesignWatch lived in the connection's serve thread. It left only when that thread saw the end of the stream, so one unbounded blocking read stood between a closed client and the count. Under load (GPU backend probing and crash-dump children on Windows) that read can sit for seconds; the test's 10 s deadline then expired and `!WATCH.subscribed()` failed (#7226). Move the seat onto the events thread. The thread ends on `stop`, or on the first write a closed client refuses, so the next publish retires the seat. The test now publishes while it waits, and its wait no longer depends on the serve thread. |
||
|
|
ae3d4faf53 |
macOS menu: disable design commands behind an open Report a bug draft (#7188) (#7193)
* claim: #7188 * macOS menu: disable design commands behind an open Report a bug draft (#7188) The native menu bar kept running its actions while a Report a bug draft was open, although the app's own toolbar and shortcuts wait behind it: Edit > Undo or Cmd+Z removed the last feature, so the report described a design that no longer existed. FileAction::enabled now refuses every action but Quit while a draft is open. Settings, Keyboard Shortcuts and Agent Chat are refused too: their windows open over the report but take no input until it closes. The menu's Undo and Redo still go to a focused report field (FileAction::menu_enabled), which no longer leans on Settings being enabled. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Menus: Quit and Help's windows wait behind an open Report a bug draft Quit switched to the first design with unsaved changes under the draft and asked about it in a prompt that can't be answered while the report blocks the app; with nothing unsaved it quit and lost the typed report. Like any modal window, the draft now turns Quit off. Help's items that open a window (About, Keyboard Shortcuts, Messages, Crash Reports, Connect AI assistants) wait too, in the native menu and in the app's Help menu; Documentation and Report an Issue… stay. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
6b7f1934b1 |
Startup tests: start the backends the app would, no OpenGL driver on Windows (#1156) (#7217)
* claim: #1156 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Startup tests: start the backends the app would, no OpenGL driver on Windows (#1156) The software-adapter test enumerated every wgpu backend and the probe test asked OpenGL on its own even where the app stops at D3D12, so both loaded the GPU vendor's OpenGL driver (atio6axx.dll on AMD) into the test process, where it once aborted the process at exit with c0000409. The adapter test now starts what the software renderer starts (D3D12 alone on Windows) and the probe test probes in the app's order, stopping at the first backend with a GPU. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Startup tests: read the software renderer's backends from wgpu_options Review: the adapter test now takes the backends from the app's own wgpu_options(true, None) instead of a copy of its choice, and the probe test no longer re-checks the order choose_backends' own test covers. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
9d01dcb358 |
Open from computer: let iOS and iPadOS pick .solidcraft files (#6977) (#7351)
* claim: #6977 * Open from computer: let iOS and iPadOS pick .solidcraft files (#6977) The iOS file picker matches an input's accept list by system file type, not by extension. No system type has the .solidcraft extension, so the designs were greyed out. On an iPhone or iPad the file inputs now offer every file; other devices keep the extension filter. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
b47f82d406 |
Reopen the designs open at the last quit (#5542) (#6006)
* claim: #5542 * Reopen the designs that were open at the last quit (#5542) A launch with no file to open reopens the saved designs that were open when SolidCraft was last closed, in tab order. Designs never saved and files that are gone are skipped. Preferences > General > Reopen designs turns it off; a launch driven over --control or with --sample starts fresh. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Move the new messages to a pending locale file Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com> |
||
|
|
a7c1909766 |
CLI: evaluate scripts on the input design (#6861) (#6872)
* claim: #6861 eval scripts on input designs * fix(cli): evaluate scripts on the input design (#6861) * fix(cli): validate eval options before opening inputs Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
3726959d82 |
Control channel: check the token before parsing the whole request (#6643)
Until a connection had shown the token, its first line (up to 16 MiB) was parsed whole into a JSON value. A line of [0,0,...] that size is hundreds of MB once parsed, so 16 connections without a token could make the app run out of memory and lose unsaved work. The token is now read from the request object without building the rest of it: other fields are only skipped, and anything but an object with a string token is refused as before. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
ebb6cc53ab |
Crash reports: capture native crashes on macOS (#2113) (#6593)
* claim: #2113 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Crash reports: capture native crashes on macOS (#2113) A signal handler for SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP and SIGABRT writes the same <journal>.native.json as the Windows exception filter: the signal, the faulting module and offset, the thread and a frame-pointer walk. The next start reports it instead of "an unclean exit". The signal then goes on to the previous handler or the default action, so macOS still writes its own crash report. native_crash_macos.rs joins the crash-safety skill's list of files that may use unsafe (no safe API can catch these signals). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
afd6a5c584 |
Send to Slicer: send the selected bodies to a slicer (#2595) (#3600)
* Add Open in Slicer for the selected bodies (#2595) One command saves the selected bodies as a 3MF in millimetres (an STL if the 3MF can not be written) and opens it in the last slicer used. It is on the File menu, the Mesh tab and the body right-click menu. The first time, or when that slicer is gone, it asks which one with the same list Save as mesh uses. The Save as mesh dialog is unchanged. * Send slicer files to a private per-user folder (#2595) Files sent to a slicer used to go to a shared folder in the temp directory. They now go to the user cache folder (mode 0700 on Unix), under a name that stays the same for the same design and bodies, so sending again replaces the file and the slicer can reload it. The file is written to a temporary name and renamed into place. If the name can not be replaced, as on Windows while the slicer holds the file open, the copy gets a number and the status line says so. Files older than seven days are deleted at startup. The first send tells the user that sending again replaces the open file, and so does the tooltip of Open in Slicer. Send to slicer in Save as mesh uses the same path. * Open files in a running slicer (#2595) PrusaSlicer, SuperSlicer, Bambu Studio and Cura are started with --single-instance, so a slicer that is already open loads the file instead of opening a second window. OrcaSlicer has no such flag and is left alone, and macOS bundles are single-instance already. PrusaSlicer 3.0 ships a launcher entry that already carries --single-instance-on-url; it keeps that one and never gets a second flag. It is a preference, on by default, and scripts can pass single_instance. Preferences also gets a button to forget the slicer Open in Slicer remembers. * List slicers the desktop entries say open 3MF or STL (#2595) On Linux the scan of desktop entries now also lists a program that claims 3MF or STL in MimeType, even when it is not in our table of known slicers. The table still supplies names, ids, icons and flags for the ones it knows. Entries marked NoDisplay or Hidden are skipped, and so are terminal programs and SolidCraft itself. The existing size and count limits stay. The Windows scan now looks inside a Prusa3D folder, where PrusaSlicer installs itself. * Only start slicers the user can see or chose (#2595) file.save_mesh took a slicer parameter that could be any executable path, so a script or an MCP client could run any program. The slicer now has to be one of the detected slicers (by id or name) or a program the user already added under Custom, which the app hands to the engine from its settings. The same rule holds for file.open_in_slicer. The agent chat already asked before any file command; its question now also names the slicer. * Review fixes for Open in Slicer (#2595) The file name hash keeps all 64 bits instead of 32. When Open in Slicer has to fall back to an STL, the status line now says so. The engine test that sets the chosen programs clears them again. The unused "could not make the folder" message is gone from the catalogs, and the docs say plainly that finding slicers by file type is Linux only. * Keep unsaved designs apart and hide Open in Slicer in the browser (#2595) Two unsaved designs with the same name and body names got the same file in the slicer folder. Every document now has a uid that is new for each New, Open and Recover and stays the same for the life of the document, and the file name uses it (with the process id) until the design has a path. At the first Save As the name changes to the path-based one, so the slicer gets one new file; the old one goes with the seven-day sweep. The browser can not start a program, so Open in Slicer is now disabled there: the engine command reports why, the File menu item and the body and component right-click items are greyed, and starting it anyway says so on the status line instead of opening a dialog. The Save as mesh dialog keeps its browser guard for the open flow too. * Put the Session doc comment back on Session (#2595) The new NEXT_UID static had landed between the doc comment and the struct it describes. * List every install of a slicer, and test the first Save As (#2595) Detection kept one entry per known slicer, so a system PrusaSlicer 2.9 and a Flatpak 3.0 beta showed up as one. Every distinct install is listed now. The same program found twice, through a desktop entry and through PATH, is still one. When a slicer has several installs, each gets an id made from where it was found (prusa#comprusa3dprusaslicer) that stays the same on every run, and a name worked out from its command and location without running anything: PrusaSlicer (system), PrusaSlicer (Flatpak, beta), PrusaSlicer (AppImage). A lone install keeps its plain id and name. The plain id or name still picks the first install, so a remembered "prusa" keeps working. Single-instance flags and the other per-slicer behaviour go by the id without the install part. Also a test that the first Save As changes the file name once and later sends keep the name that comes from the saved path. * Start PrusaSlicer 3.0 first and send the file once it is ready (#2595) PrusaSlicer 3.0 starts through slic3r-app-launcher, which ignores a file given at a cold start whatever the flag, and loads it over D-Bus when an instance is already running. A small table in slicers.rs names such slicers by their command; today it holds that launcher, so PrusaSlicer 2.9 and OrcaSlicer are untouched. Ready means a name starting with com.prusa3d.prusaslicer.BroadcastListener. is on the session bus, read from busctl --user list with no new dependency. If busctl is missing or fails, nobody waits and the file is sent as before. When the slicer is not ready, Open in Slicer starts it without the file and looks every 200 ms for up to 10 seconds. The wait runs on another thread, so the window stays live, and the status line says Starting PrusaSlicer. Once the name appears the file is sent with the same arguments as before. If the limit passes, the status line says the slicer did not respond, that the file is already saved, and to send again. A second click during the wait only repeats the Starting line, so there is one launch and one send. Scripts calling file.open_in_slicer wait inside the command by default, or pass wait: return or no. * Always show the slicer picker for Open in Slicer (#2595) File > Open in Slicer, the Mesh tab entry and the right-click entry now always open the picker, with the slicer used last time pre-selected, so the usual case is one click or Enter. Scripts and file.open_in_slicer with a slicer still send without a dialog. The preference button that forgot the remembered slicer is gone: it could no longer make anything ask again, and it did not clear the pre-selection either. The guide says how it works now. * Leave Bambu Studio out of the single-instance list (#2595) Open files in a running slicer now adds --single-instance for PrusaSlicer, SuperSlicer and Cura only. Bambu Studio is started as it is, so it may open a second window. A test pins that, for the detected slicer and for one the user picked as a custom program. The guide and the preference tooltip no longer name Bambu Studio as getting the flag. * Sort the English catalog and leave features.md to the generator (#2595) cargo xtask lists wanted one message moved in en.json after the rebase. docs/features.md is written by the Generated files workflow on main, so the row I had added by hand is gone from this branch; the workflow adds Open in Slicer when it lands. * Drop the unused folder message from the Vietnamese catalog (#2595) Vietnamese arrived on main after I removed ui.save_mesh_temp_failed from the other catalogs, so the check that every translated id exists in English failed on it. Nothing uses the message any more. * Say so when a started slicer can not be found again (#2595) After Open in Slicer had started a slicer on its own, a failure to look it up again to send the file just returned, so the status line stayed on Starting and then nothing. It now says the slicer was started, that it can not be found to send the file, and where the file is saved. A test covers it. * Say why a failed busctl ends the wait (#2595) If busctl fails partway through a wait, the wait stops and the file is sent, the same as when busctl can not be run at all. That is on purpose: a file sent too early is dropped quietly and costs one more send. A comment in wait_for_ready says so. * Keep the readiness wait inside its limit (#2595) wait_until asked the probe before checking the deadline, including right after a sleep, so a yes could be accepted after the limit, and busctl ran with no timeout, so one look could outlast the whole wait. The deadline is checked first now, the probe is told how much time is left, and busctl is given at most two seconds (less near the end of a wait) and is killed after that. A hung busctl counts as not telling, which sends the file as before. This covers the first look on the UI thread too. Tests cover a slow probe, the shrinking time left, and a fake busctl that hangs, answers and fails. * Send the file that was already written once the slicer is ready (#2595) When the wait for a started slicer ended, the UI ran file.open_in_slicer a second time. That exported the design again on the UI thread, from whatever the session looked like by then, and could write a numbered copy while the timeout message still named the first file. The wait now keeps the slicer it found and the answer of the first call, and opens the file that was written. A test changes the design during the wait and shows the same file is sent, is not written again, no command runs, and no second file appears. * Send with the single-instance flag after starting a slicer (#2595) After Open in Slicer has started a launcher that needs a start first, the file has to reach the instance that is now running, so the send that follows a start carries --single-instance whatever the preference says. A normal send, to a slicer that was already up, still follows the preference. A comment in both places says why. The test uses a plain launcher command with the preference off: the normal send has no flag and the send after a start has it. * Find the remembered slicer again after an uninstall (#2595) With two installs the remembered key is prusa#prusaslicer. Remove the other install and the lone one is plain prusa, which matched neither the exact key nor the plain-key fallback, so the picker fell back to the first slicer in the list, maybe a different one. The key is now also matched by the part before the #, so the same slicer is pre-selected. A test covers the lone install, a plain key with two installs, an exact key, and that another slicer is never picked. * Say a second click did not send anything while a slicer starts (#2595) While a started slicer is being waited for, another click showed Starting <the first slicer> even when it had picked another slicer or other bodies. It now says it is still waiting for that slicer and that nothing else was sent. The test checks the wording and that it names the slicer being waited for. * Label macOS installs by their application (#2595) An open -a command resolved its program to /usr/bin/open, so every application on a Mac was labelled system. Labels for open commands now come from the .app path: /Applications is system and a folder under home is shown as ~/Applications. A test with two PrusaSlicer.app bundles and a made-up home checks both labels and that the ids differ. * Pick the same place for a program found twice every time (#2595) When two desktop files, or a desktop file and PATH, pointed at one program, the first one read was kept and its file name went into the id, so the ids could change with the order the folders were read in even though nothing was installed or removed. The place that sorts first now speaks for the program. A test with two aliases and a second install lists them with the folders in both orders and gets the same ids and commands. * Treat flatpak run spelled two ways as one install (#2595) flatpak run ... and /path/to/flatpak run ... with the same arguments had different install keys, so one invocation could be listed twice. The launcher is now compared by its file name and the arguments are kept, so both give the same key, while a different branch is still its own install. The test uses a real launcher file so the full-path entry is not skipped as stale. * Say plainly that a late yes is accepted on purpose (#2595) The comment on wait_until said a slow probe could not accept a yes that came too late. That was not what the code does: no probe is started after the limit, but one already running may finish and its yes is taken, because the file should still go. The comment now says so, with the bound: the limit plus that last probe, which in production is given the time left and so ends by the limit. A test has a probe that runs past the limit and says yes, and checks it is accepted and the wait stays within limit plus the probe time, and that a probe that says no is not followed by another. * Give reading busctl the same deadline as running it (#2595) After busctl exited, the output was read with a join that could wait forever if a process it left behind kept the pipe open. The reader now hands the text back over a channel and the wait uses the time that is left of the same limit, and gives up with nothing otherwise. The polling sleep no longer overshoots the time left either. A test uses a fake busctl that backgrounds a sleep with its output inherited and exits at once: the call returns within its limit. * Tell two different flatpak launchers apart (#2595) Comparing only the file name of the launcher made /opt/tool-a/flatpak run ... and /usr/bin/flatpak run ... with the same arguments one install even when they are different programs. The launcher is now found the way any program is, through PATH and with links followed, and its name stands in only where it can not be found. The test has flatpak on PATH and the same file by its path as one install, a different executable of the same name as a second, a different branch as a third, and the fallback when there is no PATH. * Keep waiting when busctl is slow, send only when it is missing or fails (#2595) Since the busctl timeout, a slow busctl came back as "can not tell", and that was read as send now. One slow look, likely just when a cold PrusaSlicer 3.0 is starting under load, ended the wait and sent the file early, which gets dropped. The look now says why it has nothing: slow means not up yet, so the wait goes on to its limit and then reports that the slicer did not respond; a missing or failing busctl still means it can not be told and the file is sent. The comments name only those two cases. Tests use fake busctl programs: one that hangs keeps the wait going to the limit and times out, a missing one sends at once, one that says not up and then fails sends, and one that names the slicer is ready. * Do not open an empty path when the answer had no file (#2595) If the answer kept for a started slicer had no path, the send ran open with an empty string. The tick now says there is no file to send and starts nothing. The test gives a wait with no path, checks the error line, and that the fake slicer was never run. * Drop the unused folder message from the Danish catalog (#2595) Danish arrived on main with ui.save_mesh_temp_failed, which this branch removed from English because nothing uses it any more, so the check that every translated id exists in English failed. The entry is gone from the Danish catalog too. * Always start the 3.0 launcher with the single-instance flag (#2595) A hand run showed that starting the PrusaSlicer 3.0 launcher with no file while a 3.0 is already running forwards to it and exits when the flag is there, but opens a second full window when it is not. A slow first look at the bus can start the launcher twice, and with the preference off the flag was stripped. A slicer that has to be started first now keeps the flag on that start whatever the preference says, the same reasoning as the send after a start; when nothing runs the flag does no harm. A normal send with the preference off still has none. The test covers the launcher entry, a bare launcher command, a normal send and a slicer that is not on the table. * Swap --single-instance-on-url where it does not hand the file over (#2595) A hand run on the PrusaSlicer 2.9.6 Flatpak showed that its entry's --single-instance-on-url does not forward a file to the running instance: every send opened a new one, three after a cold start and two sends. With plain --single-instance the second process finds the first, forwards, and exits. So when a command carries --single-instance-on-url and the slicer is not on the wait table, that is, not the 3.0 launcher, it is replaced by --single-instance, with the file markers handled as before, when the preference is on, and stripped when it is off. On the 3.0 launcher the flag does forward and stays. The comment on the rule says why. A test uses the real 2.9.6 and 3.0 Flatpak command lines. * Cut long slicer names to fit the picker (#2595) With installs listed on their own, a name like PrusaSlicer (Flatpak, master) is wider than its row. The list painted it with no limit, so it ran out of the popup, and the closed selector wrapped it onto a second line. The list now lays the name out on one line that ends in an ellipsis when it does not fit, the selector truncates, and the full name is in the tooltip when it was cut (for a program the user added, ahead of the delete hint). A test checks that a long name is cut to one line within the width and a short one is left alone. * Keep the 3.0 launcher's flag on a send whatever the preference says (#2595) A hand run with the single-instance preference off showed the 3.0 launcher needs its flag on a send too, not only on a start: a cold start with a file and no flag loaded nothing, and a send to a running 3.0 left a launcher process that never forwarded. A slicer on the wait table now gets the flag on every launch, as it already did when started alone. The doc comment says why. The preference text, in English, Japanese and Chinese, and the guide now say that PrusaSlicer 3.0 is the exception to turning this off. The tests that took the flag away with the preference off now expect it, for the launcher entry, a bare launcher command and the 3.0 Flatpak line; the test of the send in the UI checks the first send carries it. * Keep the install-flag swap to PrusaSlicer, found by what it is (#2595) The swap of --single-instance-on-url for --single-instance ran for any program whose command had the flag, so another program with that flag would have been rewritten. It is now a PrusaSlicer rule: it applies to a slicer recognised as PrusaSlicer by its identity, its id or, for a program the user picked, the name it goes by, never by a version number. The single-instance table uses the same identity check. A test keeps the flag of a program that is not PrusaSlicer, strips it when the preference is off, and swaps it for a picked program named PrusaSlicer. * Do not promise a hard bound in the wait comment (#2595) The comment on wait_until said the production probe ends by the limit. Its clock starts after the process is spawned, and killing and reaping the process and scheduling are not bounded by it, so it is a polling and read budget with process overhead on top. The comment says that. Comment only. * Tell PrusaSlicer 2 from 3 by the installed version (#2595) PrusaSlicer 2 and 3 need different handling, and the rules had to guess from the command line. Each install of PrusaSlicer now carries its major version, read when it is detected from the release at the top of its appstream metadata and never by running the program: a Flatpak's own files (the branch the command names, else the current one), or the metainfo file beside a desktop entry. PrusaSlicer older than 3 is sent the file with --single-instance in place of --single-instance-on-url, which does not hand a file over there, and is not waited for. PrusaSlicer 3 and newer keeps the launcher's flag, is started on its own, waited for, and sent the file. When the version can not be read, the command decides as before: the slic3r-app-launcher launcher counts as 3, and any other entry is left as it is. A program that is not PrusaSlicer is untouched whatever its flags. Tests use metadata fixtures, no Flatpak: 2.9.6, 3.0.0-alpha10, a branch that is not installed, a system package, an unreadable version with and without the launcher, and a non-PrusaSlicer program with the same flag. * Make the busctl wait tests steady under load (#2595) One of them failed once in a full run at its first assertion and passed alone. A script that has only just been written can fail to start (text file busy) while another test forks, and that reads as a busctl that is missing. The fake programs are now started once, patiently, with a flag they answer at once, before a test relies on them; a hanging one uses exec so it is killed cleanly. The time bounds that could trip on a busy machine are several seconds now, and the checks are on outcomes: not ready and keeps waiting, send now, and the number of looks. Thirty runs alone, thirty of the whole slicers filter and thirty of the busctl tests under eight busy loops all pass. * Say what the busctl reader thread leaves behind (#2595) The thread that reads busctl output is left to end when the pipe closes. A busctl that answered but left a process holding its stdout reads as slow, and every poll of such a bus can leave one blocked reader behind until that process lets go. A comment next to the thread says so. Comment only. * Make Save as mesh a plain export (#2595) Save as mesh asked for the bodies and the format, and could also send the file to a slicer with a checkbox and a slicer list. Sending now has its own command, so the checkbox, the list and the Send label are gone from this dialog: bodies, format, a file dialog, Save. The two settings that only the checkbox used, save_mesh_send and save_mesh_slicer, are no longer kept; a settings file that still has them loads, and they are ignored. The strings only they used are gone from the catalogs. The slicer list stays in the dialog of Open in Slicer. file.save_mesh keeps its slicer parameter for scripts. The guide describes the two as separate. * Rename Open in Slicer to Send to Slicer (#2595) The command sends a file to a slicer rather than opening one, and a later Send to App can share the name. File menu, Mesh tab, right-click menus, the dialog button, status lines, the guide and the English, Japanese and Chinese strings now say Send to Slicer, and the command id file.open_in_slicer is file.send_to_slicer. It is new in this change, so there is no alias. The remembered slicer is stored as send_slicer, and the question the agent chat asks says send to. Module and type names stay as they are. * Put the send targets in one table and one send pipeline (#2595) The known slicers, the list of slicers with a single-instance flag and the rule for slicers that must be started and waited for were three separate things. They are one table of targets now: id, label, kind, names and program files, accepted formats and the default, how the file is handed over, the single-instance flag, the version from which PrusaSlicer's on-url flag hands a file over, and the wait-for-ready rule. Programs that are not in the table are slicers with the same defaults. The kind is slicer, the only one so far; its comment says it is where a later Send to App would plug in. The send itself is one function: write the bodies, find the target, start it and wait if its rule says so, hand the file over, report. Detection and resolution take a kind. Nothing changes for what already worked. file.save_mesh keeps its slicer parameter, now through the same function, with its export arguments and result unchanged: a cold PrusaSlicer 3 is started and waited for before the file goes, and it accepts the program path of a detected slicer as file.slicers lists it (file.slicers gives it as program). A path is accepted only when it is the program of exactly one detected target, and that target's own command and arguments run; a launcher several entries share, such as /usr/bin/flatpak, is refused as ambiguous, and any path nobody listed or chose is refused. The parameter and the code say it may be deprecated later in favour of file.send_to_slicer or a Send to App workflow, which is a possibility and not a plan. Tests go through file.save_mesh itself for the two reported failures, a listed AppImage path and a cold PrusaSlicer 3 that is waited for, with the slicers and the busctl made up; and they check that the result and the file are what an export without a slicer gives, and that a path that is not listed, or is shared by two entries, writes nothing. The pipeline has its own tests: a cold launcher waited for, one already up, wait return, and one that never comes up. A test of save_mesh that shared a file name with another is given its own. * Keep an AppImage's id through an upgrade (#2595) When a slicer has several installs, each gets an id made from where it was found. For an AppImage that was its file name, which carries the version, so upgrading it changed the id and the remembered choice missed. The id is now made of the slicer's id, the fact that it is an AppImage and a short hash of its folder, so a new version that replaces the old one in the same folder keeps the id, and the same AppImage in another folder is its own install. Two versions kept side by side in one folder are two installs: while both are there, their file names are added to their ids to tell them apart. A remembered id is found again only when it names exactly one install. An id that was one AppImage and is now two versions, or a plain id that is now several installs, is treated as not remembered, so the picker starts from the first entry as on a first run and does not quietly pick another install; a single install left of the same slicer is still found, as before. Installs that are not AppImages are told apart as before. An id from before this change no longer matches. Tests cover an upgrade, two versions side by side, a second folder, and the picker's side of each case. * Add Open with EasyPrint to Send to Slicer EasyPrint is Printables' slicer in the browser. It's a plain text row in the Send to Slicer dialog, backed by a new file.open_in_easyprint command. The command exports the bodies as a 3MF (or STL), hands them to the host to upload to slicer.printables.com/import, and the app opens the link that comes back. The desktop app uploads with ureq and the browser build with fetch, so this is the one send target that works on the web. The model leaves the machine, so the command refuses without consent: true, the dialog asks once and remembers, and an AI agent's request asks first. A model over 100 MB is refused before anything is sent, and a failed upload shows as an error with the reason. The chat's privacy note said SolidCraft sends nothing anywhere, which isn't true any more, so it now says that about the chat. New strings are in every catalog. * Place Send to Slicer on the Insert Files panel |
||
|
|
30f951ecf9 |
Navigation bridge: a device's own app moves the view (#6094)
A homemade 3D input device's driver app (MAKMOUSE) listens on a loopback port; with Preferences > Navigation > "Navigate with a device app on this computer" on (off by default), the desktop app connects, says hello and reads JSON lines: axis motion (orbit, pan or zoom by mode), zoom steps and standard views. The motion goes through navigation::device like a 3D mouse's, only in the focused window; a HID device the app names is left to it. Documented in docs/3d-mouse.md. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
66b872a749 |
Web app: open a design from a same-origin path (#6670)
?open= now also accepts an absolute path on the page's own origin, fetched with the page's scheme, so a self-hosted setup that serves SolidCraft and other tools under one origin can link a design on a LAN without a public HTTPS address. Absolute URLs keep the HTTPS-only rule (a URL on the page's own origin is also accepted), redirects must end on HTTPS or the same origin, and protocol-relative, dot-segment, backslash and control-character values are refused. |
||
|
|
d895fef354 |
Control channel: a pushed design.changed event for clients that subscribe (#6985) (#6986)
* claim: #6646 * Control channel: document.revision, a design revision and a document id (#6646) A program that follows the open design asks document.revision and exports only when the answer moves: document_id names the open design (kept through edits, saves and renames, another for each design started or opened, never shared between two tabs or two runs) and revision moves whenever the design, what is hidden or an uncaptured component position changes. It stays put on reads, selections and view changes, unlike the session's view revision. The revision is read lazily: the session remembers the design it last reported (held weakly, so Arc::make_mut can never change it in place and its address can't be reused) and takes a new number from one counter for the whole run when the design is another one. The control method answers at once, also while a slow command computes; engine.execute reaches the same command for scripts and MCP. * document.revision: hash the run's id prefix with the process's random keys A clock set before 1970 gave every run the prefix 0, so a restarted app could answer a new design with the id and revision of the old one. The docs no longer promise an answer at once: a screenshot waiting for an opened design to be meshed still holds the requests behind it. * document.revision: its label in the complete catalogs (ja, zh) * claim: #6985 * Control channel: control.subscribe and design.changed events (#6985) A connection that sends control.subscribe gets the active design's id and revision in the reply (as document.revision answers), then a {"event":"design.changed","params":{document_id, revision}} line whenever either changes, so a live link need not poll. The window publishes the design at the end of each frame's logic and drawing while a connection is subscribed (one atomic load otherwise). Each subscribed connection waits on that from a thread of its own and writes the latest after a 100 ms gap, so a burst of changes is one line. Replies and events share one lock per connection, each written whole (#6390). * control.subscribe: the reply before any event, a second one refused The events thread started before the subscribe reply was written, so a change right after the window's answer could reach the client before the reply that named the older revision. The subscription now starts holding the connection's line lock and writes the reply under it. A second control.subscribe on a subscribed connection is refused on the connection itself: its answer could arrive behind a newer event. When no thread or socket is left for the events, the reply says it did not subscribe instead of ok. * control.subscribe: a second one does not lose a finished late reply The already-subscribed answer came before the busy check, so a request that timed out and had finished since lost its reply: control.pending then said the app ended it without one. It now comes after the busy check and drops a finished late reply as every other request does. * control_server: declare the subscribe guard at the top of the loop Clear of the lines #6643 changes (its token check moves to where the declaration was). * control_server: the subscription's items beside serve Away from the lines next to send, where #6643 adds token_of. * control test: New on a blank design reuses its tab, so redo the box first --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com> |
||
|
|
03bf992bc1 |
Keep linked components valid through Undo after Save As (#6860) (#6877)
* claim: #6860 * fix: preserve linked component targets across Save As history (#6860) |
||
|
|
c264c7a42a | Startup falls back from a Direct3D 12 that can't build the UI pipeline (#6648) (#6682) | ||
|
|
189b47c750 | Chamfer and Fillet refuse a point where several edges meet (#5173) (#5177) | ||
|
|
0c4eb458df |
macOS 3D mouse: unregister from the driver when the app ends, so the next launch gets the mouse (#6114) (#6115)
* claim: #6114 * macOS 3D mouse: unregister from the driver when the app ends, so the next launch gets the mouse (#6114) |
||
|
|
b3cbbe7bd5 |
CLI: reject incomplete and unsupported run/eval options (#6918) (#6919)
* claim: #6918 validate run and eval options * fix(cli): reject invalid run and eval options (#6918) |
||
|
|
36a60a70d9 | Graphics: 1x anti-aliasing where the multisampled view draws nothing (#5819, #5870) (#5832) | ||
|
|
0344a41dc4 | Open and insert a DXF outside a sketch (#2052) (#4635) | ||
|
|
492bba9242 |
Control channel: write each reply in one piece (#6389) (#6390)
* claim: #6389 * perf: write each control reply to the socket in one piece The control server wrote each reply with writeln!(out, "{reply}") on the unbuffered TcpStream. Formatting a serde_json::Value hands the writer every string, number and punctuation mark separately, so each became its own write system call. A reply of a few megabytes (component.list on a design with thousands of components) took about half a second to send. Every reply is now serialized to one buffer and written at once. Writing one large Value to a loopback TcpStream: 1.79 MB took 1,052 ms with writeln! and 4.9 ms with one write_all. The test counts the write calls for a 2000-component reply (one) and reads it back. |
||
|
|
b1da434458 | Graphics: choose the graphics card, honour WGPU_ADAPTER_NAME (#5986) (#6010) | ||
|
|
4cd9a4f4d4 |
Web app: open a design from a link, and an embed mode (#6252) (#6253)
* claim: #6252 * Open hosted designs in the web app and add an embed layout Fixes #6252. Fetch HTTPS design links with bounded reads and open them as unsaved copies. Keep model panels and joint controls in embeds without browser persistence, application chrome, or unload prompts. Add a full-app link and iframe docs. Cover query parsing, hostile URLs, size limits, and the compact layout. * Translate the linked-design messages into Japanese and Chinese |
||
|
|
093571cfe4 |
Connect AI apps at start-up, with a preference to turn it off (#6388)
At launch the app adds the solidcraft entry to each installed AI client off the window thread, names newly connected clients once, and refreshes a stale path. Settings > Assistant has "Make SolidCraft available to AI apps on this computer" (on by default); off removes the entries it added. Entries the user changed are left alone; automation runs never touch the files. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> |
||
|
|
16a5254e97 |
Fix macOS fullscreen application-bar interaction (#3643) (#3690)
* claim: #3643 * fix: keep macOS fullscreen application bar clickable (#3643) * test: load bundled fonts for fullscreen regression |