Commit Graph
597 Commits
Author SHA1 Message Date
DuBearteandClaude Opus 5.5 5439bfc0b5 Expressions: a decimal comma inside plain parentheses (#9408) (#9447)
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:34:56 +00:00
Mario GeigerandClaude Opus 5.5 332f96c26a Point clouds: colour and filter by any property the file carries (#8816) (#8819)
* Point clouds: colour and filter by any property of a PLY file, on range tracks (#5151)

A PLY file's other vertex properties are kept as named numbers on the
points (whole-numbered for integer types; a comment `property: 0 name,
1 name` names a label's values). A cloud is coloured by any of them, a
ramp or a palette for whole numbers, and filtered by up to eight, each a
range or a set of named values. The GPU colours and filters the points
itself, so editing a range uploads nothing.

In the Edit Point Cloud card each range is a track, as in an audio
editor: a histogram of the property over what the other filters keep,
stacked by colour, under an overview strip. Ranges are drawn, moved,
snapped to colour changes, typed (Start, End, Length, relative values)
and played (Space or Play). The automatic colour range is exactly the
values the property takes over what the filters keep.

pointcloud.insert and pointcloud.edit take color_by: <property>,
color_range and filters; pointcloud.list reports them with the
properties. docs/point-clouds.md describes it all.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: note the saved properties, colouring and filters as a pending format change (#8816)

A design now saves a cloud's per-point columns and their value names, colouring by a property and
filters; an older release must refuse it instead of dropping them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 14:02:29 +00:00
kaltenbrunnermarkusandMarkus Kaltenbrunner f331a0740b Model cache: write each set of sketch keys once, and build the states on threads (#9010)
Problem: every state of a saved model wrote the evaluation key of each sketch before it, so a
design of many sketches and many features after them repeated the same map over and over. In
the SELENE rover (5,484 features, 2,116 bodies) that was 27 of the 33.5 MB manifest: the
manifest hit its 32 MiB limit, the save thinned the cache (#3220) to 2,140 of 5,484 states, and
every open evaluated the 3,344 left-out features again. Reading the kept states one after
another took a few seconds more.

Solution: as for sheet bodies (#6152), the records keep a list of sketch-key sets, each distinct
set written once, as the keys it sets and drops relative to the set written before it; a state
names its set by place. A thinned model keeps the whole list and counts it once against its
budget. The reader counts every set's keys, and each state's, towards MAX_HELD before it copies
them (a short record can stand for a large set), then builds the states on threads
(kernel::map_on_threads) once the shared records are read. The cache format is now /5: an older
cache is a miss and the design is evaluated.

SELENE's manifest is 15.9 MB with every state kept; opening it evaluates nothing. Parse and
evaluate on opening, release build, median of 5 on a shared machine: 7.36 s -> 1.14 s. The
evaluated bodies are identical (inspect.measure of all 2,116 bodies).

Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
2026-10-30 13:28:16 +00:00
C.VengelsandClaude Opus 5.5 3c40edd12a Print face: Send to Slicer lays a body on its marked face (#8429) (#8433)
* claim: #8429

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Send to Slicer lays a body on its marked face (#8429)

A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)

Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Print face: a light tint in the viewport and its strength in Preferences (#8429)

Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:25:18 +00:00
Rick MorgansandClaude Opus 5.5 bd1525dcfb Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332) (#9334)
* claim: #9332

* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)

`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:59 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 1e5eb1e3b8 Sketch: find profiles island by island, so dragging in a large imported logo stays smooth (#6896) (#9313)
* claim: #6896

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

* Sketch: find profiles island by island and say when the search is cut short (#6896)

Every live drag frame ran the profile search over the whole sketch: every
spline piece of a large imported logo was sampled, checked for crossings
and traced again, about 100 ms per frame at 6,000 degrees of freedom.

Profile curves are now split into islands whose enlarged piece boxes do
not touch (the margin exceeds every tolerance the search uses), each
island's loops are found on their own and cached by a fingerprint of its
geometry, and the loops are nested into profiles over the whole sketch in
the order a single search finds them, so profiles, ids, holes and
whole-boundary certificates stay the same. The end-near-crossing lookup
covers its whole reach, independent of the grid's cell size.

The 50,000-piece limit now holds per island, and a sketch that still
exceeds it gets a warning instead of silently missing profiles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:52 +00:00
jeromehzl 966b10e731 Sketch: a feature on a failed sketch names that sketch (#9075) (#9276)
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
2026-10-30 09:03:46 +00:00
Steve Jason 3d744cc8a2 A formula that is a bare number gets the design unit (#9261) 2026-10-30 06:42:04 +00:00
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
bherbruckandClaude Opus 5.5 3e62553d9c Release 0.27.0 (#9106)
Fold the pending design format changes (sketch-equation-curves, timeline-joint-folders) into format 44.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 19:52:57 -04:00
SilentWolf75andCursor 355b486595 Parameters: unit-less numbers follow the other side's unit (#9015) (#9027)
* claim: #9015

Co-authored-by: Cursor <cursoragent@cursor.com>

* Evaluate bare length offsets in the design's units (#9015)

Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.

Co-authored-by: Cursor <cursoragent@cursor.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-29 21:52:23 +00:00
Colin Faulkingham 9c5a636987 Parameters: accept mixed-case text units (#8960) (#8985)
* claim: #8960

* fix: accept mixed-case text parameter units (#8960)
2026-10-29 21:11:16 +00:00
HiroKenEzandClaude Opus 5.5 c857f2fe70 parameters.add: a parameter with no unit takes the design's units (#8865) (#8880)
* claim: #8865

* parameters.add: a parameter with no unit takes the design's units (#8865)

A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.

A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 18:18:04 +00:00
Ahmad Khan a7048f41ab Sketch: equation-driven curve, a curve from x(t) and y(t) formulas (#8352) (#8353)
* claim: #8352

* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)

sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.

* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)

The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.

* Equation curve: one if for closing the sampled points (clippy collapsible_if)
2026-10-29 17:42:59 +00:00
d6d6c7d9ee Copy and paste bodies and components between designs (#3511) (#3512)
* Components: copy and paste bodies and components between designs and components (#3390)

Squashed for the rebase onto main.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* claim: #3511

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paste New: copy from a design other than the one pasted into

`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.

From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
  copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
  is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.

Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Engine: paste bodies and components copied in another design

`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
  import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
  names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
  appearances, materials, joints and motion inside them; joints to the outside stay behind.

Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: copy in one design, paste in another

Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.

The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.

Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Clipboard: what is selected wins over a design row picked earlier

Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Put the Paste from Another Design label in the pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: unground the placement before moving it (a design's first part is grounded)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drop locale keys main already folded into en.json

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pending locale: Paste from Another Design in the complete catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-29 16:31:09 +00:00
FrankandCopilot 162b3cd4ed Sketch Intersect: add Faces/Bodies and Projection Link options (#1110) (#7989)
* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)

Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Select Other: label curves from Intersect as intersected (#1110)

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

---------

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-29 16:09:18 +00:00
raykholo 3cdfec798f Timeline: joints in feature folders (#8306) (#8316)
* claim: #8306

* Timeline: joints in feature folders (#8306)

timeline.group and timeline.move_to_group take joints as well as features, so
hundreds of joints fold into one folder tile. A closed folder shows one tile
whatever it holds; opening it shows its features and joints in both the bottom
and left History. Suppress, delete and ungroup on a folder reach its joints too
(one undo step), deleting a joint removes it from its folder, and an unknown
joint id or name is an error. Saved with the design; designs without joint
folders read and write as before.
2026-10-29 15:59:18 +00:00
cronos 28e26209f3 Assembly Move: drag allowed joint freedoms (#6679) (#6904)
* feat: add joint-aware assembly Move handles and live motion readouts

* test: improve render job failure diagnostics

* fix: preserve assembly Move compatibility and viewport theme colors

* ci: skip default label sync for fork PRs

* fix: keep Windows CI checks portable after main rebase

* test: cover RTL assembly strings and stable refraction job

* i18n: cover assembly Move in Vietnamese

* i18n: cover assembly Move in French

* fix: complete CGA palette for assembly motion handles

* fix: complete Assembly Move palettes and Turkish strings

* fix: retain assembly move cache answers and toolbar help

* style: format merged assembly Move navigation guard

* fix: align Assembly Move preferences and tests with main

* Fix offline update fixture synchronization and clipped prism intersections

Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
2026-10-29 13:57:31 +00:00
semmelrindeandClaude Opus 5.5 2d56f5d599 Construction: a vertex where another body's edge runs past stays its corner (#8650) (#8722)
A vertex pick found its named edges and then picked each again by a point
on it, among the edges of every body. At a corner where another body's
edge runs past (a wall against a side wall), all three became that edge,
and the vertex its end 3 mm away. Take each named edge's ends from the
body that has it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 08:03:31 +00:00
NOWN-DEVandClaude Opus 5.5 dd8308e835 Naming: a face swept from one of many sketch curves is named without measuring every curve (#8643)
Naming a face swept from a sketch flattened every curve of the sketch to
a polyline and measured its distance to each, for every face. On a sketch
with thousands of curves (a sheet with many cut-outs) that grew with
curves times faces. The curves are now flattened once per feature, each
with its box, and a curve whose box is farther than the best distance so
far is not measured.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:12:56 +00:00
Colin Faulkingham 99664a4d35 fix: keep expression move distances on world axes (#7234) (#8508) 2026-10-29 03:39:39 +00:00
semmelrindeandClaude Opus 5.5 800b6b4486 Saved model: read text records up to 16 MiB, so a long warning keeps fast opening (#8541) (#8607)
Open refused a saved model whose text records (a feature's warning, a body or
sketch name) held more than 65,536 bytes, although Save writes them, so such a
design was evaluated again on every open.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 01:52:21 +00:00
raykholo 0e01dc9bad Pattern counts: say when a parameter has a length unit, and refuse fractional counts (#5066) (#5337)
* claim: #5066

* Pattern counts: name a length-unit parameter, refuse fractional counts (#5066)

A count parameter created with a length or angle unit now gets an error
that names it and says to set its Unit to none. A count that evaluates to
a fraction is refused instead of being rounded silently.
2026-10-29 01:00:10 +00:00
Colin Faulkingham 5221103369 Components: a component named like the design is reachable by name (#8358) (#8423)
* claim: #8358

* Components: a component named like the design is reachable by name (#8358)

Document::find_component resolved the design's own name to the root component (id 0) before
searching the component list, so a component that shares the design's name was unreachable by
name: appearance.assign reported `no component `CurtainRailPlug`` (the same lookup serves every
command that takes a component by name).

An exact component name (or component id) match now wins over the design-name fallback; "0" and
"root" still always mean the design.

Regression test: a_component_named_like_the_design_takes_its_appearance_by_name (fails on main
with the reported error, passes with the fix).
2026-10-28 22:07:58 +00:00
raykholo 8e6a107f6e Lists many PRs add to: no written lengths, one file per theme (#7747) (#7898)
* Lists many PRs add to: no written lengths, one file per theme (#7747)

* xtask lists: the fixed-table allowlist in order, each with its own reason

* Lists: the wide-character blocks and the drawing scale presets as slices too (#7747)

* Lists: the drawing units test reads UNITS as a slice (#7747)
2026-10-28 21:33:34 +00:00
bherbruckandClaude Opus 5.5 0656819123 Release 0.26.0: fold point-clouds into format 43 (#8579)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 19:32:15 -04:00
bherbruckandClaude Opus 5.5 776653dd7c Release 0.26.0 (#8574)
Fold the pending design format change (linked-body-properties) into format 42.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 19:17:37 -04:00
e6dc105134 Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151) (#5381)
* Point clouds: insert PLY, XYZ and PTS scans as a modelling reference (#5151)

A point cloud is kept in the design as a reference, drawn as depth-tested
dots and never a body.

- io: a PLY reader (ASCII, binary little/big endian; x, y, z of any numeric
  type, optional colours, other elements skipped; counts checked against the
  file) and XYZ/PTS text, thinned evenly past max_points. PLY meshes with
  faces can also come in through file.insert_mesh.
- doc: Document.point_clouds (shared f32 points relative to an f64 origin,
  colours, units, rigid placement, size and colour), stored as a binary
  container part; format change in pending/point-clouds.rs.
- engine: pointcloud.insert / edit / delete / list; doc.open opens a cloud as
  a new design; selection.delete takes point_clouds; view bounds include them.
- gpu: an instanced point-sprite pipeline (16 bytes a point).
- ui: Browser Point Clouds folder with eyes, menu and an Edit Point Cloud
  card; drop, Open, Insert and file dialogs take .ply/.xyz/.pts; a CPU
  viewport fallback; messages in en, en-GB, ja, zh, de and ko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: colour by the file, one colour or height, from the UI (#5151)

The Edit Point Cloud card gets Color By (File Colors, Single Color,
Height). Height is a blue-to-red ramp over design Z, between the cloud's
own two heights or, by default, a range worked out from the points (all
but the lowest and highest 2 %, from an even sample). pointcloud.insert
and pointcloud.edit take color_by and height_range; pointcloud.list
reports them. The colour of each point is worked out in one place
(PointCloud::shade) for the GPU and CPU viewports.

Also: the card's dropdowns compare the picked index (a dropdown's
response doesn't report the pick, so File Units did not change either).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: integrate format registration and viewport caches (#5151)

* Point clouds: satisfy current UI audits and document comparisons (#5151)

Route model RGB data through the theme conversion boundary, provide a compact ribbon label, and include point clouds in the new document comparison. Gate the Unix-only CLI-link helper and test so Windows all-target checks remain buildable after the rebase.

* Point clouds: isolate translations for current main (#5151)

Move the existing 74 messages unchanged into one pending locale file and attribute it through a pending row, following the current repository workflow. Repository checks, 50 tooling tests, final workspace Clippy, wasm and generated-catalog equality checks passed after the rebase.

* Point clouds: fit the rebased code to main's GpuTarget and Frame

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Compare point clouds when reusing placement-independent results

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Point clouds: complete command help and required translations (#5151)

* Point clouds: size the save cap from the raised limit after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 21:17:02 +00:00
semmelrindeandClaude Opus 5.5 683535a18f Evaluation: a pattern of another component's body follows its own component when that moves (#8467)
A pattern of bodies copies them about an axis in its component's frame,
so its copies of a root body depend on where that component is placed.
placement_digest never counted a pattern's bodies, so moving the
component kept the cached copies. Read each body through placed_body,
as Combine does.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:49:55 +00:00
froglemonade2andClaude Opus 5.5 f595f38e1c Define a named parameter inline from any value input (#4071) (#7341)
* claim: #4071

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Define a named parameter inline from any value input (#4071)

Any value input, typed or sent as a command's expression parameter, takes
`name = expression` (or `#name = expression`): the design gets the user
parameter `name` with that expression, and the input stores `name`, in the
command's one undo step.

- doc: the lexer skips a definition's `name =`, so until the design stores
  it the text evaluates as its expression and commands read and check it
  like any value. `Document::define_inline` then turns every stored
  definition (feature inputs and placements, dimension parameters, sketch
  pattern and text values, joint and coupling values, sheet metal and
  plastic rules, canvas planes) into a user parameter, the unit following
  how the input reads a bare number. A taken, reserved or empty name, two
  different values for one name, and a definition in a parameter's own
  expression or a configuration cell are refused; all or nothing.
- engine: `Session::execute` runs it after any command whose parameters
  hold definition-shaped text; the reply has `defined` (the first name,
  as `sketch.dimension` already gives) and `definitions`. A refusal fails
  the command, which leaves the design as it was.
- `parameters.change` with `new = expression` renames the parameter it
  changes (a dimension's or feature input's own, references following)
  and sets it; when the value is just `new`, it sets `new`. `changes`
  refuses definitions. `expr.evaluate` reports `defines`.
- UI: lengths keep the name when the design unit is applied; sketch text
  sends a definition as typed and previews only its value; the box corner
  and offset Distance 2 use the value; fields whose command keeps no
  expression (sketch scale, move, chamfer) refuse a definition with the
  way to name it. The dimension editor says which parameter it named.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 20:14:36 +00:00
02ac56d12f Feature windows choose Join, New Body or Cut from what the material touches (#6901) (#6903)
* claim: #6901

* Feature windows choose Join, New Body or Cut from what the material touches (#6901)

Extrude, Revolve, Loft, Sweep, Coil and the Box, Cylinder, Sphere and Torus choose
their operation by running the Join on a copy of the design off the window thread
and counting the pieces: Join when the material makes one body with what it
touches, New Body when it would be a separate piece, Cut when it lies inside a
body (Revolve and the four primitives; Extrude keeps its own Cut). The choice
changes only when a check is in, a pick in the Operation row (the shown option
included) stops it for good, and OK waits for a running check. Hidden bodies take
no part: with some hidden, the shown ones become the feature's targets.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation row: a pick in Extrude stops its own choice at once; ja/zh strings, gallery entry

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: contact test first, mesh volumes for Cut, OK takes the evaluated Join

Material touching no body is a New Body without running the Join (the contact
test costs 0-240 ms where the Join costs seconds on a large body). Inside is told
from display-mesh volumes instead of exact ones (8 s on a 400-hole plate). The
check evaluates the Join through Session::ahead, and OK of the same commands
takes it (Session::prime) rather than computing it again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preference: Choose the operation automatically (on by default)

Preferences > Design gets "Choose the operation automatically" (auto_operation,
on by default). Off, feature windows don't choose Join, New Body or Cut from
what their material touches: each keeps the operation it opens with (Extrude
its own Join or Cut), no check runs and OK doesn't wait for one, as before

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Arabic, Hebrew, Vietnamese and Turkish strings for the operation choice and its preference

Arabic, Hebrew and Vietnamese are complete catalogs now, and Turkish has a full
catalog, so this change's three strings get them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Operation check: a closed window's check stops; the icon audit doesn't choose

A window's operation check kept running after the window closed, a Join on
the design for nothing, and the test harness waited for it after every step:
the icon audit, which opens every window, took ~30 min instead of ~1. The
check now runs under a Progress, and closing the window (or one that doesn't
choose) abandons it: its evaluation stops at the next feature and nothing
waits for it. The icon audit turns auto_operation off, as it only looks at
icons (75 s again).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Box placement test: the window keeps its New Body

The test #6248 added places a box that overlaps Base and expects a second body;
with #6901 the window would join or cut it. The test is about where the box
goes, so it turns auto_operation off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Join pieces: read the target lists leniently after the rebase

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-28 19:57:27 +00:00
Logan NightandClaude Opus 5.5 bcdee6e0bb Sketch on a face: a round's edges that end a hair apart still close (#8284) (#8386)
* claim: #8284

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a face: a round's edges that end a hair apart still close (#8284)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a face: test both ends of a rounded loft end to end (#8284)

A square lofted to a circle with its side edges rounded, as in the
report: a sketch on either end face takes the whole face. Without the
fix the circular end fails with "face projection has a branched
boundary". Also drops a redundant term from the join tolerance.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-28 18:56:20 +00:00
CamWightandClaude Opus 5.5 14acdc2a6d Render: one sRGB transfer function (#7161) (#7162)
* Render: one sRGB transfer function, geom::srgb, for the hand-written copies (#7161)

Twelve places wrote the sRGB encode or decode formula out by hand (doc's glass
recipe, engine's render library, glTF import, the PNG film, photographic and
presentation output, the ray tracer's image, the stage, the surface decoder,
texture normalisation and the theme's contrast check). They now call
solidcraft_geom::srgb: encode/decode on 0..1 values, encode8/decode8 for 8-bit
codes. render::surface::srgb8_to_linear stays as a re-export, so its callers
are unchanged.

Same results: the module's tests compare it bit for bit with the formula as the
callers wrote it, over all 256 codes and a dense sweep of linear values plus
the knees, out-of-range values, infinities and NaN, for each way the callers
clamped (after encoding, before it, or not at all), and decoded values either
side of the decode knee, where no 8-bit code falls.

One change: glTF import encoded in f32. Over every f32 in 0..1, 218 of
1,065,353,217 values sit on a rounding tie that f32 got wrong and now give the
neighbouring code (f64 gives the nearer one).

Left as they are: render/job/image.rs (replaced by exact tables in its own
change), the tests and the starter-pack validator that keep their own copy as
an independent reference, and the WGSL shaders (they can't call Rust).

Fixes #7161

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: the sRGB codes of five callers that had no test of their output (#7161)

The glass swatch, a library surface applied as a plain appearance, glTF's
fallback for a colour channel that isn't a number, a stage panel and an empty
pixel in presentation output each get an assertion with their sRGB codes worked
out by hand. A planted wrong conversion at each is now caught by that test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 15:48:56 +00:00
semmelrindeandClaude Opus 5.5 be2deb8c6f Create Sketch: a face of a combined Mirror's copy keeps its own attachment (#5779) (#8278)
A mirror's or pattern's copy of a face carries its seed's construction certificate, and on a
combined body that certificate finds the seed's face. Capturing an attachment never checked
that the certificate finds the picked face, so a sketch on the mirrored half sat on the
original. The capture now falls back to the face's exact history name when the certificate
names another face, as docs/face-attachments.md describes.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 14:44:32 +00:00
PaddleStrokeandClaude Opus 5.5 cecb1d8b66 Naming: a long history of one body no longer overflows the stack on reorder (#7587) (#8159)
* claim: #7587

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Naming: name a long history of one body from the oldest up (#7587)

A body's face names are worked out from the names of the body it was made
from, recursively. After a few hundred features in a row whose names
nothing asked for, reordering or moving an earlier feature re-evaluated
them all and the first name lookup (a fillet at the end) recursed once per
feature, overflowing the 1 MB window-thread stack on Windows. Name every
16th earlier version oldest first so no lookup recurses through more than
16 of them; the names are the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 14:43:42 +00:00
9bcb2ffe68 Drawings: first landing from the drawings branch (#8249)
* Drawing sheets: sizes, the ISO 5457 border and its marks (#3875) (#5108)

* Drawing sheets: sizes and the ISO 5457 border (#3875)

A sheet is a paper size and an orientation: ISO A0 to A5, Letter, Legal,
ANSI A to F, architectural A to E1, or a custom size (finite, above 0 and
at most 5,000 mm a side), landscape by default and either way for every
size.

A border profile is the rule for its border, and layout() works it out
for a sheet: the frame inside the margins, and the reference fields with
their labels. The ISO profile has a 20 mm filing margin on the left and
10 mm elsewhere, a 0.7 mm frame, fields of 50 mm out from the centre
lines with the corner fields taking what's left, rows lettered from the
top without I and O (AA, AB and on past Z), columns numbered from the
left, and an A4 sheet labelled on its top and right only. A profile can
divide the frame equally instead, or have no grid.

The records sit in geom, next to the section records, so saving,
rendering and export can all use them. Nothing is saved or drawn yet:
there is no command and no format change. Margins that leave no drawing
space, values that aren't finite, fields outside 1 to 1000 mm, more than
200 equal fields and unknown JSON fields are refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: ISO 5457's centring and trimming marks (#3875)

A drawing border profile now also holds the grid reference border and the
centring and trimming marks, either of which can be left out. The ISO
profile follows ISO 5457:1999 (read in its identical adoption,
IS 10711:2001):
- the grid reference border 5 mm outside the drawing border on every
  side, with the field labels between the two;
- four centring marks on the sheet's centre lines, from the grid
  reference border to 10 mm inside the drawing border;
- at each corner a trimming mark of two overlapping 10 x 5 mm
  rectangles, in the margin outside the grid reference border.

The labelled sides are now a rule worked out for each sheet: ISO 5457's
(the top and right of A4, all four sides of the others) or fixed sides.
So one profile labels every size correctly. validate() checks what
doesn't depend on the sheet, for when a profile is read; layout() calls
it, then checks the rest against the sheet.

Refused:
- a grid reference border that isn't finite, is negative or is wider
  than a margin;
- a centring mark that isn't above 0, would reach past the sheet's
  centre lines, or is on a drawing border those lines miss;
- a trimming mark that isn't above 0, is wider than it is long, is
  wider than the margin left outside the grid reference border, or is
  longer than half the sheet's shorter side.

The grid rule's JSON is now externally tagged ("none",
{"from_centre": {"field_mm": 50}}), as the sheet size is, so an unknown
field is refused in every form; the internally tagged "none" ignored
one. Nothing is saved yet, so the shape change costs nothing.

The names follow the glossary, and ISO 5457's "drawing sheets": the
module is drawing_sheet (was sheet, which means sheet metal elsewhere
here), DrawingBorderProfile and SheetLayout (were BorderProfile and
BorderLayout), sheet_border and drawing_border (were paper and frame),
and Sheet::size_mm (was paper_mm). The first part of S1 is still a draft,
so the renames are made here rather than in a commit of their own.

The extra centring marks ISO 5457 asks for on sheets larger than A0
aren't here yet. Still nothing is saved or drawn.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: a lighter built-in border, the filing margin a choice (#3875)

Cameron's decisions after seeing the sheet in the app, 2026-10-23:
- No trimming marks in the built-in profile: the filled corner blocks
  take a lot of ink. trimming_mark_mm stays, so a profile can still ask
  for them.
- Centring marks stop at the drawing border: from the grid reference
  border to the drawing border, never into the drawing area (on A4 they
  crossed the tables). centring_mark_mm keeps its meaning, how far a
  mark reaches inside the drawing border, and now takes 0, the built-in
  value, as grid_border_mm already takes 0 for "on the drawing border".
  A mark of no length (a reach of 0 with no grid reference border) is
  refused.
- Margins of 10 mm all round. ISO 5457's 20 mm filing margin on the
  left, for drawings that get bound, is a named choice: filing_margin,
  off when not given. On, it stands in for margins.left_mm, which is
  kept, and still checked, for when it's off again. The 20 mm is
  FILING_MARGIN_MM, and validate() and layout() both take the margins
  from one helper, laid_out_margins().

A3 landscape is now 400 x 277 at (10, 10), with eight 50 mm columns.
With the filing margin it is 390 x 277 at (20, 10) again, the same as a
20 mm left margin set by hand. A profile with all three choices on
(ISO 5457's full border) lays out exactly as the built-in profile did
before, and the tests keep the old hand values for it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W23a workshop plate oracle fixtures (#4950) (#4962)

* test(oracle): reviewer-aligned parameterized workshop plate fixtures (#4950)

Independent analytic W23 expected values and seven verified models,
including four R10 corners and the 2 mm tangent top chamfer.
Document accepted Drawing states and commit regenerated docs/oracle.md
from successful workflow run #29 (90/90 pass).

* fix(oracle): correct W23 chamfer centroid and clarify drawing session ownership

* Paper scene: plain records of what is drawn on a sheet (#4890 A1) (#5513)

geom::paper holds what a sheet shows as plain data: groups of strokes and fills, each group tagged
with the object that drew it (an opaque id) and its kind, with one validation pass over a bounded
record count. Seg2's checks and the coordinate rule move into profile.rs so section and paper share
them, and drawing_sheet takes its side and line limits from paper, so each limit is written once.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: centring marks across the whole margin (#3875) (#5554)

The built-in sheet's centring marks now run from the trimmed sheet's edge to the drawing border.
From the grid reference border, as before, a mark was the same length as a grid field mark, and on
A3 it sat on one (the sheet's centre falls on a field edge), so it no longer read as a mark once the
grid reference border's outline is left out (Cameron, after the prototype on #3875).

- DrawingBorderProfile.centring_mark_start: sheet_edge (the built-in's, and when not given) or
  grid_border (ISO 5457's figure 5); ISO's full border in the tests asks for grid_border.
- A mark still needs a length: one that stops on the drawing border needs room outside it on the
  side it starts from, every margin for sheet_edge, the grid reference border for grid_border.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: no centring or trimming mark longer than the largest sheet's side (#3875) (#6410)

A border profile capped every length at 5000 mm (the largest sheet's side) but two: a
centring mark's reach inside the drawing border and a trimming mark's length. A file could
give either a huge whole number, such as 18446744073709551615. The read's number check passes
whole numbers, so the profile took it as 1.8e19 mm, and saving wrote it as a decimal the next
read refused: a drawing that saved but didn't open again. K2's fuzz test of drawing files
(#3890) found it.

Both now take the cap the margins have, `MAX_SIDE_MM`, in `validate`, so the file is refused
when it's read. Layout's own checks against the sheet are unchanged, so a 5000 mm mark still
validates and is refused only on a sheet too small for it.

Tests: the hostile-profile test refuses 5000.000001 mm and 1.8e19 mm for each mark, and takes
5000 mm on its own; 4 planted faults (each cap removed or made one short) are all caught.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials types: phantom, reference, purchased and inseparable (#3874) (#5107)

* Bill of materials types: phantom, reference, purchased and inseparable (#3874)

A component's bill of materials type is a part property (`bom_type` in its metadata, set with
component.metadata.set and read by component.metadata, as part_number is), so older releases
keep it and no format change is needed. It isn't a design property: the Design Properties
dialog doesn't list it and document.metadata.set refuses it. A word this build doesn't know
reads as normal and is kept.

assembly.bom counts by type: a phantom has no row and what it holds counts where it is placed,
in the same rows as the same parts there; a reference counts nowhere, and nothing inside it
does; purchased and inseparable components are one row, and in parts only an inseparable
component's purchased parts are listed too. Rows of one part number but different types are
different rows. Rows and children carry bom_type. With no types set the rows are as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: bill of materials and bill of materials type (#3874)

The bill of materials types are a new idea, so the glossary gets their
term, with the five types, and "normal" gets its fourth meaning in the
table of words with more than one meaning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials types: a plain line for each (#3874)

The guide's table and the glossary entry say what each type is for in
plain words: something you make, something just to group, something to
use as a reference, something you buy, something made as one piece.
The names stay the five standard ones.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: kits fold together only when their contents' types match (#3874)

With group_children, two kits with one part number share a row when what they hold reads the
same. That reading (kit_key) compared each child by part number and count, but not by its bill
of materials type, though rows themselves are told apart by type. So a kit holding a made bolt
and a kit holding a bought one, both KIT, folded into one KIT x2 row listing the first kit's
bolt twice: the other type was lost, and which one depended on creation order. 0xlillith found
it in review of #5107.

kit_key now includes each child's type. Equal part number, type and contents still fold.

Test: two KIT kits each holding a BOLT fold into one row of two; once one bolt is purchased they
are two rows, each listing its own bolt. Planted fault (the type left out of the key): caught.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing files: a drawing saved as a container or as plain JSON, never read as a design (#3890) (#7098)

* File format families: drawings share the design format's versioning (#3890)

The format code works for a family of files: its own tag, its own numbers and
its own folder of change files, with one reading of a file's format, one
refusal of a file a newer build saved and one upgrade for every family. Designs
(solidcraft/N) are one family and keep everything they had: FORMAT and FORMATS
are as they were, and pending_names, format_string, version_of and read mean
what they did. Drawings (solidcraft-drawing/N) are the other, with format 1 as
their first record and each later change one file in
crates/doc/src/drawing/format/pending/, as design changes are. Nothing saved
changes.

A design tag never reads as a drawing's or the other way round, and a file that
names no format is a design from before format strings, never a drawing. Every
refusal names its family; a design's read word for word as before. A design
listing a pending change this build doesn't have is now refused as a newer
build's before its content is checked, as a newer number already was, so a
newer build's fields never read as damage. The list reader is
take_names(v, key, noun), the shape #4811 uses for its own list.

For the maintainer, the release step changes: scripts/fold-format-pending.sh
now folds every family that crates/doc/build.rs lists (FAMILIES), each into
its own next number: designs into crates/doc/src/format/v<N>/ as before,
drawings into crates/doc/src/drawing/format/v<N>/ from 2. With nothing pending
in a family it says so and moves nothing. Its test folds a drawing change into
v2 beside the design changes. docs/releasing.md, CONTRIBUTING.md and AGENTS.md say so.

build.rs lists each family's changes from its own folder, each folder's
versions contiguous from its own base.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing record: format 1 of the drawing family (#3890)

A drawing is now a record of its own (crates/doc/src/drawing.rs): its name,
the designs it draws (sources: an id and the design file's path, relative to
the drawing's folder as a linked design's is), its properties under the design
metadata's rules, its units (each design's own, or one length unit of the
expression unit table), its content language (a BCP 47 tag) and its sheets.
A sheet holds its paper, a copy of its drawing border's profile, the
resolution its pictures are rendered at (300 dpi unless it says, 25 to 2400),
the component it documents and whether it is left out of the sheet count or
of printing. This is format 1 of the drawing family; each later kind of
record adds one file in crates/doc/src/drawing/format/pending/.

The rules: one id counter for every object, raised above the largest id when
a file is read and never rewound; every reference is an id that must resolve,
or the file is damaged and refused, never patched; 1 to 1,000 sheets, at most
64 sources, names of 1 to 256 bytes, paths of 1 to 4,096 bytes without NUL.
The same drawing always saves as the same bytes.

Drawing::from_json reads at most 16 MiB of text, then runs the family's format
check, the number check, the upgrade, the typed record (unknown fields refused
everywhere) and Drawing::validate. The number check is now one function every
family calls, Family::check_numbers, told which field holds other tools' data;
a design's refusals read as before.

Nothing saves or opens a drawing yet: the container is the next step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing ids: random and collision-free from format 1 (#3890)

A drawing's objects now take random ids, the form jyviko chose on #3890 from
#1017: no counter, so objects added on two branches never share an id and
never edit one line. The allocator is one module for drawings now and designs
later (#626 Phase 3), crates/doc/src/ids.rs: an IdSource gives nonzero u64s by
splitmix64 from a seed, each checked against the ids in use and drawn again
when it is one, or when it is 0. A run never draws a number twice, so at most
one draw per id in use comes before a free one, and a seeded run over a file
the same seed made still gets a new id. IdSource::seeded gives the same ids
for tests and replays; IdSource::from_entropy seeds a session from the
standard library's hash keys, the time and a count, with no new dependency.

In a file an id is 13 characters of Crockford base32, lowercase
(0000000000001 to fzzzzzzzzzzzz): ids::encode writes it and ids::decode reads
only that spelling, case-sensitive, so an id has one form to search for.
Anything else, 0 included, makes the drawing damaged. The drawing loses
next_id (a file that holds one is refused), and Drawing::new and allocate_id
take the IdSource. Messages name ids as the file writes them. The component a
sheet documents stays its design's own number until designs move over.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing record: a drawing too large to reopen isn't saved (#3890)

from_json reads at most MAX_DRAWING_BYTES (16 MiB), but to_json had no limit. Other tools'
properties are kept as they came, and indenting them can grow a drawing read in at about 4 MB
past 16 MiB (two million zeros in one array), so the next read refused what the save had just
written. 0xlillith found it in review of #3891.

to_json now returns a Result and refuses JSON longer than a read takes ("drawing too large to
save (at most 16 MiB)"), so every drawing saved opens again. Nothing writes drawing files yet, so
the error reaches the future file writer before it publishes anything.

Test: that case is refused, and a smaller compact drawing saves and reopens unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing files: a drawing saved as a container or as plain JSON, never read as a design (#3890)

K3 of the drawing storage plan (W11.2): the file a drawing is saved in. Nothing writes one from a
command yet; opening and saving come with K5.

- A drawing container is a design container holding `drawing.json` (Deflate, as `document.json`)
  in place of `document.json`, and `container.json` says so:
  {"content": "drawing", "format": "solidcraft-container/1"}. A design's `container.json` is as it
  was, with no `content`. The plain JSON form is the drawing's own text. Both give the same bytes
  every save, so a drawing can live in version control as text.
- `io::file_kind` tells a design from a drawing by `container.json` or by the JSON's format. The
  design reader refuses a drawing ("this file is a SolidCraft drawing, not a design: open it as a
  drawing") and the drawing reader a design; plain JSON only asks when it isn't a design, so
  reading a design costs nothing more. A container's content this build doesn't know, or a drawing
  container that also holds a design's `document.json`, is refused.
- `read_drawing` (bytes, either form), `read_drawing_file` (one seekable handle, the design
  reader's checks) and `write_drawing_container`; `DRAWING_EXT` (`scdwg`) and
  `is_drawing_path` beside the design's.
- The container writer's set-up and finish, the file opening and the container sniffing move into
  one function each, which designs and drawings both use. The container's own checks (budgets,
  entries, the ZIP directory) are the design container's, word for word.

Tests: a drawing round-trips through both forms byte for byte, and the container holds exactly
`container.json` and `drawing.json`; `file_kind` on both forms of both kinds; each reader refuses
the other's file; unknown content, a stray `document.json`, a missing drawing, an unknown
container version and a damaged drawing refused; both forms from disk, and a directory refused;
mutation fuzz of both forms (an error or a drawing, never a panic).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Paper scene: SVG of a sheet, its lines, arcs, cubics and fills (#4890 A3a) (#7032)

The first export of a paper scene, as SVG first (jyviko and 0xlillith on #4890), from the research
in the plan's §16. A3b adds ellipses, hyperbolas and Béziers above degree 3, which this refuses as
"not supported yet".

- `geom::paper::Prepared`: writers read a scene through `Scene::prepare`, which checks it first, so
  none reads one unchecked. Clipping goes there too, once (A8).
- `geom::paper::arc_pieces`: an arc's ends in pieces of at most a quarter turn, the last its own end.
  A half turn drawn from its ends is ill-conditioned: rounded to the nanometre (six decimals of a millimetre) its
  centre moves up to 1e-2 mm, where a quarter turn's stays under 1e-6 mm.
- `io::paper::paper_svg`: one user unit a millimetre, the size in mm on the root; y flipped by
  writing the height less y, so the file's numbers are page coordinates and an anticlockwise arc
  has sweep flag 0; lines `L`, arcs `A` (never large-arc), cubics `C`, parabolas `Q`; fills
  black and even-odd; one path per item; groups as `data-object` and `data-kind` (object ids can't
  be XML ids). No background, so cutters see only the marks.
- Numbers are whole nanometres (six decimals of a millimetre): no exponent, no "-0", the same bytes every time. They are the
  writer's own state too, so a joint is written once and a closed path ends exactly on its first
  point. Numbers are written straight onto the document, with no text made per number. A width
  under half a nanometre is written as one, and a piece too short for the grid is merged into the
  next, both counted in the report; a path's last piece has no next, so it is kept however short
  (unless it has no length). Output over 64 MiB is refused.

Tests: the A3 drawing border's whole document; quarter, 270°, clockwise and whole-turn arcs, and a
circle of two halves giving the same four quarters; the quarter-turn boundary both sides; cubics and
parabolas, and the conics refused; the number format; a closed path whose start and end round
apart; a sliver merged; an open path's short last line and arc kept, and one of no length dropped; read back through our own SVG reader (lines exactly, the arc as an arc);
the scene's JSON mutated into the writer (never a panic).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W17a: view definitions as data (#4816) (#4817)

* claim: #4816

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing views as data: named views, scales and the map onto paper (#4816, W17a P1)

What a drawing view is, before anything draws it (geom::drawing_view):
- NamedView: the six principal views and the isometric views from the four upper corners, each
  an exact basis (a Plane whose normal points back at the viewer), never taken from a camera,
  whose pitch clamp would tilt a top view, with no -0 to write out; `iso` reads as the
  front-right one.
- basis_looking: any other view from its direction, an up and an origin (paper x = direction x up,
  paper y = x x direction), refusing a zero direction, an up along it, or an origin that isn't
  finite or within 1e12 mm. W07's
  {direction, up, origin} view reads through it.
- Scale: paper : model as two positive numbers, read and written as "1:2", from 1:100000 to
  1000:1; Scale::fit picks the largest ISO 5455 preset (50:1 to 1:10000) at which a view fits a
  space (W07's "fits the page" default), compared as size x paper <= room x model so an exact
  fit at a reduction isn't lost to rounding.
- ViewFrame: a view's basis, scale and place on paper, the point of its plane at `centre`
  landing at `position_mm`. Its paper map moves the view's curves and their accuracy onto
  paper (paper error = scale x model error); `boundary` maps a box of its plane onto paper from
  its four corners.

In geom, where Seg2 lives:
- Similarity2 and Seg2::similar (new): scale, turn and shift a segment exactly, an arc staying an
  arc. Similarity2::new refuses a scale that isn't above 0 and works the turn out once, not per
  point;
- Seg2::map_controls: a segment's control points mapped by any function. It was doc's
  sheet::map_controls; its four callers in doc use the method now, unchanged.

CurveAccuracy::scaled gives a curve's accuracy at another scale.

Tests: each named view's basis and viewer side, and the same bases from a direction and up; a 50 mm cube in every principal view at 1:1 and
1:2, and in isometric (edges 50 x sqrt(2/3), outline 50 x sqrt(2)); the view's centre on its
position (W07's 100 x 20 front view on A3 at 2:1); scales read, written and refused; the fitted
scale, an exact fit at 1:5 and ISO's smallest; no -0 in any named view's axes; an origin refused by
its own message; hostile bases, centres and positions; every segment kind moved by a similarity,
and the similarities refused; scaled accuracy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing views: the bottom view pinned, square near parallel, bounded scales and boxes (#4816)

From DevonHope's review of #4817:
- The tests pin all six principal views exactly. The direction-and-up test uses literal ups,
  so a bottom view turned half round now fails it.
- basis_looking squares x to the direction before normalising. Near the 1e-9 threshold the
  normal was up to 8.8e-9 rad off; now it is about 1e-16.
- Scale::fit fits nothing for a size or room that is negative or not finite. A size of 0 still
  sets no limit that way.
- Each side of a scale is 1e-6 to 1e6, so a scale writes at most 49 characters.
- ViewFrame::boundary returns a Result. It refuses a box that is inside out or not finite on
  paper, instead of dropping a corner.
- paper_map, boundary and seg_to_paper say which coordinates they take.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W18 S2: title blocks as data (#3875) (#3877)

* Title blocks: what a cell shows and where its text goes (#3875)

geom::cell holds a title-block cell's content: parts of text and fields
(component, drawing, sheet, revision or prompt, by key, with an optional
unit and decimals kept as written for the resolver to check), at most 64
parts and 4096 bytes of text, with no control character but a line break.
Beside it are a resolved value (live, overridden and drifted, or missing,
with "-" for each part that couldn't be read and why), an override with
the value it replaced, and the projection a drawing's views use (first or
third angle), which the title block's symbol will read.

A fit warns and never cuts: a count of characters, not bytes, with its own
count for text in Chinese, Japanese, Korean or Yi characters.

The cell text rule places a label and a value: the label's baseline 1 mm
plus its cap height below the cell's top, the value box under it inset by
1 mm, one line centred in the box, and wrapped or several lines down from
its top at the font's pitch, with a warning when the last falls below the
box. Wrapping by width, width warnings and glyphs a font lacks need the
text measured, so they wait for the paper scene's text.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Title blocks: definitions and their place on a sheet (#3875)

geom::title_block holds a title block's definition: its size (1 to 1000
mm a side), its outline and cell line widths, and up to 64 cells. Each cell
has a snake-case name of its own, a rectangle measured from the block's
lower-right corner, an optional one-line label with its cap height, and a
value: text from cell content, with its cap height, alignment and fit, or
the projection symbol, which reads the drawing's projection and is never
fixed in the block.

validate() checks a definition on its own, as when one is read: cells
inside the block and not overlapping (touching is fine), label and value
cap heights that fit, and the content's own limits. layout() puts the
block on the drawing border's lower-right corner of a sheet, refusing one
that doesn't fit, and gives each cell's rectangle, its label's place and
its value box by the cell text rule. On A3 landscape a 180 x 54 mm block
runs from (230, 10) to (410, 64); it fits A5 landscape and every larger
sheet, but not A5 upright.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cell text: a value box lies within the paper's coordinates (#3875)

place_lines took any finite, ordered value box, but centring one far out (min x 1e308, max x
1.1e308) overflows: the anchor came back infinite, with no warning. 0xlillith found it in review
of #3877.

The paper scene already bounds every coordinate it holds by MAX_COORDINATE_MM (twenty times
the longest sheet side). That limit is now public, and place_lines keeps its box inside it, so
its anchor is always finite: one rule for what a paper coordinate may be.

Tests: the hostile-box test refuses both overflow cases from the review and a box just past the
limit on each side, and places lines in a box the size of the whole paper limit. The fuzz test's
numbers now include values past the limit (1.1e5, ±1e308).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Title blocks: padding from the lines' inner edges, one label rule, nothing unread (#3875)

A cell's text is padded from the inner edge of its lines: each side of a cell moves in by half
the line drawn on it (the outline's on the block's edges, a cell line's inside), so a wide
outline never covers the text. Before, the padding ran from the line's centre.

The label's one-line rule lives with the cell text rules (`cell::check_label`), where parts
lists will find it. The cell types nothing read yet (`Override`, `Resolved`, `State`,
`Problem`, `Reason` and `MISSING`) wait for the resolver that will read them.

The tests check the exact thresholds inside the lines (a label that leaves no room, a value
that just fits), pick each of the lines, alignment and wrapping on their own so every
combination comes up, and lay fuzzed blocks out on every standard sheet, either way, with and
without the filing margin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Title blocks: the drawing border's line, descenders, room where the block sits (#3875)

From DevonHope's review of #3877:
- Each cell's lines are clamped to the inner edge of the drawing border's line. That line runs
  along the block's right and bottom edges, and along any other edge it reaches, as when the
  block fills the border. Aabb2::intersection, the 2D twin of Aabb3's, does the clamping.
- layout checks each cell's room again where the block sits (place_cells, which validate runs
  at the origin), so rounding at the real corner can't turn a cell inside out.
- The cell text rule counts descenders, at 3/10 of the cap height (ISO 3098's lettering B).
  They may reach into the padding under a value box, never past it to a line. place_lines
  warns Height when they would, and validate asks it whether one line fits.
- The module doc no longer links to a private function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455) (#2457)

* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455)

crates/geom/src/hlr (L0): prepare once per body, then hidden_lines for a
scene of placed bodies. Edges and face silhouettes are projected from their
exact curves, split where projections cross, and each piece is classified by
rays toward the viewer against the trimmed faces: visible, hidden or
explicitly uncertain, never guessed. Planes, cylinders, cones, spheres and
tori are supported whether stored as analytic records, revolutions or spline
patches; freeform faces are reported and make what they could hide
uncertain. Screen geometry is Seg2 with the W01a accuracy vocabulary: exact
lines and conic arcs where the projection is exact, bounded chords
otherwise. docs/drawing-hlr.md holds the contract and its limits.

* geom/hlr: handle the brep records main gained in #3093

Main's exact model storage (#3093) added Curve::SurfaceIntersection,
Surface::PlaneThrough and Surface::PlacedRevolution, and the HLR matches on
the records no longer compiled. A plane through three points is a plane: it
is trimmed and intersected as one, and a box stored that way draws the same
bits as one with axis-stored planes. The procedural intersection curve and
the placed revolution (whose affine placement may scale it unevenly) are
refused by prepare as not supported yet, until the kernel adapter handles
them. The records' positions move with the body's centre like the others.

* geom/hlr: pad plane faces' boxes, so a plane record off by rounding still hides

Plane faces took the box of their boundary chords unpadded, flat along the
normal. When the plane record and its edges disagree by rounding (a unit cube's
top plane one ulp above its edges, a 100 mm cube's 1e-11), the ray toward the
viewer reached the plane just outside that box, the slab test culled the hit,
and the back edges came out Visible with no doubt. Every face's box is now
padded by 1e-6 of its size, as curved faces' boxes already were. Reported by
DevonHope on #2457.

* geom/hlr: limits from review: trim samples, scene extent, crossing pairs, surface groups

From DevonHope's review of #2457:
- Options::trim_samples must be 1 to MAX_TRIM_SAMPLES (4096).
- Placed bodies must stay within MAX_COORDINATE (1e12 mm, as section and brep
  bound stored numbers). Placements 1e200 apart made the scene's size infinite
  and every tolerance taken from it with it, so everything came out Visible.
- The crossing search counts its candidate pairs before it starts and meets
  each pair only in the first grid cell the two segments share, instead of
  keeping a set of the pairs met, which could outgrow wasm's 4 GB before the
  500 million pair budget tripped. The same pairs in the same order.
- prepare groups faces on one quadric or torus by comparing each face with
  the faces of its kind whose size agrees to the tolerance (sorted), not with
  every face; at most 50 million comparisons. prepare_cancellable polls a
  cancel callback between edges, faces and comparisons.

* geom/hlr: boundary chords on a grid, and no fine pass over coincident curved chords

The cost items of DevonHope's review of #2457:
- Every ray hit asked how far it lies from its face's boundary by scanning all
  of the face's chords (4096 per circle; a plate's face with 256 holes has
  about a million). The chords are now bucketed on a uniform grid over the
  boundary's box, cells at least as long as the longest chord, and the test
  looks only at the cells around the point. It finds exactly the chords the
  scan finds.
- Chords of two curved curves that lie on each other end to end (aligned holes
  seen along their axes) were cut into 16 by 16 pieces and intersected, to
  find crossings that are only noise within the curves' tolerance. They are
  now skipped; visibility changes where a coincident run starts or ends, and
  chords that only partly overlap still find those.
- Fixtures: a plate with holes, coaxial cylinders seen along their axis, and
  300 placements.

* geom/hlr: pad boxes by the body's coordinates too; coincident chords only to rounding

Review of the previous commits found two holes:
- The padding grew with the face's size, but rounding grows with where the body
  was modelled: a 0.001 mm cube 1e7 mm out, its top plane one step (1.9e-9 mm)
  above its edges, still had its hit culled. The pad now adds 1e-12 of the
  body's offset.
- Two chords were taken for coincident when their ends lay within each other's
  sag, which in a coarse scene can hide real crossings: an arc can bulge across
  a line 1 mm off its chord twice. Only chords that coincide to rounding are
  skipped now; identical projections, the costly case, still are.

* geom/hlr: coincident curves meeting at shared sample points do not cross

Timing the review's scenes showed that skipping coincident chords was not
enough: chords of two coincident curves also touch end to end at every sample
point they share, and each touch was a crossing to refine and split at. 64
coaxial cylinders seen along their axis gave 8.3 million crossings (19 s), 64
cylinders one behind another along the line of sight 4.2 million (214 s;
before these commits the crossing budget refused it). A touch at a shared
sample point is now dropped when the two curves also coincide, to rounding, on
both sides of it. Where a coincident run starts or ends one side differs, and
the touch is kept.

* geom/hlr: the own-face margin allows for rounding where a body was modelled

The far 0.001 mm cube of the previous commit showed a second effect of records
rounded at large coordinates: its top plane, one ulp (1.9e-9 mm) above its
edges, hid the top edges themselves, because a ray leaving an edge met its own
face 3.2e-9 mm along, past the own-face margin of 1e-6 of the face (1.4e-9).
The margin now also covers 1e-14 of the body's offset (about 45 ulps of its
coordinates), which only matters for parts far smaller than their distance
from the origin.

* geom/hlr: no parity test for a hit on the boundary, where it is uncertain anyway

* docs/drawing-hlr: the fixtures of the review's second round

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>

---------

Co-authored-by: CamWight <91156642+CamWight@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Benny1496 <163034806+Benny1496@users.noreply.github.com>
Co-authored-by: Mateusz Sych <151755914+SychPL@users.noreply.github.com>
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-28 13:31:16 +00:00
Nathan Dane b86c75544e Appearance: read the look chain and replace a look everywhere in one undo step (#6428) 2026-10-28 12:10:31 +00:00
Nathan Dane 0b2efd60b9 Render browser: scene tree with Environment, Lights, Shots and Objects rows, resolved appearances and a Browser selection (#6427) 2026-10-28 09:58:57 +00:00
54f613e4dd Preserve linked component materials and appearances (#7609) (#7616)
* Fix linked component materials and appearances (#7609)

* Linked components: the cached link read carries the source properties

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Update Links: a link without recorded inherited properties is read again

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preserve authored linked-face overrides and apply cached source properties

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 09:33:49 +00:00
P'tite TêteandP'tite Tête 9fb41f8378 feat: Start a new selection's preview without waiting for the obsolete one (#7167) (#7261)
- Leave the running preview behind when the selection moves to another setup, asked to stop
- Keep at most two obsolete previews running; streaming, tools and other inputs wait as before
- Keep no result of a cancelled watched evaluation in the shared evaluation cache
- Test the detaching, the cancel reaching the spawned job, and the cache guard

Co-authored-by: P'tite Tête <asso@ptitetete.com>
2026-10-28 01:32:17 +00:00
bherbruckandClaude Opus 5.5 2cdfe050db Extrude to Object: a Join leaves the body it runs to alone when that body is in another component (#7975)
#6471 joined the body a To Object extent runs to into the tool, whatever its component.
A connector's boss extruded up to an enclosure's face (each in its own component) merged the
enclosure into the connector, and features referencing the swallowed body failed after it.
The body it runs to now joins only when it is in the feature's own component, or when the
feature names it as a target.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 20:48:28 -04:00
bherbruckandClaude Opus 5.5 03d0342469 Release 0.25.0: version bump, design format 41 (#7916)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 18:05:36 -04:00
FrankandCopilot 7fad8dbec0 Fix feature creation at timeline end (#7620)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
2026-10-27 21:17:39 +00:00
semmelrindeandClaude Opus 5.5 ca75f86947 Sketch: deleting a dimension in a rolled-back history no longer rebuilds the features after the marker (#7253) (#7425)
* claim: #7253

* Sketch: deleting a dimension in a rolled-back history no longer rebuilds the features after the marker (#7253)

The check before a delete evaluated the whole history twice when the
timeline was rolled back. Removing a sketch constraint changes the later
features' cache keys, so on a long history Delete on a dimension took
minutes. When the design differs only in sketch constraints (and model
parameters nothing uses any more) and each changed sketch solves to the
same geometry, profiles and ends, the features after the marker see the
same inputs: compare the live models only. Anything else still gets the
full check, so the report is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 20:53:34 +00:00
Sebastian HöpflandClaude Opus 5.5 d1398e2c52 Evaluation: keep a sketch's frame bodies across evaluations that move nothing (#7814)
A sketch on a face of a placed component is evaluated in that component's frame, so the
evaluator moves (and meshes) the bodies placed differently into it. FrameBodies keeps those
moved bodies, but every evaluate started a new generation and dropped what neither it nor the
evaluation before it used. Evaluations that reuse every result never touch the cache, so two
of them in a row emptied it: Delete refreshes the model three times (selection.delete's nested
refresh, its own, then execute's), and the confirmation's dry run more, and an undo answered
from the cache is another. The next edit of the sketch then moved and meshed every placed body
again: in a design of ~3,500 imported bodies each sketch edit after a Delete took 46 s, 34-43 s
of it tessellation.

The generation now starts on the evaluation's first use of the cache, so an evaluation that
moves nothing leaves it alone. It still holds at most two generations of moved bodies.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 19:43:12 +00:00
98abb249c4 Cylinder: place by distances from reference edges, like Hole (#6380) (#6381)
* claim: #6380

* Cylinder: place by distances from reference edges, like Hole (#6380)

A Cylinder standing on a flat face can take up to two straight edges of
that face as references, each with the distance of its base centre from
the edge's line, measured in the face's plane, as a Single hole does
(#37). `solid.cylinder` takes them as `references: [{edge, distance}]`
with a numeric `base`; the edges are found again by their persistent
names, else their points, so the cylinder follows them when the part
changes, and each distance is a parameter (an input of Inspect Feature).
A cylinder without references stays at its base, as before.

In the Cylinder window, started on a picked face, Reference 1 and 2 take
the edges, each with its Distance measured from the pick, so it works
with the mouse alone; the canvas shows each distance with a box to type
it in, and Edit Feature picks the edges again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: Edit Feature shows each reference edge input once (#6380)

A face selected when Edit Feature opened the window had already added
the reference inputs; the edit added them a second time.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder references: the measured-once cost test's cylinder has none (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: pick the face it stands on in its window, then the edges (#6380)

The Cylinder window took its place only from a face selected before it
opened, so started first it stood at the origin and offered no reference
edges. It now has a Face input before Reference 1 and 2, as the Hole
window does: start Cylinder, click the face, click the edges, OK.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Glossary: reference edge, and "Reference" among the words with more than one meaning (#6380)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder edge references: the Cone dialog (#6250) gets the references field too

The Cone primitive landed on main after this branch began; its dialog initialisers lacked
the `refs` field the Primitive kind gained here. The dense form check for Cylinder fills only
its fields: its face and reference edges place it, which the reference tests cover.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cylinder: declare references in its contract; reference-placed cylinders are not placement-independent

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 19:28:22 +00:00
raykholo 38820658fa Body appearance replaces imported STEP face colours (#5769) (#5775)
* claim: #5769

* Let body appearances replace imported STEP face colours (#5769)

A body appearance assigned in the design now replaces the face colours the
body was imported with; face appearances set in the design still win over it.
2026-10-27 19:03:10 +00:00
semmelrindeandClaude Opus 5.5 d14dbe5e39 Move: a copying Move can be edited from the History (#7741) (#7761)
* claim: #7741

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move: a copying Move can be edited from the History (#7741)

Editing a feature runs its command on a scratch session with the marker
right after it. For the last feature that marker sits at the end of the
timeline, and place_feature pushed the new feature after it, rolled back,
so a copying Move found no copies and refused the edit. A marker right
after the last feature now moves on past a feature added there.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 18:47:01 +00:00
semmelrindeandClaude Opus 5.5 98658142c0 Delete: deleting one instance of a component takes its joints with it (#7749) (#7782)
* claim: #7749

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Delete: deleting one instance of a component takes its joints with it (#7749)

Deleting an occurrence while its component had other instances dropped
only the occurrence: the joints on it, their motion links, joint origins,
contact set places and exploded moves stayed, so a joint stayed in the
Browser naming an occurrence that was gone. The clean-up that
remove_component_tree did is now Document::remove_occurrences, used by
both.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 18:44:44 +00:00
takuto-NAandClaude Opus 5.5 d245541075 Reuse placement-independent model results (#6525) (#6527)
* claim: #6525

* perf(eval): reuse local geometry across placement changes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(engine): preserve recovery journal through shared refresh

The shared evaluator retains the document Arc, so refresh and body-name
pinning can copy it after command_done recorded its address. The next read
then mistakes that copy for an outside edit and discards the replay.

Record completion after refresh, name pinning or failed-command restoration.
Add a minimal journaled box/inspect regression in the existing crash suite.

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 16:51:09 +00:00