Commit Graph
770 Commits
Author SHA1 Message Date
Dahak BuildsandDahak Builds 070b1414ee Fix manual vertical/horizontal constraints with circle centre (#617) (#6928)
* claim: #617

* fix(sketch): manual Horizontal/Vertical between a circle centre and an edge (#617)

The manual H/V tool silently did nothing when a point and a straight line
were picked or selected together (only two points or a lone line worked),
while auto-constrain inference applied the alignment. A point picked or
selected with a straight line now aligns the point with the line's
midpoint, in the mode the line's dominant axis suggests, through the
existing midpoint alignment in sketch.constraint.horizontal_vertical.

- tools: constraint_preselection consumes [point, line] selections; the
  interactive tool applies the alignment on the second pick (a line).
- context menu: Horizontal/Vertical Constraint items for point + line.
- engine + ui regression tests pin centre-edge alignment and the
  edge-to-centre dimension from #617.

Written by Qwen.

* style: formatting cleanup for #617 files

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:09:52 +00:00
111c662fe4 Extend: join a stop that is already another curve's end (#6863) (#6865)
* Extend: join a stop that is already another curve's end

sketch.extend refused a target that coincided with another curve's end
("the extension target coincides with existing geometry") instead of
extending onto that point. The stop is now joined: a new line ends on the
existing point, and a free end grows onto it held by a Coincident. The
preview shows that stop too, so the line it draws is the line the click adds.

A stop at the end of a spline or conic joins that end the same way, and
extending an infinite line now refuses instead of moving one of its two
points.

🤖 Generated with Codebuff
Co-Authored-By: Codebuff <noreply@codebuff.com>

* Extend: close an arc, take an equal stop, preview with the command's search

An arc with nothing on its path now grows all the way to its own far end and
closes into a whole circle instead of reporting that there is nothing to
extend to.

Two curves stopping the extension equally far are both on the way, so the first
stop is taken instead of refusing to choose between them.

The line preview and the command now share one stop search (`line_aim`), so the
preview can no longer draw a line the click refuses.

---------

Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net>
Co-authored-by: Codebuff <noreply@codebuff.com>
2026-10-26 11:09:42 +00:00
Dahak BuildsandDahak Builds ab709e6c46 Add base-height and new-body options to Snap Fit (#1994) (#6911)
* claim: #1994

* plastic.snap_fit: base_height and new_body options (#1994)

Base Height extends the snap fit's base below the picked face; New Body
makes the snap fit its own body so it can be patterned or moved. Both
optional, serde-defaulted, old designs replay identically.

* ui: snap_fit length-field defaults list gains the optional base height

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:09:30 +00:00
Colin Faulkingham 03bf992bc1 Keep linked components valid through Undo after Save As (#6860) (#6877)
* claim: #6860

* fix: preserve linked component targets across Save As history (#6860)
2026-10-26 11:08:32 +00:00
raykholo 189b47c750 Chamfer and Fillet refuse a point where several edges meet (#5173) (#5177) 2026-10-26 10:42:59 +00:00
Kai Evans 41a938e731 Sketch: a fillet stays the arc of its corner when the corner mirrors or a line is dragged through it (#5677)
A line tangent to an arc at the arc's end had no sense: the tangency held
with the line on either side of its touch point, so pinning a line's far
end across the corner left the line cutting back through its fillet, and
when the solver found the mirrored corner the arc kept its stored
direction and became its three-quarter complement, inside out.

The solver now keeps each fillet an arc of its corner. A line tangent at an
arc's end keeps its sense there (it leaves the arc as it did) and the arc
its side of its chord, compared with the positions before an interactive
move or the stored ones. A corner that mirrored gets its arc on the
mirrored side: its ends swapped where the solve ran the arc round the
other way with the lines following, or the arc reflected across the line
that stayed and solved again where a line cut back through. A solve that
would loop the arc the other way round, or fold a line onto it, is refused
as a fold is. A drag's cursor-following steps keep the fillets too, so a
line dragged through its own fillet stops at the arc.
2026-10-26 10:42:41 +00:00
semmelrindeandClaude Opus 5.5 613903229e Patterns: copies of a To Object extrude follow the face it reaches (#2121) (#6093)
A feature's face points are moved onto their named faces before it is
evaluated, so a To Object extrude follows its target face when an earlier
feature moves it. A pattern's or mirror's copies were built from the
feature as stored, with the face where it was picked: after a gear's disc
was made thicker, the tooth reached the new top but its pattern copies
kept the old height. The copies now use the same moved points; the move
is one helper used in both places.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:28 +00:00
Jesper We 8a28d13161 Perspective view as a command, so a 3D mouse button can switch it (#6143)
* claim: Perspective view as a command

* Perspective view as a command, so a 3D mouse button can switch it
2026-10-26 10:42:18 +00:00
NOWN-DEVandClaude Opus 5.5 74321f8bbd Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it (#6272)
* Test: sketch Intersect keeps its exact cuts, crosses curved faces on the surface, cuts on a top face

Intersect's cut of a box, a cylinder, a sphere and a tilted cylinder, as it is on main, pinned.
Two cases where it is not exact: a plane through a cylinder's rim cuts the mesh's chord (its sides
come out at 6.3159 and 6.3085, not the square root of 40; a hole's walls at 25.0122), and a plane
on a body's top face finds nothing ("projects to nothing on this sketch plane").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it

Problem: the plane cut that sketch Intersect makes of a body's mesh (project::section) took a
crossing on an edge where a curved face meets another (a cylinder's rim on its cap) from the
merged normals, which are undefined at the crease, so it fell on the chord: a cylinder's sides came
out 0.01 mm off and uneven. A plane through a vertex or on a face counted the vertices on it as
below, so a plane on a body's top face crossed no edge and found nothing.

Solution: the crossings are found by section_segments, which section fits as before: an edge where
a curved face meets another takes the curved face's normals, so the crossing lies on its surface;
a vertex within 1e-9 x the mesh's size of the plane is on it, on one side for every edge (below
when the mesh lies on or above the plane, else above), and an edge ending there crosses at that
vertex, which is an exact point for the fit. Each segment keeps its B-rep face, for a section that
groups them by face. Cuts that were exact are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:08 +00:00
raykholo c8314687fc Construction points and axes: Browser rows, and pickable in the view and dialogs (#4312) (#4320) 2026-10-26 04:50:46 +00:00
raykholo 878339cac8 Sketch patterns: count, spacing, and angle follow parameters (#5231) (#5332) 2026-10-26 04:31:55 +00:00
bherbruckandClaude Opus 5.5 348bbc1dfa fix(joints): edge and corner picks follow the part when it changes (#6942)
The Joint dialog kept a round edge (a hole's rim), a straight edge and a
corner as plain points where they were picked. When the part got thicker,
a hole moved or the part got longer, the origin stayed where it was and
the jointed part overlapped the other one. An edit that left the picked
spot where it was (lengthening an arm away from the jointed hole) looked
fine, which hid it. Faces and hole walls were already found by name.

The dialog now sends a round edge as its circle's centre with its z, and a
straight edge or corner as an edge pick with its z. The engine keeps them
by name (the round end by its wall and the face across its rim, the edge
and corner by their edge and face names), with the frame the pick showed;
where it can't (no planar face beside the edge, no names), it keeps the
point as before. Edge origins get an optional axis (along the edge, or a
fixed direction) so a hinge on an edge keeps turning about it.

Tests: every joint type and as-built, for each way the dialog picks an
origin, with the arm made thicker, its hole moved and the arm lengthened,
inside one design and through Update Links.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 04:05:26 +00:00
262f5c61c0 Move, Align and previews on placed components (#4455)
* Move and Align on placed components: picks and vectors where they are shown

A body in a component placed away from its own frame (an imported part
set upright) moved the wrong way: Move's vector, axis and pivot were
taken in the root's frame, so moving the upright plate up moved it along
its own frame's z. They now turn with the frame of the bodies moved.

Align mapped each pick into the frame of the body under it, so aligning
two separately placed parts mixed two frames (the plate landed at right
angles), and its snap points were never mapped at all. Align now finds
its picks, face normals and snaps where the view shows them and takes
both ends into the moved bodies' frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preview: a feature's tool is drawn where its component is shown

Extrude, revolve and the primitives preview their tool on its own. That
preview was built in the model's frame, so on a component placed away
from it (an imported part set upright, edited with its component
active) the tool showed at right angles to the picked face, though the
feature itself came out right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Follow main's lazy body frames and first-part grounding in the placed-component work

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 03:28:14 +00:00
816bcf10de Every new command comes with input and output schemas (#2829) (#4035)
* Every new command comes with input and output schemas

A test fails for a command without a contract or an output type, unless it is a planned!
placeholder or listed in schema/unconverted.txt, which holds the 400 commands that predate
the rule and only shrinks: the test also fails when a listed command has its schemas, when
the list names a command that doesn't exist, or when it isn't sorted.

`checked!` now takes only the command's id and checks the contract that id publishes
(`run_checked_as`), so the contract enforced is always the one described. Another test runs
every command that has a contract in strict with an unknown key, so a contract is never
published without `checked!`, under the command's own id, enforcing it.

A new book page, Command schemas, explains how to write a contract and a reply type, the
tests to add, the shared field types and how to add one, with a checklist; the failure
messages point to it. "Adding a command", CONTRIBUTING.md and AGENTS.md now include the
schemas, and the MCP tool description and docs/mcp.md no longer list the converted commands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the commands added on main since: view.layout, view.history_layout, view.normal_to

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Command schemas guide: what participants and targets do, checking the evaluation, warning-free replies

- `participants` changes the result for some features and nothing for others; where it and
  another key override each other, or where it has no effect, say so in that key's
  description or in the summary.
- The example primitive's `targets` default to every body in the feature's component, not the
  bodies it meets; they're ignored when `participants` lists bodies.
- Check what each value does where the feature is evaluated, not only how the handler reads it.
- A reply test runs every form in Warn and checks for no `param_warnings` (Strict for a reply
  that isn't an object).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 43 commands added on main since: frame, component, render and others

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 11 commands added on main since: browser folding, standard views, parameter sweep, path flange

browser.collapse_all, browser.expand_all, inspect.parameter_sweep, sheet.path_flange and the
seven view.* standard views (back, bottom, front, isometric, left, right, top) landed on main
without schemas; the gate flags them, as intended. 457 commands listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Schema rule warns instead of failing for now

A command without input and output schemas prints a warning listing it
(test output and a CI annotation). SCHEMA_RULE_STRICT in coverage_tests.rs
(or SOLIDCRAFT_SCHEMA_RULE_STRICT=1) makes it fail again. Docs say "should,
and will become required".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 01:43:02 +00:00
leValdemar19andClaude Opus 5.5 b94692497e Sketch Dimension: arc length from an arc and its end point (#754) (#4245)
* claim: #754

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Dimension: arc length from an arc and its end point (#754)

The arc-length dimension existed (sketch.dimension type arc_length) but
the Dimension tool could only give an arc its radius. An arc and one of
its own end points, in either order, now dimension the arc's length:
click the arc, then its end. The pair was refused before ("cannot
dimension that combination"), so no existing result changes. A point
where the arc's end is (a coincident line end) counts as that end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 22:17:01 +00:00
ChrisNo a3890b3bd5 Open a linked part from its assembly Browser row (#2348) (#2349)
* claim: #2348

* Open linked designs from assembly browser

* claim: #2348

* Test linked design action with multiple components selected

* Fix linked design lookup in browser storage and translate its menu action

* Add Turn Up Axis to complete UI catalogs

* Keep browser DXF download after linked-design checks
2026-10-25 21:15:48 +00:00
59cad5f0bb Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle

* feat: persist component colors and add cycling controls

* feat: assign component colors in creation order

* fix: update component color menu integration and translations

* fix: proper description for pending format change.

* fix: deleted duplicated format change description from docs/pending.

* Compare the component colour counter in the features-only check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:11:03 +00:00
raykholo 0344a41dc4 Open and insert a DXF outside a sketch (#2052) (#4635) 2026-10-25 21:03:31 +00:00
dba8108369 Timeline: a reorder evaluates the design once, from the cache it already has (#6186) (#6187)
* claim: #6186

* Timeline: a reorder evaluates the design once, from the cache it already has (#6186)

timeline.reorder checked the move on a copy of the model, then dropped it,
so setting the reordered design evaluated the moved part of the timeline
again; reorder_many (and moving features into a group) checked on an empty
model, recomputing the whole design even for a move near the end. The
check now starts from the session's own model, and the session keeps the
model it was checked on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Marker is Copy: drop the clone

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:55:52 +00:00
f512d4a004 Move: placements of one part moved together each go the way asked (#4768) (#4849)
* Move: placements of one part moved together each go the way asked (#4768)

A part placed more than once (an imported assembly's corners, screws or
fan blades) is one body in its component. Moving several of its
placements together moved that body once per placement listed, each
placement turning the move its own way, so the copies flew apart.

When solid.move names one part through two or more placements, it now
moves those placements in the world, as occurrence.move does with space
world: a placement held by a rigid group (an imported assembly) moves with
the outermost placement holding it, one inside another being moved isn't
moved again, and root-component bodies listed are moved as bodies, all in
one undo step. Other moves are unchanged, and so is a move with copy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Free the grounded first part before the placement-move tests move it

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:28:06 +00:00
NOWN-DEVandClaude Opus 5.5 826244bb28 Text parameters: a sketch text's words built from them follow every change (#727) (#6364)
* Test: a text's words follow its text parameters, and so does its cut

A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: a sketch text's words built from them follow every change

A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Text parameters: the joints' same-but-features check compares the text parameters

The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 20:24:23 +00:00
ab7602fd0e Project: don't lay a second copy over geometry the sketch already shows (#4929)
* Project: don't lay a second copy over geometry the sketch already shows

A sketch on a face already holds the face's border, linked. Projecting that face
again, or one of the border's edges, added a second set of curves and points over
the first: on a rounded corner that shows as extra points and lines. Project now
skips a reference whose curves are all linked into the sketch already (lines,
circles, arcs), reports it as `already_projected`, and refuses a pick of nothing
new so it adds no undo step. Points on their own (the origin, a vertex) still
project.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Projecting the face a sketch already shows adds no second copy in the face scenario

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:13:46 +00:00
99d5b43024 Doc: the names of split faces no longer grow with every split (#5860) (#6045)
* claim: #5860

* Doc: stop the names of split faces from growing with every split

* Joints: the long-piece-name test takes the longest name a piece now gets

Split-face names are bounded at 512 bytes since #5860, so the test cannot
build one over 512; it takes the longest the history gives.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 19:58:56 +00:00
JK3D cbcf1fe716 component.list: group bodies, features and occurrences once (#6394) (#6395)
* claim: #6394

* perf: group bodies, features and occurrences once in component.list

component.list searched every body, every feature (three times) and every occurrence (twice)
for each component, so its cost grew with components times contents. Bodies, features,
occurrences and children are now grouped by component once, keeping their order, and each
component reads its own groups. The output is unchanged.

The new test lists nested components and checks each gets only its own bodies, features,
sketches, occurrences and children, in timeline order.
2026-10-25 18:42:06 +00:00
raykholo e21760e46d Sketch Move with a rotation swaps or drops horizontal and vertical constraints (#4645) (#4651) 2026-10-25 18:35:15 +00:00
raykholo df01e59716 Sketch: an x distance beside a y distance on the same points isn't refused (#4352) (#4387) 2026-10-25 18:27:40 +00:00
3045d0787e Dialog curve picks keep their sketch (#4057) (#4081)
* Dialog curve picks keep their sketch (#3726)

* Format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Format

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Adapt context-menu test to Sel::SketchCurve's sketch field

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Path Flange picks keep their sketch too

Path Flange (#4096) landed after this PR and still looked its path up in the newest sketch with those ids.

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 18:20:03 +00:00
dudedagger42andClaude Opus 5.5 ceed604498 Mesh export: a quality choice, so small round features get enough sides (#4747) (#4773)
Every STL, OBJ and 3MF export meshed each body with a chord tolerance of
2e-4 of its size, with no way to ask for finer: a 3 mm hole in a 200 mm
part came out with about 14 sides. file.export and file.save_mesh take
`quality`: standard (as before, the default), fine (5e-5) or finest
(1e-5), and Save As Mesh has a Quality row, remembered like its format.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 17:42:51 +00:00
44bd29acc3 Hole: refuse a position that isn't on the face (#5024) (#5029)
* claim: #5024

* Hole: refuse a position that isn't on a face (#5024)

`solid.hole` took any `position` and drilled from the nearest face, so a
point 1 mm past a box's side was accepted and cut a hole across the edge.

A position given as a point (numbers or length expressions) must now lie on
a face of a body, within the same tolerance the plastic features use for
their placement (the check is shared with them). Holes at sketch points are
unchanged.

* Hole: a position over the mouth of a bore or opening of a planar face is on that face (#5024)

A counterbore is centred on an existing bore, in the plane of the face round it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 17:42:15 +00:00
HiroKenEzandClaude Opus 5.5 aa8e8cf69c Update Links: show which linked design it reads, off the window thread (#5329) (#5512)
* claim: #5329

* Update Links: show which linked design it reads, off the window thread (#5329)

Update Links read and rebuilt every linked design on the window thread, so the
window froze, with nothing on screen, until it finished. From the toolbar it now
runs as a file operation: off the window thread, with the overlay naming the
linked design being read (cover (2 of 3)), its rebuild step and progress, and
Cancel. The assembly stays as it was until the update is in, and it lands as one
undo step. The command reports each design through doc::progress::item.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 17:41:27 +00:00
raykholo c3dd40405d Measure: open surface bodies report no volume or mass (#4257) (#4268) 2026-10-25 17:21:39 +00:00
Ahmad Khan 0f90fb7e8d Edge flange: material outside and tangent bend positions (#5941) (#6060)
* claim: #5938

* Edge flange: height measured from the outer sharp, the inner sharp or the bend tangent (#5938)

An edge flange feature takes height_from (outer, inner or tangent) in sheet.flange and Height From in the Flange dialog, saved only when it is not the outer sharp. A height shorter than the bend takes is refused with the smallest height that fits.

* Edge flange: material outside and tangent bend positions (#5941)

An edge flange's position can now be material_outside (the inner virtual sharp on the edge) or tangent (the bend's outer face tangent to the edge's face), in sheet.flange and the Flange dialog. The bend starting at the edge was already the outside position, which now also answers to bend_outside.
2026-10-25 16:25:18 +00:00
Ahmad Khan 5a5a98ee80 Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094) (#4096)
* claim: #4094

* Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094)

Path Flange (`sheet.path_flange`): sketch an open chain of lines across a sheet edge, pick the
edge and one line; each line becomes a flange as long as the line and each corner a bend, one
feature and one body. The edge flange takes further bends (`then`), each on the far edge of the
one before, and the Flange dialog shows them as rows with a bin each.
2026-10-25 11:33:42 +00:00
Colin Faulkingham 0312808b92 DXF: reject non-BMP text instead of replacing it (#5056) (#5709)
* claim: #5056

* fix: reject unsupported Unicode in DXF text (#5056)

* fix: adapt new DXF callers to fallible writer (#5056)
2026-10-25 11:01:32 +00:00
Jesper We bbc3aa4301 Offset Plane: through a point (#3765)
* claim: Offset Plane through a point

* Offset Plane: through a point instead of at a distance
2026-10-25 06:02:14 +00:00
Ahmad Khanandbegsaquib 919f54a23e Sheet metal: bend angles as the included (press-brake) angle, set per rule (#4968) (#6040)
* claim: #4968

* Sheet metal rules: bend angles as the included angle (#4968)

A sheet metal rule's angle_display (bend, the default, or included) sets
how the DXF bend notes read each bend: a 58° bend is B1 UP 122° R1 under
an included rule. The bend table always gives included_angle_deg beside
angle_deg (CSV and JSON). Set in sheet.manage_rules and the Sheet Metal
Rules dialog, listed by sheet.rules; the flange angle stays the bend angle.

* Bend table: the included angle as the CSV's last column, so the columns before it keep their places (#4968)

A test also covers a body whose base flange names its rule, which keeps that rule's notes whichever rule is active, and a bend down.

* Sheet Metal Rules: Angle Display reads Bend or Included, so the choice fits its box (#4968)

The rule editor's row contract lists the new row and the key the dialog sends.

---------

Co-authored-by: begsaquib <saquibbeg4444@gmail.com>
2026-10-25 05:11:13 +00:00
Matt Van Horn 43565cd33b Snap drawing to where two sketch curves cross (#4967) (#5342)
While drawing, the pointer snaps to the crossing of two lines, circles or
arcs and keeps the new point on both curves. Shift still prefers a midpoint.
2026-10-25 04:50:20 +00:00
rbousigues88andClaude Sonnet 5.5 157c0d68d0 Sketch Dimension: point/circle to circle or arc edge (#4064) (#4065)
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064)

Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863):
solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs.
Saved designs gain two constraint kinds, in one pending format file.

Fixes #4064.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch Dimension scenario: pick the circle at its top edge (#4064)

The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 04:29:28 +00:00
raykholo cc1e654690 Warn when a design is open elsewhere or changed on disk (#5467) (#5468)
* claim: #5467

* Warn when a design is open elsewhere or changed on disk (#5467)

The desktop app keeps a lock file next to each open design
(.~<file>.lock: computer, user, version, opened and refreshed times),
refreshes it every minute and removes it on close; a lock not
refreshed for three minutes is stale and ignored. Opening a design
that another SolidCraft has open asks: Open Read-Only, Open Anyway or
Cancel. A read-only design saves only to another file.

A design remembers its file's size and modification time when it is
opened or saved. Save over a file another program or computer changed
since asks: Save a Copy (the default), Overwrite or Cancel.

Programmatic calls never ask: doc.open reports open_elsewhere and takes
read_only, and file.save over a changed file returns an error until it
is given overwrite: true. ui.documents answers both questions.
2026-10-25 03:34:20 +00:00
raykholo 7af97e3729 Editing an Extrude or Revolve shows its sketch (#5336) (#5443)
* claim: #5336

* Editing an Extrude or Revolve shows its sketch (#5336)

A finished sketch is hidden once a feature uses it, and it stayed hidden
while that feature's dialog was open for editing, so no other profiles
could be picked. The session now holds the sketch of the feature being
edited; the edit dialog sets it while it is open and clears it however
it closes, and that sketch is drawn without changing stored visibility.
2026-10-25 03:26:36 +00:00
amolinari-autotex face5e2d31 Hole: independent tapping depth and recessed drill points (#4486)
* feat(hole): checkpoint independent tapped thread depth

* test(hole): cover independent tapped thread depth boundaries

* fix(doc): bind tapped depth to the useful cylindrical wall

* feat(hole): dimension independent thread depth in the section editor

* fix(hole): preserve custom tapping controls after main integration

* feat: add recessed-hole drill points and order depth dimensions

* fix(hole): match the current preferences and UI kit

* fix(hole): verify reference placement with independent tapping depth
2026-10-25 02:31:24 +00:00
rvmzym5xv8-starandClaude Opus 5.5 abc39685b1 Parameters: name the limit an out-of-range number or over-long expression broke (#5906)
Part of #4712.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:30:04 +00:00
Colin Faulkingham f93913b3d3 Sketch: accept curve snaps for Midpoint Line (#5981) (#6041)
* claim: #5981

* fix(sketch): resolve midpoint line snaps (#5981)
2026-10-25 02:29:47 +00:00
Colin Faulkingham 6494f8fe18 AutoConstrain: dimension construction geometry (#6173) (#6185)
* claim: #6173

* fix(sketch): dimension construction curves in AutoConstrain
2026-10-25 02:29:37 +00:00
selune 1623034973 Render: gate bundled studio-data tests in isolated engine builds (#5493) (#6202)
* claim: post-merge Render review corrections (#5493)

* fix(render): gate bundled studio tests in isolated engine builds (#5493)

Addresses jyviko review comments on #5494: compile the two positive payload-dependent regressions only with bundled-render-library. Keep all assertions and the explicit feature-absent refusals. Reproduced 5 pass / 2 fail before the fix; isolated default, CPU without pack, and CPU with pack tests plus strict scoped Clippy and repository checks pass. No production or CI configuration changes.
2026-10-25 02:29:34 +00:00
NOWN-DEVandClaude Opus 5.5 74004841b4 Sketch text: a text on a path follows the path in the same evaluation (#6215)
* Test: a text on a path follows the path when a parameter moves it

A construction line placed by a dimension that reads a parameter, and a text laid along it: after
the parameter changes the line has moved and the text has not. It follows one evaluation late.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch text: a text on a path follows the path in the same evaluation

Problem: texts are laid out with the sketch's links, before the sketch is solved. A solve that
moves the curve a text runs along (a path placed by a parameter) left the text where the path had
been before the change, so it followed one evaluation late.

Solution: after a solve that keeps the sketch's orientation, every text that runs along a curve
of its sketch is laid out again along that curve as the solve left it; a text that no longer lays
out adds its warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:31 +00:00
NOWN-DEVandClaude Opus 5.5 be08517de2 Construction: a plane on a sheet's flat face follows the face (#6217)
* Test: an offset plane on a sheet flange's face follows the flange

An offset plane on the inner face of an edge flange, picked by body and index as model.faces
lists it. When the base gets wider the flange moves along x and the plane stays where the face
was picked; a sketch on the same face follows it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Construction: a plane on a sheet's flat face follows the face

Problem: a construction plane on a flat face of a sheet body resolved the stored plane, which is
only where the face was when it was picked. When the sheet changed the plane stayed behind, while
a sketch on the same face follows it by its sheet face name.

Solution: a construction plane on a sheet's flat face resolves that face's plane as it is now, as a
sketch on the face does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:28 +00:00
NOWN-DEVandClaude Opus 5.5 3592031d5e fix: joints on an imported part's hole or face stay on that part (#6368)
The parts of one STEP assembly import share their face names, and each
part's body stays where the file has it, placed in its component by an
offset. A joint origin on a named face (a hole's centre, a face's
centre, an x reference by face, the end a round origin takes) looked the
name up on every body of the design and compared the pick, in the
joint's component coordinates, with each body as it lies. Another part's
face of that name could lie nearer, and the joint resolved on that
part's face: a pin jointed into one plate's hole landed where the other
plate's hole is relative to its plate.

named_face now looks only at the bodies of the joint's component, each
in its own coordinates, a face the name finds exactly before a piece of
it or a face it was merged into, then the nearest. The design-wide
lookup stays for a face whose body has gone to another component.
named_round, x_axis, pin_end and end_faces take the component, as
face_name_at and round_end_at already do.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:16 +00:00
NOWN-DEVandClaude Opus 5.5 b8d9db7440 fix: a face-centre joint origin stays put when a hole in its face moves or goes (#6370)
A joint origin at a face's centre (`joint.origin {face}`, `Snap::FaceCenter`) was the face's
area centroid, holes included. A hole cut into that face, moved or suppressed therefore moved
every part held at the face's centre, though the face's outline stayed where it was: on a
200 x 100 plate with a 20 mm hole, 0.31 mm for each 20 mm the hole moves and 0.62 mm when the
hole, 40 mm off the middle, is suppressed.

On a planar face with holes the origin is now the middle of the area the face's outer boundary
encloses (`outline_centre`: the face's triangle sides that no other triangle of the face runs
back along, corners matched by place, chained into loops in the face's plane; the centroid of
the loop enclosing the most area). A named face (`NamedFace::plane`) and the planar face
nearest a point (`nearest_plane`) both use it. A face without holes, or one whose mesh gives no
clean outline, keeps its centroid as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:14 +00:00
NOWN-DEVandClaude Opus 5.5 2b620338df perf: solve the joints once per parameter change (#6372)
A parameter change evaluates the model and solves the joints inside the
command (so that it can refuse a value that breaks a sketch), and
`Session::execute` refreshes again after the command and solves every joint a
second time, although nothing has moved since. On 40 small parts jointed
rigidly to a plate's holes (half of the joints lifted by an expression),
changing the lifts' parameter took 0.85 s on main and takes 0.45 s now;
changing one part's thickness, 1.96 s and 1.52 s (CLI, medians of 5 runs).

The session now keeps the design the joints were last solved for, as the
solve left it, and the model that solve read. A refresh that finds the same
model, and a design that differs from the solved one at most in its features,
leaves the joints as they are: the joints read features only through the
model, and a value edit stores the new solutions of the sketches it drove
after its solve, so its design is a new one by the time of the second
refresh. Placements and bounding boxes come out identical.

Test: `a_parameter_change_solves_the_joints_once` counts one solve per change
(two before), checks the jointed part still follows the hole, and that a
captured move of a jointed part is still solved back.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:29:11 +00:00