* Kernel: the B-rep record and the native body file come from solidcore-record
SolidCraft's portable B-rep record (`solidcraft_geom::brep`: brep.rs, topology, history,
envelope, part, curve2) and the native body file (`solidcraft_kernel::native`: the tagged binary
codec and the container) move to solidcore's `solidcore-record` crate: geometry as data, with
structural validation and no maths (solidcore's docs/layers.md, stage 1). Every caller uses
`solidcore_record::brep` and `solidcore_record::native`; the old copies are deleted.
What computes from coordinates stays with the kernel, in geom's `brep`:
- `brep::check`: the record's geometric checks (orthonormal frames, non-degenerate planes,
unit revolution axes, non-singular placements). `check::validate` and
`check::validate_built` are the record's validation and these together, and every caller of
`Brep::validate` uses them, so what is accepted is unchanged;
- `brep::label`: a surface's natural ranges (a cone's apex), `curve_interval`,
`edge_curve_interval` and `form_turns`;
- `brep::pcurve::eval`: a pcurve's point;
- `geometry::check`, `placement::moved` and `split_edges` become functions on the record.
The kernel's native module keeps the conversion between a body and its saved record
(metadata.rs) and checks the decoded record's geometry. `native/analytic.rs`, which no module
declared, is deleted.
solidcore-record is pinned to its rev on solidcore's `layer-record` branch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT
* Geometry: Vec2, Vec3, Plane and the profile types come from solidcore-record
The plain data of vectors and points, sketch planes and planar profiles (`Seg2`, `Loop2`,
`Region2`) moves to `solidcore-record`, with its constants and component-wise operators only
(owner decision, solidcore layer split). Their geometry stays in geom as traits:
`Vec2Geom`, `Vec3Geom`, `PlaneGeom`, `Seg2Geom`, `Loop2Geom`, `Region2Geom`, `Seg2ArcFit`,
`Loop2ArcFit` and `Region2ArcFit`, in scope with `use solidcraft_geom::prelude::*`. Every caller
names the types from `solidcore_record`; geom no longer defines or re-exports them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT
* Kernel: pin solidcore-record to solidcore main f5e8e9a29
solidcore-record is merged on solidcore main (tangency-labs/solidcore#2519); its crate there is
identical to the rev pinned before but for its clippy configuration. The lock is regenerated
against the merged rev.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Joint dialog kept a round edge (a hole's rim), a straight edge and a
corner as plain points where they were picked. When the part got thicker,
a hole moved or the part got longer, the origin stayed where it was and
the jointed part overlapped the other one. An edit that left the picked
spot where it was (lengthening an arm away from the jointed hole) looked
fine, which hid it. Faces and hole walls were already found by name.
The dialog now sends a round edge as its circle's centre with its z, and a
straight edge or corner as an edge pick with its z. The engine keeps them
by name (the round end by its wall and the face across its rim, the edge
and corner by their edge and face names), with the frame the pick showed;
where it can't (no planar face beside the edge, no names), it keeps the
point as before. Edge origins get an optional axis (along the edge, or a
fixed direction) so a hinge on an edge keeps turning about it.
Tests: every joint type and as-built, for each way the dialog picks an
origin, with the arm made thicker, its hole moved and the arm lengthened,
inside one design and through Update Links.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* doc: persistent names read as their structure; joint.inspect splits an edge with a blend face first
`persistent_name::{FaceName, EdgeName}` parse a face or edge name once (blends, inner walls,
copies, pieces, numbered pieces, `~k`) and write it back as the same text, bounded against
hostile input. A suffix after a blend's edge naming a later feature belongs to the blend face.
joint.inspect split an edge at its first `|`, so an edge whose first face is a blend
(`F4:blend:F3:+x|F3:+z#[…]|F5:-y`) came back as a cut-off blend name and a string that is no
face. It now uses `EdgeName::parse`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: persistent names as typed values: features, roles, suffixes, a lexer and errors that say where
`FaceName` is a base (made by a feature in a role, a blend and the edge it rounds, an inner
wall, a body's face by index, other text) and its suffixes (copy, piece, numbered piece).
Roles are typed where the vocabulary is known (top, side:<curve>, +x, face:<k>, …) and kept as
written otherwise. The text form is lexed into tokens and read by the grammar in the module's
doc; a name that doesn't read says where and what was expected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* names: read what made a face, its kind and its feature ids through persistent_name
The places that took a name apart by hand to find the feature that made a face, whether it is
a blend, a copy, a numbered piece or a wall, or to remap feature ids on copy, now ask the typed
name (`made_by`, `split_feature`, `is_blend`, `is_copy`, `is_numbered_piece`, `is_wall`,
`features`, `map`). A name that doesn't read falls back to the old text check.
- An offset of a face that only names a blend inside it (`F2:top#[F5:blend:…]`) is no longer
taken for a fillet's.
- Copying a component remaps feature ids inside a piece's `#[…]` too.
- A shell's inner wall split by a later cut keeps the qualifier on the wall.
- joint.inspect finds the sketch curve of a copied side (`side:l1@F7.2`).
Finding a face by name (strip_piece, parent_piece) is unchanged: it reads a trailing
qualifier as the whole name's and moves once the text form says where it belongs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* engine: regression tests for press-pull on a wall that only names a fillet and joint.inspect on a copied side
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* names: an edge holds one face or more; made_by reads only the leading token
An open boundary's edge has one face and an edge several faces meet at has more, so an edge name
is a list of faces (a blend's own edge still takes two at most, as before). `made_by` reads just
the leading `F<n>:`, which every name a feature made starts with, so asking it of every face
each frame stays cheap. Names are read up to 1 MiB: a face engraved with text has piece names
past 4 KiB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* persistent_name: split into lexer, parser, write, text and tests
No code changed; callers' paths stay the same (`pub use text::*`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Joints: a point origin keeps the x it is given
`joint.origin` and `joint.create` take `x` for a point origin (a
direction, laid square to z) and the point snap saves it. Two origins
given at one point with the same z and x now meet as they are: a part
turned a quarter turn about z no longer turns back (and moves) when
rigid-joined there. A point origin without x takes its x from z alone,
as before. An x along z, or of no length, is refused.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Joint relations test: a point origin has an x too
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Joints: a face or circle origin keeps its turn as the face tilts
A face- or circle-centre joint origin worked out its frame's x from the normal alone
(`Vec3::any_perp`), which switches axis where the normal crosses 0.9 along X: a part on a face
tilted past about 64° by a parameter spun a right angle about the face. New origins keep the x
they have when picked (`x`, component coordinates) and each solve lays it onto the face as it is
now, so the part tilts with the face without spinning. Origins saved without it are placed as
before.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Joints: origins on an edge of a face, at its middle or a corner
`joint.origin` and `joint.create` take `edge: [x,y,z]` (a point on an edge of a planar face),
with `on` (which face; default the larger planar face beside it) and `corner` (the end near that
point). The origin sits at the edge's middle (z out of the face, y into it) or at the corner (x
and y along its two edges into the face, right-handed whichever way the edges run). The edge, the
face and the corner's other edge are kept by name and found again on every solve, so a part set
40 mm in from a panel's corner stays there when the panel changes size; a name that finds nothing
leaves the joint out with the reason.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Motion links can carry a coupling (gear pair, rack and pinion, screw) whose ratio follows radii, picked round faces or pitch. Design format 23.
Co-authored-by: SychPL <SychPL@users.noreply.github.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>