diff --git a/tests/kernel-cases/fillets/2893-chamfer-two-distances-elliptical-rim/expected.json b/tests/kernel-cases/fillets/2893-chamfer-two-distances-elliptical-rim/expected.json index b9bf3046b..646de2443 100644 --- a/tests/kernel-cases/fillets/2893-chamfer-two-distances-elliptical-rim/expected.json +++ b/tests/kernel-cases/fillets/2893-chamfer-two-distances-elliptical-rim/expected.json @@ -2,10 +2,9 @@ "sources": [ "tangency-labs/solidcraft#2893" ], - "what": "a cylinder r5 tilted 26.6 deg from Z cut flat at z = 10, its elliptical rim chamfered 1 and 2: built, or refused as not supported, never a wrong solid", + "what": "a cylinder r5 tilted 26.6 deg from Z cut flat at z = 10, its elliptical rim chamfered 1 and 2: one closed valid solid", "source": "invariants", - "method": "the axis (1, 0, 2)/sqrt5 through (0, 0, -10) meets z = 10 at (10, 0, 10); the rim is the ellipse there with semi-axes 5 (along y) and 5 sqrt5/2 (along x); (10, 5, 10) is on it. An unequal chamfer of an ellipse has no closed-form volume: one closed valid solid, or a refusal that names the rim as not supported yet (never an SMLib status).", - "outcome": "solid_or_refused", - "refusal": "not supported yet", + "method": "the axis (1, 0, 2)/sqrt5 through (0, 0, -10) meets z = 10 at (10, 0, 10); the rim is the ellipse there with semi-axes 5 (along y) and 5 sqrt5/2 (along x); (10, 5, 10) is on it. An unequal chamfer of an ellipse has no closed-form volume: one closed valid solid (the owner, 2026-10-31: it builds).", + "outcome": "solid", "body_count": 1 } diff --git a/tests/kernel-cases/fillets/KNOWN_FAILING b/tests/kernel-cases/fillets/KNOWN_FAILING index 19b8560ab..a2bba0078 100644 --- a/tests/kernel-cases/fillets/KNOWN_FAILING +++ b/tests/kernel-cases/fillets/KNOWN_FAILING @@ -2,22 +2,18 @@ # rig gate (.github/workflows/fillet-rig.yml) fails on a case that fails and is not listed here, # and on a listed case that passes: a fix removes its line in the same pull request. # Baseline: develop 242bbc89f with the SMLib fixes of 2026-10-29 (integration-overnight + b78bd4a), aarch64 Linux. -1080-fillet-equal-slope-basin-1-mm-rim-loop-4 not supported yet: a convex round past its face is not yet built by subtraction -1080-fillet-sloped-basin-0-5-mm-rim-r4-4-edges not supported yet: a convex round past its face is not yet built by subtraction -1080-fillet-sloped-basin-1-mm-rim-r4-2-edges not supported yet: a convex round past its face is not yet built by subtraction -1080-fillet-sloped-basin-1-mm-rim-r4-4-edges not supported yet: a convex round past its face is not yet built by subtraction +1080-fillet-equal-slope-basin-1-mm-rim-loop-4 builds to the analytic volume (rel 5e-9), but the continuity check (g1 at every blend seam) takes in the mitre's creases, G0 by the mitre ruling: the case's continuity seams need the owner's word +1080-fillet-sloped-basin-0-5-mm-rim-r4-4-edges builds to the analytic volume (rel 3e-9), but the continuity check (g1 at every blend seam) takes in the mitre's creases, G0 by the mitre ruling: the case's continuity seams need the owner's word +1080-fillet-sloped-basin-1-mm-rim-r4-2-edges builds to the analytic volume (rel 6e-9), but the continuity check (g1 at every blend seam) takes in the mitre's creases, G0 by the mitre ruling: the case's continuity seams need the owner's word +1080-fillet-sloped-basin-1-mm-rim-r4-4-edges builds to the analytic volume (rel 3e-9), but the continuity check (g1 at every blend seam) takes in the mitre's creases, G0 by the mitre ruling: the case's continuity seams need the owner's word 1207-fillet-bar-top-edge-after-boss-arc-round-r0-5 SMLib's check refuses the round: internal coincident control points in a B-spline curve (an internal pole) -190-fillet-disc-rim-past-its-2mm-wall SMLib status 1001: a convex round past its face is not yet built by subtraction 2893-chamfer-distance-and-angle-past-the-wall-refused refused for another reason: SMLib SM_ERR_INVALID_INPUT, not a check saying the angle runs past the wall -2893-chamfer-two-distances-elliptical-rim SMLib status 1001 on the elliptical rim's chamfer -2893-chamfer-two-distances-past-the-bottom SMLib status 1001: SmFilletNx1ClosedCorner cannot compute the closed rim's corner geometry, where the chamfer past the bottom rim should build the frustum +2893-chamfer-two-distances-elliptical-rim SMLib status 1001: the two arcs of the rim take their chamfer offsets each at its own midpoint, where the faces' angle differs (78.5 and 101.5 deg), and their chamfers do not meet at the tangent corners (held for the owner's ruling on unequal chamfers of a varying angle) 4782-fillet-bar-edge-wider-than-both-faces SMLib status 1001: a convex round past both its faces is not yet built by subtraction -5158-fillet-round-just-past-a-10mm-face SMLib status 1001: a convex round 0.01 past its face is not yet built by subtraction (10.0001-10.04 open) +5158-fillet-round-just-past-a-10mm-face SMLib status 1001: the round passes 5e-6 under the box's top back edge, inside the body's tolerance (1e-5), and subtracting its removal region maps that edge to two of the region's faces (SmTopologyIntersector); 10.0001-10.04 open 9-fillet-corner-curvature-with-reduce-fit not supported yet: solid.fillet builds corner g2 with the exact fit only 9-fillet-corner-curvature-with-taper-fit not supported yet: solid.fillet builds corner g2 with the exact fit only -926-chamfer-top-edge-ending-on-boss-wall-above-it not supported yet: the chamfer is refused as larger than its faces where it ends on the boss's wall cov-chamfer-concave-edge-through-up-down-joined-squares SMLib status 1001 on the concave chamfer's tangent chain cov-chamfer-outer-corner-edge-of-a-shelled-box-with-a-lip SMLib's chamfer result is not a closed solid where it ends on the lip cov-fillet-arc-edge-on-an-oblique-cut-of-a-bar SMLib's check refuses the round: internal coincident control points in a B-spline curve every-block-cylinder-crease-top-edge-after-arc-round-r1 the r1 round's contact seam with the block's side face reads 60 degrees (the cylinder wall's normal) at its end on the crease (8.660, 5, 15.284): G0 where the round is built tangent -every-hole-top-rim-r12-past-plate-bottom SMLib status 1001: a convex round past its face on the tangent side is not yet built by subtraction