diff --git a/tests/KNOWN_FAILING_TESTS b/tests/KNOWN_FAILING_TESTS index 49db644ff..7edd78e07 100644 --- a/tests/KNOWN_FAILING_TESTS +++ b/tests/KNOWN_FAILING_TESTS @@ -7,14 +7,27 @@ # directory each (`gh run download -R tangency-labs/solidcraft -n -D /` # for junit and junit-gpu-1..4), run `cargo xtask known-failing --junit `, then drop each # FIXED line and add each REGRESSION line with its cause, from the test's failure message. -# Baseline: develop 38fd4a4f6 (CI run 41157648345, x86_64 Linux), after the SMLib eaa998a pin. +# Baseline: develop 2bf58241f (CI run 41522001173, x86_64 Linux), after the SMLib a18bbe5 pin (v1.1.0-alpha). solidcraft-cli::action_matrix::action_matrix_sample 2 baseline actions fail on SMLib: 2 shells (Bad Loop Orient on issue-616-lid-ribs; status 1001 on filleted-shelled-box, shelled again open at an inner wall) solidcraft-cli::naming_corpus::corpus_designs_name_alike_every_build_and_fail_where_a_reference_is_gone oracle/83-boundary-loop-thicken does not load: step 8, SMLib thicken status 1001 +solidcraft-doc::eval::chain_tests::a_propagated_chain_that_cannot_build_says_how_to_blend_the_edge_alone the propagated chain now builds a round (9 faces), so there is no refusal to read, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established solidcraft-engine::tests::fillet_fit_taper_closes_to_a_point SMLib fillet status 1001 on the taper fit (radius 16 closing to 0) -solidcraft-engine::tests::shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls SMLib shell status 1034 on a box with all 12 edges rounded (Ball corners since 5e8c9c1), opened at one face (tangency-labs/smlib#102) +solidcraft-engine::tests::robustness::fillet_into_an_earlier_round R2 into the earlier round: volume 35923.387 against 35919.524, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established solidcraft-kernel::blend::corner_tests::a_round_ending_in_an_earlier_round_matches_both_together SMLib fillet status 1001 on the round that ends in the earlier one solidcraft-kernel::blend::corner_tests::corner_blends_hold_at_any_scale at 0.01x a picked edge runs on tangentially into an unblended edge and SMLib's result is not a closed solid (the smooth-vertex End, tangency-labs/smlib#81) +solidcraft-kernel::blend_corner::tests::a_round_next_to_a_round_of_another_radius the face count is 9, not the expected count, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established solidcraft-kernel::blend_corner::tests::issue2422_vertical_after_separate_bottom_rounds SMLib's check refuses the fillet: edge and vertex tolerance 0.97 against the body's 0.01 (#2422) +solidcraft-kernel::blend_smlib::tests::smooth_edges_and_unfinished_tangent_chains_are_refused_saying_why the smooth edge builds (volume 7957.723) where a refusal is expected, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established +solidcraft-kernel::corner_g2::tests::a_concave_corner_takes_the_g2_patch_too the concave G2 corner's curvature jump clear of the corners is 5.5e-2, above the bound, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established solidcraft-kernel::corner_g2::tests::a_long_setback_keeps_the_g2_patch_inside_the_box at set backs 11 to 15 the G2 corner patch bulges 2.6e-6 to 1.33e-3 past the box (the explicit corner is in progress) +solidcraft-kernel::corner_g2::tests::curvature_rounds_meet_at_a_g2_corner the corner loop's fill misses its neighbours' curvature by 1.6e-3 (tolerance 1e-3), on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established +solidcraft-kernel::corner_g2::tests::set_back_8_the_g2_corner_lies_between_the_hull_and_the_prisms set back 8: the G2 corner's distance check reads 0.0611, past its bound (volume 47370.642, in range), on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established solidcraft-kernel::corner_g2::tests::the_box_corner_g2_patch_is_a_closed_solid_curvature_continuous_to_its_neighbours the fitted G2 corner patch bulges 1.7e-5 past the box, which SMLib's exact tight box now sees (the explicit G2 corner builds it inside) +solidcraft-kernel::issue_851_tests::blend_the_arc_top_edge_and_the_top_front_edge removes 59.148 against 60.122, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established +solidcraft-kernel::issue_851_tests::fillet_the_arc_top_edge_and_the_front_upright_at_the_arc removes 31.497 against 32.310, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established +solidcraft-kernel::issue_851_tests::fillet_the_top_front_edge_and_the_front_left_upright removes 42.236 against 43.187, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established +solidcraft-kernel::issue_851_tests::fillet_the_top_front_edge_and_the_front_upright_at_the_arc removes 41.341 against 42.146, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established +solidcraft-kernel::smooth_edges::tests::a_seam_split_in_two_edges_is_drawn_whole the side seam is one edge ([24]), not split in two, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established solidcraft-kernel::tests::fillet_tabbed_plate_outer_loop_and_partial_selection_after_hole the partial selection runs on tangentially into an unblended edge and SMLib's result is not a closed solid (the smooth-vertex End, tangency-labs/smlib#81) +solidcraft-smlib::ops::tests::a_setback_corner_left_open_returns_its_hole the open corner returns holes of 9, 27 and 19 edges, not its one hole; SMLib's open_holes counts a seam edge its own face uses twice as free (fixed for v1.1.0-alpha.1) +solidcraft-smlib::ops::tests::fillet_takes_exactly_the_picked_edges one round on the picked edge gives 9 faces, not the expected count, on SMLib v1.1.0-alpha (a18bbe5), passed on f916a8d; cause being established diff --git a/tests/oracle/37-pyramid-apex-blend/expected.json b/tests/oracle/37-pyramid-apex-blend/expected.json index 6edd3e21f..faf45e1f5 100644 --- a/tests/oracle/37-pyramid-apex-blend/expected.json +++ b/tests/oracle/37-pyramid-apex-blend/expected.json @@ -1,6 +1,5 @@ { "source": "freecad 1.1.4", - "known_failure": "the apex blend's shape is 0.193 mm off the reference (at most 0.05)", "method": "FreeCAD (OpenCASCADE) build of recipe.json by tools/freecad-oracle/build.py: Part.makeLoft, Part makeFillet", "body_count": 1, "volume_mm3": 15465.577113384288,