diff --git a/tests/kernel-cases/fillets/851-fillet-arc-and-upright/expected.json b/tests/kernel-cases/fillets/851-fillet-arc-and-upright/expected.json index d4996271d..76971d243 100644 --- a/tests/kernel-cases/fillets/851-fillet-arc-and-upright/expected.json +++ b/tests/kernel-cases/fillets/851-fillet-arc-and-upright/expected.json @@ -5,7 +5,32 @@ ], "what": "on #851's knife-edge part (tessellation/1263): the arc's top edge and the front upright at the arc, R2 together", "source": "invariants", - "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes is the right answer (where a round ends on a face or in another round the seam is not a blend's tangent seam, so no order is graded)", + "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes. Each round meets the faces it rolls on G1: graded at its seams' middles (the top front round's at z = 8 on the front and y = -19 on the top; the arc's at rho 23 on the top and rho 21, z = 8 on the wall; the uprights' at their contacts, z = 5). Where a round ends on a face or on another round the seam is a crease by construction and is not graded.", "body_count": 1, - "watertight": true + "watertight": true, + "continuity": { + "order": "g1", + "edges": [ + [ + 45.903210699376075, + -4.736544032709407, + 10 + ], + [ + 47.31742426174917, + -6.150757595082501, + 8 + ], + [ + 39.253788191887466, + -21, + 5 + ], + [ + 41.24621240708566, + -19.17391304347826, + 5 + ] + ] + } } diff --git a/tests/kernel-cases/fillets/851-fillet-arc-then-top-front/expected.json b/tests/kernel-cases/fillets/851-fillet-arc-then-top-front/expected.json index 2aa869b93..6fca09595 100644 --- a/tests/kernel-cases/fillets/851-fillet-arc-then-top-front/expected.json +++ b/tests/kernel-cases/fillets/851-fillet-arc-then-top-front/expected.json @@ -5,7 +5,32 @@ ], "what": "on #851's knife-edge part (tessellation/1263): the arc's top edge R2, then the top front edge R2 as a fillet of its own", "source": "invariants", - "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes is the right answer (where a round ends on a face or in another round the seam is not a blend's tangent seam, so no order is graded)", + "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes. Each round meets the faces it rolls on G1: graded at its seams' middles (the top front round's at z = 8 on the front and y = -19 on the top; the arc's at rho 23 on the top and rho 21, z = 8 on the wall; the uprights' at their contacts, z = 5). Where a round ends on a face or on another round the seam is a crease by construction and is not graded.", "body_count": 1, - "watertight": true + "watertight": true, + "continuity": { + "order": "g1", + "edges": [ + [ + 45.903210699376075, + -4.736544032709407, + 10 + ], + [ + 47.31742426174917, + -6.150757595082501, + 8 + ], + [ + 20, + -21, + 8 + ], + [ + 20, + -19, + 10 + ] + ] + } } diff --git a/tests/kernel-cases/fillets/851-fillet-top-front-and-arc/expected.json b/tests/kernel-cases/fillets/851-fillet-top-front-and-arc/expected.json index bace7c8d3..da36eca74 100644 --- a/tests/kernel-cases/fillets/851-fillet-top-front-and-arc/expected.json +++ b/tests/kernel-cases/fillets/851-fillet-top-front-and-arc/expected.json @@ -5,7 +5,32 @@ ], "what": "on #851's knife-edge part (tessellation/1263): the top front edge and the arc's top edge, R2 together", "source": "invariants", - "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes is the right answer (where a round ends on a face or in another round the seam is not a blend's tangent seam, so no order is graded)", + "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes. Each round meets the faces it rolls on G1: graded at its seams' middles (the top front round's at z = 8 on the front and y = -19 on the top; the arc's at rho 23 on the top and rho 21, z = 8 on the wall; the uprights' at their contacts, z = 5). Where a round ends on a face or on another round the seam is a crease by construction and is not graded.", "body_count": 1, - "watertight": true + "watertight": true, + "continuity": { + "order": "g1", + "edges": [ + [ + 20, + -21, + 8 + ], + [ + 20, + -19, + 10 + ], + [ + 45.903210699376075, + -4.736544032709407, + 10 + ], + [ + 47.31742426174917, + -6.150757595082501, + 8 + ] + ] + } } diff --git a/tests/kernel-cases/fillets/851-fillet-top-front-and-front-left-upright/expected.json b/tests/kernel-cases/fillets/851-fillet-top-front-and-front-left-upright/expected.json index bd6d3dbf1..11ff0835a 100644 --- a/tests/kernel-cases/fillets/851-fillet-top-front-and-front-left-upright/expected.json +++ b/tests/kernel-cases/fillets/851-fillet-top-front-and-front-left-upright/expected.json @@ -5,7 +5,32 @@ ], "what": "on #851's knife-edge part (tessellation/1263): the top front edge and the front-left upright, R2 together", "source": "invariants", - "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes is the right answer (where a round ends on a face or in another round the seam is not a blend's tangent seam, so no order is graded)", + "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes. Each round meets the faces it rolls on G1: graded at its seams' middles (the top front round's at z = 8 on the front and y = -19 on the top; the arc's at rho 23 on the top and rho 21, z = 8 on the wall; the uprights' at their contacts, z = 5). Where a round ends on a face or on another round the seam is a crease by construction and is not graded.", "body_count": 1, - "watertight": true + "watertight": true, + "continuity": { + "order": "g1", + "edges": [ + [ + 20, + -21, + 8 + ], + [ + 20, + -19, + 10 + ], + [ + 0, + -19, + 5 + ], + [ + 2, + -21, + 5 + ] + ] + } } diff --git a/tests/kernel-cases/fillets/851-fillet-top-front-and-upright/expected.json b/tests/kernel-cases/fillets/851-fillet-top-front-and-upright/expected.json index 25758b97d..c91010341 100644 --- a/tests/kernel-cases/fillets/851-fillet-top-front-and-upright/expected.json +++ b/tests/kernel-cases/fillets/851-fillet-top-front-and-upright/expected.json @@ -5,7 +5,32 @@ ], "what": "on #851's knife-edge part (tessellation/1263): the top front edge and the front upright at the arc, R2 together", "source": "invariants", - "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes is the right answer (where a round ends on a face or in another round the seam is not a blend's tangent seam, so no order is graded)", + "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes. Each round meets the faces it rolls on G1: graded at its seams' middles (the top front round's at z = 8 on the front and y = -19 on the top; the arc's at rho 23 on the top and rho 21, z = 8 on the wall; the uprights' at their contacts, z = 5). Where a round ends on a face or on another round the seam is a crease by construction and is not graded.", "body_count": 1, - "watertight": true + "watertight": true, + "continuity": { + "order": "g1", + "edges": [ + [ + 20, + -21, + 8 + ], + [ + 20, + -19, + 10 + ], + [ + 39.253788191887466, + -21, + 5 + ], + [ + 41.24621240708566, + -19.17391304347826, + 5 + ] + ] + } } diff --git a/tests/kernel-cases/fillets/851-fillet-top-front-then-front-left-upright/expected.json b/tests/kernel-cases/fillets/851-fillet-top-front-then-front-left-upright/expected.json index dc1f8ff38..f47364e63 100644 --- a/tests/kernel-cases/fillets/851-fillet-top-front-then-front-left-upright/expected.json +++ b/tests/kernel-cases/fillets/851-fillet-top-front-then-front-left-upright/expected.json @@ -5,7 +5,32 @@ ], "what": "on #851's knife-edge part (tessellation/1263): the top front edge R2, then the front-left upright R2 as a fillet of its own, ending in the first round", "source": "invariants", - "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes is the right answer (where a round ends on a face or in another round the seam is not a blend's tangent seam, so no order is graded)", + "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes. Each round meets the faces it rolls on G1: graded at its seams' middles (the top front round's at z = 8 on the front and y = -19 on the top; the arc's at rho 23 on the top and rho 21, z = 8 on the wall; the uprights' at their contacts, z = 5). Where a round ends on a face or on another round the seam is a crease by construction and is not graded.", "body_count": 1, - "watertight": true + "watertight": true, + "continuity": { + "order": "g1", + "edges": [ + [ + 20, + -21, + 8 + ], + [ + 20, + -19, + 10 + ], + [ + 0, + -19, + 5 + ], + [ + 2, + -21, + 5 + ] + ] + } } diff --git a/tests/kernel-cases/fillets/851-fillet-top-front-then-upright/expected.json b/tests/kernel-cases/fillets/851-fillet-top-front-then-upright/expected.json index 1ddc9ac33..327c7cb9f 100644 --- a/tests/kernel-cases/fillets/851-fillet-top-front-then-upright/expected.json +++ b/tests/kernel-cases/fillets/851-fillet-top-front-then-upright/expected.json @@ -5,7 +5,32 @@ ], "what": "on #851's knife-edge part (tessellation/1263): the top front edge R2, then the front upright at the arc R2 as a fillet of its own", "source": "invariants", - "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes is the right answer (where a round ends on a face or in another round the seam is not a blend's tangent seam, so no order is graded)", + "method": "the rolling ball of R2 fits on every one of these edges and where they meet; the corner between rounds that end in each other has no closed form here: one closed valid solid whose display mesh closes. Each round meets the faces it rolls on G1: graded at its seams' middles (the top front round's at z = 8 on the front and y = -19 on the top; the arc's at rho 23 on the top and rho 21, z = 8 on the wall; the uprights' at their contacts, z = 5). Where a round ends on a face or on another round the seam is a crease by construction and is not graded.", "body_count": 1, - "watertight": true + "watertight": true, + "continuity": { + "order": "g1", + "edges": [ + [ + 20, + -21, + 8 + ], + [ + 20, + -19, + 10 + ], + [ + 39.253788191887466, + -21, + 5 + ], + [ + 41.24621240708566, + -19.17391304347826, + 5 + ] + ] + } }