From c97887e6045b81ec95b470ddffdcaee8ee489e26 Mon Sep 17 00:00:00 2001 From: bherbruck Date: Wed, 21 Oct 2026 05:42:46 -0400 Subject: [PATCH] kernel-cases: shell and offset from #12-#4144 (21 cases, 59 skipped) 4009 closed shell, 4010 shell open at a hole wall, 2531 point pick after an edit, 3468/3898 offset next to a fillet, 12 split face piece, 566 swept bar, 745/3893 freeform boss (two variants), 3103 tapered cylinder, 3669/2990 loft, 3283/3650 and 2939 curved offsets, 3506 and 1972 split then shell, 3576, 391, 1494, 1525. Co-Authored-By: Claude Opus 5.5 --- .../expected.json | 11 + .../recipe.json | 49 ++++ .../expected.json | 9 + .../recipe.json | 43 ++++ .../expected.json | 9 + .../recipe.json | 154 ++++++++++++ .../expected.json | 10 + .../recipe.json | 43 ++++ .../expected.json | 11 + .../recipe.json | 123 +++++++++ .../2939-offset-face-sphere/expected.json | 17 ++ .../shell/2939-offset-face-sphere/recipe.json | 23 ++ .../3103-shell-tapered-cylinder/expected.json | 10 + .../3103-shell-tapered-cylinder/recipe.json | 45 ++++ .../expected.json | 17 ++ .../recipe.json | 62 +++++ .../expected.json | 12 + .../recipe.json | 51 ++++ .../expected.json | 11 + .../recipe.json | 59 +++++ .../expected.json | 9 + .../recipe.json | 76 ++++++ .../expected.json | 12 + .../recipe.json | 80 ++++++ .../expected.json | 9 + .../recipe.json | 152 +++++++++++ .../expected.json | 17 ++ .../recipe.json | 41 +++ .../expected.json | 15 ++ .../recipe.json | 65 +++++ .../expected.json | 10 + .../566-shell-swept-bar-with-bend/recipe.json | 112 +++++++++ .../expected.json | 10 + .../recipe.json | 107 ++++++++ .../expected.json | 12 + .../recipe.json | 124 +++++++++ tests/kernel-cases/shell/skipped.json | 238 ++++++++++++++++++ 37 files changed, 1858 insertions(+) create mode 100644 tests/kernel-cases/shell/12-offset-one-split-face-piece/expected.json create mode 100644 tests/kernel-cases/shell/12-offset-one-split-face-piece/recipe.json create mode 100644 tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/expected.json create mode 100644 tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/recipe.json create mode 100644 tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/expected.json create mode 100644 tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/recipe.json create mode 100644 tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/expected.json create mode 100644 tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/recipe.json create mode 100644 tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/expected.json create mode 100644 tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/recipe.json create mode 100644 tests/kernel-cases/shell/2939-offset-face-sphere/expected.json create mode 100644 tests/kernel-cases/shell/2939-offset-face-sphere/recipe.json create mode 100644 tests/kernel-cases/shell/3103-shell-tapered-cylinder/expected.json create mode 100644 tests/kernel-cases/shell/3103-shell-tapered-cylinder/recipe.json create mode 100644 tests/kernel-cases/shell/3283-offset-face-cylinder-wall/expected.json create mode 100644 tests/kernel-cases/shell/3283-offset-face-cylinder-wall/recipe.json create mode 100644 tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/expected.json create mode 100644 tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/recipe.json create mode 100644 tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/expected.json create mode 100644 tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/recipe.json create mode 100644 tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/expected.json create mode 100644 tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/recipe.json create mode 100644 tests/kernel-cases/shell/3669-shell-lofted-square-frustum/expected.json create mode 100644 tests/kernel-cases/shell/3669-shell-lofted-square-frustum/recipe.json create mode 100644 tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/expected.json create mode 100644 tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/recipe.json create mode 100644 tests/kernel-cases/shell/4009-closed-shell-internal-void/expected.json create mode 100644 tests/kernel-cases/shell/4009-closed-shell-internal-void/recipe.json create mode 100644 tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/expected.json create mode 100644 tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/recipe.json create mode 100644 tests/kernel-cases/shell/566-shell-swept-bar-with-bend/expected.json create mode 100644 tests/kernel-cases/shell/566-shell-swept-bar-with-bend/recipe.json create mode 100644 tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/expected.json create mode 100644 tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/recipe.json create mode 100644 tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/expected.json create mode 100644 tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/recipe.json create mode 100644 tests/kernel-cases/shell/skipped.json diff --git a/tests/kernel-cases/shell/12-offset-one-split-face-piece/expected.json b/tests/kernel-cases/shell/12-offset-one-split-face-piece/expected.json new file mode 100644 index 000000000..12106aa49 --- /dev/null +++ b/tests/kernel-cases/shell/12-offset-one-split-face-piece/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#12" + ], + "what": "Offset Face on one piece of a split face moves only that piece, not the coplanar neighbour", + "source": "analytic", + "method": "box 40x30x10, top face split at x=20; the x<20 piece moves up 2 mm: V=12000+20*30*2=13200; faces: bottom, front, back, left, right, two top pieces, step wall at x=20 = 8; bbox z 0..12", + "body_count": 1, + "volume_mm3": 13200, + "faces": 8 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/12-offset-one-split-face-piece/recipe.json b/tests/kernel-cases/shell/12-offset-one-split-face-piece/recipe.json new file mode 100644 index 000000000..4a616f052 --- /dev/null +++ b/tests/kernel-cases/shell/12-offset-one-split-face-piece/recipe.json @@ -0,0 +1,49 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 40, + "width": 30, + "height": 10 + } + }, + { + "command": "solid.split_face", + "params": { + "faces": [ + [ + 10, + 15, + 10 + ] + ], + "plane": { + "origin": [ + 20, + 0, + 0 + ], + "normal": [ + 1, + 0, + 0 + ] + } + } + }, + { + "command": "solid.offset_face", + "params": { + "faces": [ + [ + 10, + 15, + 10 + ] + ], + "distance": 2 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/expected.json b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/expected.json new file mode 100644 index 000000000..5763000b7 --- /dev/null +++ b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1494" + ], + "what": "a 47.5x45x30 box with a cylinder r7.5 joined on its side whose axis lies in the plane of the box's front face (y=0), shelled 1 mm open at the bottom", + "source": "invariants", + "method": "the cylinder wall's seam lies on the front plane, giving a five-face saddle corner at (47.5,0,2.5). No closed-form volume (the cavity corners follow the offset surfaces); the shell must succeed and give one valid closed body", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/recipe.json b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/recipe.json new file mode 100644 index 000000000..56dc5f9f6 --- /dev/null +++ b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/recipe.json @@ -0,0 +1,43 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "height": 30.0, + "length": 47.5, + "width": 45.0 + } + }, + { + "command": "solid.cylinder", + "params": { + "axis": [ + 1.0, + 0.0, + 0.0 + ], + "base": [ + 47.5, + 0.0, + 10.0 + ], + "height": 30.0, + "operation": "join", + "radius": 7.5 + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 23.75, + 22.5, + 0.0 + ] + ], + "thickness": 1.0 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/expected.json b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/expected.json new file mode 100644 index 000000000..d71d868c3 --- /dev/null +++ b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1525" + ], + "what": "a 50x50x30 box with r10 vertical rounds, a 5 mm chamfer round the base and a 4 mm fillet where the chamfer meets the wall, shelled 2 mm open at the top", + "source": "invariants", + "method": "every radius and the chamfer have room for a 2 mm wall, so the shell must succeed: one valid closed body (no closed-form volume with the blend patches)", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/recipe.json b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/recipe.json new file mode 100644 index 000000000..7e4f22846 --- /dev/null +++ b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/recipe.json @@ -0,0 +1,154 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + 0 + ], + "length": 50, + "width": 50, + "height": 30 + } + }, + { + "command": "solid.fillet", + "params": { + "edges": [ + [ + 0, + 0, + 15 + ], + [ + 50, + 0, + 15 + ], + [ + 0, + 50, + 15 + ], + [ + 50, + 50, + 15 + ] + ], + "radius": 10 + } + }, + { + "command": "solid.chamfer", + "params": { + "edges": [ + [ + 25, + 0, + 0 + ], + [ + 50, + 25, + 0 + ], + [ + 25, + 50, + 0 + ], + [ + 0, + 25, + 0 + ], + [ + 2.929, + 2.929, + 0 + ], + [ + 47.071, + 2.929, + 0 + ], + [ + 47.071, + 47.071, + 0 + ], + [ + 2.929, + 47.071, + 0 + ] + ], + "distance": 5 + } + }, + { + "command": "solid.fillet", + "params": { + "edges": [ + [ + 25, + 0, + 5 + ], + [ + 50, + 25, + 5 + ], + [ + 25, + 50, + 5 + ], + [ + 0, + 25, + 5 + ], + [ + 2.929, + 2.929, + 5 + ], + [ + 47.071, + 2.929, + 5 + ], + [ + 47.071, + 47.071, + 5 + ], + [ + 2.929, + 47.071, + 5 + ] + ], + "radius": 4 + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 25, + 25, + 30 + ] + ], + "thickness": 2 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/expected.json b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/expected.json new file mode 100644 index 000000000..24f9e9dff --- /dev/null +++ b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1972" + ], + "what": "a sphere split into two hemispheres; shelling the flat face of one must hollow that half only, the other half stays solid", + "source": "analytic", + "method": "two hemispheres r10, flat faces coincident at z=0. The pick (3,2,0) lies on both flat faces, so the body is named. The named half becomes a hollow hemisphere with cavity r8 open at the flat face: V=2/3*pi*(10^3-8^3); the other half is untouched: 2/3*pi*10^3. Total of two bodies", + "body_count": 2, + "volume_mm3": 3116.4599123610747 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/recipe.json b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/recipe.json new file mode 100644 index 000000000..55c942210 --- /dev/null +++ b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/recipe.json @@ -0,0 +1,43 @@ +{ + "commands": [ + { + "command": "solid.sphere", + "params": { + "radius": 10, + "body_name": "Ball" + } + }, + { + "command": "solid.split_body", + "params": { + "body": "Ball", + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "normal": [ + 0, + 0, + 1 + ] + } + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 3, + 2, + 0 + ] + ], + "thickness": 2, + "body": "Ball" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/expected.json b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/expected.json new file mode 100644 index 000000000..f4a4e4e43 --- /dev/null +++ b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2531" + ], + "what": "a shell opened by a point pick keeps opening only that face after a parameter edit moves the body under the stored point", + "source": "analytic", + "method": "after L=150, Y0=15 the bar is 150x20x20 at y 15..35, shelled 2 mm with only the right end (x=150) open: V=60000-148*16*16=22112; faces 5 outer + right-end ring + 5 inner = 11; the stored point (100,15,10) now lies in the bottom (y=15) face, which must stay closed", + "body_count": 1, + "volume_mm3": 22112, + "faces": 11 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/recipe.json b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/recipe.json new file mode 100644 index 000000000..e601a1f7d --- /dev/null +++ b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/recipe.json @@ -0,0 +1,123 @@ +{ + "commands": [ + { + "command": "parameters.add", + "params": { + "name": "L", + "expression": "100 mm", + "unit": "mm" + } + }, + { + "command": "parameters.add", + "params": { + "name": "Y0", + "expression": "5 mm", + "unit": "mm" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "S" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 5 + ], + "p1": [ + 100, + 25 + ] + } + }, + { + "command": "sketch.constraint.horizontal_vertical", + "params": { + "points": [ + "origin", + "l1.start" + ], + "mode": "vertical" + } + }, + { + "command": "sketch.dimension", + "params": { + "entities": [ + "origin", + "l1.start" + ], + "type": "vertical", + "value": "Y0" + } + }, + { + "command": "sketch.dimension", + "params": { + "entities": [ + "l1" + ], + "type": "length", + "value": "L" + } + }, + { + "command": "sketch.dimension", + "params": { + "entities": [ + "l4" + ], + "type": "length", + "value": "20 mm" + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "S", + "distance": "20 mm", + "operation": "new", + "body_name": "Bar" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 100, + 15, + 10 + ] + ], + "thickness": "2 mm", + "direction": "inside", + "body": "Bar" + } + }, + { + "command": "parameters.change", + "params": { + "name": "L", + "expression": "150 mm" + } + }, + { + "command": "parameters.change", + "params": { + "name": "Y0", + "expression": "15 mm" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/2939-offset-face-sphere/expected.json b/tests/kernel-cases/shell/2939-offset-face-sphere/expected.json new file mode 100644 index 000000000..be7c3b9ed --- /dev/null +++ b/tests/kernel-cases/shell/2939-offset-face-sphere/expected.json @@ -0,0 +1,17 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2939" + ], + "what": "Offset Face on a sphere's round face", + "source": "analytic", + "method": "a sphere r10 whose face moves out 2 mm is a sphere r12: V=4/3*pi*12^3, area 4*pi*144, centroid at the origin, one face", + "body_count": 1, + "volume_mm3": 7238.229473870882, + "area_mm2": 1809.5573684677208, + "faces": 1, + "center_of_mass": [ + 0, + 0, + 0 + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/2939-offset-face-sphere/recipe.json b/tests/kernel-cases/shell/2939-offset-face-sphere/recipe.json new file mode 100644 index 000000000..8d9723c0c --- /dev/null +++ b/tests/kernel-cases/shell/2939-offset-face-sphere/recipe.json @@ -0,0 +1,23 @@ +{ + "commands": [ + { + "command": "solid.sphere", + "params": { + "radius": 10 + } + }, + { + "command": "solid.offset_face", + "params": { + "faces": [ + [ + 10, + 0, + 0 + ] + ], + "distance": "2 mm" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3103-shell-tapered-cylinder/expected.json b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/expected.json new file mode 100644 index 000000000..a0cef2321 --- /dev/null +++ b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3103" + ], + "what": "a cone frustum (r20 at the base, r15 at the top, 30 tall) shelled 2 mm open at the top", + "source": "analytic", + "method": "outer V=pi*30/3*(20^2+20*15+15^2). Wall offset 2 normal to the cone: half-angle a=atan(5/30), inner radius r(z)=20-z*tan(a)-2/cos(a), floor at z=2. Cavity frustum height 28 from r(2) to r(30). V=outer-pi*28/3*(ra^2+ra*rb+rb^2)", + "body_count": 1, + "volume_mm3": 8292.991685180048 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3103-shell-tapered-cylinder/recipe.json b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/recipe.json new file mode 100644 index 000000000..1f4cc4602 --- /dev/null +++ b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/recipe.json @@ -0,0 +1,45 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 20 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 30, + "taper": "-9.4623222080 deg", + "operation": "new" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 0, + 0, + 30 + ] + ], + "thickness": 2 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/expected.json b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/expected.json new file mode 100644 index 000000000..6a0bf502f --- /dev/null +++ b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/expected.json @@ -0,0 +1,17 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3283", + "tangency-labs/solidcraft#3650" + ], + "what": "Offset Face on the outer cylindrical wall of a tube (the picker only accepted planar faces)", + "source": "analytic", + "method": "tube R20/r10 x 10 tall; the outer wall moves out 2 mm to R22: V=pi*(22^2-10^2)*10; faces 4 (outer, inner, top, bottom); centroid (0,0,5)", + "body_count": 1, + "volume_mm3": 12063.715789784805, + "faces": 4, + "center_of_mass": [ + 0, + 0, + 5 + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/recipe.json b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/recipe.json new file mode 100644 index 000000000..8c83ee36b --- /dev/null +++ b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/recipe.json @@ -0,0 +1,62 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 20 + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 10 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 10, + "operation": "new", + "profiles": [ + { + "point": [ + 15, + 0 + ] + } + ] + } + }, + { + "command": "solid.offset_face", + "params": { + "faces": [ + [ + 20, + 0, + 5 + ] + ], + "distance": "2 mm" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/expected.json b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/expected.json new file mode 100644 index 000000000..535afc161 --- /dev/null +++ b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3468", + "tangency-labs/solidcraft#3898" + ], + "what": "Offset Face on a boss wall whose base has a 2 mm fillet: the boss grows to r 11 and the fillet follows", + "source": "analytic", + "method": "box 60x40x10 + boss r11 x10 + concave base fillet r2 around the boss. V=24000+pi*11^2*10+2*pi*(R+d)*A with R=11, A=r^2(1-pi/4), d=r^3(5/6-pi/4)/A (Pappus, centroid of the corner region at distance d from the wall); faces: box bottom + 4 sides + top (annulus) + fillet + boss wall + boss cap = 9", + "body_count": 1, + "volume_mm3": 27863.06545197909, + "faces": 9 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/recipe.json b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/recipe.json new file mode 100644 index 000000000..ee9580a48 --- /dev/null +++ b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/recipe.json @@ -0,0 +1,51 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 60, + "width": 40, + "height": 10 + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 10, + "height": 10, + "base": [ + 30, + 20, + 10 + ], + "operation": "join" + } + }, + { + "command": "solid.fillet", + "params": { + "edges": [ + [ + 40, + 20, + 10 + ] + ], + "radius": 2 + } + }, + { + "command": "solid.offset_face", + "params": { + "faces": [ + [ + 40, + 20, + 16 + ] + ], + "distance": 1 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/expected.json b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/expected.json new file mode 100644 index 000000000..1608c1929 --- /dev/null +++ b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3506" + ], + "what": "a box split in two at z=10, then each half shelled 2 mm open on the mating face", + "source": "analytic", + "method": "two 40x30x10 halves; each shelled 2 mm open on the cut face: cavity 36x26x8 (the open side has no wall). V=2*(12000-7488)=9024; two bodies; faces 5+1 ring... each half has outer 5 + open-face ring 1 + cavity 5 = 11, so 22", + "body_count": 2, + "volume_mm3": 9024, + "faces": 22 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/recipe.json b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/recipe.json new file mode 100644 index 000000000..46c78d811 --- /dev/null +++ b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/recipe.json @@ -0,0 +1,59 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 40, + "width": 30, + "height": 20, + "body_name": "Blk" + } + }, + { + "command": "solid.split_body", + "params": { + "body": "Blk", + "plane": { + "origin": [ + 0, + 0, + 10 + ], + "normal": [ + 0, + 0, + 1 + ] + } + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 20, + 15, + 10 + ] + ], + "thickness": 2, + "body": "Blk" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 20, + 15, + 10 + ] + ], + "thickness": 2, + "body": "Blk (1)" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/expected.json b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/expected.json new file mode 100644 index 000000000..e33db687a --- /dev/null +++ b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3576" + ], + "what": "a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces", + "source": "invariants", + "method": "no closed-form volume (tilted rounds). Invariants: the shell succeeds, one closed body, and the record's geometry check holds (every edge of the four inner rounds lies on its faces; the old offset left them up to 0.02 mm off, which other STEP readers reject)", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/recipe.json b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/recipe.json new file mode 100644 index 000000000..e6ad11c23 --- /dev/null +++ b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/recipe.json @@ -0,0 +1,76 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 60, + 40 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 40, + "taper": "-5 deg", + "operation": "new" + } + }, + { + "command": "solid.fillet", + "params": { + "edges": [ + [ + 58.25022672948152, + 38.25022672948152, + 20 + ], + [ + 58.25022672948152, + -38.25022672948152, + 20 + ], + [ + -58.25022672948152, + 38.25022672948152, + 20 + ], + [ + -58.25022672948152, + -38.25022672948152, + 20 + ] + ], + "radius": 4 + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 0, + 0, + 40 + ] + ], + "thickness": 2 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/expected.json b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/expected.json new file mode 100644 index 000000000..759776bb5 --- /dev/null +++ b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3669", + "tangency-labs/solidcraft#2990" + ], + "what": "a loft between a 40 mm and a 20 mm square 80 mm apart, shelled 2 mm open at the small end", + "source": "analytic", + "method": "a ruled loft of two squares is a square pyramid frustum (4 planar walls). Outer V=80/3*(1600+800+400). Walls offset 2 normal to the faces: tan(a)=10/80, half-width w(z)=20-z/8-2/cos(a), floor at z=2, cavity a frustum of height 78 with areas (2w(2))^2 and (2w(80))^2: V=outer-78/3*(A1+sqrt(A1*A2)+A2); faces 4 outer walls + base + top ring + 4 inner walls + floor = 11", + "body_count": 1, + "volume_mm3": 20601.135771593457, + "faces": 11 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/recipe.json b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/recipe.json new file mode 100644 index 000000000..7be1a33f3 --- /dev/null +++ b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/recipe.json @@ -0,0 +1,80 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": 0 + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 20, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": 80 + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 10, + 10 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.loft", + "params": { + "sections": [ + { + "sketch": "Sketch1" + }, + { + "sketch": "Sketch2" + } + ], + "operation": "new" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 0, + 0, + 80 + ] + ], + "thickness": 2, + "tangent_chain": false + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/expected.json b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/expected.json new file mode 100644 index 000000000..31d705000 --- /dev/null +++ b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [ + "tangency-labs/solidcraft#391" + ], + "what": "text debossed 0.6 mm into the flat flange top of a filleted and shelled tapered housing, well away from the curved walls", + "source": "invariants", + "method": "the flange top (z=6) is planar and the text is clear of the walls, so the deboss must succeed and leave one valid closed body; the letter area is font dependent, so only the outcome and validity are graded", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/recipe.json b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/recipe.json new file mode 100644 index 000000000..9ea7e061e --- /dev/null +++ b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/recipe.json @@ -0,0 +1,152 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 57, + 42 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 6, + "body_name": "H" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 45, + 30 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 35, + "taper": "-2 deg", + "operation": "join", + "profiles": [ + { + "point": [ + 0, + 0 + ] + } + ] + } + }, + { + "command": "solid.fillet", + "params": { + "edges": [ + [ + 45, + 30, + 20 + ], + [ + -45, + 30, + 20 + ], + [ + 45, + -30, + 20 + ], + [ + -45, + -30, + 20 + ] + ], + "radius": 6 + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 0, + 0, + 35 + ] + ], + "thickness": 2.5 + } + }, + { + "command": "construct.plane.offset", + "params": { + "base": "XY", + "offset": 6, + "name": "P" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "P", + "name": "T" + } + }, + { + "command": "sketch.text", + "params": { + "text": "AB", + "at": [ + -5, + -39.5 + ], + "height": 4 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.emboss", + "params": { + "sketch": "T", + "depth": 0.6, + "mode": "deboss" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/4009-closed-shell-internal-void/expected.json b/tests/kernel-cases/shell/4009-closed-shell-internal-void/expected.json new file mode 100644 index 000000000..33c5e659f --- /dev/null +++ b/tests/kernel-cases/shell/4009-closed-shell-internal-void/expected.json @@ -0,0 +1,17 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4009" + ], + "what": "shell with no face removed: a closed hollow body with a sealed internal void", + "source": "analytic", + "method": "outer box 40x30x12.5, void = inward offset box 35x25x7.5 (2.5 wall every side). V=15000-6562.5=8437.5; area=outer 2(1200+500+375)=4150 + void 2(875+187.5+262.5)... computed in python; faces 6+6=12; one body with an outer and an inner shell; centroid (20,15,6.25) by symmetry", + "body_count": 1, + "volume_mm3": 8437.5, + "area_mm2": 6800.0, + "faces": 12, + "center_of_mass": [ + 20, + 15, + 6.25 + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/4009-closed-shell-internal-void/recipe.json b/tests/kernel-cases/shell/4009-closed-shell-internal-void/recipe.json new file mode 100644 index 000000000..4040560bd --- /dev/null +++ b/tests/kernel-cases/shell/4009-closed-shell-internal-void/recipe.json @@ -0,0 +1,41 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 40, + 30 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 12.5, + "operation": "new" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [], + "thickness": 2.5 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/expected.json b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/expected.json new file mode 100644 index 000000000..d83c855a3 --- /dev/null +++ b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/expected.json @@ -0,0 +1,15 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4010" + ], + "what": "plate with a through hole shelled 2.5 mm with only the hole's wall removed", + "source": "analytic", + "method": "plate 40x30x12.5 minus hole r5; cavity = inward offset box 35x25x7.5 minus the hole's cylinder (r=5 stays as the wall, height 7.5) open to the hole. V=(15000-pi*25*12.5)-(6562.5-pi*25*7.5); centroid (20,15,6.25) by symmetry", + "body_count": 1, + "volume_mm3": 8044.8009183012755, + "center_of_mass": [ + 20, + 15, + 6.25 + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/recipe.json b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/recipe.json new file mode 100644 index 000000000..4a1836fdb --- /dev/null +++ b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/recipe.json @@ -0,0 +1,65 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 40, + 30 + ] + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 20, + 15 + ], + "radius": 5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 12.5, + "operation": "new", + "profiles": [ + { + "point": [ + 2, + 2 + ] + } + ] + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 25, + 15, + 6.25 + ] + ], + "thickness": 2.5 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/expected.json b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/expected.json new file mode 100644 index 000000000..3ab33fcb4 --- /dev/null +++ b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#566" + ], + "what": "a 8x5 bar swept along a line-arc-line path (quarter circle r30 between two 30 mm legs), shelled 0.5 mm open at its start", + "source": "analytic", + "method": "path length L=30+15*pi+30. The section's centroid is on the path, so by Pappus V_bar=40*L. The cavity is the sweep of the 7x4 section (concentric offsets of the swept walls; the tightest radius 30-3.5 stays positive) from the open start to 0.5 mm short of the end: 28*(L-0.5). V=40*L-28*(L-0.5)", + "body_count": 1, + "volume_mm3": 1299.4866776461627 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/recipe.json b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/recipe.json new file mode 100644 index 000000000..181955f64 --- /dev/null +++ b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/recipe.json @@ -0,0 +1,112 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XZ", + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 30 + ] + ], + "ids": [ + "l1" + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": "l1.end", + "through": [ + 8.787, + 51.213 + ], + "end": [ + 30, + 60 + ], + "id": "a1" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + "a1.end", + [ + 60, + 60 + ] + ], + "ids": [ + "l2" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Section" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 4, + 2.5 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Section", + "path_sketch": "Path", + "path": [ + "l1", + "a1", + "l2" + ] + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 0, + 0, + 0 + ] + ], + "thickness": 0.5 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/expected.json b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/expected.json new file mode 100644 index 000000000..ffbe1034b --- /dev/null +++ b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#745", + "tangency-labs/solidcraft#3893" + ], + "what": "Offset Face on a planar end of a body that has a spline-outlined boss far from the moved face", + "source": "invariants", + "method": "the move is refused today only because the unrelated boss wall is freeform. The operation must succeed and give one valid closed solid; the box end at x=0 moves out by 1 mm (the boss area is a spline integral, so no absolute volume is asserted; the 200 mm3 change is graded in the cut-away variant 745-offset-face-then-cut-boss-away)", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/recipe.json b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/recipe.json new file mode 100644 index 000000000..902cb1b76 --- /dev/null +++ b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/recipe.json @@ -0,0 +1,107 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + 0 + ], + "length": 40, + "width": 20, + "height": 10, + "body_name": "B" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 10 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "S" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 25, + 5 + ], + [ + 35, + 5 + ] + ] + } + }, + { + "command": "sketch.spline.fit_point", + "params": { + "points": [ + [ + 35, + 5 + ], + [ + 37, + 10 + ], + [ + 30, + 15 + ], + [ + 25, + 5 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "S", + "distance": 5, + "operation": "join", + "targets": [ + "B" + ] + } + }, + { + "command": "solid.offset_face", + "params": { + "faces": [ + [ + 0, + 10, + 5 + ] + ], + "distance": "1 mm" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/expected.json b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/expected.json new file mode 100644 index 000000000..ecb617c6d --- /dev/null +++ b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#745", + "tangency-labs/solidcraft#3893" + ], + "what": "the same end offset, then the boss and the box beyond x=24 cut away, which leaves an analytic body", + "source": "analytic", + "method": "after the end moves to x=-1 and the cut removes everything at x>=24 (the spline boss lies at x 25..37.x, inside the cut): a box x -1..24, 20 wide, 10 tall: V=25*20*10=5000; 6 faces", + "body_count": 1, + "volume_mm3": 5000, + "faces": 6 +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/recipe.json b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/recipe.json new file mode 100644 index 000000000..2fc414b95 --- /dev/null +++ b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/recipe.json @@ -0,0 +1,124 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + 0 + ], + "length": 40, + "width": 20, + "height": 10, + "body_name": "B" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 10 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "S" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 25, + 5 + ], + [ + 35, + 5 + ] + ] + } + }, + { + "command": "sketch.spline.fit_point", + "params": { + "points": [ + [ + 35, + 5 + ], + [ + 37, + 10 + ], + [ + 30, + 15 + ], + [ + 25, + 5 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "S", + "distance": 5, + "operation": "join", + "targets": [ + "B" + ] + } + }, + { + "command": "solid.offset_face", + "params": { + "faces": [ + [ + 0, + 10, + 5 + ] + ], + "distance": "1 mm" + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + 24, + -1, + -1 + ], + "length": 30, + "width": 22, + "height": 30, + "operation": "cut", + "targets": [ + "B" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/shell/skipped.json b/tests/kernel-cases/shell/skipped.json new file mode 100644 index 000000000..6d00c2804 --- /dev/null +++ b/tests/kernel-cases/shell/skipped.json @@ -0,0 +1,238 @@ +[ + { + "source": "tangency-labs/solidcraft#142", + "why": "no concrete recipe: a general saddle/four-face corner construction request; its geometry is exercised by case 1494" + }, + { + "source": "tangency-labs/solidcraft#209", + "why": "no geometry given (a screenshot and 'the shell removed everything'); needs the user's design" + }, + { + "source": "tangency-labs/solidcraft#451", + "why": "other area: booleans (cut with a hollow spherical-shell tool)" + }, + { + "source": "tangency-labs/solidcraft#1107", + "why": "other area: booleans (combine of a hollow hub with 9 lofted blades; cavity ownership)" + }, + { + "source": "tangency-labs/solidcraft#1140", + "why": "other area: booleans (cutting a hollow lofted tube in half; a vertex a hair inside an edge)" + }, + { + "source": "tangency-labs/solidcraft#1379", + "why": "needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal, so no wrong result is recorded" + }, + { + "source": "tangency-labs/solidcraft#1969", + "why": "needs the user's design (a sphere split into 6 faces picked by point); a closed hollow sphere is the same operation as case 4009" + }, + { + "source": "tangency-labs/solidcraft#1996", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset of a snap-fit bottom face in an 8-body design)" + }, + { + "source": "tangency-labs/solidcraft#2259", + "why": "other area: booleans (second cut beside an earlier cut through a shelled arched block; mesh edge snapping, seed 61)" + }, + { + "source": "tangency-labs/solidcraft#2421", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#2432", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#2445", + "why": "no body or recipe given (a screenshot only)" + }, + { + "source": "tangency-labs/solidcraft#2452", + "why": "no body or recipe given ('complex body' only)" + }, + { + "source": "tangency-labs/solidcraft#2478", + "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment), no wrong shape" + }, + { + "source": "tangency-labs/solidcraft#2480", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a revolved profile with a freeform face)" + }, + { + "source": "tangency-labs/solidcraft#2493", + "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)" + }, + { + "source": "tangency-labs/solidcraft#2556", + "why": "empty report: no body, pick or error given" + }, + { + "source": "tangency-labs/solidcraft#2557", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 12 on an 8-body design)" + }, + { + "source": "tangency-labs/solidcraft#2745", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 11)" + }, + { + "source": "tangency-labs/solidcraft#2761", + "why": "other area: 2D sketch offset of text outlines (sketch.offset), not a solid operation" + }, + { + "source": "tangency-labs/solidcraft#2795", + "why": "not geometry: UI, the plane editor says 'select a plane first' when editing an offset plane" + }, + { + "source": "tangency-labs/solidcraft#2886", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#2905", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell .125 in on an 8-feature part)" + }, + { + "source": "tangency-labs/solidcraft#2917", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#2928", + "why": "other area: booleans (join of cap-touching prisms with slightly offset cylinder walls)" + }, + { + "source": "tangency-labs/solidcraft#2935", + "why": "empty report: no body, pick or error given" + }, + { + "source": "tangency-labs/solidcraft#2978", + "why": "not geometry: UI, the mouse position is offset from the buttons" + }, + { + "source": "tangency-labs/solidcraft#3000", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell direction both)" + }, + { + "source": "tangency-labs/solidcraft#3031", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#3074", + "why": "needs the user's design (2 bodies, the face pick is not resolved: 'select at least one face'); a pick-resolution defect, not a shape with a known answer" + }, + { + "source": "tangency-labs/solidcraft#3105", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two opposite faces of a box in a 2-body design; the pick missed the faces)" + }, + { + "source": "tangency-labs/solidcraft#3158", + "why": "empty report: no body, pick or error given" + }, + { + "source": "tangency-labs/solidcraft#3159", + "why": "other area: 2D sketch offset of a spline (sketch.offset), not a solid operation" + }, + { + "source": "tangency-labs/solidcraft#3161", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#3163", + "why": "empty report: no body, pick or error given" + }, + { + "source": "tangency-labs/solidcraft#3181", + "why": "empty report: no body, pick or error given" + }, + { + "source": "tangency-labs/solidcraft#3290", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset face on a 13-feature, 2-body design)" + }, + { + "source": "tangency-labs/solidcraft#3341", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#3346", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#3492", + "why": "not geometry: UI, 'select the curves to offset first' (sketch offset with an empty selection)" + }, + { + "source": "tangency-labs/solidcraft#3524", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a 3 mm shell of a body with 41 cylinder faces; the failure is in an internal boolean cut)" + }, + { + "source": "tangency-labs/solidcraft#3567", + "why": "not geometry: construction-plane editing, 'plane offsets nested too deeply'" + }, + { + "source": "tangency-labs/solidcraft#3574", + "why": "other area: 2D sketch offset of a spline (sketch.offset), not a solid operation" + }, + { + "source": "tangency-labs/solidcraft#3585", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred" + }, + { + "source": "tangency-labs/solidcraft#3603", + "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)" + }, + { + "source": "tangency-labs/solidcraft#3621", + "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)" + }, + { + "source": "tangency-labs/solidcraft#3672", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (surface.thicken of a 9-feature body)" + }, + { + "source": "tangency-labs/solidcraft#3721", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (filleted extruded box in a 2-body design)" + }, + { + "source": "tangency-labs/solidcraft#3742", + "why": "other area: 2D sketch offset (sketch.offset, 'collapses an arc'), not a solid operation" + }, + { + "source": "tangency-labs/solidcraft#3774", + "why": "not geometry: a feature request (clearance input on Combine cut)" + }, + { + "source": "tangency-labs/solidcraft#3795", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two faces, 4 mm; only a screenshot of the result)" + }, + { + "source": "tangency-labs/solidcraft#3828", + "why": "other area: 2D sketch offset of splines (sketch.offset), not a solid operation" + }, + { + "source": "tangency-labs/solidcraft#3850", + "why": "other area: booleans (cut whose end face touches a round side leaves an empty shell)" + }, + { + "source": "tangency-labs/solidcraft#3933", + "why": "needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal" + }, + { + "source": "tangency-labs/solidcraft#4029", + "why": "not geometry: construction-plane attachment jumps to another face after editing the offset" + }, + { + "source": "tangency-labs/solidcraft#4052", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (0.1 mm shell of a chamfered and filleted part)" + }, + { + "source": "tangency-labs/solidcraft#4073", + "why": "empty report: no body, pick or error given" + }, + { + "source": "tangency-labs/solidcraft#4120", + "why": "needs the user's design (3-body design; the pick is not resolved: 'select at least one face')" + }, + { + "source": "tangency-labs/solidcraft#4144", + "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (three faces, 2 mm; move larger than the wall)" + } +] \ No newline at end of file