From c1f45cae2e641d49735d1510ee47ead35bfe9337 Mon Sep 17 00:00:00 2001 From: jyviko <2501648+jyviko@users.noreply.github.com> Date: Mon, 2 Nov 2026 17:34:24 -0500 Subject: [PATCH] Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts - assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass 0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2 by the parallel-axis theorem. - occurrence.align: a block's end face onto a base's top face: a quarter turn about y, centre (70,20,20), box (65,15,10)-(75,25,30). - joint.find_limits: a slider between two stops: min -20, max 10 mm. - component.move_features, browser.reparent and component.move_sketches.to_parts: items moved into a turned and moved part keep their world place (volumes, centres and boxes by hand). The mass case assigns a material it creates, so material.create and material.assign leave EXEMPT. PATHS names the new command modules. Co-Authored-By: Claude Opus 5.5 Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ --- tests/kernel-cases/EXEMPT | 2 - tests/kernel-cases/assemblies/PATHS | 6 + .../expected.json | 52 +++++++ .../recipe.json | 105 +++++++++++++++ .../expected.json | 52 +++++++ .../recipe.json | 85 ++++++++++++ .../expected.json | 17 +++ .../recipe.json | 85 ++++++++++++ .../expected.json | 26 ++++ .../recipe.json | 127 ++++++++++++++++++ .../expected.json | 53 ++++++++ .../recipe.json | 98 ++++++++++++++ .../expected.json | 34 +++++ .../recipe.json | 92 +++++++++++++ 14 files changed, 832 insertions(+), 2 deletions(-) create mode 100644 tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/expected.json create mode 100644 tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/recipe.json create mode 100644 tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/expected.json create mode 100644 tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/recipe.json create mode 100644 tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/expected.json create mode 100644 tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/recipe.json create mode 100644 tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/expected.json create mode 100644 tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/recipe.json create mode 100644 tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/expected.json create mode 100644 tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/recipe.json create mode 100644 tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/expected.json create mode 100644 tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/recipe.json diff --git a/tests/kernel-cases/EXEMPT b/tests/kernel-cases/EXEMPT index d61fa82e5..b11151e4e 100644 --- a/tests/kernel-cases/EXEMPT +++ b/tests/kernel-cases/EXEMPT @@ -94,8 +94,6 @@ inspect.zebra display analysis: shading library.apply material and appearance libraries library.export material and appearance libraries library.inspect material and appearance libraries -material.assign materials and their properties -material.create materials and their properties material.delete materials and their properties material.edit materials and their properties material.inspect materials and their properties diff --git a/tests/kernel-cases/assemblies/PATHS b/tests/kernel-cases/assemblies/PATHS index 45bba6bf7..12b1af722 100644 --- a/tests/kernel-cases/assemblies/PATHS +++ b/tests/kernel-cases/assemblies/PATHS @@ -13,17 +13,23 @@ crates/engine/src/cmd/motion_trace.rs crates/engine/src/cmd/contact_sweep.rs # Components and occurrences (their placement in the world is crates/doc/src/eval.rs: shared core). crates/engine/src/cmd/component.rs +crates/engine/src/cmd/component_align.rs crates/engine/src/cmd/component_clone.rs crates/engine/src/cmd/component_clone_assembly.rs crates/engine/src/cmd/component_drag.rs crates/engine/src/cmd/component_extract.rs crates/engine/src/cmd/component_link.rs +crates/engine/src/cmd/component_move_features.rs crates/engine/src/cmd/component_placing.rs crates/engine/src/cmd/component_properties.rs crates/engine/src/cmd/component_reparent.rs +crates/engine/src/cmd/component_reparent_items.rs +crates/engine/src/cmd/component_sketches_to_parts.rs crates/engine/src/cmd/component_transfer.rs # Where occurrences are placed, shown and reported (the exploded view is shown only). crates/engine/src/occurrences.rs +# Mass, centre of mass and inertia per occurrence and rigid group. +crates/engine/src/cmd/mass_properties.rs # Interference and clearance between placed bodies. crates/engine/src/cmd/clearance.rs crates/engine/src/cmd/interference.rs diff --git a/tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/expected.json b/tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/expected.json new file mode 100644 index 000000000..e014bd14f --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/expected.json @@ -0,0 +1,52 @@ +{ + "sources": [], + "what": "browser.reparent of a part's placement and a loose body into a component placed turned and moved", + "source": "analytic", + "method": "Arm: box 40x10x10 from (0,-5,0), centre (20,0,5), V 4000, placed as occurrence 3 (ids count every component, occurrence and feature made); Cube: box 10x10x10 from (0,20,0) in the design, centre (5,25,5), V 1000; Holder placed a quarter turn about z and 100 mm along x. Both move into Holder and keep their world place: Holder's total is V 5000, centre ((4000*20 + 1000*5)/5000, (1000*25)/5000, 5) = (17,5,5), box (0,-5,0)-(40,30,10)", + "body_count": 2, + "volume_mm3": 5000.0, + "center_of_mass": [ + 17.0, + 5.0, + 5.0 + ], + "bbox": { + "min": [ + 0.0, + -5.0, + 0.0 + ], + "max": [ + 40.0, + 30.0, + 10.0 + ] + }, + "results": [ + { + "step": 8, + "json": { + "total": { + "volume_mm3": 5000.0, + "center_of_mass": [ + 17.0, + 5.0, + 5.0 + ], + "bbox": { + "min": [ + 0.0, + -5.0, + 0.0 + ], + "max": [ + 40.0, + 30.0, + 10.0 + ] + } + } + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/recipe.json b/tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/recipe.json new file mode 100644 index 000000000..16915b73e --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-browser-reparent-placement-and-body-into-a-turned-part/recipe.json @@ -0,0 +1,105 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 40, + "width": 10, + "height": 10, + "corner": [ + 0, + -5, + 0 + ], + "operation": "new", + "body_name": "ArmBox" + } + }, + { + "command": "component.create", + "params": { + "name": "Arm", + "parent": "root", + "activate": false, + "grounded": false + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "ArmBox" + ], + "component": "Arm" + } + }, + { + "command": "component.create", + "params": { + "name": "Holder", + "parent": "root", + "activate": false, + "grounded": false + } + }, + { + "command": "occurrence.move", + "params": { + "occurrence": "Holder:1", + "matrix": [ + [ + 0, + -1, + 0, + 100 + ], + [ + 1, + 0, + 0, + 0 + ], + [ + 0, + 0, + 1, + 0 + ] + ] + } + }, + { + "command": "solid.box", + "params": { + "length": 10, + "width": 10, + "height": 10, + "corner": [ + 0, + 20, + 0 + ], + "operation": "new", + "body_name": "Cube" + } + }, + { + "command": "browser.reparent", + "params": { + "occurrences": [ + 3 + ], + "bodies": [ + "Cube" + ], + "component": "Holder" + } + }, + { + "command": "occurrence.properties", + "params": { + "occurrence": "Holder:1" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/expected.json b/tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/expected.json new file mode 100644 index 000000000..1dc63ab9e --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/expected.json @@ -0,0 +1,52 @@ +{ + "sources": [], + "what": "a sketch and its extrude moved from the design into a component placed turned and moved", + "source": "analytic", + "method": "Holder placed a quarter turn about z and 100 mm along x; the rectangle (10,20)-(30,30) on XY extruded 5 mm: 20x10x5 = 1000. Moved into Holder, it keeps its world place (re-expressed in Holder's frame): Holder's total is the block at centre (20,25,2.5), box (10,20,0)-(30,30,5)", + "body_count": 1, + "volume_mm3": 1000.0, + "center_of_mass": [ + 20.0, + 25.0, + 2.5 + ], + "bbox": { + "min": [ + 10.0, + 20.0, + 0.0 + ], + "max": [ + 30.0, + 30.0, + 5.0 + ] + }, + "results": [ + { + "step": 8, + "json": { + "total": { + "volume_mm3": 1000.0, + "center_of_mass": [ + 20.0, + 25.0, + 2.5 + ], + "bbox": { + "min": [ + 10.0, + 20.0, + 0.0 + ], + "max": [ + 30.0, + 30.0, + 5.0 + ] + } + } + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/recipe.json b/tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/recipe.json new file mode 100644 index 000000000..6f99022b1 --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-component-move-features-into-a-turned-part/recipe.json @@ -0,0 +1,85 @@ +{ + "commands": [ + { + "command": "component.create", + "params": { + "name": "Holder", + "parent": "root", + "activate": false, + "grounded": false + } + }, + { + "command": "occurrence.move", + "params": { + "occurrence": "Holder:1", + "matrix": [ + [ + 0, + -1, + 0, + 100 + ], + [ + 1, + 0, + 0, + 0 + ], + [ + 0, + 0, + 1, + 0 + ] + ] + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 10, + 20 + ], + "p1": [ + 30, + 30 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 5, + "operation": "new" + } + }, + { + "command": "component.move_features", + "params": { + "features": [ + "Sketch1", + "Extrude1" + ], + "component": "Holder" + } + }, + { + "command": "occurrence.properties", + "params": { + "occurrence": "Holder:1" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/expected.json b/tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/expected.json new file mode 100644 index 000000000..399e67c7f --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/expected.json @@ -0,0 +1,17 @@ +{ + "sources": [], + "what": "component.move_sketches.to_parts moves a sketch drawn on a part's top face into that part, and the pin built from it stays", + "source": "analytic", + "method": "Bracket: plate 40x30x10 placed 100 mm along x, top face z = 10; a circle r 5 sketched on that face from the design, extruded 8 mm up as a new body: pi*25*8 = 628.3185. The sketch is on an exactly attached face of Bracket's body, so it moves to Bracket (moved 1, stayed 0) and stays where it is on the face: the plate and the pin keep their volumes, 12000 + 628.3185", + "body_count": 2, + "volume_mm3": 12628.318531, + "results": [ + { + "step": 9, + "json": { + "moved": 1, + "stayed": 0 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/recipe.json b/tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/recipe.json new file mode 100644 index 000000000..98f457885 --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-component-move-sketches-to-parts-face-sketch-goes-to-its-part/recipe.json @@ -0,0 +1,85 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 40, + "width": 30, + "height": 10, + "corner": [ + 0, + 0, + 0 + ], + "operation": "new", + "body_name": "Plate" + } + }, + { + "command": "component.create", + "params": { + "name": "Bracket", + "parent": "root", + "activate": false, + "grounded": false + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "Plate" + ], + "component": "Bracket" + } + }, + { + "command": "occurrence.move", + "params": { + "occurrence": "Bracket:1", + "translate": [ + 100, + 0, + 0 + ] + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "face": [ + 120, + 15, + 10 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 8, + "operation": "new" + } + }, + { + "command": "component.move_sketches.to_parts", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/expected.json b/tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/expected.json new file mode 100644 index 000000000..c443a88c9 --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/expected.json @@ -0,0 +1,26 @@ +{ + "sources": [], + "what": "joint.find_limits of a slider whose block runs into a stop at each end", + "source": "analytic", + "method": "Frame (grounded): stops 10x10x10 at x -30..-20 and 50..60; Carriage: box 40x10x10 at x 0..40, same y and z; a slider along +x at value 0. Up, its end x = 40 meets the right stop at x = 50: max 10; down, its end x = 0 meets the left stop at x = -20: min -20. Each side stops at the last value clear of contact, bisected to refine 0.01 mm: within 0.02 mm. Every face is flat, so the mesh gap is exact (gap_tolerance_mm 0)", + "body_count": 3, + "volume_mm3": 6000.0, + "results": [ + { + "step": 9, + "abs_mm": 0.02, + "json": { + "values": [ + { + "index": 0, + "unit": "mm", + "value": 0.0, + "min": -20.0, + "max": 10.0 + } + ], + "gap_tolerance_mm": 0.0 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/recipe.json b/tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/recipe.json new file mode 100644 index 000000000..98f798ad2 --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-joint-find-limits-slider-between-two-stops/recipe.json @@ -0,0 +1,127 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 10, + "width": 10, + "height": 10, + "corner": [ + -30, + -5, + 0 + ], + "operation": "new", + "body_name": "StopL" + } + }, + { + "command": "solid.box", + "params": { + "length": 10, + "width": 10, + "height": 10, + "corner": [ + 50, + -5, + 0 + ], + "operation": "new", + "body_name": "StopR" + } + }, + { + "command": "solid.box", + "params": { + "length": 40, + "width": 10, + "height": 10, + "corner": [ + 0, + -5, + 0 + ], + "operation": "new", + "body_name": "SlideBox" + } + }, + { + "command": "component.create", + "params": { + "name": "Frame", + "parent": "root", + "activate": false, + "grounded": true + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "StopL", + "StopR" + ], + "component": "Frame" + } + }, + { + "command": "component.create", + "params": { + "name": "Carriage", + "parent": "root", + "activate": false, + "grounded": false + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "SlideBox" + ], + "component": "Carriage" + } + }, + { + "command": "joint.create", + "params": { + "type": "slider", + "name": "Slide", + "flip": true, + "a": { + "occurrence": "Frame", + "point": [ + 0, + 0, + 5 + ], + "z": [ + 1, + 0, + 0 + ] + }, + "b": { + "occurrence": "Carriage", + "point": [ + 0, + 0, + 5 + ], + "z": [ + 1, + 0, + 0 + ] + }, + "quiet": true + } + }, + { + "command": "joint.find_limits", + "params": { + "joint": "Slide" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/expected.json b/tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/expected.json new file mode 100644 index 000000000..dfd969983 --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/expected.json @@ -0,0 +1,53 @@ +{ + "sources": [], + "what": "assembly.mass_properties of two boxes in one rigid group", + "source": "analytic", + "method": "material 2 g/cm3; A: box 20x10x10 from the origin, V 2000, m 0.004 kg, centre (10,5,5); B: box 10x10x10 from (30,0,0), V 1000, m 0.002 kg, centre (35,5,5); the rigid group: m = 0.006 kg, centre x = (0.004*10 + 0.002*35)/0.006 = 18.333333, y = z = 5; about it, each box's own m/12 (b^2 + c^2) plus m d^2 along x (parallel axes): Ixx = 0.004/12*200 + 0.002/12*200 = 0.100000, Iyy = Izz = 0.004/12*500 + 0.002/12*200 + 0.004*(10 - x)^2 + 0.002*(35 - x)^2 = 1.033333 kg mm^2, no products of inertia (both boxes symmetric about y = 5 and z = 5). Groups: the design's own (no bodies), then A with B", + "body_count": 2, + "volume_mm3": 3000.0, + "results": [ + { + "step": 10, + "pointer": "/occurrences/2/mass/center_of_mass_mm", + "json": [ + 35.0, + 5.0, + 5.0 + ] + }, + { + "step": 10, + "pointer": "/groups/1/mass", + "json": { + "mass_kg": 0.006, + "center_of_mass_mm": [ + 18.333333, + 5.0, + 5.0 + ] + } + }, + { + "step": 10, + "pointer": "/groups/1/mass/inertia_world_kg_mm2", + "abs_mm": 1e-06, + "json": [ + [ + 0.1, + 0.0, + 0.0 + ], + [ + 0.0, + 1.033333, + 0.0 + ], + [ + 0.0, + 0.0, + 1.033333 + ] + ] + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/recipe.json b/tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/recipe.json new file mode 100644 index 000000000..271b8e8f4 --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-mass-properties-rigid-pair-of-boxes/recipe.json @@ -0,0 +1,98 @@ +{ + "commands": [ + { + "command": "material.create", + "params": { + "name": "Rig Two", + "density_g_cm3": 2.0 + } + }, + { + "command": "solid.box", + "params": { + "length": 20, + "width": 10, + "height": 10, + "corner": [ + 0, + 0, + 0 + ], + "operation": "new", + "body_name": "BlockA" + } + }, + { + "command": "solid.box", + "params": { + "length": 10, + "width": 10, + "height": 10, + "corner": [ + 30, + 0, + 0 + ], + "operation": "new", + "body_name": "BlockB" + } + }, + { + "command": "component.create", + "params": { + "name": "A", + "parent": "root", + "activate": false + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "BlockA" + ], + "component": "A" + } + }, + { + "command": "component.create", + "params": { + "name": "B", + "parent": "root", + "activate": false + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "BlockB" + ], + "component": "B" + } + }, + { + "command": "material.assign", + "params": { + "bodies": [ + "BlockA", + "BlockB" + ], + "material": "Rig Two" + } + }, + { + "command": "joint.rigid_group", + "params": { + "occurrences": [ + "A:1", + "B:1" + ] + } + }, + { + "command": "assembly.mass_properties", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/expected.json b/tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/expected.json new file mode 100644 index 000000000..ce384687b --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/expected.json @@ -0,0 +1,34 @@ +{ + "sources": [], + "what": "occurrence.align of a block's end face onto another part's top face", + "source": "analytic", + "method": "Base: box 40x40x10 from (50,0,0), grounded, top face z = 10; Peg: box 20x10x10 from the origin, end face x = 20 (normal +x) picked at (20,5,5), aligned to the top face at (70,20,10) (normal +z): faces meet facing each other, so +x turns to -z, a quarter turn about +y through (20,5,5), then (20,5,5) moves to (70,20,10). The centre (10,5,5) is (-10,0,0) from the pick, turned (0,0,10): (70,20,20); the 20 mm length stands along z: box (65,15,10)-(75,25,30)", + "body_count": 2, + "volume_mm3": 18000.0, + "results": [ + { + "step": 8, + "json": { + "total": { + "center_of_mass": [ + 70.0, + 20.0, + 20.0 + ], + "bbox": { + "min": [ + 65.0, + 15.0, + 10.0 + ], + "max": [ + 75.0, + 25.0, + 30.0 + ] + } + } + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/recipe.json b/tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/recipe.json new file mode 100644 index 000000000..afeb443ce --- /dev/null +++ b/tests/kernel-cases/assemblies/cov-occurrence-align-side-face-onto-a-top-face/recipe.json @@ -0,0 +1,92 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 40, + "width": 40, + "height": 10, + "corner": [ + 50, + 0, + 0 + ], + "operation": "new", + "body_name": "BaseBox" + } + }, + { + "command": "solid.box", + "params": { + "length": 20, + "width": 10, + "height": 10, + "corner": [ + 0, + 0, + 0 + ], + "operation": "new", + "body_name": "PegBox" + } + }, + { + "command": "component.create", + "params": { + "name": "Base", + "parent": "root", + "activate": false, + "grounded": true + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "BaseBox" + ], + "component": "Base" + } + }, + { + "command": "component.create", + "params": { + "name": "Peg", + "parent": "root", + "activate": false, + "grounded": false + } + }, + { + "command": "component.move_bodies", + "params": { + "bodies": [ + "PegBox" + ], + "component": "Peg" + } + }, + { + "command": "occurrence.align", + "params": { + "occurrence": "Peg:1", + "from_face": [ + 20, + 5, + 5 + ], + "to_face": [ + 70, + 20, + 10 + ] + } + }, + { + "command": "occurrence.properties", + "params": { + "occurrence": "Peg:1" + } + } + ] +} \ No newline at end of file