diff --git a/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/expected.json b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/expected.json new file mode 100644 index 000000000..a689b0c0e --- /dev/null +++ b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/expected.json @@ -0,0 +1,24 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1269" + ], + "what": "a circle of radius 5 on XY swept with orientation parallel along a path rising 20 mm while leaning 20 mm in x (the profile does not turn: a sheared cylinder)", + "source": "analytic", + "method": "with the profile keeping its attitude the body is an oblique circular cylinder: Cavalieri, V = base area * vertical height = pi 25 * 20 = 1570.8. Area = two discs 2 pi 25 + lateral = perimeter of the right section (ellipse a 5, b 5 cos45) * slant 20 sqrt2 = 921.119 total; bbox x -5..25, y +-5, z 0..20; faces: oblique cylinder and two discs.", + "body_count": 1, + "volume_mm3": 1570.7963267948967, + "area_mm2": 921.1191904850396, + "faces": 3, + "bbox": { + "min": [ + -5, + -5, + 0 + ], + "max": [ + 25, + 5, + 20 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/recipe.json b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/recipe.json new file mode 100644 index 000000000..ccfed06f3 --- /dev/null +++ b/tests/kernel-cases/sweeps/1269-sweep-parallel-orientation-oblique-cylinder/recipe.json @@ -0,0 +1,99 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 20, + 20 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1" + ], + "orientation": "parallel", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/expected.json b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/expected.json new file mode 100644 index 000000000..eda569765 --- /dev/null +++ b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1269" + ], + "what": "a 10 x 10 square swept 40 mm along a straight path while turning 90 degrees about the path", + "source": "analytic", + "method": "twisting about the section centre does not change the section area, and the centre moves straight along the path: V = A L = 100 * 40 = 4000. Mid-path the square is turned 45 degrees, so the bbox reaches the corners at 5 sqrt(2) = 7.0711 in x and y.", + "body_count": 1, + "volume_mm3": 4000.0, + "bbox": { + "min": [ + -7.0710678, + -7.0710678, + 0 + ], + "max": [ + 7.0710678, + 7.0710678, + 40 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/recipe.json b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/recipe.json new file mode 100644 index 000000000..9596292bc --- /dev/null +++ b/tests/kernel-cases/sweeps/1269-sweep-twisted-square-ninety-degrees/recipe.json @@ -0,0 +1,102 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 40 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 5, + 5 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1" + ], + "twist": "90 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/expected.json b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/expected.json new file mode 100644 index 000000000..cb6498462 --- /dev/null +++ b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2820" + ], + "what": "a pipe of diameter 6 cut through a 40 x 40 x 20 block along a line leaning 30 degrees from the vertical", + "source": "analytic", + "method": "the cylinder between two parallel planes 20 apart, leaning 30 degrees from their normal, has volume pi r^2 h / cos(30) = pi 9 20 / 0.8660 = 653.0 (it crosses both faces well inside the block); V = 32000 - 653.0. Faces: 4 sides, top and bottom with an elliptical hole each, and the hole wall = 7.", + "body_count": 1, + "volume_mm3": 31347.032228875683, + "faces": 7 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/recipe.json b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/recipe.json new file mode 100644 index 000000000..60eeca8b2 --- /dev/null +++ b/tests/kernel-cases/sweeps/2820-pipe-cut-oblique-hole-through-a-block/recipe.json @@ -0,0 +1,75 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 40, + "width": 40, + "height": 20, + "corner": [ + -20, + -20, + 0 + ], + "body_name": "Block" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -9.999999999999998, + -7.320508075688775 + ], + [ + 9.999999999999998, + 27.320508075688775 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.pipe", + "params": { + "path_sketch": "Path", + "path": [ + "p1" + ], + "diameter": 6, + "operation": "cut" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/expected.json b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/expected.json new file mode 100644 index 000000000..8b512d2b4 --- /dev/null +++ b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2820" + ], + "what": "a hollow pipe (outer diameter 10, wall 2) along a path of two lines joined by a tangent R20 quarter arc", + "source": "analytic", + "method": "a tube of constant ring section along a path of length 30 + (pi/2) 20 + 30 = 91.416: V = pi (5^2 - 3^2) L (Pappus: the section centre follows the path; R 20 > 5). Faces: outer cylinder, torus, cylinder; inner cylinder, torus, cylinder; two annular ends = 8.", + "body_count": 1, + "volume_mm3": 4595.065651620499, + "faces": 8 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/recipe.json b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/recipe.json new file mode 100644 index 000000000..11637c562 --- /dev/null +++ b/tests/kernel-cases/sweeps/2820-pipe-hollow-with-a-wall-along-a-bend/recipe.json @@ -0,0 +1,101 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 30 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 0, + 30 + ], + "through": [ + 5.857864376269049, + 44.14213562373095 + ], + "end": [ + 20, + 50 + ], + "id": "p2" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20, + 50 + ], + [ + 50, + 50 + ] + ], + "infer": false, + "ids": [ + "p3" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.pipe", + "params": { + "path_sketch": "Path", + "path": [ + "p1", + "p2", + "p3" + ], + "diameter": 10, + "wall": 2, + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/expected.json b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/expected.json new file mode 100644 index 000000000..e51433665 --- /dev/null +++ b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3006" + ], + "what": "a circle of radius 3 on a plane at 0.5 of a closed circular path (R 30) swept round it, then a 5 x 5 square on a plane at 0.75 swept round the same path and joined (it did not follow the path)", + "source": "analytic", + "method": "both sections are centred on the path and square to it, so the union is a ring whose section is the union of the disc (r 3) and the square (half side 2.5): A = 25 + 9 pi - A(disc and square), A(disc and square) = integral over x in [-2.5, 2.5] of 2 min(2.5, sqrt(9 - x^2)) = 23.7719; V = A * 2 pi 30 (the same however the square is turned about the path).", + "body_count": 1, + "volume_mm3": 5561.078930711061 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/recipe.json b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/recipe.json new file mode 100644 index 000000000..97300f692 --- /dev/null +++ b/tests/kernel-cases/sweeps/3006-second-sweep-from-a-plane-along-a-closed-path/recipe.json @@ -0,0 +1,134 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 30 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "construct.plane.along_path", + "params": { + "path": { + "sketch": "Path", + "curve": "c1" + }, + "t": 0.5, + "name": "P50" + } + }, + { + "command": "construct.plane.along_path", + "params": { + "path": { + "sketch": "Path", + "curve": "c1" + }, + "t": 0.75, + "name": "P75" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "P50", + "name": "Round" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 3.0 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "P75", + "name": "Square" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 2.5, + 2.5 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Round", + "path_sketch": "Path", + "path": [ + "c1" + ], + "operation": "new", + "body_name": "RoundBar" + } + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Square", + "path_sketch": "Path", + "path": [ + "c1" + ], + "operation": "join", + "targets": [ + "RoundBar" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/expected.json b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/expected.json new file mode 100644 index 000000000..013b58a6e --- /dev/null +++ b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3345" + ], + "what": "a 4 x 3 profile drawn at the middle of the bottom line of a closed 60 x 40 rounded-rectangle path (corner radius 8) and swept round the whole path (walls offset, fillets turned the wrong way)", + "source": "analytic", + "method": "the profile is centred on the path and square to it, so every part of the path keeps it centred: V = A L with A = 12 and L = 2 * 44 + 2 * 24 + 4 (pi/2) 8 = 186.27 (Pappus on the arcs), V = 2235.2. The tube stays within 2 mm of the path sideways and 1.5 mm up: bbox x +-32, y +-22, z +-1.5.", + "body_count": 1, + "volume_mm3": 2235.18578948924, + "bbox": { + "min": [ + -32, + -22, + -1.5 + ], + "max": [ + 32, + 22, + 1.5 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/recipe.json b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/recipe.json new file mode 100644 index 000000000..58db40cd0 --- /dev/null +++ b/tests/kernel-cases/sweeps/3345-sweep-profile-mid-line-round-a-rounded-rectangle/recipe.json @@ -0,0 +1,233 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -22, + -20 + ], + [ + 22, + -20 + ] + ], + "infer": false, + "ids": [ + "l1" + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 22, + -12 + ], + "start": [ + 22, + -20 + ], + "end": [ + 30, + -12 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 30, + -12 + ], + [ + 30, + 12 + ] + ], + "infer": false, + "ids": [ + "l2" + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 22, + 12 + ], + "start": [ + 30, + 12 + ], + "end": [ + 22, + 20 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 22, + 20 + ], + [ + -22, + 20 + ] + ], + "infer": false, + "ids": [ + "l3" + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + -22, + 12 + ], + "start": [ + -22, + 20 + ], + "end": [ + -30, + 12 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -30, + 12 + ], + [ + -30, + -12 + ] + ], + "infer": false, + "ids": [ + "l4" + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + -22, + -12 + ], + "start": [ + -30, + -12 + ], + "end": [ + -22, + -20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + -20.0, + 0.0 + ], + "x_dir": [ + 0, + 1, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Prof" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 2, + 1.5 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Prof", + "path_sketch": "Path", + "path": [ + "l1", + "a1", + "l2", + "a2", + "l3", + "a3", + "l4", + "a4" + ], + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/expected.json b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/expected.json new file mode 100644 index 000000000..3f3e8c6bb --- /dev/null +++ b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3505" + ], + "what": "the inner side wall of the vertical leg of a mitred swept bar extruded outward by 3 mm (the wall is a B-spline net in a plane, \"the selected planar face no longer exists\")", + "source": "analytic", + "method": "bar: 8 x 5 section, path 30 up then 40 across (mitred): V = 40 * 70 = 2800. The inner wall of the vertical leg is the plane x = 4, 5 wide and 26 high (it ends where the mitre meets the horizontal leg underside at z = 26): extruding it 3 mm outward adds 5 * 26 * 3 = 390, a block touching the horizontal leg along z = 26: V = 3190.", + "body_count": 1, + "volume_mm3": 3190 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/recipe.json b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/recipe.json new file mode 100644 index 000000000..c4fdd20c3 --- /dev/null +++ b/tests/kernel-cases/sweeps/3505-extrude-the-flat-wall-of-a-sweep-with-a-corner/recipe.json @@ -0,0 +1,134 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 30 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 30 + ], + [ + 40, + 30 + ] + ], + "infer": false, + "ids": [ + "p2" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 4, + 2.5 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1", + "p2" + ], + "operation": "new", + "body_name": "Bar" + } + }, + { + "command": "solid.extrude", + "params": { + "face": [ + 4, + 0, + 15 + ], + "distance": 3, + "operation": "join" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/expected.json b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/expected.json new file mode 100644 index 000000000..e034ea62a --- /dev/null +++ b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/expected.json @@ -0,0 +1,24 @@ +{ + "sources": [ + "tangency-labs/solidcraft#771", + "tangency-labs/solidcraft#1269" + ], + "what": "a circle of radius 5 swept 30 mm along a straight path with end scale 2", + "source": "analytic", + "method": "the section scales linearly with the path, so the solid is a cone frustum from r 5 to r 10 over 30 mm: V = h/3 (A1 + A2 + sqrt(A1 A2)) = 10 pi (25 + 100 + 50) = 5497.8; faces: cone and two disc caps.", + "body_count": 1, + "volume_mm3": 5497.787143782138, + "faces": 3, + "bbox": { + "min": [ + -10, + -10, + 0 + ], + "max": [ + 10, + 10, + 30 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/recipe.json b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/recipe.json new file mode 100644 index 000000000..924a5c907 --- /dev/null +++ b/tests/kernel-cases/sweeps/771-sweep-end-scale-cone-frustum/recipe.json @@ -0,0 +1,99 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 30 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1" + ], + "scale": 2, + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/expected.json b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/expected.json new file mode 100644 index 000000000..b68a9d769 --- /dev/null +++ b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/expected.json @@ -0,0 +1,23 @@ +{ + "sources": [ + "tangency-labs/solidcraft#771", + "tangency-labs/solidcraft#1806" + ], + "what": "a circle of radius 5 swept 20 mm up a straight path with one guide rail from its point (5,0,0) to (10,0,20)", + "source": "analytic", + "method": "the profile is scaled by the rail distance from the path, 5 at the start and 10 at the end, linearly: a cone frustum, V = h/3 (A1 + A2 + sqrt(A1 A2)) = 20/3 pi (25 + 100 + 50) = 3665.2.", + "body_count": 1, + "volume_mm3": 3665.191429188092, + "bbox": { + "min": [ + -10, + -10, + 0 + ], + "max": [ + 10, + 10, + 20 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/recipe.json b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/recipe.json new file mode 100644 index 000000000..2a363c4c3 --- /dev/null +++ b/tests/kernel-cases/sweeps/771-sweep-one-guide-rail-cone-frustum/recipe.json @@ -0,0 +1,152 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 20 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Rail" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 5, + 0 + ], + [ + 10, + 20 + ] + ], + "infer": false, + "ids": [ + "r1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1" + ], + "rails": [ + { + "sketch": "Rail", + "curves": [ + "r1" + ] + } + ], + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/expected.json b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/expected.json new file mode 100644 index 000000000..e9eeebead --- /dev/null +++ b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/expected.json @@ -0,0 +1,23 @@ +{ + "sources": [ + "tangency-labs/solidcraft#771", + "tangency-labs/solidcraft#1806" + ], + "what": "a circle of radius 5 swept 20 mm up a straight path between two guide rails from (5,0,0) to (10,0,20) and from (-5,0,0) to (-10,0,20)", + "source": "analytic", + "method": "the profile follows the rails (its points where they start stay on both) and is sized by their distance, 10 at the start and 20 at the end: the same cone frustum, V = 20/3 pi (25 + 100 + 50) = 3665.2.", + "body_count": 1, + "volume_mm3": 3665.191429188092, + "bbox": { + "min": [ + -10, + -10, + 0 + ], + "max": [ + 10, + 10, + 20 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/recipe.json b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/recipe.json new file mode 100644 index 000000000..d62779299 --- /dev/null +++ b/tests/kernel-cases/sweeps/771-sweep-two-guide-rails-cone-frustum/recipe.json @@ -0,0 +1,177 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 20 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Rail" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 5, + 0 + ], + [ + 10, + 20 + ] + ], + "infer": false, + "ids": [ + "r1" + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -5, + 0 + ], + [ + -10, + 20 + ] + ], + "infer": false, + "ids": [ + "r2" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1" + ], + "rails": [ + { + "sketch": "Rail", + "curves": [ + "r1" + ] + }, + { + "sketch": "Rail", + "curves": [ + "r2" + ] + } + ], + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/expected.json b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/expected.json new file mode 100644 index 000000000..d1e68055e --- /dev/null +++ b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#96" + ], + "what": "an 8 x 5 rectangle swept along a path of a 30 mm vertical line and a 40 mm horizontal line meeting at a sharp corner (walls mitred)", + "source": "analytic", + "method": "in the bend plane the mitred joint keeps the area w (l1 + l2): the outer side gains exactly what the inner side loses, so V = A (l1 + l2) = 40 * 70 = 2800. bbox: x -4..40, y +-2.5, z 0..34 (the mitred outer corner reaches 30 + 4).", + "body_count": 1, + "volume_mm3": 2800.0, + "bbox": { + "min": [ + -4, + -2.5, + 0 + ], + "max": [ + 40, + 2.5, + 34 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/recipe.json b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/recipe.json new file mode 100644 index 000000000..1d03a3211 --- /dev/null +++ b/tests/kernel-cases/sweeps/96-sweep-rectangle-round-a-mitred-corner/recipe.json @@ -0,0 +1,122 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 30 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 30 + ], + [ + 40, + 30 + ] + ], + "infer": false, + "ids": [ + "p2" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 4, + 2.5 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1", + "p2" + ], + "operation": "new", + "body_name": "Bar" + } + } + ] +} \ No newline at end of file