Thread: the chamfered tip reaches ISO 724's external minor diameter

ISO 4753's chamfered end bounds the end's diameter by the minor diameter. The default took the
modelled root (the basic d1) for it, so the cone's small circle lay on the root cylinder and
the chamfer ring pinched to nothing wherever the groove reached the end. The default is now
the external minor diameter d3 = d - 1.226869 P of ISO 724, below d1: the cone crosses the
root, each end is a whole disk of d3 inside a whole conical ring. ISO 4753 is for ISO metric
threads; the other forms, whose root is already their design minor, give chamfer_depth.

Ladder 06/017's analytic volume follows (1945.354522563); its golden entry re-measured.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
jyvikoandClaude Opus 5.5 authored and Irakli Kourtis committed 2026-10-27 13:02:32 -04:00
1 parent d1a8f0417f
commit a30a85698f
6 files changed
+64 -21

No files matched your search

+13 -4
View File
@@ -83,9 +83,13 @@ radially.
**Tip** (`tip: chamfer`, ISO 4753's chamfered end): at each free end of a modelled external
thread, after the groove, the material outside a cone `chamfer_angle` to the axis (45°) reaching
d_f = d − 2 `chamfer_depth` at the end (default the external minor diameter, the largest the
standard allows) is cut, the last teeth tapering into it. An internal thread takes the hole's
countersink instead.
d_f = d − 2 `chamfer_depth` at the end is cut, the last teeth tapering into it. ISO 4753 bounds
d_f by the minor diameter; the default is that bound, the external minor diameter d3 = d −
1.226869 P of ISO 724 (8.160 for M10), which lies below the modelled basic root d1. The cone
therefore crosses the root and leaves the end a whole disk of d3 inside a whole conical ring; a
cone ending on the root itself would pinch to nothing wherever the groove reaches the end. ISO
4753 is for ISO metric threads, so the other forms give `chamfer_depth`. An internal thread takes
the hole's countersink instead.
## Sources
@@ -104,4 +108,9 @@ countersink instead.
- ASME B1.9 (buttress inch): 7°/45°, basic height of engagement 0.6 P; the flat follows from the
fundamental triangle H = P / (tan 7° + tan 45°) = 0.89064 P truncated equally at crest and root.
- ISO 3508 (thread runouts) and ISO 4753 (ends of parts with external threads) for the runout and
the chamfered tip.
the chamfered tip. ISO 4753:2011, figure 1 b) (chamfered end CH; the public preview at
<https://cdn.standards.iteh.ai/samples/55928/38ddde12863b4c2db35dc929fd502a4d/ISO-4753-2011.pdf>):
the end's diameter "Maximum diameter at the minor thread diameter", the angle ≤ 50°, the
incomplete thread u ≤ 2 P.
- ISO 724 (external minor diameter d3 = d1 − H/6 = d − 1.226869 P, M10x1.5: 8.16), as given at
<https://www.valvias.com/miscellanea-metric-thread-din-13.php>.