diff --git a/docs/kernel-ladder.md b/docs/kernel-ladder.md index b1e48ec81..8aa48e3a0 100644 --- a/docs/kernel-ladder.md +++ b/docs/kernel-ladder.md @@ -13,7 +13,7 @@ The **frontier** is the first case of a tier, in ladder order, that fails (fail, | 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 10 | 10 pass | – | | 04-spline-profiles | spline profiles, sweeps and lofts | 12 | 12 pass | – | | 05-holes-and-taps | holes and tapped holes | 13 | 13 pass | – | -| 06-threads | modelled threads | 10 | 8 pass, 2 unsupported | – | +| 06-threads | modelled threads | 17 | 17 pass | – | | 07-fillets | constant, variable and corner fillets | 17 | 1 fail, 14 pass, 2 unsupported | 016-corner-three-sequential-r5-r3-r7 | | 08-chamfers | chamfers | 8 | 8 pass | – | | 09-shells-and-offsets | shells and offsets | 15 | 15 pass | – | @@ -28,131 +28,138 @@ Times are the commands' own, in seconds, from the case's process; **golden** is | Case | What | Answer | Result | s | golden s | changes | |---|---|---|---|---|---|---| -| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.002 | 0.002 | | -| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.005 | 0.005 | | -| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.014 | 0.014 | | +| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.003 | 0.003 | | +| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.003 | 0.003 | | | ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.016 | 0.016 | | -| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.028 | 0.028 | | -| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.463 | 0.463 | | +| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.017 | 0.017 | | +| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.025 | 0.025 | | +| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.496 | 0.496 | | | ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.006 | 0.006 | | -| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.007 | 0.007 | | -| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.011 | 0.011 | | +| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.006 | 0.006 | | +| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.007 | 0.007 | | | ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.012 | 0.012 | | | ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.012 | 0.012 | | -| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.013 | 0.013 | | +| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.013 | 0.013 | | | ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.013 | 0.013 | | | ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.013 | 0.013 | | -| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.013 | 0.013 | | -| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.016 | 0.016 | | +| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.014 | 0.014 | | +| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.015 | 0.015 | | +| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.015 | 0.015 | | | ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.016 | 0.016 | | -| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.019 | 0.019 | | +| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.018 | 0.018 | | | ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.023 | 0.023 | | -| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.026 | 0.026 | | -| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.026 | 0.026 | | -| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.030 | 0.030 | | -| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.035 | 0.035 | | +| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.023 | 0.023 | | +| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.027 | 0.027 | | +| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.027 | 0.027 | | +| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.028 | 0.028 | | | ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.035 | 0.035 | | -| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.039 | 0.039 | | -| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.043 | 0.043 | | +| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.042 | 0.042 | | | ladder/02-booleans/022-cylinder-grazing-a-hole-edge | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | 0.060 | 0.060 | | | ladder/02-booleans/021-holes-touching-at-a-point | two through holes r5 whose circles touch at one point (30, 20) | analytic | pass | 0.067 | 0.067 | | -| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.108 | 0.108 | | -| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.176 | 0.176 | | -| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.036 | 1.036 | | +| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.111 | 0.111 | | +| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.185 | 0.185 | | +| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.053 | 1.053 | | +| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.007 | 0.007 | | +| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.009 | 0.009 | | | ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.009 | 0.009 | | -| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.012 | 0.012 | | -| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.014 | 0.014 | | -| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.016 | 0.016 | | +| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.016 | 0.016 | | +| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.028 | 0.028 | | | ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.033 | 0.033 | | | ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.034 | 0.034 | | -| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.039 | 0.039 | | -| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.065 | 0.065 | | -| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.072 | 0.072 | | -| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.074 | 0.074 | | -| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.008 | 0.008 | | -| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.009 | 0.009 | | -| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.014 | 0.014 | | +| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.060 | 0.060 | | +| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.066 | 0.066 | | +| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.079 | 0.079 | | +| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.010 | 0.010 | | +| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.015 | 0.015 | | +| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.021 | 0.021 | | | ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | invariants | pass | 0.029 | 0.029 | | -| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.031 | 0.031 | | -| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.037 | 0.037 | | +| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.035 | 0.035 | | | ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | invariants | pass | 0.039 | 0.039 | | -| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.079 | 0.079 | | -| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.081 | 0.081 | | -| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.095 | 0.095 | | -| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.499 | 0.499 | | -| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.130 | 1.130 | | -| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.017 | 0.017 | | -| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.018 | 0.018 | | +| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.043 | 0.043 | | +| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.081 | 0.081 | | +| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.086 | 0.086 | | +| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.106 | 0.106 | | +| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.475 | 0.475 | | +| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.126 | 1.126 | | +| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.018 | 0.018 | | +| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.018 | 0.018 | | +| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.019 | 0.019 | | | ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | pass | 0.019 | 0.019 | | | ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.023 | 0.023 | | -| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.024 | 0.024 | | +| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.023 | 0.023 | | | ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.025 | 0.025 | | -| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.030 | 0.030 | | | ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.049 | 0.049 | | +| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.053 | 0.053 | | +| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.061 | 0.061 | | | ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.061 | 0.061 | | -| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.064 | 0.064 | | -| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.068 | 0.068 | | -| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.072 | 0.072 | | -| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.235 | 0.235 | | -| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm: it stops square in the middle of the face | invariants | pass | 0.622 | 0.622 | | -| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.660 | 0.660 | | -| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 0.726 | 0.726 | | -| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder | invariants | pass | 1.219 | 1.219 | | -| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet | invariants | pass | 1.231 | 1.231 | | -| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.337 | 1.337 | | -| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.390 | 1.390 | | -| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.362 | 2.362 | | -| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) | invariants | not supported yet: solid.thread has no start count: multi-start threads | – | – | | -| ladder/06-threads/009-thread-runout-length | an M10 thread that vanishes over a 2-pitch runout before a shoulder | invariants | not supported yet: solid.thread has no runout (vanishing thread) length | – | – | | -| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.003 | 0.003 | | +| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.082 | 0.082 | | +| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.222 | 0.222 | | +| ladder/06-threads/012-external-acme-3-4-6 | a modelled 3/4-6 ACME thread (ASME B1.5, general purpose) on a 3/4 in shaft, six turns | analytic | pass | 0.579 | 0.579 | | +| ladder/06-threads/013-external-s20x4 | a modelled metric buttress S20x4 thread (DIN 513, 3/30 deg) on a d20 shaft, six turns | analytic | pass | 0.597 | 0.597 | | +| ladder/06-threads/011-external-tr20x4 | a modelled trapezoidal Tr20x4 thread (ISO 2904) on a d20 shaft, six turns | analytic | pass | 0.612 | 0.612 | | +| ladder/06-threads/015-internal-tr20x4-nut | a modelled internal Tr20x4 thread in a d16 (D1 = d - P) bore through a 40x40x24 block | analytic | pass | 0.615 | 0.615 | | +| ladder/06-threads/014-external-buttress-asme-1.5-8 | a modelled 1.5-8 buttress thread (ASME B1.9 basic profile, 7/45 deg) on a 1.5 in shaft, six turns | analytic | pass | 0.673 | 0.673 | | +| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.701 | 0.701 | | +| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm from the top end (`from`): it stops square in the middle of the face | analytic | pass | 0.827 | 0.827 | | +| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 1.107 | 1.107 | | +| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet: it stops clear of the fillet | analytic | pass | 1.364 | 1.364 | | +| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder: it stops clear of it, the collar whole | analytic | pass | 1.367 | 1.367 | | +| ladder/06-threads/009-thread-runout-length | 004's M10 thread run from the free top end, vanishing over a 3 mm (2 P) runout before the d16 shoulder | analytic | pass | 1.432 | 1.432 | | +| ladder/06-threads/016-external-m10-left-hand | 001's modelled M10 thread, left-handed: the same volume, turning the other way | analytic | pass | 1.564 | 1.564 | | +| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.637 | 1.637 | | +| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.652 | 1.652 | | +| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.412 | 2.412 | | +| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) over a d10 x 30 cylinder | analytic | pass | 3.155 | 3.155 | | +| ladder/06-threads/017-external-m10-chamfered-tip | 001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the minor diameter, cut after the groove | analytic | pass | 3.245 | 3.245 | | +| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.005 | 0.005 | | +| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.007 | 0.007 | | | ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.007 | 0.007 | | | ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.009 | 0.009 | | | ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | invariants | pass | 0.010 | 0.010 | | | ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.011 | 0.011 | | +| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.011 | 0.011 | | | ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.012 | 0.012 | | -| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.012 | 0.012 | | | ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.014 | 0.014 | | -| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | 0.018 | | -| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.019 | 0.019 | | -| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.020 | 0.020 | | +| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.019 | 0.019 | | | ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them | invariants | **FAIL**: step 4 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) | 0.026 | 0.026 | | -| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.030 | 0.030 | | -| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | | +| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.029 | 0.029 | | +| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.031 | 0.031 | | +| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.039 | 0.039 | | | ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.044 | 0.044 | | -| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.389 | 0.389 | | +| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.405 | 0.405 | | | ladder/07-fillets/013-corner-setback | three r5 rounds at a corner with setbacks of 8 mm along each edge | invariants | not supported yet: solid.fillet has no corner setback distances | – | – | | +| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.006 | 0.006 | | | ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.006 | 0.006 | | -| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.007 | 0.007 | | | ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.008 | 0.008 | | -| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.010 | 0.010 | | | ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.012 | 0.012 | | +| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.018 | 0.018 | | | ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | invariants | pass | 0.027 | 0.027 | | -| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | | -| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.519 | 0.519 | | -| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.009 | 0.009 | | -| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.009 | 0.009 | | -| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.009 | 0.009 | | +| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.039 | 0.039 | | +| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.514 | 0.514 | | +| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.016 | 0.016 | | +| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.017 | 0.017 | | +| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.017 | 0.017 | | | ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.017 | 0.017 | | -| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.017 | 0.017 | | +| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.017 | 0.017 | | | ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.031 | 0.031 | | | ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.040 | 0.040 | | -| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.042 | 0.042 | | -| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.054 | 0.054 | | -| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.090 | 0.090 | | -| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.090 | 0.090 | | -| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.098 | 0.098 | | -| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.123 | 0.123 | | -| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.692 | 0.692 | | -| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.868 | 0.868 | | +| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.043 | 0.043 | | +| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.066 | 0.066 | | +| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.094 | 0.094 | | +| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.095 | 0.095 | | +| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.101 | 0.101 | | +| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.132 | 0.132 | | +| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.685 | 0.685 | | +| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.853 | 0.853 | | | ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.017 | 0.017 | | -| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.036 | 0.036 | | -| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.039 | 0.039 | | -| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.155 | 0.155 | | -| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.244 | 0.244 | | -| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.353 | 0.353 | | -| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.670 | 0.670 | | -| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.469 | 1.469 | | -| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.071 | 0.071 | | -| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.503 | 0.503 | | -| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.769 | 1.769 | | -| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.096 | 2.096 | | +| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.035 | 0.035 | | +| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.050 | 0.050 | | +| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.153 | 0.153 | | +| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.236 | 0.236 | | +| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.346 | 0.346 | | +| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.678 | 0.678 | | +| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.482 | 1.482 | | +| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.059 | 0.059 | | +| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.536 | 0.536 | | +| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.665 | 1.665 | | +| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.150 | 2.150 | | diff --git a/tests/kernel-cases/ladder/golden.json b/tests/kernel-cases/ladder/golden.json index a1e17675d..1d66b19ec 100644 --- a/tests/kernel-cases/ladder/golden.json +++ b/tests/kernel-cases/ladder/golden.json @@ -9,7 +9,7 @@ "vertices": 8, "volume_mm3": 48000.0 }, - "seconds": 0.002421083, + "seconds": 0.002505192, "status": "pass" }, "ladder/01-primitives/002-cylinder": { @@ -21,7 +21,7 @@ "vertices": 2, "volume_mm3": 9424.777353639352 }, - "seconds": 0.028312155, + "seconds": 0.017216648, "status": "pass" }, "ladder/01-primitives/003-cone": { @@ -33,7 +33,7 @@ "vertices": 3, "volume_mm3": 3141.59242697122 }, - "seconds": 0.013765259, + "seconds": 0.025275155, "status": "pass" }, "ladder/01-primitives/004-frustum": { @@ -45,7 +45,7 @@ "vertices": 2, "volume_mm3": 3665.191341582638 }, - "seconds": 0.016146822, + "seconds": 0.016169941, "status": "pass" }, "ladder/01-primitives/005-sphere": { @@ -57,7 +57,7 @@ "vertices": 2, "volume_mm3": 4188.791896913583 }, - "seconds": 0.004701028, + "seconds": 0.002811785, "status": "pass" }, "ladder/01-primitives/006-torus": { @@ -69,7 +69,7 @@ "vertices": 1, "volume_mm3": 9869.61010099745 }, - "seconds": 0.46266828, + "seconds": 0.495867662, "status": "pass" }, "ladder/02-booleans/001-coincident-face-join": { @@ -81,7 +81,7 @@ "vertices": 8, "volume_mm3": 72000.0 }, - "seconds": 0.011548066, + "seconds": 0.011773846, "status": "pass" }, "ladder/02-booleans/002-coplanar-overlap-join": { @@ -93,7 +93,7 @@ "vertices": 16, "volume_mm3": 84000.0 }, - "seconds": 0.013128601, + "seconds": 0.013509612, "status": "pass" }, "ladder/02-booleans/003-pocket-flush-with-top": { @@ -105,7 +105,7 @@ "vertices": 16, "volume_mm3": 44000.0 }, - "seconds": 0.012931752, + "seconds": 0.012970154, "status": "pass" }, "ladder/02-booleans/004-edge-on-edge-no-overlap": { @@ -117,7 +117,7 @@ "vertices": 8, "volume_mm3": 48000.0 }, - "seconds": 0.00644086, + "seconds": 0.006172788, "status": "pass" }, "ladder/02-booleans/005-vertex-on-face-no-overlap": { @@ -129,7 +129,7 @@ "vertices": 8, "volume_mm3": 48000.0 }, - "seconds": 0.034711702, + "seconds": 0.023457276, "status": "pass" }, "ladder/02-booleans/006-tangent-along-line-no-overlap": { @@ -141,7 +141,7 @@ "vertices": 8, "volume_mm3": 48000.0 }, - "seconds": 0.026354658, + "seconds": 0.015170114, "status": "pass" }, "ladder/02-booleans/007-near-tangent-gap-1e-3": { @@ -153,7 +153,7 @@ "vertices": 8, "volume_mm3": 48000.0 }, - "seconds": 0.018841682, + "seconds": 0.015431762, "status": "pass" }, "ladder/02-booleans/008-near-tangent-gap-1e-6": { @@ -165,7 +165,7 @@ "vertices": 8, "volume_mm3": 48000.0 }, - "seconds": 0.015557891, + "seconds": 0.028062604, "status": "pass" }, "ladder/02-booleans/009-near-tangent-overlap-1e-3": { @@ -177,7 +177,7 @@ "vertices": 12, "volume_mm3": 47999.9886864612 }, - "seconds": 0.029918273, + "seconds": 0.017688185, "status": "pass" }, "ladder/02-booleans/010-near-tangent-overlap-1e-6": { @@ -189,7 +189,7 @@ "vertices": 8, "volume_mm3": 48000.0 }, - "seconds": 0.016262407, + "seconds": 0.016272389, "status": "pass" }, "ladder/02-booleans/011-tangent-along-circle-through-hole": { @@ -201,7 +201,7 @@ "vertices": 10, "volume_mm3": 41716.81450698026 }, - "seconds": 0.034853735, + "seconds": 0.035462532, "status": "pass" }, "ladder/02-booleans/012-tangent-along-circle-bowl": { @@ -213,7 +213,7 @@ "vertices": 12, "volume_mm3": 42764.01195654861 }, - "seconds": 0.043282076, + "seconds": 0.04172308, "status": "pass" }, "ladder/02-booleans/013-cut-across-cylinder-seam": { @@ -225,7 +225,7 @@ "vertices": 8, "volume_mm3": 5888.550569284607 }, - "seconds": 0.038788456, + "seconds": 0.027133097, "status": "pass" }, "ladder/02-booleans/014-cut-through-sphere-pole": { @@ -237,7 +237,7 @@ "vertices": 10, "volume_mm3": 4110.944533826848 }, - "seconds": 0.011872004, + "seconds": 0.012077223, "status": "pass" }, "ladder/02-booleans/015-knife-edge-wedge-cut": { @@ -249,7 +249,7 @@ "vertices": 6, "volume_mm3": 24000.000000000007 }, - "seconds": 0.011355745, + "seconds": 0.006479541, "status": "pass" }, "ladder/02-booleans/016-v-groove-pinches-bottom-to-line": { @@ -261,7 +261,7 @@ "vertices": 16, "volume_mm3": 38400.000000000015 }, - "seconds": 0.007019822, + "seconds": 0.012742346, "status": "pass" }, "ladder/02-booleans/017-cylinder-tangent-top-and-bottom": { @@ -273,7 +273,7 @@ "vertices": 16, "volume_mm3": 29150.438046445848 }, - "seconds": 0.023206421, + "seconds": 0.023333212, "status": "pass" }, "ladder/02-booleans/018-hole-tangent-to-side-face": { @@ -285,7 +285,7 @@ "vertices": 10, "volume_mm3": 41716.81209239218 }, - "seconds": 0.026489907, + "seconds": 0.026519927, "status": "pass" }, "ladder/02-booleans/019-notch-flush-with-end-face": { @@ -297,7 +297,7 @@ "vertices": 16, "volume_mm3": 32000.000000000015 }, - "seconds": 0.012994217, + "seconds": 0.013007835, "status": "pass" }, "ladder/02-booleans/020-part-back-wall": { @@ -309,7 +309,7 @@ "vertices": 12, "volume_mm3": 57000.0 }, - "seconds": 0.012916937, + "seconds": 0.006816518, "status": "pass" }, "ladder/02-booleans/021-holes-touching-at-a-point": { @@ -321,7 +321,7 @@ "vertices": 10, "volume_mm3": 44858.40494270982 }, - "seconds": 0.066898018, + "seconds": 0.066637833, "status": "pass" }, "ladder/02-booleans/022-cylinder-grazing-a-hole-edge": { @@ -333,7 +333,7 @@ "vertices": 16, "volume_mm3": 700.1694600993085 }, - "seconds": 0.059928004, + "seconds": 0.060029028, "status": "pass" }, "ladder/02-booleans/023-lips-1e-4-off-the-walls-joined": { @@ -345,7 +345,7 @@ "vertices": 34, "volume_mm3": 769.4693261952389 }, - "seconds": 0.107631267, + "seconds": 0.111073418, "status": "pass" }, "ladder/02-booleans/024-wall-halves-merged-into-a-flange": { @@ -357,7 +357,7 @@ "vertices": 6, "volume_mm3": 37875.03682260403 }, - "seconds": 0.175934284, + "seconds": 0.185255547, "status": "pass" }, "ladder/02-booleans/025-flush-chord-layers-joined": { @@ -369,7 +369,7 @@ "vertices": 52, "volume_mm3": 24340.93465191528 }, - "seconds": 1.036233441, + "seconds": 1.053367753, "status": "pass" }, "ladder/03-analytic-profiles/001-extrude-rect-with-arc-end": { @@ -381,7 +381,7 @@ "vertices": 8, "volume_mm3": 60566.37574264513 }, - "seconds": 0.013805836, + "seconds": 0.007418136, "status": "pass" }, "ladder/03-analytic-profiles/002-extrude-annulus": { @@ -393,7 +393,7 @@ "vertices": 4, "volume_mm3": 14137.165496409769 }, - "seconds": 0.032683758, + "seconds": 0.032865659, "status": "pass" }, "ladder/03-analytic-profiles/003-extrude-tapered-circle": { @@ -405,7 +405,7 @@ "vertices": 2, "volume_mm3": 5247.894417424099 }, - "seconds": 0.039307211, + "seconds": 0.027602906, "status": "pass" }, "ladder/03-analytic-profiles/004-revolve-full-off-axis": { @@ -417,7 +417,7 @@ "vertices": 4, "volume_mm3": 28274.33099281954 }, - "seconds": 0.034131125, + "seconds": 0.034186176, "status": "pass" }, "ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere": { @@ -429,7 +429,7 @@ "vertices": 2, "volume_mm3": 16755.16137194915 }, - "seconds": 0.072184153, + "seconds": 0.059967396, "status": "pass" }, "ladder/03-analytic-profiles/006-revolve-partial-90": { @@ -441,7 +441,7 @@ "vertices": 8, "volume_mm3": 2356.1929112075295 }, - "seconds": 0.008946295, + "seconds": 0.009172237, "status": "pass" }, "ladder/03-analytic-profiles/007-revolve-180-touching-axis": { @@ -453,7 +453,7 @@ "vertices": 4, "volume_mm3": 7068.582941859537 }, - "seconds": 0.015959589, + "seconds": 0.008977837, "status": "pass" }, "ladder/03-analytic-profiles/008-extrude-slot": { @@ -465,7 +465,7 @@ "vertices": 8, "volume_mm3": 11141.594404248584 }, - "seconds": 0.011646259, + "seconds": 0.015923988, "status": "pass" }, "ladder/03-analytic-profiles/009-part-boss-and-slot": { @@ -477,7 +477,7 @@ "vertices": 22, "volume_mm3": 55605.309277598055 }, - "seconds": 0.065359132, + "seconds": 0.065602694, "status": "pass" }, "ladder/03-analytic-profiles/010-revolve-horn-torus-270": { @@ -489,7 +489,7 @@ "vertices": 4, "volume_mm3": 28932.185072957283 }, - "seconds": 0.07428757, + "seconds": 0.078664992, "status": "pass" }, "ladder/04-spline-profiles/001-extrude-bezier-arch": { @@ -501,7 +501,7 @@ "vertices": 8, "volume_mm3": 8200.0 }, - "seconds": 0.008144467, + "seconds": 0.014847761, "status": "pass" }, "ladder/04-spline-profiles/002-revolve-bezier-profile": { @@ -513,7 +513,7 @@ "vertices": 2, "volume_mm3": 34131.153548347604 }, - "seconds": 0.080633805, + "seconds": 0.086235049, "status": "pass" }, "ladder/04-spline-profiles/003-pipe-along-bezier": { @@ -525,7 +525,7 @@ "vertices": 2, "volume_mm3": 580.8255293341258 }, - "seconds": 0.079442777, + "seconds": 0.080747239, "status": "pass" }, "ladder/04-spline-profiles/004-sweep-square-along-bezier": { @@ -537,7 +537,7 @@ "vertices": 8, "volume_mm3": 739.5292097504819 }, - "seconds": 0.037046017, + "seconds": 0.034935794, "status": "pass" }, "ladder/04-spline-profiles/005-loft-square-frustum": { @@ -549,7 +549,7 @@ "vertices": 8, "volume_mm3": 28000.000000000007 }, - "seconds": 0.009299752, + "seconds": 0.009518031, "status": "pass" }, "ladder/04-spline-profiles/006-loft-circle-frustum": { @@ -561,7 +561,7 @@ "vertices": 2, "volume_mm3": 21991.14802951055 }, - "seconds": 0.031463497, + "seconds": 0.042877884, "status": "pass" }, "ladder/04-spline-profiles/007-loft-three-circles": { @@ -573,7 +573,7 @@ "vertices": 2, "volume_mm3": 23457.221256199402 }, - "seconds": 0.038500679, + "seconds": 0.038671886, "status": "pass" }, "ladder/04-spline-profiles/008-loft-square-to-circle": { @@ -585,7 +585,7 @@ "vertices": 8, "volume_mm3": 26310.54362092466 }, - "seconds": 0.013877676, + "seconds": 0.020851108, "status": "pass" }, "ladder/04-spline-profiles/009-extrude-periodic-fit-spline": { @@ -597,7 +597,7 @@ "vertices": 12, "volume_mm3": 12281.011858436344 }, - "seconds": 0.028766989, + "seconds": 0.029248095, "status": "pass" }, "ladder/04-spline-profiles/010-part-bezier-window": { @@ -609,7 +609,7 @@ "vertices": 26, "volume_mm3": 54273.309277598055 }, - "seconds": 0.095040941, + "seconds": 0.105691401, "status": "pass" }, "ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined": { @@ -621,7 +621,7 @@ "vertices": 584, "volume_mm3": 44443.494125231206 }, - "seconds": 1.129550392, + "seconds": 1.125528009, "status": "pass" }, "ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad": { @@ -633,7 +633,7 @@ "vertices": 57, "volume_mm3": 100193.008857701 }, - "seconds": 0.499138439, + "seconds": 0.474738461, "status": "pass" }, "ladder/05-holes-and-taps/001-simple-through": { @@ -645,7 +645,7 @@ "vertices": 10, "volume_mm3": 46429.20345247036 }, - "seconds": 0.030064675, + "seconds": 0.018020219, "status": "pass" }, "ladder/05-holes-and-taps/002-simple-blind-flat": { @@ -657,7 +657,7 @@ "vertices": 10, "volume_mm3": 47214.60167821204 }, - "seconds": 0.024571035, + "seconds": 0.024898321, "status": "pass" }, "ladder/05-holes-and-taps/003-drilled-blind-118": { @@ -669,7 +669,7 @@ "vertices": 12, "volume_mm3": 47135.94953558977 }, - "seconds": 0.022535569, + "seconds": 0.02266329, "status": "pass" }, "ladder/05-holes-and-taps/004-counterbore": { @@ -681,7 +681,7 @@ "vertices": 12, "volume_mm3": 46926.50439234107 }, - "seconds": 0.048801764, + "seconds": 0.04904864, "status": "pass" }, "ladder/05-holes-and-taps/005-countersink": { @@ -693,7 +693,7 @@ "vertices": 12, "volume_mm3": 47219.57154291447 }, - "seconds": 0.060514999, + "seconds": 0.061193095, "status": "pass" }, "ladder/05-holes-and-taps/006-tapped-m6-through": { @@ -705,7 +705,7 @@ "vertices": 10, "volume_mm3": 47607.30072936878 }, - "seconds": 0.017080042, + "seconds": 0.017724234, "status": "pass" }, "ladder/05-holes-and-taps/007-tapped-m8-blind": { @@ -717,7 +717,7 @@ "vertices": 12, "volume_mm3": 47546.393985981646 }, - "seconds": 0.023700407, + "seconds": 0.02327246, "status": "pass" }, "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face": { @@ -729,7 +729,7 @@ "vertices": 4, "volume_mm3": 74844.80869901458 }, - "seconds": 0.068223193, + "seconds": 0.081519242, "status": "pass" }, "ladder/05-holes-and-taps/009-hole-0.5-from-edge": { @@ -741,7 +741,7 @@ "vertices": 10, "volume_mm3": 46429.20147858148 }, - "seconds": 0.017685341, + "seconds": 0.018684925, "status": "pass" }, "ladder/05-holes-and-taps/010-hole-tangent-to-end-face": { @@ -753,7 +753,7 @@ "vertices": 10, "volume_mm3": 46429.202650315056 }, - "seconds": 0.019412548, + "seconds": 0.019266191, "status": "pass" }, "ladder/05-holes-and-taps/011-crossing-holes-steinmetz": { @@ -765,7 +765,7 @@ "vertices": 17, "volume_mm3": 43954.275881084504 }, - "seconds": 0.063841221, + "seconds": 0.053044093, "status": "pass" }, "ladder/05-holes-and-taps/012-crossing-tapped-holes-offset": { @@ -777,7 +777,7 @@ "vertices": 14, "volume_mm3": 46870.21851307568 }, - "seconds": 0.071817865, + "seconds": 0.061035223, "status": "pass" }, "ladder/05-holes-and-taps/013-part-holes": { @@ -789,111 +789,211 @@ "vertices": 32, "volume_mm3": 53470.419311175334 }, - "seconds": 0.234927852, + "seconds": 0.22177746, "status": "pass" }, "ladder/06-threads/001-external-m10-full": { "measured": { - "area_mm2": 1529.0164922938948, + "area_mm2": 1528.998539117189, "body_count": 1, - "edges": 12, - "faces": 6, - "vertices": 8, - "volume_mm3": 1954.199115350778 + "edges": 252, + "faces": 86, + "vertices": 168, + "volume_mm3": 1954.2449542776249 }, - "seconds": 1.3368298730000001, + "seconds": 1.6369588849999999, "status": "pass" }, "ladder/06-threads/002-external-m10x1-fine": { "measured": { - "area_mm2": 1581.5491374615535, + "area_mm2": 1581.5205208524822, "body_count": 1, - "edges": 12, - "faces": 6, - "vertices": 8, - "volume_mm3": 2081.8666358146415 + "edges": 372, + "faces": 126, + "vertices": 248, + "volume_mm3": 2081.899948214229 }, - "seconds": 2.362301245, + "seconds": 2.412049282, "status": "pass" }, "ladder/06-threads/003-external-m10-partial-length": { "measured": { - "area_mm2": 1314.9714556944045, + "area_mm2": 1314.9630494174853, "body_count": 1, - "edges": 15, - "faces": 7, - "vertices": 10, - "volume_mm3": 2155.198115106591 + "edges": 132, + "faces": 46, + "vertices": 88, + "volume_mm3": 2155.2201253347134 }, - "seconds": 0.622200415, + "seconds": 0.826637836, "status": "pass" }, "ladder/06-threads/004-external-m10-to-shoulder": { "measured": { - "area_mm2": 2169.7800481918475, + "area_mm2": 2047.0228358498966, "body_count": 1, - "edges": 21, - "faces": 10, - "vertices": 14, - "volume_mm3": 3615.802302421407 + "edges": 213, + "faces": 74, + "vertices": 142, + "volume_mm3": 3648.5291584977404 }, - "seconds": 1.218730446, + "seconds": 1.367275082, "status": "pass" }, "ladder/06-threads/005-internal-m10-through": { "measured": { - "area_mm2": 4978.062684127769, + "area_mm2": 4978.101312600045, "body_count": 1, - "edges": 24, - "faces": 10, - "vertices": 16, - "volume_mm3": 16688.208561903153 + "edges": 186, + "faces": 64, + "vertices": 124, + "volume_mm3": 16688.181727949996 }, - "seconds": 0.726237522, + "seconds": 1.107371317, "status": "pass" }, "ladder/06-threads/006-external-m10-into-chamfer": { "measured": { - "area_mm2": 1508.1279652569233, + "area_mm2": 1508.108891537519, "body_count": 1, - "edges": 15, - "faces": 7, - "vertices": 10, - "volume_mm3": 1948.6477627849551 + "edges": 252, + "faces": 86, + "vertices": 168, + "volume_mm3": 1948.6927071991595 }, - "seconds": 1.3903218339999999, + "seconds": 1.652185436, "status": "pass" }, "ladder/06-threads/007-external-m10-at-filleted-shoulder": { "measured": { - "area_mm2": 2120.444130537007, + "area_mm2": 2018.7759360368239, "body_count": 1, - "edges": 24, - "faces": 11, - "vertices": 16, - "volume_mm3": 3636.797350214795 + "edges": 203, + "faces": 71, + "vertices": 135, + "volume_mm3": 3668.9704031534766 }, - "seconds": 1.231074762, + "seconds": 1.3640140029999999, "status": "pass" }, "ladder/06-threads/008-multi-start-thread": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1532.2853732955155, + "body_count": 1, + "edges": 264, + "faces": 90, + "vertices": 176, + "volume_mm3": 1954.245227235153 + }, + "seconds": 3.154548554, + "status": "pass" }, "ladder/06-threads/009-thread-runout-length": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2023.0564304737718, + "body_count": 1, + "edges": 214, + "faces": 77, + "vertices": 140, + "volume_mm3": 3673.436434421382 + }, + "seconds": 1.431738124, + "status": "pass" }, "ladder/06-threads/010-part-threaded-boss": { "measured": { - "area_mm2": 13583.777771562018, + "area_mm2": 13318.76579174848, "body_count": 1, - "edges": 63, - "faces": 25, - "vertices": 42, - "volume_mm3": 53114.19660782891 + "edges": 111, + "faces": 41, + "vertices": 74, + "volume_mm3": 53208.187629619366 }, - "seconds": 0.659778997, + "seconds": 0.701229636, + "status": "pass" + }, + "ladder/06-threads/011-external-tr20x4": { + "measured": { + "area_mm2": 3008.5109289311276, + "body_count": 1, + "edges": 84, + "faces": 30, + "vertices": 56, + "volume_mm3": 6065.464162834598 + }, + "seconds": 0.61208125, + "status": "pass" + }, + "ladder/06-threads/012-external-acme-3-4-6": { + "measured": { + "area_mm2": 2943.7315602592976, + "body_count": 1, + "edges": 84, + "faces": 30, + "vertices": 56, + "volume_mm3": 5689.271052485101 + }, + "seconds": 0.579189061, + "status": "pass" + }, + "ladder/06-threads/013-external-s20x4": { + "measured": { + "area_mm2": 3376.925753383339, + "body_count": 1, + "edges": 87, + "faces": 31, + "vertices": 58, + "volume_mm3": 5454.578654614414 + }, + "seconds": 0.597222753, + "status": "pass" + }, + "ladder/06-threads/014-external-buttress-asme-1.5-8": { + "measured": { + "area_mm2": 5916.2769083388575, + "body_count": 1, + "edges": 87, + "faces": 31, + "vertices": 58, + "volume_mm3": 19631.080967830752 + }, + "seconds": 0.672528778, + "status": "pass" + }, + "ladder/06-threads/015-internal-tr20x4-nut": { + "measured": { + "area_mm2": 9076.623586009078, + "body_count": 1, + "edges": 96, + "faces": 34, + "vertices": 64, + "volume_mm3": 32097.519799715614 + }, + "seconds": 0.614947997, + "status": "pass" + }, + "ladder/06-threads/016-external-m10-left-hand": { + "measured": { + "area_mm2": 1528.998538562401, + "body_count": 1, + "edges": 252, + "faces": 86, + "vertices": 168, + "volume_mm3": 1954.2449602433921 + }, + "seconds": 1.564137117, + "status": "pass" + }, + "ladder/06-threads/017-external-m10-chamfered-tip": { + "measured": { + "area_mm2": 1500.75072007837, + "body_count": 1, + "edges": 254, + "faces": 88, + "vertices": 168, + "volume_mm3": 1947.8329205613231 + }, + "seconds": 3.244508519, "status": "pass" }, "ladder/07-fillets/001-single-edge-r5": { @@ -905,7 +1005,7 @@ "vertices": 10, "volume_mm3": 47678.09530101598 }, - "seconds": 0.007045327, + "seconds": 0.00714156, "status": "pass" }, "ladder/07-fillets/002-four-vertical-edges-r5": { @@ -917,7 +1017,7 @@ "vertices": 16, "volume_mm3": 47570.79943563683 }, - "seconds": 0.014052829, + "seconds": 0.013761373, "status": "pass" }, "ladder/07-fillets/003-tangent-chain-r3": { @@ -929,7 +1029,7 @@ "vertices": 24, "volume_mm3": 47209.22370148293 }, - "seconds": 0.043514557, + "seconds": 0.043945698, "status": "pass" }, "ladder/07-fillets/004-convex-and-concave-r5": { @@ -941,7 +1041,7 @@ "vertices": 16, "volume_mm3": 14000.002049410516 }, - "seconds": 0.020404232, + "seconds": 0.010765204, "status": "pass" }, "ladder/07-fillets/005-variable-r5-to-r1": { @@ -953,7 +1053,7 @@ "vertices": 10, "volume_mm3": 47866.93985730924 }, - "seconds": 0.010664095, + "seconds": 0.010502899, "status": "pass" }, "ladder/07-fillets/006-variable-r5-to-zero": { @@ -965,7 +1065,7 @@ "vertices": 9, "volume_mm3": 47892.693434961286 }, - "seconds": 0.009475033, + "seconds": 0.009275967, "status": "pass" }, "ladder/07-fillets/007-variable-r5-to-1e-3": { @@ -977,7 +1077,7 @@ "vertices": 10, "volume_mm3": 47892.67196922709 }, - "seconds": 0.018208591, + "seconds": 0.019358912, "status": "pass" }, "ladder/07-fillets/008-constant-r1e-3": { @@ -989,7 +1089,7 @@ "vertices": 10, "volume_mm3": 47999.99997963964 }, - "seconds": 0.012294053, + "seconds": 0.006515974, "status": "pass" }, "ladder/07-fillets/009-corner-three-equal-r5": { @@ -1001,7 +1101,7 @@ "vertices": 13, "volume_mm3": 47377.122731304844 }, - "seconds": 0.01157685, + "seconds": 0.011727206, "status": "pass" }, "ladder/07-fillets/010-corner-unequal-r7-r3": { @@ -1013,7 +1113,7 @@ "vertices": 14, "volume_mm3": 47604.38618238413 }, - "seconds": 0.018646689, + "seconds": 0.030923239, "status": "pass" }, "ladder/07-fillets/011-chain-ending-at-corner": { @@ -1025,7 +1125,7 @@ "vertices": 11, "volume_mm3": 47475.477375283306 }, - "seconds": 0.009817834, + "seconds": 0.009689281, "status": "pass" }, "ladder/07-fillets/012-variable-into-rounded-corner": { @@ -1037,7 +1137,7 @@ "vertices": 12, "volume_mm3": 47754.87775109653 }, - "seconds": 0.0295324, + "seconds": 0.028910416, "status": "pass" }, "ladder/07-fillets/013-corner-setback": { @@ -1053,15 +1153,15 @@ "vertices": 3, "volume_mm3": 6231.659066701741 }, - "seconds": 0.040479616, + "seconds": 0.039329186, "status": "pass" }, "ladder/07-fillets/015-corner-g2-patch": { - "seconds": 0.002871708, + "seconds": 0.005262881, "status": "unsupported" }, "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7": { - "seconds": 0.026357347, + "seconds": 0.025799798, "status": "fail" }, "ladder/07-fillets/017-part-rounds": { @@ -1073,7 +1173,7 @@ "vertices": 39, "volume_mm3": 53151.0192291965 }, - "seconds": 0.388790715, + "seconds": 0.405183101, "status": "pass" }, "ladder/08-chamfers/001-equal-5": { @@ -1085,7 +1185,7 @@ "vertices": 10, "volume_mm3": 47250.000000000015 }, - "seconds": 0.01154789, + "seconds": 0.011884311, "status": "pass" }, "ladder/08-chamfers/002-two-distances-5-3": { @@ -1097,7 +1197,7 @@ "vertices": 10, "volume_mm3": 47550.00000001157 }, - "seconds": 0.006581516, + "seconds": 0.006158836, "status": "pass" }, "ladder/08-chamfers/003-distance-angle-5-30": { @@ -1109,7 +1209,7 @@ "vertices": 10, "volume_mm3": 47566.987298072774 }, - "seconds": 0.00646942, + "seconds": 0.006377221, "status": "pass" }, "ladder/08-chamfers/004-corner-three-equal-3": { @@ -1121,7 +1221,7 @@ "vertices": 14, "volume_mm3": 47480.25 }, - "seconds": 0.009521322, + "seconds": 0.01810766, "status": "pass" }, "ladder/08-chamfers/005-corner-two-mitred-3": { @@ -1133,7 +1233,7 @@ "vertices": 11, "volume_mm3": 47559.0 }, - "seconds": 0.008023283, + "seconds": 0.008225852, "status": "pass" }, "ladder/08-chamfers/006-curved-edge-2": { @@ -1145,7 +1245,7 @@ "vertices": 3, "volume_mm3": 6165.898978570243 }, - "seconds": 0.040025774, + "seconds": 0.03931853, "status": "pass" }, "ladder/08-chamfers/007-chamfer-then-fillets": { @@ -1157,7 +1257,7 @@ "vertices": 14, "volume_mm3": 47700.04681392183 }, - "seconds": 0.027111446, + "seconds": 0.026869289, "status": "pass" }, "ladder/08-chamfers/008-part-chamfers": { @@ -1169,7 +1269,7 @@ "vertices": 42, "volume_mm3": 53006.93294467868 }, - "seconds": 0.519171731, + "seconds": 0.514177481, "status": "pass" }, "ladder/09-shells-and-offsets/001-box-open-top-t2": { @@ -1181,7 +1281,7 @@ "vertices": 16, "volume_mm3": 11712.00000000001 }, - "seconds": 0.009184408, + "seconds": 0.017281497, "status": "pass" }, "ladder/09-shells-and-offsets/002-cylinder-open-top-t1": { @@ -1193,7 +1293,7 @@ "vertices": 4, "volume_mm3": 2045.1781194378996 }, - "seconds": 0.054106411, + "seconds": 0.06566697, "status": "pass" }, "ladder/09-shells-and-offsets/003-tube-two-open-faces": { @@ -1205,7 +1305,7 @@ "vertices": 16, "volume_mm3": 7680.000000000007 }, - "seconds": 0.009418953, + "seconds": 0.016733607, "status": "pass" }, "ladder/09-shells-and-offsets/004-thin-wall-0.2": { @@ -1217,7 +1317,7 @@ "vertices": 16, "volume_mm3": 1268.8319999999949 }, - "seconds": 0.016972329, + "seconds": 0.017096105, "status": "pass" }, "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2": { @@ -1229,7 +1329,7 @@ "vertices": 32, "volume_mm3": 11421.860960200946 }, - "seconds": 0.098389195, + "seconds": 0.094276137, "status": "pass" }, "ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2": { @@ -1241,7 +1341,7 @@ "vertices": 24, "volume_mm3": 11694.832919801527 }, - "seconds": 0.041722741, + "seconds": 0.043422064, "status": "pass" }, "ladder/09-shells-and-offsets/007-offset-top-face-5": { @@ -1253,7 +1353,7 @@ "vertices": 8, "volume_mm3": 60000.00000000002 }, - "seconds": 0.017068202, + "seconds": 0.01559306, "status": "pass" }, "ladder/09-shells-and-offsets/008-offset-cylinder-wall-2": { @@ -1265,7 +1365,7 @@ "vertices": 2, "volume_mm3": 9047.786411660763 }, - "seconds": 0.040247807, + "seconds": 0.040210149, "status": "pass" }, "ladder/09-shells-and-offsets/009-shell-outside-t2": { @@ -1277,7 +1377,7 @@ "vertices": 16, "volume_mm3": 13952.000000000015 }, - "seconds": 0.031217512, + "seconds": 0.030901975, "status": "pass" }, "ladder/09-shells-and-offsets/010-shell-under-rounded-top": { @@ -1289,7 +1389,7 @@ "vertices": 24, "volume_mm3": 11375.174354868088 }, - "seconds": 0.090267208, + "seconds": 0.101436608, "status": "pass" }, "ladder/09-shells-and-offsets/011-part-shell": { @@ -1301,7 +1401,7 @@ "vertices": 92, "volume_mm3": 15397.69748736967 }, - "seconds": 0.867852336, + "seconds": 0.852507562, "status": "pass" }, "ladder/09-shells-and-offsets/012-closed-shell-sealed-void": { @@ -1313,7 +1413,7 @@ "vertices": 16, "volume_mm3": 15743.999999999998 }, - "seconds": 0.008990887, + "seconds": 0.016617239, "status": "pass" }, "ladder/09-shells-and-offsets/013-dome-shelled-from-base": { @@ -1325,7 +1425,7 @@ "vertices": 4, "volume_mm3": 4540.648982326449 }, - "seconds": 0.123468649, + "seconds": 0.131831924, "status": "pass" }, "ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled": { @@ -1337,7 +1437,7 @@ "vertices": 32, "volume_mm3": 47497.57000224123 }, - "seconds": 0.089872966, + "seconds": 0.095305804, "status": "pass" }, "ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back": { @@ -1349,7 +1449,7 @@ "vertices": 7, "volume_mm3": 5540.613076260847 }, - "seconds": 0.691698914, + "seconds": 0.685183438, "status": "pass" }, "ladder/10-patterns-and-mirrors/001-rect-pattern-holes": { @@ -1361,7 +1461,7 @@ "vertices": 20, "volume_mm3": 22821.901949174513 }, - "seconds": 0.155016195, + "seconds": 0.153295004, "status": "pass" }, "ladder/10-patterns-and-mirrors/002-circular-pattern-holes": { @@ -1373,7 +1473,7 @@ "vertices": 18, "volume_mm3": 26012.383532001513 }, - "seconds": 0.352542366, + "seconds": 0.345883259, "status": "pass" }, "ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core": { @@ -1385,7 +1485,7 @@ "vertices": 26, "volume_mm3": 9195.866260243196 }, - "seconds": 0.243903077, + "seconds": 0.23648424, "status": "pass" }, "ladder/10-patterns-and-mirrors/004-mirror-body-joined": { @@ -1397,7 +1497,7 @@ "vertices": 12, "volume_mm3": 44858.40293082078 }, - "seconds": 0.036172974, + "seconds": 0.035426469, "status": "pass" }, "ladder/10-patterns-and-mirrors/005-mirror-feature": { @@ -1409,7 +1509,7 @@ "vertices": 12, "volume_mm3": 44858.4039421837 }, - "seconds": 0.038690761, + "seconds": 0.049767013, "status": "pass" }, "ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores": { @@ -1421,7 +1521,7 @@ "vertices": 26, "volume_mm3": 26304.552440002004 }, - "seconds": 0.670372726, + "seconds": 0.677654456, "status": "pass" }, "ladder/10-patterns-and-mirrors/007-pattern-bodies": { @@ -1433,7 +1533,7 @@ "vertices": 8, "volume_mm3": 1130.973281262568 }, - "seconds": 0.017452188, + "seconds": 0.017109497, "status": "pass" }, "ladder/10-patterns-and-mirrors/008-part-vents": { @@ -1445,7 +1545,7 @@ "vertices": 100, "volume_mm3": 15355.286014502955 }, - "seconds": 1.468559785, + "seconds": 1.481745126, "status": "pass" }, "ladder/11-cumulative-parts/001-bracket": { @@ -1457,7 +1557,7 @@ "vertices": 20, "volume_mm3": 31550.35228808287 }, - "seconds": 0.071211606, + "seconds": 0.059381366, "status": "pass" }, "ladder/11-cumulative-parts/002-flange": { @@ -1469,33 +1569,33 @@ "vertices": 20, "volume_mm3": 55442.52558072023 }, - "seconds": 0.502748653, + "seconds": 0.535863011, "status": "pass" }, "ladder/11-cumulative-parts/003-threaded-flange": { "measured": { - "area_mm2": 18059.595491495795, + "area_mm2": 17355.838402078, "body_count": 1, - "edges": 57, - "faces": 22, - "vertices": 38, - "volume_mm3": 52446.67350160611 + "edges": 104, + "faces": 38, + "vertices": 69, + "volume_mm3": 52978.053115805815 }, - "seconds": 1.769302135, + "seconds": 1.66538598, "status": "pass" }, "ladder/11-cumulative-parts/004-housing": { "measured": { - "area_mm2": 21277.09688631319, + "area_mm2": 21105.285520302223, "body_count": 1, - "edges": 172, - "faces": 64, - "vertices": 114, - "volume_mm3": 15051.402626654897 + "edges": 210, + "faces": 78, + "vertices": 139, + "volume_mm3": 15138.516074654483 }, - "seconds": 2.09595716, + "seconds": 2.150037131, "status": "pass" } }, - "reason": "twelve cases for the SMLib and tessellation fixes: point contact, near-coincident and merged faces, horn torus, crossing lofts, sealed and spherical shells" + "reason": "thread rework: forms, starts, hand, runout, chamfered tip, extents; screw sweep walls exact" } diff --git a/tests/kernel-cases/ladder/ladder.json b/tests/kernel-cases/ladder/ladder.json index 00b9110b8..aea1a98de 100644 --- a/tests/kernel-cases/ladder/ladder.json +++ b/tests/kernel-cases/ladder/ladder.json @@ -4,9 +4,9 @@ "cases": [ "ladder/01-primitives/001-box", "ladder/01-primitives/005-sphere", - "ladder/01-primitives/003-cone", "ladder/01-primitives/004-frustum", "ladder/01-primitives/002-cylinder", + "ladder/01-primitives/003-cone", "ladder/01-primitives/006-torus" ], "tier": "01-primitives", @@ -15,24 +15,24 @@ { "cases": [ "ladder/02-booleans/004-edge-on-edge-no-overlap", - "ladder/02-booleans/016-v-groove-pinches-bottom-to-line", "ladder/02-booleans/015-knife-edge-wedge-cut", + "ladder/02-booleans/020-part-back-wall", "ladder/02-booleans/001-coincident-face-join", "ladder/02-booleans/014-cut-through-sphere-pole", - "ladder/02-booleans/020-part-back-wall", + "ladder/02-booleans/016-v-groove-pinches-bottom-to-line", "ladder/02-booleans/003-pocket-flush-with-top", "ladder/02-booleans/019-notch-flush-with-end-face", "ladder/02-booleans/002-coplanar-overlap-join", - "ladder/02-booleans/008-near-tangent-gap-1e-6", - "ladder/02-booleans/010-near-tangent-overlap-1e-6", - "ladder/02-booleans/007-near-tangent-gap-1e-3", - "ladder/02-booleans/017-cylinder-tangent-top-and-bottom", "ladder/02-booleans/006-tangent-along-line-no-overlap", - "ladder/02-booleans/018-hole-tangent-to-side-face", + "ladder/02-booleans/007-near-tangent-gap-1e-3", + "ladder/02-booleans/010-near-tangent-overlap-1e-6", "ladder/02-booleans/009-near-tangent-overlap-1e-3", + "ladder/02-booleans/017-cylinder-tangent-top-and-bottom", "ladder/02-booleans/005-vertex-on-face-no-overlap", - "ladder/02-booleans/011-tangent-along-circle-through-hole", + "ladder/02-booleans/018-hole-tangent-to-side-face", "ladder/02-booleans/013-cut-across-cylinder-seam", + "ladder/02-booleans/008-near-tangent-gap-1e-6", + "ladder/02-booleans/011-tangent-along-circle-through-hole", "ladder/02-booleans/012-tangent-along-circle-bowl", "ladder/02-booleans/022-cylinder-grazing-a-hole-edge", "ladder/02-booleans/021-holes-touching-at-a-point", @@ -45,15 +45,15 @@ }, { "cases": [ - "ladder/03-analytic-profiles/006-revolve-partial-90", - "ladder/03-analytic-profiles/008-extrude-slot", "ladder/03-analytic-profiles/001-extrude-rect-with-arc-end", "ladder/03-analytic-profiles/007-revolve-180-touching-axis", + "ladder/03-analytic-profiles/006-revolve-partial-90", + "ladder/03-analytic-profiles/008-extrude-slot", + "ladder/03-analytic-profiles/003-extrude-tapered-circle", "ladder/03-analytic-profiles/002-extrude-annulus", "ladder/03-analytic-profiles/004-revolve-full-off-axis", - "ladder/03-analytic-profiles/003-extrude-tapered-circle", - "ladder/03-analytic-profiles/009-part-boss-and-slot", "ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere", + "ladder/03-analytic-profiles/009-part-boss-and-slot", "ladder/03-analytic-profiles/010-revolve-horn-torus-270" ], "tier": "03-analytic-profiles", @@ -61,13 +61,13 @@ }, { "cases": [ - "ladder/04-spline-profiles/001-extrude-bezier-arch", "ladder/04-spline-profiles/005-loft-square-frustum", + "ladder/04-spline-profiles/001-extrude-bezier-arch", "ladder/04-spline-profiles/008-loft-square-to-circle", "ladder/04-spline-profiles/009-extrude-periodic-fit-spline", - "ladder/04-spline-profiles/006-loft-circle-frustum", "ladder/04-spline-profiles/004-sweep-square-along-bezier", "ladder/04-spline-profiles/007-loft-three-circles", + "ladder/04-spline-profiles/006-loft-circle-frustum", "ladder/04-spline-profiles/003-pipe-along-bezier", "ladder/04-spline-profiles/002-revolve-bezier-profile", "ladder/04-spline-profiles/010-part-bezier-window", @@ -80,17 +80,17 @@ { "cases": [ "ladder/05-holes-and-taps/006-tapped-m6-through", + "ladder/05-holes-and-taps/001-simple-through", "ladder/05-holes-and-taps/009-hole-0.5-from-edge", "ladder/05-holes-and-taps/010-hole-tangent-to-end-face", "ladder/05-holes-and-taps/003-drilled-blind-118", "ladder/05-holes-and-taps/007-tapped-m8-blind", "ladder/05-holes-and-taps/002-simple-blind-flat", - "ladder/05-holes-and-taps/001-simple-through", "ladder/05-holes-and-taps/004-counterbore", - "ladder/05-holes-and-taps/005-countersink", "ladder/05-holes-and-taps/011-crossing-holes-steinmetz", - "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face", "ladder/05-holes-and-taps/012-crossing-tapped-holes-offset", + "ladder/05-holes-and-taps/005-countersink", + "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face", "ladder/05-holes-and-taps/013-part-holes" ], "tier": "05-holes-and-taps", @@ -98,22 +98,22 @@ }, { "cases": [ - "ladder/06-threads/003-external-m10-partial-length", + "ladder/06-threads/012-external-acme-3-4-6", + "ladder/06-threads/013-external-s20x4", + "ladder/06-threads/011-external-tr20x4", + "ladder/06-threads/015-internal-tr20x4-nut", + "ladder/06-threads/014-external-buttress-asme-1.5-8", "ladder/06-threads/010-part-threaded-boss", + "ladder/06-threads/003-external-m10-partial-length", "ladder/06-threads/005-internal-m10-through", - "ladder/06-threads/004-external-m10-to-shoulder", "ladder/06-threads/007-external-m10-at-filleted-shoulder", + "ladder/06-threads/004-external-m10-to-shoulder", + "ladder/06-threads/009-thread-runout-length", + "ladder/06-threads/016-external-m10-left-hand", "ladder/06-threads/001-external-m10-full", "ladder/06-threads/006-external-m10-into-chamfer", "ladder/06-threads/002-external-m10x1-fine", "ladder/06-threads/008-multi-start-thread", - "ladder/06-threads/009-thread-runout-length", - "ladder/06-threads/011-external-tr20x4", - "ladder/06-threads/012-external-acme-3-4-6", - "ladder/06-threads/013-external-s20x4", - "ladder/06-threads/014-external-buttress-asme-1.5-8", - "ladder/06-threads/015-internal-tr20x4-nut", - "ladder/06-threads/016-external-m10-left-hand", "ladder/06-threads/017-external-m10-chamfered-tip" ], "tier": "06-threads", @@ -122,18 +122,18 @@ { "cases": [ "ladder/07-fillets/015-corner-g2-patch", + "ladder/07-fillets/008-constant-r1e-3", "ladder/07-fillets/001-single-edge-r5", "ladder/07-fillets/006-variable-r5-to-zero", "ladder/07-fillets/011-chain-ending-at-corner", "ladder/07-fillets/005-variable-r5-to-r1", + "ladder/07-fillets/004-convex-and-concave-r5", "ladder/07-fillets/009-corner-three-equal-r5", - "ladder/07-fillets/008-constant-r1e-3", "ladder/07-fillets/002-four-vertical-edges-r5", "ladder/07-fillets/007-variable-r5-to-1e-3", - "ladder/07-fillets/010-corner-unequal-r7-r3", - "ladder/07-fillets/004-convex-and-concave-r5", "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7", "ladder/07-fillets/012-variable-into-rounded-corner", + "ladder/07-fillets/010-corner-unequal-r7-r3", "ladder/07-fillets/014-curved-edge-r2", "ladder/07-fillets/003-tangent-chain-r3", "ladder/07-fillets/017-part-rounds", @@ -144,11 +144,11 @@ }, { "cases": [ - "ladder/08-chamfers/003-distance-angle-5-30", "ladder/08-chamfers/002-two-distances-5-3", + "ladder/08-chamfers/003-distance-angle-5-30", "ladder/08-chamfers/005-corner-two-mitred-3", - "ladder/08-chamfers/004-corner-three-equal-3", "ladder/08-chamfers/001-equal-5", + "ladder/08-chamfers/004-corner-three-equal-3", "ladder/08-chamfers/007-chamfer-then-fillets", "ladder/08-chamfers/006-curved-edge-2", "ladder/08-chamfers/008-part-chamfers" @@ -158,18 +158,18 @@ }, { "cases": [ + "ladder/09-shells-and-offsets/007-offset-top-face-5", "ladder/09-shells-and-offsets/012-closed-shell-sealed-void", - "ladder/09-shells-and-offsets/001-box-open-top-t2", "ladder/09-shells-and-offsets/003-tube-two-open-faces", "ladder/09-shells-and-offsets/004-thin-wall-0.2", - "ladder/09-shells-and-offsets/007-offset-top-face-5", + "ladder/09-shells-and-offsets/001-box-open-top-t2", "ladder/09-shells-and-offsets/009-shell-outside-t2", "ladder/09-shells-and-offsets/008-offset-cylinder-wall-2", "ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2", "ladder/09-shells-and-offsets/002-cylinder-open-top-t1", + "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2", "ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled", "ladder/09-shells-and-offsets/010-shell-under-rounded-top", - "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2", "ladder/09-shells-and-offsets/013-dome-shelled-from-base", "ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back", "ladder/09-shells-and-offsets/011-part-shell"