From 77fecff18635025b2c5ca462a453e157fffc4aa0 Mon Sep 17 00:00:00 2001 From: Brennen Herbruck Date: Wed, 21 Oct 2026 06:20:39 -0400 Subject: [PATCH] kernel-cases: sweeps revolve cases from #2183-#4008 (refusals, flush ends, dome seam, primitives) Refusals for a profile across the axis and an axis outside the sketch plane, a construction axis picked by name, a cone left by a revolve cut, revolve joins and cuts whose end faces lie in a face of the target, a dome cut by a ball on its seam, a horn-torus turn, and half-disc revolves with a refused hostile sweep scale. Co-Authored-By: Claude Sonnet 5.5 --- .../expected.json | 10 ++ .../recipe.json | 52 +++++++ .../expected.json | 14 ++ .../recipe.json | 72 +++++++++ .../expected.json | 10 ++ .../recipe.json | 52 +++++++ .../expected.json | 24 +++ .../2667-revolve-half-disc-sphere/recipe.json | 72 +++++++++ .../expected.json | 12 ++ .../recipe.json | 72 +++++++++ .../expected.json | 9 ++ .../recipe.json | 99 ++++++++++++ .../expected.json | 11 ++ .../recipe.json | 107 +++++++++++++ .../expected.json | 25 +++ .../recipe.json | 74 +++++++++ .../expected.json | 10 ++ .../recipe.json | 144 ++++++++++++++++++ .../expected.json | 10 ++ .../recipe.json | 72 +++++++++ .../expected.json | 10 ++ .../recipe.json | 95 ++++++++++++ 22 files changed, 1056 insertions(+) create mode 100644 tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/expected.json create mode 100644 tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/recipe.json create mode 100644 tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/expected.json create mode 100644 tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/recipe.json create mode 100644 tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/expected.json create mode 100644 tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/recipe.json create mode 100644 tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/expected.json create mode 100644 tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/recipe.json create mode 100644 tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/expected.json create mode 100644 tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/recipe.json create mode 100644 tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/expected.json create mode 100644 tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/recipe.json create mode 100644 tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/expected.json create mode 100644 tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/recipe.json create mode 100644 tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/expected.json create mode 100644 tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/recipe.json create mode 100644 tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/expected.json create mode 100644 tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/recipe.json create mode 100644 tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/expected.json create mode 100644 tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/recipe.json create mode 100644 tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/expected.json create mode 100644 tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/recipe.json diff --git a/tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/expected.json b/tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/expected.json new file mode 100644 index 000000000..7742911dd --- /dev/null +++ b/tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2453", + "tangency-labs/solidcraft#2183" + ], + "what": "a rectangle that straddles the revolve axis (x from -5 to 15 about the sketch y axis)", + "source": "invariants", + "method": "a profile on both sides of the axis would sweep over itself, so no solid exists: the right behaviour is a clean refusal (invalid input), with no body made.", + "outcome": "refused" +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/recipe.json b/tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/recipe.json new file mode 100644 index 000000000..6605ed49c --- /dev/null +++ b/tests/kernel-cases/sweeps/2183-revolve-profile-crosses-the-axis-refused/recipe.json @@ -0,0 +1,52 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -5, + 0 + ], + "p1": [ + 15, + 10 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "y", + "angle": "360 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/expected.json b/tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/expected.json new file mode 100644 index 000000000..2abeb4632 --- /dev/null +++ b/tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/expected.json @@ -0,0 +1,14 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3796", + "tangency-labs/solidcraft#3619", + "tangency-labs/solidcraft#2516" + ], + "what": "a rectangle revolved about a construction axis picked by name (\"unknown sketch line `Axis1`\")", + "source": "analytic", + "method": "axis through (5,0,0) parallel to Z; the 10 x 15 rectangle at x 10..20 is 5..15 from it: a tube, V = pi (15^2 - 5^2) 15 = 9424.8; faces: outer wall, bore, two annular ends.", + "body_count": 1, + "volume_mm3": 9424.77796076938, + "area_mm2": 3141.5926535897934, + "faces": 4 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/recipe.json b/tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/recipe.json new file mode 100644 index 000000000..caa34177f --- /dev/null +++ b/tests/kernel-cases/sweeps/2516-revolve-about-a-named-construction-axis/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "construct.axis.two_points", + "params": { + "a": { + "point": [ + 5, + 0, + 0 + ] + }, + "b": { + "point": [ + 5, + 0, + 10 + ] + }, + "name": "Axis1" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 10, + 0 + ], + "p1": [ + 20, + 15 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "Axis1", + "angle": "360 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/expected.json b/tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/expected.json new file mode 100644 index 000000000..719a43a3d --- /dev/null +++ b/tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3736", + "tangency-labs/solidcraft#2607" + ], + "what": "a profile on the XZ plane revolved about the world Y axis, which does not lie in the sketch plane", + "source": "invariants", + "method": "the revolve axis must lie in the profile plane (the Y axis is perpendicular to the XZ plane): the right behaviour is a clean refusal, with no body made.", + "outcome": "refused" +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/recipe.json b/tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/recipe.json new file mode 100644 index 000000000..808ebff9a --- /dev/null +++ b/tests/kernel-cases/sweeps/2607-revolve-axis-outside-the-sketch-plane-refused/recipe.json @@ -0,0 +1,52 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 10, + 0 + ], + "p1": [ + 15, + 5 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "Y", + "angle": "45 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/expected.json b/tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/expected.json new file mode 100644 index 000000000..7b9c094a3 --- /dev/null +++ b/tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/expected.json @@ -0,0 +1,24 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2667" + ], + "what": "a half disc of radius 6 on the axis revolved a full turn (mutation survivor: half_disc area factor)", + "source": "analytic", + "method": "a ball: V = 4/3 pi 6^3 = 904.78, A = 4 pi 36 = 452.39; one spherical face.", + "body_count": 1, + "volume_mm3": 904.7786842338603, + "area_mm2": 452.3893421169302, + "faces": 1, + "bbox": { + "min": [ + -6, + -6, + -6 + ], + "max": [ + 6, + 6, + 6 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/recipe.json b/tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/recipe.json new file mode 100644 index 000000000..d1bbfa394 --- /dev/null +++ b/tests/kernel-cases/sweeps/2667-revolve-half-disc-sphere/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 0, + -6 + ], + "through": [ + 6, + 0 + ], + "end": [ + 0, + 6 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 6 + ], + [ + 0, + -6 + ] + ], + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "y", + "angle": "360 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/expected.json b/tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/expected.json new file mode 100644 index 000000000..d30df60fd --- /dev/null +++ b/tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2667" + ], + "what": "the same half disc revolved 270 degrees (mutation survivor: full_circle test of the sweep angle)", + "source": "analytic", + "method": "three quarters of the ball: V = 3/4 * 4/3 pi 6^3 = 678.58. Area: 3/4 of the sphere, 3/4 * 4 pi 36 = 339.29, plus two half-disc end faces (the planes at 0 and 270 degrees are perpendicular, so two faces) of pi 36 / 2 each, 113.10 together: A = 452.39. Faces: the spherical part and the two flat ends = 3.", + "body_count": 1, + "volume_mm3": 678.5840131753953, + "area_mm2": 452.3893421169302, + "faces": 3 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/recipe.json b/tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/recipe.json new file mode 100644 index 000000000..085d4aeff --- /dev/null +++ b/tests/kernel-cases/sweeps/2667-revolve-half-disc-three-quarters/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 0, + -6 + ], + "through": [ + 6, + 0 + ], + "end": [ + 0, + 6 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 6 + ], + [ + 0, + -6 + ] + ], + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "y", + "angle": "270 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/expected.json b/tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/expected.json new file mode 100644 index 000000000..51da95ffa --- /dev/null +++ b/tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2667" + ], + "what": "a sweep with an end scale of 500 (the engine allows 0.01 to 100): the option check (SweepControl::check) must refuse it", + "source": "invariants", + "method": "a scale outside 0.01..100 is a hostile value for the sweep options: the right behaviour is a clean refusal with no body made.", + "outcome": "refused" +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/recipe.json b/tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/recipe.json new file mode 100644 index 000000000..fe5dc6619 --- /dev/null +++ b/tests/kernel-cases/sweeps/2667-sweep-hostile-end-scale-refused/recipe.json @@ -0,0 +1,99 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Path" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 20 + ] + ], + "infer": false, + "ids": [ + "p1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "Sec" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "Sec", + "path_sketch": "Path", + "path": [ + "p1" + ], + "scale": 500, + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/expected.json b/tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/expected.json new file mode 100644 index 000000000..c4c701a08 --- /dev/null +++ b/tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3156", + "tangency-labs/solidcraft#3224" + ], + "what": "a rectangle revolved plus and minus 90 degrees about an axis in a plate top face: both planar end faces lie in that face and the join needed a tool nudge", + "source": "analytic", + "method": "plate 10 x 100 x 6 (z 41..47). The 4 mm wide ring (radii 30..37 about the axis y = 0, z = 47) spans -90..+90 degrees below the axis; its end faces lie in z = 47. Overlap with the plate: z >= 41 means r cos(phi) <= 6, i.e. phi from acos(6/r) to 90 degrees on each side: 4 * 2 * integral over r in [30,37] of r asin(6/r) dr, with antiderivative r^2/2 asin(6/r) + 3 sqrt(r^2 - 36). V = 6000 + 4 pi (37^2 - 30^2)/2 - overlap.", + "body_count": 1, + "volume_mm3": 8608.970248730224 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/recipe.json b/tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/recipe.json new file mode 100644 index 000000000..6f2f00509 --- /dev/null +++ b/tests/kernel-cases/sweeps/3156-revolve-join-end-faces-flush-with-a-face/recipe.json @@ -0,0 +1,107 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 10, + "width": 100, + "height": 6, + "corner": [ + -50, + -50, + 41 + ], + "body_name": "Plate" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Prof" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -47, + 10 + ], + [ + -43, + 10 + ], + [ + -43, + 17 + ], + [ + -47, + 17 + ] + ], + "infer": false, + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -60, + 47 + ], + [ + -30, + 47 + ] + ], + "infer": false, + "construction": true, + "ids": [ + "ax" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "ax", + "angle": "90 deg", + "angle2": "90 deg", + "operation": "join", + "profiles": [ + { + "point": [ + -45, + 13.5 + ] + } + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/expected.json b/tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/expected.json new file mode 100644 index 000000000..7ddccf98c --- /dev/null +++ b/tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/expected.json @@ -0,0 +1,25 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3911", + "tangency-labs/solidcraft#3191" + ], + "what": "a triangle sharing the cylinder side and top rim revolved as a cut to leave a cone (the cut never completed)", + "source": "analytic", + "method": "the triangle (20,0) (20,30) (0,30) revolved about the cylinder axis removes everything outside the cone from the apex (0,0,30) to the base rim r 20 at z = 0: V = pi 20^2 30 / 3, A = base pi 20^2 + lateral pi 20 sqrt(20^2 + 30^2); faces: cone and base disc.", + "body_count": 1, + "volume_mm3": 12566.370614359172, + "area_mm2": 3522.0717412637123, + "faces": 2, + "bbox": { + "min": [ + -20, + -20, + 0 + ], + "max": [ + 20, + 20, + 30 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/recipe.json b/tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/recipe.json new file mode 100644 index 000000000..36df4b2f6 --- /dev/null +++ b/tests/kernel-cases/sweeps/3191-revolve-cut-leaves-a-cone/recipe.json @@ -0,0 +1,74 @@ +{ + "commands": [ + { + "command": "solid.cylinder", + "params": { + "radius": 20, + "height": 30, + "base": [ + 0, + 0, + 0 + ], + "axis": "Z", + "body_name": "Blank" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Cut" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20, + 0 + ], + [ + 20, + 30 + ], + [ + 0, + 30 + ] + ], + "infer": false, + "closed": true + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "y", + "angle": "360 deg", + "operation": "cut" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/expected.json b/tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/expected.json new file mode 100644 index 000000000..1b4d8a897 --- /dev/null +++ b/tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3528" + ], + "what": "a ball of radius 4 centred on the dome of a revolved mushroom cap (azimuth 15 degrees, across an internal seam of the revolved faces), cut from it: removed nearly the whole ball", + "source": "analytic", + "method": "the cap is the revolution of the profile (0,0) (7,0) (7,20) (26,39), arc about (0,32.1) r 26.9 to (0,59), back: V = pi [49*20 + (26^3 - 7^3)/3 + 26.9^2 * 20 - (26.9^3 - 6.9^3)/3] = 46551.0. The ball centre is on the dome sphere (r 26.9), so the cut removes the lens of two spheres, radii 4 and 26.9 at distance 26.9: V = pi (R + r - d)^2 (d^2 + 2 d r - 3 r^2 + 2 d R + 6 r R - 3 R^2) / (12 d) = 126.5. The tool is consumed (keep_tools false): one body.", + "body_count": 1, + "volume_mm3": 46424.50587797245 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/recipe.json b/tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/recipe.json new file mode 100644 index 000000000..eaef4ad3a --- /dev/null +++ b/tests/kernel-cases/sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam/recipe.json @@ -0,0 +1,144 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Mushroom" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 7, + 0 + ] + ], + "infer": false + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 7, + 0 + ], + [ + 7, + 20 + ] + ], + "infer": false + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 7, + 20 + ], + [ + 26, + 39 + ] + ], + "infer": false + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0, + 32.1 + ], + "start": [ + 26, + 39 + ], + "end": [ + 0, + 59 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 59 + ], + [ + 0, + 0 + ] + ], + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "y", + "angle": "360 deg", + "operation": "new", + "body_name": "Cap" + } + }, + { + "command": "solid.sphere", + "params": { + "diameter": 8, + "center": [ + 17.38629136, + 4.658642729, + 52.090595805 + ], + "operation": "new", + "body_name": "Ball" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Cap", + "tools": [ + "Ball" + ], + "operation": "cut" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/expected.json b/tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/expected.json new file mode 100644 index 000000000..b9b665fb6 --- /dev/null +++ b/tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4007" + ], + "what": "the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees", + "source": "analytic", + "method": "Pappus: the half disc (the side away from the axis) has area pi 14^2 / 2 and centroid at 14 + 4 * 14 / (3 pi) from the axis: V = (270/360) 2 pi (14 + 4*14/(3 pi)) pi 14^2 / 2 = 28932.2 (the design measures 28930.7).", + "body_count": 1, + "volume_mm3": 28932.17609889229 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/recipe.json b/tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/recipe.json new file mode 100644 index 000000000..42b612d7a --- /dev/null +++ b/tests/kernel-cases/sweeps/4007-revolve-half-disc-horn-torus-270-degrees/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 14, + 0 + ], + "start": [ + 14, + -14 + ], + "end": [ + 14, + 14 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14, + 14 + ], + [ + 14, + -14 + ] + ], + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "Z", + "angle": "270 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/expected.json b/tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/expected.json new file mode 100644 index 000000000..791e8097f --- /dev/null +++ b/tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4008" + ], + "what": "a 7 x 21 rectangle 2.6 mm from a block vertical edge revolved as a symmetric 180 degree cut about that edge: both end faces of the tool lie in the block left face (refused as \"could not be computed reliably\")", + "source": "analytic", + "method": "block 60 x 20 x 25 (x 0..60, y 0..20); the ring (radii 2.6..9.6, height 21 inside the 25) turns +-90 degrees about the edge x = 0, y = 20; only the quarter with y < 20 lies in the block: V = 30000 - pi (9.6^2 - 2.6^2) 21 / 4 = 28591.467.", + "body_count": 1, + "volume_mm3": 28591.466933763015 +} \ No newline at end of file diff --git a/tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/recipe.json b/tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/recipe.json new file mode 100644 index 000000000..8e7941493 --- /dev/null +++ b/tests/kernel-cases/sweeps/4008-symmetric-revolve-cut-end-faces-in-the-side-face/recipe.json @@ -0,0 +1,95 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "length": 60, + "width": 20, + "height": 25, + "corner": [ + 0, + 0, + 0 + ], + "body_name": "Block" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 20.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Tool" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 2.6, + 2 + ], + "p1": [ + 9.6, + 23 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 0, + 25 + ] + ], + "infer": false, + "construction": true, + "ids": [ + "ax" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "ax", + "angle": "180 deg", + "direction": "symmetric", + "operation": "cut", + "profiles": [ + { + "point": [ + 6, + 10 + ] + } + ] + } + } + ] +} \ No newline at end of file