diff --git a/tests/kernel-cases/README.md b/tests/kernel-cases/README.md
index bac661f82..fdcb2824d 100644
--- a/tests/kernel-cases/README.md
+++ b/tests/kernel-cases/README.md
@@ -40,6 +40,7 @@ One directory per area, one per case: `tests/kernel-cases///`.
| `solids` (cones, scale, align, bounding solids) | tool coverage |
| `frames` (frame members, inserted profiles) | tool coverage |
| `plastic` (boss, lip and groove, rest, snap fit, plastic rules) | tool coverage rig |
+| `surfaces` (every `surface.*` tool: offset, ruled, untrim, unstitch, reverse normal, boundary, blend, match, fair, and a normal and an edge case of each of the others) | surfaces rig |
Each area also has its gate files: `KNOWN_FAILING` and `PATHS` (see [the gate](#the-kernel-rig-gate)).
@@ -97,6 +98,9 @@ the frozen truck-geometry PRs, a `kernel-paused` PR), for the report's coverage
| `faces`, `edges`, `vertices`, `shells`, `body_count` as `[min, max]` | An inclusive range, where the geometry only bounds a count (a modelled thread's faces). |
| `continuity` | `{order, edges}`: every seam `edges` names reaches `order` (`g0` … `g4`), as Continuity Analysis (`inspect.continuity`) measures it: from the faces' exact surfaces, at its default 33 stations a seam and its default tolerances (1 µm, 1°, 0.01 / mm, 0.001 / mm², 0.0001 / mm³), never loosened per case. A failure names the worst seam (lowest order; of those, the one furthest past the next order's tolerance), its faces, the order it reaches and that next order's worst value. `edges`: `blend` (default), every seam of a face a fillet or chamfer made (a round, a chamfer face or a corner patch) with the faces either side of the edge it replaced, and every seam of a corner patch with the rounds it joins: what the blend is built to meet (not where a round runs into an end face, nor where two rounds meet without a patch: that seam is the input's, tangent only where the rounded edges were); `corner`, those of them on a corner patch (a blend made from several replaced edges); or a list of points `[[x,y,z], …]`, the edges nearest them, as Continuity Analysis picks them. `exact: true`: every seam reaches `order` and not the next (a case built to an order proves the measurement reads that order, no more and no less). A constant round meets its faces G1 (curvature jumps by 1 / r), a `curvature` round G2, a chamfer G0; a `corner: g2` patch is built G2 to the rounds and faces round it. |
| `continuity` (older form) | `{near, within_mm, clear_mm, curvature_jump_per_mm}`: over every tangent seam lying wholly within `within_mm` of `near` (a corner's patch and its neighbours), the curvature jump across it (the faces' normal curvatures square to the seam, from their exact surfaces, at 65 stations a seam) is at most `curvature_jump_per_mm` at every station at least `clear_mm` along the seam from a vertex where two of those seams turn (where a neighbour's own G1 seam ends, which no surface is G2 to both sides of). A rolling ball's corner jumps 1 / r everywhere. |
+| `surface_types` | The set of kinds the faces' surfaces are, over every body, as the records hold them: `plane`, `cylinder`, `cone`, `sphere`, `torus`, `bspline` (a B-spline or NURBS surface) or `revolution` (a revolved curve). Exact: none missing, none extra. |
+| `splines` | `[{degree: [p, q], spans?: [m, n]}, …]`: one entry per B-spline face, each matching one face (directions in either order); `spans`, the distinct knot intervals each way, only where the construction fixes them. |
+| `boundary_edges` | The edges only one face uses (a sheet's free boundary), over every body, as the records hold them; exact or `[min, max]`. |
| `watertight` | `true`: each body's display mesh (chord tolerance `tolerance.mesh_mm`, default 0.01 mm) has no open and no over-shared edges, with vertices closer than `tolerance.weld_mm` (default 1e-4 mm) taken as one. |
| `timeout_s` | A longer timeout for this case than the run's (at most 1800 s), for cases that are slow by nature. A case that only needs it on a loaded machine shouldn't set it. |
| `tolerance` | Optional overrides: `rel`, `abs_mm`, `mesh_mm`, `weld_mm`. |
diff --git a/tests/kernel-cases/surfaces/KNOWN_FAILING b/tests/kernel-cases/surfaces/KNOWN_FAILING
new file mode 100644
index 000000000..fe07e824c
--- /dev/null
+++ b/tests/kernel-cases/surfaces/KNOWN_FAILING
@@ -0,0 +1,5 @@
+# The surfaces cases that fail today, one a line: ` `. Sorted. Run as a
+# regression gate (`cargo xtask kernel-cases --area surfaces --known-failing `), a case
+# that fails and is not listed fails it, and so does a listed case that passes: a fix removes its
+# line in the same pull request.
+# Baseline: rig-cases-surfaces 45f69c0e5 with SMLib 60b1c6a, aarch64 Linux.
diff --git a/tests/kernel-cases/surfaces/PATHS b/tests/kernel-cases/surfaces/PATHS
new file mode 100644
index 000000000..c9f751bb6
--- /dev/null
+++ b/tests/kernel-cases/surfaces/PATHS
@@ -0,0 +1,32 @@
+# The sources whose change must rerun the surfaces area: one git pathspec glob a line.
+# The commands.
+crates/engine/src/cmd/surface.rs
+crates/engine/src/cmd/surface_boundary.rs
+crates/engine/src/cmd/surface_match.rs
+crates/engine/src/params.rs
+# Their evaluation.
+crates/doc/src/eval_surface.rs
+crates/doc/src/eval.rs
+# The kernel code they call.
+crates/kernel/src/boundary.rs
+crates/kernel/src/boundary_network.rs
+crates/kernel/src/bridge.rs
+crates/kernel/src/fair.rs
+crates/kernel/src/fill*.rs
+crates/kernel/src/loft*.rs
+crates/kernel/src/matchsurf.rs
+crates/kernel/src/native.rs
+crates/kernel/src/surface_extend.rs
+crates/kernel/src/surface_offset.rs
+crates/kernel/src/surface_ruled.rs
+crates/kernel/src/surface_trim.rs
+crates/kernel/src/surface_untrim.rs
+crates/kernel/src/surfaces.rs
+crates/kernel/src/sweep*.rs
+crates/kernel/src/smlib_sweeps.rs
+crates/geom/src/fill*.rs
+crates/geom/src/network*.rs
+# SMLib and the rig itself.
+crates/smlib/**
+apps/solidcraft-cli/src/kernel_cases.rs
+tests/kernel-cases/surfaces/**
diff --git a/tests/kernel-cases/surfaces/cov-offset-box-top-face-up/expected.json b/tests/kernel-cases/surfaces/cov-offset-box-top-face-up/expected.json
new file mode 100644
index 000000000..121a935ce
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-box-top-face-up/expected.json
@@ -0,0 +1,26 @@
+{
+ "sources": [],
+ "what": "the top face of a 20 x 10 x 10 box offset 5 up: a plane moves exactly",
+ "source": "analytic",
+ "method": "the top (z = 10) along its outward normal +z by 5: the square 20 x 10 at z = 15, area 200, one plane face with its 4 edges free; the box is removed so only the offset is graded",
+ "valid": false,
+ "body_count": 1,
+ "faces": 1,
+ "boundary_edges": 4,
+ "area_mm2": 200.0,
+ "surface_types": [
+ "plane"
+ ],
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 15
+ ],
+ "max": [
+ 20,
+ 10,
+ 15
+ ]
+ }
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-box-top-face-up/recipe.json b/tests/kernel-cases/surfaces/cov-offset-box-top-face-up/recipe.json
new file mode 100644
index 000000000..5f1c7c61b
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-box-top-face-up/recipe.json
@@ -0,0 +1,35 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 20,
+ "width": 10,
+ "height": 10,
+ "body_name": "Box"
+ }
+ },
+ {
+ "command": "surface.offset",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 5,
+ 10
+ ]
+ ],
+ "distance": 5,
+ "body_name": "Lid"
+ }
+ },
+ {
+ "command": "solid.remove",
+ "params": {
+ "bodies": [
+ "Box"
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-cylinder-side-out/expected.json b/tests/kernel-cases/surfaces/cov-offset-cylinder-side-out/expected.json
new file mode 100644
index 000000000..877034a22
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-cylinder-side-out/expected.json
@@ -0,0 +1,26 @@
+{
+ "sources": [],
+ "what": "the side of a cylinder r 10, 20 high, offset 2 outward: the cylinder r 12",
+ "source": "analytic",
+ "method": "a cylinder's offset along its outward normal is the coaxial cylinder r + d = 12: A = 2 pi 12 20 = 1507.96; one face closed on its seam, its two circles free",
+ "valid": false,
+ "body_count": 1,
+ "faces": 1,
+ "boundary_edges": 2,
+ "area_mm2": 1507.9644737231006,
+ "surface_types": [
+ "cylinder"
+ ],
+ "bbox": {
+ "min": [
+ -12,
+ -12,
+ 0
+ ],
+ "max": [
+ 12,
+ 12,
+ 20
+ ]
+ }
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-cylinder-side-out/recipe.json b/tests/kernel-cases/surfaces/cov-offset-cylinder-side-out/recipe.json
new file mode 100644
index 000000000..5be009491
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-cylinder-side-out/recipe.json
@@ -0,0 +1,34 @@
+{
+ "commands": [
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 10,
+ "height": 20,
+ "body_name": "Post"
+ }
+ },
+ {
+ "command": "surface.offset",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 0,
+ 10
+ ]
+ ],
+ "distance": 2,
+ "body_name": "Sleeve"
+ }
+ },
+ {
+ "command": "solid.remove",
+ "params": {
+ "bodies": [
+ "Post"
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-sphere-inward-closes-a-solid/expected.json b/tests/kernel-cases/surfaces/cov-offset-sphere-inward-closes-a-solid/expected.json
new file mode 100644
index 000000000..ebe0d3b66
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-sphere-inward-closes-a-solid/expected.json
@@ -0,0 +1,22 @@
+{
+ "sources": [],
+ "what": "every face of a sphere r 10 (its smooth chain) offset 4 inward: the sphere r 6, closed, so a solid",
+ "source": "analytic",
+ "method": "the offset of a sphere by -4 along its outward normal is the concentric sphere r 6: A = 4 pi 36 = 452.389, V = 4/3 pi 216 = 904.779; its faces meet smoothly, so their offsets still share every edge and close up into a solid",
+ "body_count": 1,
+ "area_mm2": 452.3893421169302,
+ "volume_mm3": 904.7786842338603,
+ "boundary_edges": 0,
+ "bbox": {
+ "min": [
+ -6,
+ -6,
+ -6
+ ],
+ "max": [
+ 6,
+ 6,
+ 6
+ ]
+ }
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-sphere-inward-closes-a-solid/recipe.json b/tests/kernel-cases/surfaces/cov-offset-sphere-inward-closes-a-solid/recipe.json
new file mode 100644
index 000000000..ff309038d
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-sphere-inward-closes-a-solid/recipe.json
@@ -0,0 +1,34 @@
+{
+ "commands": [
+ {
+ "command": "solid.sphere",
+ "params": {
+ "radius": 10,
+ "body_name": "Ball"
+ }
+ },
+ {
+ "command": "surface.offset",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 0,
+ 0
+ ]
+ ],
+ "chain": true,
+ "distance": -4,
+ "body_name": "Core"
+ }
+ },
+ {
+ "command": "solid.remove",
+ "params": {
+ "bodies": [
+ "Ball"
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-tolerance-out-of-range-refused/expected.json b/tests/kernel-cases/surfaces/cov-offset-tolerance-out-of-range-refused/expected.json
new file mode 100644
index 000000000..3985fc2a1
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-tolerance-out-of-range-refused/expected.json
@@ -0,0 +1,8 @@
+{
+ "sources": [],
+ "what": "an offset asked to fit within 20 mm: refused, the tolerance is 0.000001 to 10 mm",
+ "source": "invariants",
+ "method": "the fitting tolerance has a range; outside it the command refuses with that range rather than building",
+ "outcome": "refused",
+ "refusal": "the offset tolerance must be 0.000001…10 mm"
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-tolerance-out-of-range-refused/recipe.json b/tests/kernel-cases/surfaces/cov-offset-tolerance-out-of-range-refused/recipe.json
new file mode 100644
index 000000000..34f182c95
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-tolerance-out-of-range-refused/recipe.json
@@ -0,0 +1,27 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 20,
+ "width": 10,
+ "height": 10,
+ "body_name": "Box"
+ }
+ },
+ {
+ "command": "surface.offset",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 5,
+ 10
+ ]
+ ],
+ "distance": 5,
+ "tolerance": 20
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-two-faces-across-a-sharp-edge-come-apart/expected.json b/tests/kernel-cases/surfaces/cov-offset-two-faces-across-a-sharp-edge-come-apart/expected.json
new file mode 100644
index 000000000..c7a0b445b
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-two-faces-across-a-sharp-edge-come-apart/expected.json
@@ -0,0 +1,27 @@
+{
+ "sources": [],
+ "what": "the top and the front of a box offset 1 together: across their sharp edge the offsets part, so one body of two separate faces",
+ "source": "analytic",
+ "method": "top (z = 10, 20 x 10) to z = 11, front (y = 0, 20 x 10) to y = -1: the two planes no longer meet (their edges are 1.41 apart), so two open shells of 4 free edges each; area 200 + 200",
+ "valid": false,
+ "body_count": 1,
+ "shells": 2,
+ "faces": 2,
+ "boundary_edges": 8,
+ "area_mm2": 400.0,
+ "surface_types": [
+ "plane"
+ ],
+ "bbox": {
+ "min": [
+ 0,
+ -1,
+ 0
+ ],
+ "max": [
+ 20,
+ 10,
+ 11
+ ]
+ }
+}
diff --git a/tests/kernel-cases/surfaces/cov-offset-two-faces-across-a-sharp-edge-come-apart/recipe.json b/tests/kernel-cases/surfaces/cov-offset-two-faces-across-a-sharp-edge-come-apart/recipe.json
new file mode 100644
index 000000000..affad4f63
--- /dev/null
+++ b/tests/kernel-cases/surfaces/cov-offset-two-faces-across-a-sharp-edge-come-apart/recipe.json
@@ -0,0 +1,40 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 20,
+ "width": 10,
+ "height": 10,
+ "body_name": "Box"
+ }
+ },
+ {
+ "command": "surface.offset",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 5,
+ 10
+ ],
+ [
+ 10,
+ 0,
+ 5
+ ]
+ ],
+ "distance": 1,
+ "body_name": "Pair"
+ }
+ },
+ {
+ "command": "solid.remove",
+ "params": {
+ "bodies": [
+ "Box"
+ ]
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/surfaces/skipped.json b/tests/kernel-cases/surfaces/skipped.json
new file mode 100644
index 000000000..7f3f350d2
--- /dev/null
+++ b/tests/kernel-cases/surfaces/skipped.json
@@ -0,0 +1,3 @@
+[
+ {"source": "surface.fillet", "why": "planned (#769): registered, not built yet; no geometry to grade until it is"}
+]