diff --git a/tests/KNOWN_FAILING_TESTS b/tests/KNOWN_FAILING_TESTS index d23990003..35a8e45f0 100644 --- a/tests/KNOWN_FAILING_TESTS +++ b/tests/KNOWN_FAILING_TESTS @@ -8,10 +8,12 @@ # and junit-gpu-1..4), run `cargo xtask known-failing --junit `, then drop each FIXED line and # add each REGRESSION line with its cause, from the test's failure message. solidcraft-cli::action_matrix::action_matrix_sample 3 baseline actions fail, the same 3 as on C++: 2 shells (Bad Loop Orient on issue-616-lid-ribs; status 1001 on filleted-shelled-box), 1 fillet (SmSurfOfRevolution Test #7 on oblique_cut_of_cylinder) -solidcraft-cli::model_cache::a_later_round_after_opening_blends_the_saved_rounds_again the later r3 round at the r2 mitre builds solidcore's 10-face corner (7928.743041), the test wants SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310: 15 faces, 7928.142563938 +solidcraft-cli::model_cache::a_later_round_after_opening_blends_the_saved_rounds_again the later r3 round at the r2 mitre builds 7927.724283 since solidcore#2382 (a9ef4c707, the least-certifying setback scale); the test wants SMLib f916a8d's setback corner (smlib#104), 15 faces, 7928.142563938, which solidcore#2369 built (7928.142564) solidcraft-cli::naming_corpus::corpus_designs_name_alike_every_build_and_fail_where_a_reference_is_gone oracle/83-boundary-loop-thicken does not load: step 8, thicken status 1001, as on C++ +solidcraft-doc::eval::chain_tests::a_propagated_chain_that_cannot_build_says_how_to_blend_the_edge_alone with tangent_chain off the r3 round builds 9 faces, the test wants 8, since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d solidcraft-doc::eval::cost_tests::a_tap_marking_searches_only_the_bodies_near_it main's mesh-based version (#10303) not taken; the exact replacement is to come solidcraft-doc::eval::cost_tests::a_tap_marking_still_searches_the_bodies_within_its_reach main's mesh-based version (#10303) not taken; the exact replacement is to come +solidcraft-engine::boolean_regression_tests::box_intersect_splits_the_end_off_a_raked_wedge_after_its_end_rounds the wedge's end rounds fail status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c solidcraft-engine::cmd::edit::tests::inserting_variable_fillet_control_preserves_parameters_at_existing_positions solidcore refuses a variable fillet whose law has a corner (solidcore#430) solidcraft-engine::cmd::file::tests::each_format_has_an_export_command_of_its_own the box's planar faces are meshed into 124 triangles, not 12 (the STL is 6284 bytes, the test counts 84 + 50 x 12), as on SMLib solidcraft-engine::cmd::sketch_project::tests::intersection_curve_of_picked_faces_spans_the_whole_surface its premise fails off truck: the fit-point spline wall's 3 span faces are not one surface patch in the kernel's mesh (surface_patch gives 1 face, the test wants 3), as on SMLib @@ -19,16 +21,32 @@ solidcraft-engine::extent_tests::cut_to_the_far_side_of_a_curved_wall main's mes solidcraft-engine::face_name_tests::a_join_that_makes_the_body_bigger_leaves_round_walls_it_never_touched_alone main's edge lookup by a stored point (#11286) finds the edge on the display mesh (edge_near on the body's mesh), not taken; the exact replacement is to come solidcraft-engine::hole_face_tests::a_hole_wider_than_the_part_says_it_removes_all_of_it a 40 mm hole at (10, 10) touches the plate's edge y = 30 at one point; the kernel parts the plate there into 2 bodies, the test wants truck's 1, as on SMLib solidcraft-engine::measure_centre_tests::a_fillet_round_a_boss_reports_its_radius the round at the foot of a boss is not an analytic torus of minor radius 3, so no face of the body is (the test finds none to measure), as on SMLib +solidcraft-engine::pleat_regressions::mirrored_pleat_joins_into_a_thick_case_wall FilletRearOuter and FilletRearInner fail status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c +solidcraft-engine::pleat_regressions::pleat_built_at_the_far_end_joins_the_finished_case FilletRearOuter and FilletRearInner fail status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c +solidcraft-engine::tests::a_later_round_at_a_mitred_corner_is_blended_with_the_rounds_there the later r3 round at the r2 mitre builds 7927.724283 since solidcore#2382 (a9ef4c707, the least-certifying setback scale); 7928.142564 at solidcore#2369 (the fork's setback corner, smlib#104); the test wants the old 10-face corner, 7928.743041 solidcraft-engine::tests::chord_and_variable_fillets its 2 → 4 → 2 waist: solidcore refuses a variable fillet whose law has a corner (solidcore#430) solidcraft-engine::tests::fillet_fit_taper_closes_to_a_point fillet status 1001 on the taper fit (radius 16 closing to 0), as on C++ solidcraft-engine::tests::mirror_placed::dragging_a_mirrored_part_meshes_its_copies_once a copy of a copy drawn from its first copy's triangles (#10101) is triangulated differently from a fresh mesh of it, where truck's meshes are the same under a rigid move, as on SMLib +solidcraft-engine::tests::pleat_join::the_pleats_join_at_every_wall_from_2_4_to_2_6_mm at 2.5 mm FilletRearOuter and FilletRearInner fail status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c +solidcraft-engine::tests::robustness::a_boundary_found_across_a_seam_is_not_used seed 20's fillet fails status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c +solidcraft-engine::tests::robustness::fillet_into_an_earlier_round the r3 round into the r2 round measures 35923.387 against the closed form 35919.524 (within 2 wanted) since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d solidcraft-kernel::blend::corner_tests::a_round_ending_in_an_earlier_round_matches_both_together fillet status 1001 on the round that ends in the earlier one, as on C++ solidcraft-kernel::blend::corner_tests::corner_blends_hold_at_any_scale at 0.01x the arc case's rounds remove 72.783 (scaled back) against 72.713 at 1x, as on C++ +solidcraft-kernel::blend_corner::tests::a_round_next_to_a_round_of_another_radius the r3 round ending on the r2 round makes 9 faces, the test wants 8, since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d solidcraft-kernel::blend_corner::tests::issue2422_vertical_after_separate_bottom_rounds the vertical edge after the separate bottom rounds is refused as smooth ("its faces meet tangentially, so there is nothing to round"): the rounds leave it tangent at solidcore 8ddce9016 +solidcraft-kernel::blend_smlib::tests::smooth_edges_and_unfinished_tangent_chains_are_refused_saying_why the r1 top round alone measures 7957.723 against the closed form 7957.505 since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d solidcraft-kernel::blend_variable::tests::variable_radius_with_a_corner_through_a_middle_point solidcore refuses a variable fillet whose law has a corner (solidcore#430) solidcraft-kernel::corner_g2::tests::a_long_setback_keeps_the_g2_patch_inside_the_box at set backs 11 to 15 the G2 corner patch bulges past the box, as on C++ solidcraft-kernel::corner_g2::tests::curvature_rounds_meet_at_a_g2_corner the corner between curvature rounds jumps 2.07 in curvature over 538 stations on solidcore; the test wants it curvature continuous, as SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 builds it solidcraft-kernel::corner_g2::tests::the_box_corner_g2_patch_is_a_closed_solid_curvature_continuous_to_its_neighbours the fitted G2 corner patch bulges 1.7e-5 past the box, as on C++ solidcraft-kernel::fillet_setback_tests::a_setback_not_past_the_radius_is_refused_naming_the_least solidcore builds setback 5.5 (15 faces) where SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 refuses it naming the least that builds; nothing names the least setback on solidcore until then +solidcraft-kernel::issue_851_tests::blend_the_arc_top_edge_and_the_top_front_edge the arc then the front removes 59.148 against 60.122 since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d +solidcraft-kernel::issue_851_tests::fillet_the_arc_top_edge_and_the_front_upright_at_the_arc the arc then the upright removes 31.497 against 32.310 since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d +solidcraft-kernel::issue_851_tests::fillet_the_top_front_edge_and_the_front_left_upright the top front then the upright removes 42.236 against 43.187 since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d +solidcraft-kernel::issue_851_tests::fillet_the_top_front_edge_and_the_front_upright_at_the_arc the top front then the upright removes 41.341 against 42.146 since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d solidcraft-kernel::native::tests::box_and_fillet_have_stable_wire_records the box-edge round's wire record differs from the fixture at solidcore 8ddce9016 (a value 3 is 5): the fixture is re-blessed (NATIVE_BREP_BLESS=1) once the change is shown right +solidcraft-kernel::tests::fillet_partial_mixed_arc_and_line_perimeter_run the partial arc-and-line run fails status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c +solidcraft-kernel::tests::fillet_tabbed_plate_outer_loop_and_partial_selection_after_hole the tabbed plate's outer-loop rounds fail status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c +solidcraft-smlib::core::blend_tests::tabbed_plate_rounds_mitred_on_the_arcs_continuation the rounds fail status 1001 since solidcore#2480 (819a5ad3a, the procedural blend record); passes at 7906d0d0c solidcraft-smlib::ops::tests::a_variable_round_with_a_corner_in_its_law_is_its_balls_union solidcore refuses a variable fillet whose law has a corner (solidcore#430) +solidcraft-smlib::ops::tests::fillet_takes_exactly_the_picked_edges one picked edge of the rim's tangent chain adds 9 faces, the test wants 1, since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d diff --git a/tests/kernel-cases/fillets/KNOWN_FAILING b/tests/kernel-cases/fillets/KNOWN_FAILING index 4282e4ab7..61430fa31 100644 --- a/tests/kernel-cases/fillets/KNOWN_FAILING +++ b/tests/kernel-cases/fillets/KNOWN_FAILING @@ -2,11 +2,14 @@ # The kernel rig gate fails on a case that fails and is not listed, and on a listed case that passes. # Baseline: solidcore pin 5d2635d36, tests/kernel-cases run by `cargo xtask kernel-cases`, x86_64 Linux. 1080-fillet-equal-slope-basin-1-mm-rim-loop-4 [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0', want >= g1 at every blend seam +1080-fillet-notched-block-top-outline-r8 [fail] continuity_order: g0, a blend seam meets at 90 degrees, want >= g1 at every blend seam; 15 faces (13 before) since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d 1080-fillet-sloped-basin-1-mm-rim-r4-2-edges [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0', want >= g1 at every blend seam 1080-fillet-sloped-basin-1-mm-rim-r4-4-edges [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0', want >= g1 at every blend seam +1207-fillet-box-end-edge-into-unblended-round-partial-chain [fail] continuity_order: g0, a contact seam meets at 90 degrees, want >= g1 at every blend seam; 9 faces (8 before) since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d 2893-chamfer-distance-and-angle-past-the-wall-refused [fail] refused, but not because "angle": step 2 (solid.chamfer): SMLib chamfer: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) 2893-chamfer-two-distances-elliptical-rim [fail] refused, but not because "not supported yet": step 3 (solid.chamfer): SMLib chamfer: operation: SMLib failed (status 1001) (tangent propagation blended the picked edges' tangent chain with them; with it off, tangent_chain: 4782-fillet-bar-edge-wider-than-both-faces [fail] continuity_order: got Box: no null seams want >= g1 at every blend seam +5158-fillet-adjacent-plate-edges-as-thick-as-plate [fail] continuity_order: g0, a contact seam meets at 90 degrees, want >= g1 at every blend seam; 10 faces (8 before) since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d 9-fillet-corner-curvature-with-reduce-fit [unsupported] solid.fillet builds `corner: g2` with `fit: exact` only 9-fillet-corner-curvature-with-taper-fit [unsupported] solid.fillet builds `corner: g2` with `fit: exact` only cov-fillet-g2-corner-beside-a-cylinder [fail] step 6 (solid.fillet): the open setback corner is not a closed solid, as on SMLib d01d7b0 @@ -18,6 +21,9 @@ cov-fillet-g2-pocket-corner [fail] continuity_order: G1 at one seam where the co cov-junction-boss-tilt-20-root-round [fail] fillet status 1001 on a cylinder tilted 20 degrees into the plate, as on SMLib cov-junction-tee-equal-round [fail] the result is not a closed solid, as on SMLib: equal pipes' intersection is two plane ellipses crossing, a corner the old corner code cannot join (the corner step) cov-junction-y-junction-120-round [unsupported] refused as on SMLib: the faces between the three intersection curves narrow to nothing at the two triple points, so the room check trips (the corner step) +every-block-cylinder-tangent-concave-arc-r2-partial-chain [fail] continuity_order: g0, a contact seam meets at 90 degrees, want >= g1 at every blend seam since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d +every-fillet-after-fillet-curvature-front-then-side-r3-partial-chain [fail] continuity_order: g0, a contact seam meets at 90 degrees, want >= g2 at every blend seam since solidcore#2364 (845bdb4e0, the smooth-vertex End); passes at fb937dd8d report-drafted-peg-front-and-concave-rounds-together-r2 [unsupported] step 13 (solid.fillet): invalid input: not supported yet: the fillet meets a corner of this kind, which SMLib's blends do not handle yet (where its ed report-fillet-curvature-three-edges-at-bar-corner [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0 (see KNOWN_FAILING) report-fillet-curvature-three-edges-at-bar-corner-solver-residues [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0 (see KNOWN_FAILING) +report-fillet-curvature-three-edges-at-bar-corner-solver-residues-outside-setback [unsupported] the corner fill is refused (misses its neighbours' curvature by 4.02e-3, tolerance 2.5e-3) since solidcore#2369 (23a97889b, the setback corner); built the closed form's 9526.705048 at 8ddce9016