diff --git a/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/expected.json b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/expected.json new file mode 100644 index 000000000..a3982963c --- /dev/null +++ b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1092", + "tangency-labs/solidcraft#1314" + ], + "what": "an L section modelled with a bend of R2 inside and R4 outside, converted at that bend under a rule of R3: the bend becomes one bend of the rule's radius at the legs' virtual sharp", + "source": "analytic", + "method": "T = 2, R = 3, K = 0.5: BD(90) = 2*(R+T) - (pi/2)(R + K t) = 10 - 2*pi = 3.7168. The outer legs are 60 and 40 long (to the outer virtual sharp at the origin), so the flat length is 100 - BD = 96.2832, 50 wide, 2 thick; with K = 0.5 the folded volume is the flat area times t: V = 50*2*(100 - BD)", + "body_count": 1, + "volume_mm3": 9628.31853071796 +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/recipe.json b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/recipe.json new file mode 100644 index 000000000..1fda196e8 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/recipe.json @@ -0,0 +1,147 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "R3", + "thickness": "2 mm", + "active": true, + "bend_radius": "3 mm", + "k_factor": 0.5 + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "L" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 40 + ], + [ + 0, + 4 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 4, + 4 + ], + "start": [ + 0, + 4 + ], + "end": [ + 4, + 0 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 4, + 0 + ], + [ + 60, + 0 + ], + [ + 60, + 2 + ], + [ + 4, + 2 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 4, + 4 + ], + "start": [ + 4, + 2 + ], + "end": [ + 2, + 4 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2, + 4 + ], + [ + 2, + 40 + ], + [ + 0, + 40 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "L", + "distance": 50, + "body_name": "Angle" + } + }, + { + "command": "sheet.convert", + "params": { + "body": "Angle", + "face": [ + 30, + 2, + 25 + ], + "rule": "R3", + "bends": [ + [ + 1.1716, + 1.1716, + 25 + ] + ] + } + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/expected.json b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/expected.json new file mode 100644 index 000000000..ec97e4585 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1285", + "tangency-labs/solidcraft#1340" + ], + "what": "an 80 x 50 x 2 plate with a 40 wide, 30 high wall on part of its front edge, converted at the wall's outside bend edge: refused because the bend's setback used up an edge of a face", + "source": "analytic", + "method": "T = 2, R = 2, K = 0.44, BD(90) = 3.4761. One 90 degree bend 40 long; the plate is 50 deep and the wall 30 high to the outer sharp, so the flat is 50 + 30 - BD = 76.524 deep: unfolded it reaches 30 - BD = 26.5239 in front of the plate's edge y = 100 and spans x 0..80, z 0..2", + "body_count": 1, + "bbox": { + "min": [ + 0, + 73.4761065788307, + 0 + ], + "max": [ + 80, + 150, + 2 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/recipe.json b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/recipe.json new file mode 100644 index 000000000..277db6a48 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "Test", + "thickness": "2 mm", + "active": true, + "bend_radius": "2 mm", + "k_factor": 0.44, + "gap": "0.5 mm" + } + }, + { + "command": "solid.box", + "params": { + "length": 80, + "width": 50, + "height": 2, + "corner": [ + 0, + 100, + 0 + ], + "body_name": "Bracket" + } + }, + { + "command": "solid.box", + "params": { + "length": 40, + "width": 2, + "height": 30, + "corner": [ + 20, + 100, + 0 + ], + "operation": "join", + "targets": [ + "Bracket" + ] + } + }, + { + "command": "sheet.convert", + "params": { + "body": "Bracket", + "face": [ + 40, + 125, + 0 + ], + "bends": [ + [ + 40, + 100, + 0 + ] + ] + } + }, + { + "command": "sheet.unfold", + "params": {} + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/expected.json b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/expected.json new file mode 100644 index 000000000..444249853 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1232", + "tangency-labs/solidcraft#1481" + ], + "what": "a 120 x 90 base with two edge flange features (bottom and left edges with a round relief, top and right edges with a square one) over a rule whose relief is a notch, unfolded", + "source": "analytic", + "method": "T = 2, R = 1, K = 0.5, BD(90) = 2*3 - pi = 2.8584; each wall's flat reaches 20 - BD = 17.1416 past the base's edge, whatever corner relief a feature chooses (the relief cuts only the corner): bbox x -17.1416..137.1416, y -17.1416..107.1416, z 0..2", + "body_count": 1, + "bbox": { + "min": [ + -17.141592653589793, + -17.141592653589793, + 0 + ], + "max": [ + 137.14159265358978, + 107.1415926535898, + 2 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/recipe.json b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/recipe.json new file mode 100644 index 000000000..eece73251 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/recipe.json @@ -0,0 +1,99 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "Sheet 2 mm", + "thickness": "2 mm", + "active": true, + "bend_radius": "1 mm", + "k_factor": 0.5, + "gap": "0.5 mm", + "corner_relief_shape": "notch" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Base" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 120, + 90 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sheet.flange", + "params": { + "type": "base", + "sketch": "Base" + } + }, + { + "command": "sheet.flange", + "params": { + "type": "edge", + "height": 20, + "angle": "90 deg", + "edges": [ + [ + 60, + 0, + 2 + ], + [ + 0, + 45, + 2 + ] + ], + "corner_relief_shape": "round", + "corner_relief": "8 mm" + } + }, + { + "command": "sheet.flange", + "params": { + "type": "edge", + "height": 20, + "angle": "90 deg", + "edges": [ + [ + 60, + 90, + 2 + ], + [ + 120, + 45, + 2 + ] + ], + "corner_relief_shape": "rectangular", + "corner_relief": "8 mm" + } + }, + { + "command": "sheet.unfold", + "params": {} + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/expected.json b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/expected.json new file mode 100644 index 000000000..b4941f3a4 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/expected.json @@ -0,0 +1,21 @@ +{ + "sources": [ + "tangency-labs/solidcraft#479" + ], + "what": "a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape round, unfolded", + "source": "analytic", + "method": "a flange of angle th, outer leg length Hf (height, from the virtual sharp along the flange) bends with allowance BA = th(R+Kt) and bend deduction BD = 2(R+t)tan(th/2) - BA; unfolded it lies in the base's plane and reaches Hf - BD beyond the base's edge. T = 2, R = 1, K = 0.5. BD(90) = 2*3 - pi = 2.8584, so the flat reaches 20 - BD = 17.1416 past each edge of the base: bbox x from -17.1416 to 137.1416, y from -17.1416 to 107.1416, z 0..2 (the base keeps its place); the corner relief changes the outline only inside the corners", + "body_count": 1, + "bbox": { + "min": [ + -17.141592653589793, + -17.141592653589793, + 0 + ], + "max": [ + 137.14159265358978, + 107.1415926535898, + 2 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/recipe.json b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/recipe.json new file mode 100644 index 000000000..a5512ce73 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/recipe.json @@ -0,0 +1,86 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "Sheet 2 mm", + "thickness": "2 mm", + "active": true, + "bend_radius": "1 mm", + "k_factor": 0.5, + "gap": "0.5 mm", + "corner_relief_shape": "round", + "corner_relief": "8 mm" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Base" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 120, + 90 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sheet.flange", + "params": { + "type": "base", + "sketch": "Base" + } + }, + { + "command": "sheet.flange", + "params": { + "type": "edge", + "height": 20, + "angle": 90, + "edges": [ + [ + 60.0, + 0, + 2 + ], + [ + 120, + 45.0, + 2 + ], + [ + 60.0, + 90, + 2 + ], + [ + 0, + 45.0, + 2 + ] + ] + } + }, + { + "command": "sheet.unfold", + "params": {} + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/expected.json b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/expected.json new file mode 100644 index 000000000..7d21f6f91 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/expected.json @@ -0,0 +1,21 @@ +{ + "sources": [ + "tangency-labs/solidcraft#488" + ], + "what": "a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape rectangular, unfolded", + "source": "analytic", + "method": "a flange of angle th, outer leg length Hf (height, from the virtual sharp along the flange) bends with allowance BA = th(R+Kt) and bend deduction BD = 2(R+t)tan(th/2) - BA; unfolded it lies in the base's plane and reaches Hf - BD beyond the base's edge. T = 2, R = 1, K = 0.5. BD(90) = 2*3 - pi = 2.8584, so the flat reaches 20 - BD = 17.1416 past each edge of the base: bbox x from -17.1416 to 137.1416, y from -17.1416 to 107.1416, z 0..2 (the base keeps its place); the corner relief changes the outline only inside the corners", + "body_count": 1, + "bbox": { + "min": [ + -17.141592653589793, + -17.141592653589793, + 0 + ], + "max": [ + 137.14159265358978, + 107.1415926535898, + 2 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/recipe.json b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/recipe.json new file mode 100644 index 000000000..5c00345c0 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/recipe.json @@ -0,0 +1,86 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "Sheet 2 mm", + "thickness": "2 mm", + "active": true, + "bend_radius": "1 mm", + "k_factor": 0.5, + "gap": "0.5 mm", + "corner_relief_shape": "rectangular", + "corner_relief": "8 mm" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Base" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 120, + 90 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sheet.flange", + "params": { + "type": "base", + "sketch": "Base" + } + }, + { + "command": "sheet.flange", + "params": { + "type": "edge", + "height": 20, + "angle": 90, + "edges": [ + [ + 60.0, + 0, + 2 + ], + [ + 120, + 45.0, + 2 + ], + [ + 60.0, + 90, + 2 + ], + [ + 0, + 45.0, + 2 + ] + ] + } + }, + { + "command": "sheet.unfold", + "params": {} + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/expected.json b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/expected.json new file mode 100644 index 000000000..4c3fed641 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/expected.json @@ -0,0 +1,24 @@ +{ + "sources": [ + "tangency-labs/solidcraft#723", + "tangency-labs/solidcraft#809", + "tangency-labs/solidcraft#1797", + "tangency-labs/solidcraft#1799" + ], + "what": "a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape tear, unfolded", + "source": "analytic", + "method": "a flange of angle th, outer leg length Hf (height, from the virtual sharp along the flange) bends with allowance BA = th(R+Kt) and bend deduction BD = 2(R+t)tan(th/2) - BA; unfolded it lies in the base's plane and reaches Hf - BD beyond the base's edge. T = 2, R = 1, K = 0.5. BD(90) = 2*3 - pi = 2.8584, so the flat reaches 20 - BD = 17.1416 past each edge of the base: bbox x from -17.1416 to 137.1416, y from -17.1416 to 107.1416, z 0..2 (the base keeps its place); the corner relief changes the outline only inside the corners", + "body_count": 1, + "bbox": { + "min": [ + -17.141592653589793, + -17.141592653589793, + 0 + ], + "max": [ + 137.14159265358978, + 107.1415926535898, + 2 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/recipe.json b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/recipe.json new file mode 100644 index 000000000..fe3f00508 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/recipe.json @@ -0,0 +1,85 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "Sheet 2 mm", + "thickness": "2 mm", + "active": true, + "bend_radius": "1 mm", + "k_factor": 0.5, + "gap": "0.5 mm", + "corner_relief_shape": "tear" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Base" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 120, + 90 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sheet.flange", + "params": { + "type": "base", + "sketch": "Base" + } + }, + { + "command": "sheet.flange", + "params": { + "type": "edge", + "height": 20, + "angle": 90, + "edges": [ + [ + 60.0, + 0, + 2 + ], + [ + 120, + 45.0, + 2 + ], + [ + 60.0, + 90, + 2 + ], + [ + 0, + 45.0, + 2 + ] + ] + } + }, + { + "command": "sheet.unfold", + "params": {} + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/expected.json b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/expected.json new file mode 100644 index 000000000..2278ee401 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/expected.json @@ -0,0 +1,24 @@ +{ + "sources": [ + "tangency-labs/solidcraft#647", + "tangency-labs/solidcraft#725", + "tangency-labs/solidcraft#1285", + "tangency-labs/solidcraft#1340" + ], + "what": "a 100 x 60 x 30 box shelled to 2 mm, converted to sheet metal by its four bottom edges and unfolded", + "source": "analytic", + "method": "T = 2, R = 2, K = 0.44: BD(90) = 2*4 - (pi/2)(2 + 0.88) = 3.4761. The walls' outer legs are 30 long, so the flat reaches 30 - BD = 26.5239 past each edge of the 100 x 60 base (flat 160 - 2*BD = 153.048 by 113.048); the base keeps its place z 0..2", + "body_count": 1, + "bbox": { + "min": [ + -26.523893421169305, + -26.523893421169305, + 0 + ], + "max": [ + 126.5238934211693, + 86.5238934211693, + 2 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/recipe.json b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/recipe.json new file mode 100644 index 000000000..9d15158bb --- /dev/null +++ b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/recipe.json @@ -0,0 +1,77 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "Rule", + "thickness": "2 mm", + "active": true, + "bend_radius": "2 mm", + "k_factor": 0.44 + } + }, + { + "command": "solid.box", + "params": { + "length": 100, + "width": 60, + "height": 30, + "body_name": "Tray" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 50, + 30, + 30 + ] + ], + "thickness": 2 + } + }, + { + "command": "sheet.convert", + "params": { + "body": "Tray", + "face": [ + 50, + 30, + 0 + ], + "bends": [ + [ + 50, + 0, + 0 + ], + [ + 100, + 30, + 0 + ], + [ + 50, + 60, + 0 + ], + [ + 0, + 30, + 0 + ] + ] + } + }, + { + "command": "sheet.unfold", + "params": {} + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/expected.json b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/expected.json new file mode 100644 index 000000000..60ba07fc3 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/expected.json @@ -0,0 +1,21 @@ +{ + "sources": [ + "tangency-labs/solidcraft#839" + ], + "what": "a 200 x 100 plate with its corners rounded 8 and one 40 mm inside flange on its bottom edge, unfolded: the trim made the outline's arcs chords", + "source": "analytic", + "method": "T = 2, R = 1, K = 0.5, BD(90) = 2.8584: the flat reaches 40 - BD = 37.1416 below the plate's bottom edge; the plate itself spans x 0..200 up to y = 100 (its top corners are the rounded ones); z 0..2", + "body_count": 1, + "bbox": { + "min": [ + 0, + -37.1415926535898, + 0 + ], + "max": [ + 200, + 100, + 2 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/recipe.json b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/recipe.json new file mode 100644 index 000000000..c6f6871e5 --- /dev/null +++ b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/recipe.json @@ -0,0 +1,183 @@ +{ + "commands": [ + { + "command": "sheet.manage_rules", + "params": { + "name": "Steel 2", + "thickness": "2 mm", + "active": true, + "bend_radius": "1 mm", + "k_factor": 0.5 + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Plate" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8, + 0 + ], + [ + 192, + 0 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 192, + 0 + ], + "end": [ + 200, + 8 + ], + "through": [ + 197.6568542495, + 2.3431457505 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 200, + 8 + ], + [ + 200, + 92 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 200, + 92 + ], + "end": [ + 192, + 100 + ], + "through": [ + 197.6568542495, + 97.6568542495 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 192, + 100 + ], + [ + 8, + 100 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 8, + 100 + ], + "end": [ + 0, + 92 + ], + "through": [ + 2.3431457505, + 97.6568542495 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 92 + ], + [ + 0, + 8 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 0, + 8 + ], + "end": [ + 8, + 0 + ], + "through": [ + 2.3431457505, + 2.3431457505 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sheet.flange", + "params": { + "type": "base", + "sketch": "Plate" + } + }, + { + "command": "sheet.flange", + "params": { + "edges": [ + [ + 100, + 0, + 2 + ] + ], + "height": 40, + "angle": 90, + "position": "inside" + } + }, + { + "command": "sheet.unfold", + "params": {} + }, + { + "command": "inspect.measure", + "params": {} + } + ] +} \ No newline at end of file