diff --git a/docs/kernel-ladder.md b/docs/kernel-ladder.md index d3887ee66..b1e48ec81 100644 --- a/docs/kernel-ladder.md +++ b/docs/kernel-ladder.md @@ -9,16 +9,16 @@ The **frontier** is the first case of a tier, in ladder order, that fails (fail, | Tier | What | Cases | Results | Frontier | |---|---|---|---|---| | 01-primitives | primitives with closed-form volumes | 6 | 6 pass | – | -| 02-booleans | booleans in the degeneracy classes, and cuts that end in a single line | 20 | 1 fail, 19 pass | 018-hole-tangent-to-side-face | -| 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 9 | 9 pass | – | -| 04-spline-profiles | spline profiles, sweeps and lofts | 10 | 10 pass | – | -| 05-holes-and-taps | holes and tapped holes | 13 | 1 fail, 12 pass | 010-hole-tangent-to-end-face | -| 06-threads | modelled threads | 10 | 1 fail, 7 pass, 2 unsupported | 006-external-m10-into-chamfer | -| 07-fillets | constant, variable and corner fillets | 17 | 3 fail, 12 pass, 2 unsupported | 012-variable-into-rounded-corner | -| 08-chamfers | chamfers | 8 | 1 fail, 7 pass | 008-part-chamfers | -| 09-shells-and-offsets | shells and offsets | 11 | 2 fail, 9 pass | 010-shell-under-rounded-top | -| 10-patterns-and-mirrors | patterns and mirrors | 8 | 1 fail, 7 pass | 008-part-vents | -| 11-cumulative-parts | parts combining every tier | 4 | 3 fail, 1 pass | 002-flange | +| 02-booleans | booleans in the degeneracy classes, and cuts that end in a single line | 25 | 25 pass | – | +| 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 10 | 10 pass | – | +| 04-spline-profiles | spline profiles, sweeps and lofts | 12 | 12 pass | – | +| 05-holes-and-taps | holes and tapped holes | 13 | 13 pass | – | +| 06-threads | modelled threads | 10 | 8 pass, 2 unsupported | – | +| 07-fillets | constant, variable and corner fillets | 17 | 1 fail, 14 pass, 2 unsupported | 016-corner-three-sequential-r5-r3-r7 | +| 08-chamfers | chamfers | 8 | 8 pass | – | +| 09-shells-and-offsets | shells and offsets | 15 | 15 pass | – | +| 10-patterns-and-mirrors | patterns and mirrors | 8 | 8 pass | – | +| 11-cumulative-parts | parts combining every tier | 4 | 4 pass | – | Cases where SMLib's check gave no verdict on a body (SMLib can't take the record yet), so only the record's checks graded validity: 0. @@ -28,119 +28,131 @@ Times are the commands' own, in seconds, from the case's process; **golden** is | Case | What | Answer | Result | s | golden s | changes | |---|---|---|---|---|---|---| -| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.003 | – | status was unsupported | -| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.031 | – | status was unsupported | -| ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.035 | – | status was unsupported | -| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.028 | – | status was unsupported | -| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.009 | – | status was unsupported | -| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 1.466 | – | status was unsupported | -| ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.010 | – | status was unsupported | -| ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.011 | – | status was unsupported | -| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.007 | – | status was unsupported | -| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.007 | – | status was unsupported | -| ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.007 | – | status was unsupported | -| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.007 | – | status was unsupported | -| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.063 | – | status was unsupported | -| ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.007 | – | status was unsupported | -| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.032 | – | status was unsupported | -| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.009 | – | status was unsupported | -| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.042 | – | status was unsupported | -| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | **FAIL**: measure Part: the operation failed: not supported yet: tessellation: face 4 (plane): boundary crosses itself (want measurable); body_count 0 (want 1); volume_mm3 0 (want 41716.814693) | 0.068 | – | status was unsupported | -| ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.034 | – | status was unsupported | -| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.031 | – | status was unsupported | -| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.032 | – | status was unsupported | -| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.032 | – | status was unsupported | -| ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.060 | – | status was unsupported | -| ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.094 | – | status was unsupported | -| ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.024 | – | status was unsupported | -| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.103 | – | status was unsupported | -| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.016 | – | status was unsupported | -| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.043 | – | status was unsupported | -| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.017 | – | status was unsupported | -| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.020 | – | status was unsupported | -| ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.057 | – | status was unsupported | -| ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.055 | – | status was unsupported | -| ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.013 | – | status was unsupported | -| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.085 | – | status was unsupported | -| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.148 | – | status was unsupported | -| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.010 | – | status was unsupported | -| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.018 | – | status was unsupported | -| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.039 | – | status was unsupported | -| ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | invariants | pass | 0.059 | – | status was unsupported | -| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.005 | – | status was unsupported | -| ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | invariants | pass | 0.021 | – | status was unsupported | -| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.034 | – | status was unsupported | -| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.092 | – | status was unsupported | -| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.115 | – | status was unsupported | -| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.212 | – | status was unsupported | -| ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | **FAIL**: measure Part: the operation failed: not supported yet: tessellation: face 4 (plane): triangulation does not (want measurable); body_count 0 (want 1); volume_mm3 0 (want 46429.203673) | 0.055 | – | status was unsupported | -| ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.062 | – | status was unsupported | -| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.045 | – | status was unsupported | -| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.045 | – | status was unsupported | -| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.038 | – | status was unsupported | -| ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.121 | – | status was unsupported | -| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.064 | – | status was unsupported | -| ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.073 | – | status was unsupported | -| ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.140 | – | status was unsupported | -| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.134 | – | status was unsupported | -| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.244 | – | status was unsupported | -| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.128 | – | status was unsupported | -| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.604 | – | status was unsupported | -| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm: it stops square in the middle of the face | invariants | pass | 1.146 | – | status was unsupported | -| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 1.392 | – | status was unsupported | -| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder | invariants | pass | 2.444 | – | status was unsupported | -| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 2.593 | – | status was unsupported | -| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | **FAIL**: record_valid geometry: portable B-rep: face 25 loop 0 use 1: pcurve middle lifts off its edge's curve by 0.000045 (want ok) | 2.764 | – | status was unsupported | -| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 4.590 | – | status was unsupported | -| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 1.482 | – | status was unsupported | -| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet | invariants | pass | 2.568 | – | status was unsupported | +| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.002 | 0.002 | | +| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.005 | 0.005 | | +| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.014 | 0.014 | | +| ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.016 | 0.016 | | +| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.028 | 0.028 | | +| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.463 | 0.463 | | +| ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.006 | 0.006 | | +| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.007 | 0.007 | | +| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.011 | 0.011 | | +| ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.012 | 0.012 | | +| ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.012 | 0.012 | | +| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.013 | 0.013 | | +| ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.013 | 0.013 | | +| ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.013 | 0.013 | | +| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.013 | 0.013 | | +| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.016 | 0.016 | | +| ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.016 | 0.016 | | +| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.019 | 0.019 | | +| ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.023 | 0.023 | | +| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.026 | 0.026 | | +| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.026 | 0.026 | | +| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.030 | 0.030 | | +| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.035 | 0.035 | | +| ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.035 | 0.035 | | +| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.039 | 0.039 | | +| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.043 | 0.043 | | +| ladder/02-booleans/022-cylinder-grazing-a-hole-edge | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | 0.060 | 0.060 | | +| ladder/02-booleans/021-holes-touching-at-a-point | two through holes r5 whose circles touch at one point (30, 20) | analytic | pass | 0.067 | 0.067 | | +| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.108 | 0.108 | | +| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.176 | 0.176 | | +| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.036 | 1.036 | | +| ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.009 | 0.009 | | +| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.012 | 0.012 | | +| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.014 | 0.014 | | +| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.016 | 0.016 | | +| ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.033 | 0.033 | | +| ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.034 | 0.034 | | +| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.039 | 0.039 | | +| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.065 | 0.065 | | +| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.072 | 0.072 | | +| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.074 | 0.074 | | +| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.008 | 0.008 | | +| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.009 | 0.009 | | +| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.014 | 0.014 | | +| ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | invariants | pass | 0.029 | 0.029 | | +| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.031 | 0.031 | | +| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.037 | 0.037 | | +| ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | invariants | pass | 0.039 | 0.039 | | +| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.079 | 0.079 | | +| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.081 | 0.081 | | +| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.095 | 0.095 | | +| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.499 | 0.499 | | +| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.130 | 1.130 | | +| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.017 | 0.017 | | +| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.018 | 0.018 | | +| ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | pass | 0.019 | 0.019 | | +| ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.023 | 0.023 | | +| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.024 | 0.024 | | +| ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.025 | 0.025 | | +| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.030 | 0.030 | | +| ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.049 | 0.049 | | +| ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.061 | 0.061 | | +| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.064 | 0.064 | | +| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.068 | 0.068 | | +| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.072 | 0.072 | | +| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.235 | 0.235 | | +| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm: it stops square in the middle of the face | invariants | pass | 0.622 | 0.622 | | +| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.660 | 0.660 | | +| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 0.726 | 0.726 | | +| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder | invariants | pass | 1.219 | 1.219 | | +| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet | invariants | pass | 1.231 | 1.231 | | +| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.337 | 1.337 | | +| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.390 | 1.390 | | +| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.362 | 2.362 | | | ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) | invariants | not supported yet: solid.thread has no start count: multi-start threads | – | – | | | ladder/06-threads/009-thread-runout-length | an M10 thread that vanishes over a 2-pitch runout before a shoulder | invariants | not supported yet: solid.thread has no runout (vanishing thread) length | – | – | | -| ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.018 | – | status was unsupported | -| ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.018 | – | status was unsupported | -| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | – | status was unsupported | -| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.005 | – | | -| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.012 | – | status was unsupported | -| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.025 | – | status was unsupported | -| ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.012 | – | status was unsupported | -| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | **FAIL**: step 3 (solid.fillet): SMLib variable fillet: operation: SMLib failed (status 1001) | 0.020 | – | status was unsupported | -| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.113 | – | status was unsupported | -| ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | invariants | pass | 0.017 | – | status was unsupported | -| ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.028 | – | status was unsupported | -| ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.025 | – | status was unsupported | -| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.042 | – | status was unsupported | -| ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.090 | – | status was unsupported | -| ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them | invariants | **FAIL**: step 4 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.051 | – | status was unsupported | -| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.986 | – | status was unsupported | +| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.003 | 0.003 | | +| ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.007 | 0.007 | | +| ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.009 | 0.009 | | +| ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | invariants | pass | 0.010 | 0.010 | | +| ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.011 | 0.011 | | +| ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.012 | 0.012 | | +| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.012 | 0.012 | | +| ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.014 | 0.014 | | +| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | 0.018 | | +| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.019 | 0.019 | | +| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.020 | 0.020 | | +| ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them | invariants | **FAIL**: step 4 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) | 0.026 | 0.026 | | +| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.030 | 0.030 | | +| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | | +| ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.044 | 0.044 | | +| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.389 | 0.389 | | | ladder/07-fillets/013-corner-setback | three r5 rounds at a corner with setbacks of 8 mm along each edge | invariants | not supported yet: solid.fillet has no corner setback distances | – | – | | -| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.009 | – | status was unsupported | -| ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.010 | – | status was unsupported | -| ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.010 | – | status was unsupported | -| ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.014 | – | status was unsupported | -| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.015 | – | status was unsupported | -| ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | invariants | pass | 0.029 | – | status was unsupported | -| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.117 | – | status was unsupported | -| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.999 | – | status was unsupported | -| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.016 | – | status was unsupported | -| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.017 | – | status was unsupported | -| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.021 | – | status was unsupported | -| ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.015 | – | status was unsupported | -| ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.044 | – | status was unsupported | -| ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.155 | – | status was unsupported | -| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.160 | – | status was unsupported | -| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.063 | – | status was unsupported | -| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.164 | – | status was unsupported | -| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | **FAIL**: step 3 (solid.shell): SMLib shell: SMLib's check refuses the result: 1 failed tests: SmBSplineCurve::Test #13 Bad CurveCusp: 2D BSplineCurve Warning: Extremely | 0.179 | – | status was unsupported | -| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.998 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.037 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.126 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.138 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.572 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.836 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 1.322 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 2.310 | – | status was unsupported | -| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.978 | – | status was unsupported | -| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | **FAIL**: step 7 (solid.chamfer): SMLib chamfer: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 1.244 | – | status was unsupported | -| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.153 | – | status was unsupported | -| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | **FAIL**: step 7 (solid.chamfer): SMLib chamfer: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 1.171 | – | status was unsupported | -| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.913 | – | status was unsupported | +| ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.006 | 0.006 | | +| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.007 | 0.007 | | +| ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.008 | 0.008 | | +| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.010 | 0.010 | | +| ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.012 | 0.012 | | +| ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | invariants | pass | 0.027 | 0.027 | | +| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | | +| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.519 | 0.519 | | +| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.009 | 0.009 | | +| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.009 | 0.009 | | +| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.009 | 0.009 | | +| ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.017 | 0.017 | | +| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.017 | 0.017 | | +| ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.031 | 0.031 | | +| ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.040 | 0.040 | | +| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.042 | 0.042 | | +| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.054 | 0.054 | | +| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.090 | 0.090 | | +| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.090 | 0.090 | | +| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.098 | 0.098 | | +| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.123 | 0.123 | | +| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.692 | 0.692 | | +| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.868 | 0.868 | | +| ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.017 | 0.017 | | +| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.036 | 0.036 | | +| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.039 | 0.039 | | +| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.155 | 0.155 | | +| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.244 | 0.244 | | +| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.353 | 0.353 | | +| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.670 | 0.670 | | +| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.469 | 1.469 | | +| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.071 | 0.071 | | +| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.503 | 0.503 | | +| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.769 | 1.769 | | +| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.096 | 2.096 | | diff --git a/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/expected.json b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/expected.json new file mode 100644 index 000000000..1cb77a605 --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [], + "what": "two through holes r5 whose circles touch at one point (30, 20)", + "source": "analytic", + "method": "V = 60 40 20 - 2 pi 5^2 20; faces: 6 of the box + 2 bores (top and bottom each one loop round both holes, through their common vertex twice)", + "body_count": 1, + "volume_mm3": 44858.407346410204, + "faces": 8 +} diff --git a/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/recipe.json b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/recipe.json new file mode 100644 index 000000000..4f9583a37 --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/recipe.json @@ -0,0 +1,31 @@ +{ + "base": "../../01-primitives/001-box", + "commands": [ + { + "command": "solid.cylinder", + "params": { + "base": [ + 25, + 20, + -1 + ], + "radius": 5, + "height": 22, + "operation": "cut" + } + }, + { + "command": "solid.cylinder", + "params": { + "base": [ + 35, + 20, + -1 + ], + "radius": 5, + "height": 22, + "operation": "cut" + } + } + ] +} diff --git a/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/expected.json b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/expected.json new file mode 100644 index 000000000..14b3f374c --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#1279" + ], + "what": "a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result'", + "source": "analytic", + "method": "part 12x12x5.1 = 734.4 minus the hole pi*1.6^2*4.1 = 32.97 (hole z -4..0.1, part top z 0.1). The tool (z -3.9..3.2, the square 1.5x1.5 where r >= 1.5) overlaps solid only where r >= 1.6: area A1 = integral_0^1.5 (1.5 - min(1.5, sqrt(2.56-x^2))) dx = 0.31409, over the 4.0 mm of shared z: 1.25638 mm3 (the 0.0003 offset moves this by about 3e-3). V = 734.4 - 32.9662 - 1.2564 = 700.1695. Reduced from the report's STEP geometry (no pocket or rotation); the answer is for this geometry", + "body_count": 1, + "volume_mm3": 700.1694662079215 +} diff --git a/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/recipe.json b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/recipe.json new file mode 100644 index 000000000..a47186fda --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + -6, + -6, + -5 + ], + "length": 12, + "width": 12, + "height": 5.1, + "body_name": "Part" + } + }, + { + "command": "solid.cylinder", + "params": { + "base": [ + 0, + 0, + -4 + ], + "radius": 1.6, + "height": 4.1, + "operation": "cut" + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + -3.9 + ], + "length": 1.5, + "width": 1.5, + "height": 7.1, + "operation": "new", + "body_name": "Tool" + } + }, + { + "command": "solid.cylinder", + "params": { + "base": [ + 0.0003, + 0, + -4 + ], + "radius": 1.5, + "height": 7.5, + "operation": "cut", + "targets": [ + "Tool" + ] + } + }, + { + "command": "solid.combine", + "params": { + "target": "Part", + "tools": [ + "Tool" + ], + "operation": "cut" + } + } + ] +} diff --git a/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/expected.json b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/expected.json new file mode 100644 index 000000000..6f05969b5 --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#2928" + ], + "what": "two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction", + "source": "analytic", + "method": "base area = 2 straight rails (2 x 20) x 2 + full annulus pi(25-9) = 80 + 16 pi, times 2 mm = 160 + 32 pi. Each lip is a half annulus pi(25-16)/2 = 4.5 pi, two lips x 18 mm = 162 pi. The lips sit above z=2, the base is below, so nothing overlaps (the crescent overhang is above z=2 too): V = 160 + 194 pi = 769.469. One body", + "body_count": 1, + "volume_mm3": 769.4689747964198 +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/recipe.json b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/recipe.json new file mode 100644 index 000000000..defab27cd --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/recipe.json @@ -0,0 +1,285 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Base" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 5, + -10 + ], + [ + 5, + 10 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0, + 10 + ], + "start": [ + 5, + 10 + ], + "sweep": 180 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -5, + 10 + ], + [ + -5, + -10 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0, + -10 + ], + "start": [ + -5, + -10 + ], + "sweep": 180 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 3, + -10 + ], + [ + 3, + 10 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0, + 10 + ], + "start": [ + 3, + 10 + ], + "sweep": 180 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -3, + 10 + ], + [ + -3, + -10 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0, + -10 + ], + "start": [ + -3, + -10 + ], + "sweep": 180 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Base", + "profiles": [ + { + "point": [ + 4, + 0 + ] + } + ], + "distance": 2, + "operation": "new", + "body_name": "Base" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": 2, + "name": "Lips" + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0.0001, + 10 + ], + "start": [ + 5.0001, + 10 + ], + "sweep": 180 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -4.9999, + 10 + ], + [ + -3.9999, + 10 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0.0001, + 10 + ], + "start": [ + -3.9999, + 10 + ], + "sweep": -180 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 4.0001, + 10 + ], + [ + 5.0001, + 10 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + -0.0001, + -10 + ], + "start": [ + -5.0001, + -10 + ], + "sweep": 180 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 4.9999, + -10 + ], + [ + 3.9999, + -10 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + -0.0001, + -10 + ], + "start": [ + 3.9999, + -10 + ], + "sweep": -180 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -4.0001, + -10 + ], + [ + -5.0001, + -10 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Lips", + "distance": 18, + "operation": "join", + "profiles": "all" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/expected.json b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/expected.json new file mode 100644 index 000000000..ae9e52051 --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#726", + "tangency-labs/solidcraft#494", + "tangency-labs/solidcraft#2114" + ], + "what": "the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: \"the selected planar face no longer exists\")", + "source": "analytic", + "method": "hub = revolve of (8,0) (30,0) (30,6) (18,6) (18,22) (8,22) about Z: V = pi [(30^2 - 8^2) 6 + (18^2 - 8^2) 16] = 28826.6. Extruding the whole annulus z = 6, r 18..30 outward (upward) 5 mm adds pi (30^2 - 18^2) 5 = 9047.8 (the new ring sits on the flange and touches the hub wall r = 18).", + "body_count": 1, + "volume_mm3": 37875.04103167855 +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/recipe.json b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/recipe.json new file mode 100644 index 000000000..ffb458854 --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/recipe.json @@ -0,0 +1,85 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8, + 0 + ], + [ + 30, + 0 + ], + [ + 30, + 6 + ], + [ + 18, + 6 + ], + [ + 18, + 22 + ], + [ + 8, + 22 + ] + ], + "infer": false, + "closed": true + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "Z", + "angle": "360 deg", + "operation": "new", + "body_name": "Hub" + } + }, + { + "command": "solid.extrude", + "params": { + "face": [ + 12, + 20.784609690826528, + 6 + ], + "distance": 5, + "operation": "join" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/expected.json b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/expected.json new file mode 100644 index 000000000..7a99b89cd --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#5197", + "tangency-labs/solidcraft#3396" + ], + "what": "a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid", + "source": "analytic", + "method": "the layers only meet face to face, so V is their sum: Body1 = pi 37^2 1.2 + (pi 37^2 - the four bands y -29..-24, -13..-8, 8..11, 24..27 of the disc, Int 2 sqrt(37^2 - y^2) dy) 2.4; Body2 = pi (37^2-35^2) 2; Body3 = pi 37^2 2.4. The bands run out to the rim, so the space inside r35 under Body1 opens to the outside: one shell (the reporter's 52-command script, generic dimensions)", + "body_count": 1, + "shells": 1, + "volume_mm3": 24340.9358 +} diff --git a/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/recipe.json b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/recipe.json new file mode 100644 index 000000000..246440cc4 --- /dev/null +++ b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/recipe.json @@ -0,0 +1,792 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "S1" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 37 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -18.57417562100671, + -32 + ], + [ + 18.57417562100671, + -32 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -22.978250586152114, + -29 + ], + [ + 22.978250586152114, + -29 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -28.160255680657446, + -24 + ], + [ + 28.160255680657446, + -24 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -30.463092423455635, + -21 + ], + [ + 30.463092423455635, + -21 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -33.36165463522455, + -16 + ], + [ + 33.36165463522455, + -16 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -34.64101615137755, + -13 + ], + [ + 34.64101615137755, + -13 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.124783736376884, + -8 + ], + [ + 36.124783736376884, + -8 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.66060555964672, + -5 + ], + [ + 36.66060555964672, + -5 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -37.0, + 0 + ], + [ + 37.0, + 0 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.87817782917155, + 3 + ], + [ + 36.87817782917155, + 3 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.124783736376884, + 8 + ], + [ + 36.124783736376884, + 8 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -35.32704346531139, + 11 + ], + [ + 35.32704346531139, + 11 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -33.36165463522455, + 16 + ], + [ + 33.36165463522455, + 16 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -31.74901573277509, + 19 + ], + [ + 31.74901573277509, + 19 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -28.160255680657446, + 24 + ], + [ + 28.160255680657446, + 24 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -25.298221281347036, + 27 + ], + [ + 25.298221281347036, + 27 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -18.57417562100671, + 32 + ], + [ + 18.57417562100671, + 32 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -12.0, + 35 + ], + [ + 12.0, + 35 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "S3" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 37 + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -18.57417562100671, + -32 + ], + [ + 18.57417562100671, + -32 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -22.978250586152114, + -29 + ], + [ + 22.978250586152114, + -29 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -28.160255680657446, + -24 + ], + [ + 28.160255680657446, + -24 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -30.463092423455635, + -21 + ], + [ + 30.463092423455635, + -21 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -33.36165463522455, + -16 + ], + [ + 33.36165463522455, + -16 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -34.64101615137755, + -13 + ], + [ + 34.64101615137755, + -13 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.124783736376884, + -8 + ], + [ + 36.124783736376884, + -8 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.66060555964672, + -5 + ], + [ + 36.66060555964672, + -5 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -37.0, + 0 + ], + [ + 37.0, + 0 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.87817782917155, + 3 + ], + [ + 36.87817782917155, + 3 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -36.124783736376884, + 8 + ], + [ + 36.124783736376884, + 8 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -35.32704346531139, + 11 + ], + [ + 35.32704346531139, + 11 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -33.36165463522455, + 16 + ], + [ + 33.36165463522455, + 16 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -31.74901573277509, + 19 + ], + [ + 31.74901573277509, + 19 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -28.160255680657446, + 24 + ], + [ + 28.160255680657446, + 24 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -25.298221281347036, + 27 + ], + [ + 25.298221281347036, + 27 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -18.57417562100671, + 32 + ], + [ + 18.57417562100671, + 32 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -12.0, + 35 + ], + [ + 12.0, + 35 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Rings" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 37 + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 35 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Rings", + "profiles": "all", + "distance": 1.2, + "direction": "negative", + "body_name": "Body1" + } + }, + { + "command": "solid.extrude", + "params": { + "sketch": "S1", + "profiles": [ + { + "point": [ + 0, + -34.5 + ] + }, + { + "point": [ + 0, + -30.5 + ] + }, + { + "point": [ + 0, + -22.5 + ] + }, + { + "point": [ + 0, + -18.5 + ] + }, + { + "point": [ + 0, + -14.5 + ] + }, + { + "point": [ + 0, + -6.5 + ] + }, + { + "point": [ + 0, + -2.5 + ] + }, + { + "point": [ + 0, + 1.5 + ] + }, + { + "point": [ + 0, + 5.5 + ] + }, + { + "point": [ + 0, + 13.5 + ] + }, + { + "point": [ + 0, + 17.5 + ] + }, + { + "point": [ + 0, + 21.5 + ] + }, + { + "point": [ + 0, + 29.5 + ] + }, + { + "point": [ + 0, + 33.5 + ] + }, + { + "point": [ + 0, + 36.0 + ] + } + ], + "distance": 2.4, + "direction": "negative", + "from": [ + 0, + 0, + -1.2 + ], + "operation": "join" + } + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Rings", + "profiles": [ + { + "point": [ + 36, + 0 + ] + } + ], + "distance": 2, + "direction": "negative", + "from": [ + 36, + 0, + -3.6 + ], + "operation": "new", + "body_name": "Body2" + } + }, + { + "command": "solid.extrude", + "params": { + "sketch": "S3", + "profiles": "all", + "distance": 2.4, + "direction": "negative", + "from": [ + 36, + 0, + -5.6 + ], + "operation": "new", + "body_name": "Body3" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Body2", + "tools": [ + "Body3" + ], + "operation": "join" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Body1", + "tools": [ + "Body2" + ], + "operation": "join" + } + } + ] +} diff --git a/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/expected.json b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/expected.json new file mode 100644 index 000000000..b9b665fb6 --- /dev/null +++ b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4007" + ], + "what": "the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees", + "source": "analytic", + "method": "Pappus: the half disc (the side away from the axis) has area pi 14^2 / 2 and centroid at 14 + 4 * 14 / (3 pi) from the axis: V = (270/360) 2 pi (14 + 4*14/(3 pi)) pi 14^2 / 2 = 28932.2 (the design measures 28930.7).", + "body_count": 1, + "volume_mm3": 28932.17609889229 +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/recipe.json b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/recipe.json new file mode 100644 index 000000000..42b612d7a --- /dev/null +++ b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/recipe.json @@ -0,0 +1,72 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0.0, + 0.0, + 0.0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "P" + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 14, + 0 + ], + "start": [ + 14, + -14 + ], + "end": [ + 14, + 14 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14, + 14 + ], + [ + 14, + -14 + ] + ], + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "Z", + "angle": "270 deg", + "operation": "new" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/expected.json b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/expected.json new file mode 100644 index 000000000..f44f64de6 --- /dev/null +++ b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4623", + "tangency-labs/solidcraft#4180", + "tangency-labs/solidcraft#4881" + ], + "what": "a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result", + "source": "invariants", + "method": "the narrowing cone skin and the flaring lip skin cross at z = -0.3, so their union is one connected solid: one valid closed body, no panic. The reporter's own script (pleated_union.py, 24 pleats)", + "body_count": 1 +} diff --git a/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/recipe.json b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/recipe.json new file mode 100644 index 000000000..080ca8c3b --- /dev/null +++ b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/recipe.json @@ -0,0 +1,1802 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "-1", + "name": "ConeLo" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 115.7949, + 0.0 + ], + [ + 112.5082, + 14.812 + ], + [ + 111.8493, + 29.9699 + ], + [ + 104.8409, + 43.4265 + ], + [ + 100.2813, + 57.8974 + ], + [ + 90.0289, + 69.0816 + ], + [ + 81.8793, + 81.8793 + ], + [ + 69.0816, + 90.0289 + ], + [ + 57.8974, + 100.2813 + ], + [ + 43.4265, + 104.8409 + ], + [ + 29.9699, + 111.8493 + ], + [ + 14.812, + 112.5082 + ], + [ + 0.0, + 115.7949 + ], + [ + -14.812, + 112.5082 + ], + [ + -29.9699, + 111.8493 + ], + [ + -43.4265, + 104.8409 + ], + [ + -57.8974, + 100.2813 + ], + [ + -69.0816, + 90.0289 + ], + [ + -81.8793, + 81.8793 + ], + [ + -90.0289, + 69.0816 + ], + [ + -100.2813, + 57.8974 + ], + [ + -104.8409, + 43.4265 + ], + [ + -111.8493, + 29.9699 + ], + [ + -112.5082, + 14.812 + ], + [ + -115.7949, + 0.0 + ], + [ + -112.5082, + -14.812 + ], + [ + -111.8493, + -29.9699 + ], + [ + -104.8409, + -43.4265 + ], + [ + -100.2813, + -57.8974 + ], + [ + -90.0289, + -69.0816 + ], + [ + -81.8793, + -81.8793 + ], + [ + -69.0816, + -90.0289 + ], + [ + -57.8974, + -100.2813 + ], + [ + -43.4265, + -104.8409 + ], + [ + -29.9699, + -111.8493 + ], + [ + -14.812, + -112.5082 + ], + [ + -0.0, + -115.7949 + ], + [ + 14.812, + -112.5082 + ], + [ + 29.9699, + -111.8493 + ], + [ + 43.4265, + -104.8409 + ], + [ + 57.8974, + -100.2813 + ], + [ + 69.0816, + -90.0289 + ], + [ + 81.8793, + -81.8793 + ], + [ + 90.0289, + -69.0816 + ], + [ + 100.2813, + -57.8974 + ], + [ + 104.8409, + -43.4265 + ], + [ + 111.8493, + -29.9699 + ], + [ + 112.5082, + -14.812 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "88.3", + "name": "ConeHi" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.39, + 0.0 + ], + [ + 13.9816, + 1.8407 + ], + [ + 13.8997, + 3.7244 + ], + [ + 13.0287, + 5.3967 + ], + [ + 12.4621, + 7.195 + ], + [ + 11.188, + 8.5849 + ], + [ + 10.1753, + 10.1753 + ], + [ + 8.5849, + 11.188 + ], + [ + 7.195, + 12.4621 + ], + [ + 5.3967, + 13.0287 + ], + [ + 3.7244, + 13.8997 + ], + [ + 1.8407, + 13.9816 + ], + [ + 0.0, + 14.39 + ], + [ + -1.8407, + 13.9816 + ], + [ + -3.7244, + 13.8997 + ], + [ + -5.3967, + 13.0287 + ], + [ + -7.195, + 12.4621 + ], + [ + -8.5849, + 11.188 + ], + [ + -10.1753, + 10.1753 + ], + [ + -11.188, + 8.5849 + ], + [ + -12.4621, + 7.195 + ], + [ + -13.0287, + 5.3967 + ], + [ + -13.8997, + 3.7244 + ], + [ + -13.9816, + 1.8407 + ], + [ + -14.39, + 0.0 + ], + [ + -13.9816, + -1.8407 + ], + [ + -13.8997, + -3.7244 + ], + [ + -13.0287, + -5.3967 + ], + [ + -12.4621, + -7.195 + ], + [ + -11.188, + -8.5849 + ], + [ + -10.1753, + -10.1753 + ], + [ + -8.5849, + -11.188 + ], + [ + -7.195, + -12.4621 + ], + [ + -5.3967, + -13.0287 + ], + [ + -3.7244, + -13.8997 + ], + [ + -1.8407, + -13.9816 + ], + [ + -0.0, + -14.39 + ], + [ + 1.8407, + -13.9816 + ], + [ + 3.7244, + -13.8997 + ], + [ + 5.3967, + -13.0287 + ], + [ + 7.195, + -12.4621 + ], + [ + 8.5849, + -11.188 + ], + [ + 10.1753, + -10.1753 + ], + [ + 11.188, + -8.5849 + ], + [ + 12.4621, + -7.195 + ], + [ + 13.0287, + -5.3967 + ], + [ + 13.8997, + -3.7244 + ], + [ + 13.9816, + -1.8407 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.loft", + "params": { + "sections": [ + { + "sketch": "ConeLo" + }, + { + "sketch": "ConeHi" + } + ], + "operation": "new", + "body_name": "Cone", + "name": "Cone" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "-2", + "name": "ConeInLo" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 115.8304, + 0.0 + ], + [ + 112.5209, + 14.8137 + ], + [ + 111.8836, + 29.9791 + ], + [ + 104.8528, + 43.4314 + ], + [ + 100.3121, + 57.9152 + ], + [ + 90.0391, + 69.0894 + ], + [ + 81.9045, + 81.9045 + ], + [ + 69.0894, + 90.0391 + ], + [ + 57.9152, + 100.3121 + ], + [ + 43.4314, + 104.8528 + ], + [ + 29.9791, + 111.8836 + ], + [ + 14.8137, + 112.5209 + ], + [ + 0.0, + 115.8304 + ], + [ + -14.8137, + 112.5209 + ], + [ + -29.9791, + 111.8836 + ], + [ + -43.4314, + 104.8528 + ], + [ + -57.9152, + 100.3121 + ], + [ + -69.0894, + 90.0391 + ], + [ + -81.9045, + 81.9045 + ], + [ + -90.0391, + 69.0894 + ], + [ + -100.3121, + 57.9152 + ], + [ + -104.8528, + 43.4314 + ], + [ + -111.8836, + 29.9791 + ], + [ + -112.5209, + 14.8137 + ], + [ + -115.8304, + 0.0 + ], + [ + -112.5209, + -14.8137 + ], + [ + -111.8836, + -29.9791 + ], + [ + -104.8528, + -43.4314 + ], + [ + -100.3121, + -57.9152 + ], + [ + -90.0391, + -69.0894 + ], + [ + -81.9045, + -81.9045 + ], + [ + -69.0894, + -90.0391 + ], + [ + -57.9152, + -100.3121 + ], + [ + -43.4314, + -104.8528 + ], + [ + -29.9791, + -111.8836 + ], + [ + -14.8137, + -112.5209 + ], + [ + -0.0, + -115.8304 + ], + [ + 14.8137, + -112.5209 + ], + [ + 29.9791, + -111.8836 + ], + [ + 43.4314, + -104.8528 + ], + [ + 57.9152, + -100.3121 + ], + [ + 69.0894, + -90.0391 + ], + [ + 81.9045, + -81.9045 + ], + [ + 90.0391, + -69.0894 + ], + [ + 100.3121, + -57.9152 + ], + [ + 104.8528, + -43.4314 + ], + [ + 111.8836, + -29.9791 + ], + [ + 112.5209, + -14.8137 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "89.3", + "name": "ConeInHi" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 12.1544, + 0.0 + ], + [ + 11.7876, + 1.5519 + ], + [ + 11.7403, + 3.1458 + ], + [ + 10.9843, + 4.5499 + ], + [ + 10.5261, + 6.0772 + ], + [ + 9.4325, + 7.2378 + ], + [ + 8.5945, + 8.5945 + ], + [ + 7.2378, + 9.4325 + ], + [ + 6.0772, + 10.5261 + ], + [ + 4.5499, + 10.9843 + ], + [ + 3.1458, + 11.7403 + ], + [ + 1.5519, + 11.7876 + ], + [ + 0.0, + 12.1544 + ], + [ + -1.5519, + 11.7876 + ], + [ + -3.1458, + 11.7403 + ], + [ + -4.5499, + 10.9843 + ], + [ + -6.0772, + 10.5261 + ], + [ + -7.2378, + 9.4325 + ], + [ + -8.5945, + 8.5945 + ], + [ + -9.4325, + 7.2378 + ], + [ + -10.5261, + 6.0772 + ], + [ + -10.9843, + 4.5499 + ], + [ + -11.7403, + 3.1458 + ], + [ + -11.7876, + 1.5519 + ], + [ + -12.1544, + 0.0 + ], + [ + -11.7876, + -1.5519 + ], + [ + -11.7403, + -3.1458 + ], + [ + -10.9843, + -4.5499 + ], + [ + -10.5261, + -6.0772 + ], + [ + -9.4325, + -7.2378 + ], + [ + -8.5945, + -8.5945 + ], + [ + -7.2378, + -9.4325 + ], + [ + -6.0772, + -10.5261 + ], + [ + -4.5499, + -10.9843 + ], + [ + -3.1458, + -11.7403 + ], + [ + -1.5519, + -11.7876 + ], + [ + -0.0, + -12.1544 + ], + [ + 1.5519, + -11.7876 + ], + [ + 3.1458, + -11.7403 + ], + [ + 4.5499, + -10.9843 + ], + [ + 6.0772, + -10.5261 + ], + [ + 7.2378, + -9.4325 + ], + [ + 8.5945, + -8.5945 + ], + [ + 9.4325, + -7.2378 + ], + [ + 10.5261, + -6.0772 + ], + [ + 10.9843, + -4.5499 + ], + [ + 11.7403, + -3.1458 + ], + [ + 11.7876, + -1.5519 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.loft", + "params": { + "sections": [ + { + "sketch": "ConeInLo" + }, + { + "sketch": "ConeInHi" + } + ], + "operation": "new", + "body_name": "ConeIn", + "name": "ConeIn" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Cone", + "tools": [ + "ConeIn" + ], + "operation": "cut" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "-1", + "name": "LipLo" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 114.4444, + 0.0 + ], + [ + 111.196, + 14.6392 + ], + [ + 110.5448, + 29.6204 + ], + [ + 103.6182, + 42.9201 + ], + [ + 99.1118, + 57.2222 + ], + [ + 88.979, + 68.276 + ], + [ + 80.9244, + 80.9244 + ], + [ + 68.276, + 88.979 + ], + [ + 57.2222, + 99.1118 + ], + [ + 42.9201, + 103.6182 + ], + [ + 29.6204, + 110.5448 + ], + [ + 14.6392, + 111.196 + ], + [ + 0.0, + 114.4444 + ], + [ + -14.6392, + 111.196 + ], + [ + -29.6204, + 110.5448 + ], + [ + -42.9201, + 103.6182 + ], + [ + -57.2222, + 99.1118 + ], + [ + -68.276, + 88.979 + ], + [ + -80.9244, + 80.9244 + ], + [ + -88.979, + 68.276 + ], + [ + -99.1118, + 57.2222 + ], + [ + -103.6182, + 42.9201 + ], + [ + -110.5448, + 29.6204 + ], + [ + -111.196, + 14.6392 + ], + [ + -114.4444, + 0.0 + ], + [ + -111.196, + -14.6392 + ], + [ + -110.5448, + -29.6204 + ], + [ + -103.6182, + -42.9201 + ], + [ + -99.1118, + -57.2222 + ], + [ + -88.979, + -68.276 + ], + [ + -80.9244, + -80.9244 + ], + [ + -68.276, + -88.979 + ], + [ + -57.2222, + -99.1118 + ], + [ + -42.9201, + -103.6182 + ], + [ + -29.6204, + -110.5448 + ], + [ + -14.6392, + -111.196 + ], + [ + -0.0, + -114.4444 + ], + [ + 14.6392, + -111.196 + ], + [ + 29.6204, + -110.5448 + ], + [ + 42.9201, + -103.6182 + ], + [ + 57.2222, + -99.1118 + ], + [ + 68.276, + -88.979 + ], + [ + 80.9244, + -80.9244 + ], + [ + 88.979, + -68.276 + ], + [ + 99.1118, + -57.2222 + ], + [ + 103.6182, + -42.9201 + ], + [ + 110.5448, + -29.6204 + ], + [ + 111.196, + -14.6392 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "6", + "name": "LipHi" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 120.0, + 0.0 + ], + [ + 116.5939, + 15.3499 + ], + [ + 115.9111, + 31.0583 + ], + [ + 108.6482, + 45.0036 + ], + [ + 103.923, + 60.0 + ], + [ + 93.2984, + 71.5903 + ], + [ + 84.8528, + 84.8528 + ], + [ + 71.5903, + 93.2984 + ], + [ + 60.0, + 103.923 + ], + [ + 45.0036, + 108.6482 + ], + [ + 31.0583, + 115.9111 + ], + [ + 15.3499, + 116.5939 + ], + [ + 0.0, + 120.0 + ], + [ + -15.3499, + 116.5939 + ], + [ + -31.0583, + 115.9111 + ], + [ + -45.0036, + 108.6482 + ], + [ + -60.0, + 103.923 + ], + [ + -71.5903, + 93.2984 + ], + [ + -84.8528, + 84.8528 + ], + [ + -93.2984, + 71.5903 + ], + [ + -103.923, + 60.0 + ], + [ + -108.6482, + 45.0036 + ], + [ + -115.9111, + 31.0583 + ], + [ + -116.5939, + 15.3499 + ], + [ + -120.0, + 0.0 + ], + [ + -116.5939, + -15.3499 + ], + [ + -115.9111, + -31.0583 + ], + [ + -108.6482, + -45.0036 + ], + [ + -103.923, + -60.0 + ], + [ + -93.2984, + -71.5903 + ], + [ + -84.8528, + -84.8528 + ], + [ + -71.5903, + -93.2984 + ], + [ + -60.0, + -103.923 + ], + [ + -45.0036, + -108.6482 + ], + [ + -31.0583, + -115.9111 + ], + [ + -15.3499, + -116.5939 + ], + [ + -0.0, + -120.0 + ], + [ + 15.3499, + -116.5939 + ], + [ + 31.0583, + -115.9111 + ], + [ + 45.0036, + -108.6482 + ], + [ + 60.0, + -103.923 + ], + [ + 71.5903, + -93.2984 + ], + [ + 84.8528, + -84.8528 + ], + [ + 93.2984, + -71.5903 + ], + [ + 103.923, + -60.0 + ], + [ + 108.6482, + -45.0036 + ], + [ + 115.9111, + -31.0583 + ], + [ + 116.5939, + -15.3499 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.loft", + "params": { + "sections": [ + { + "sketch": "LipLo" + }, + { + "sketch": "LipHi" + } + ], + "operation": "new", + "body_name": "Lip", + "name": "Lip" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "-2", + "name": "LipInLo" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 112.5508, + 0.0 + ], + [ + 109.3343, + 14.3941 + ], + [ + 108.7157, + 29.1303 + ], + [ + 101.8834, + 42.2015 + ], + [ + 97.4718, + 56.2754 + ], + [ + 87.4892, + 67.1329 + ], + [ + 79.5854, + 79.5854 + ], + [ + 67.1329, + 87.4892 + ], + [ + 56.2754, + 97.4718 + ], + [ + 42.2015, + 101.8834 + ], + [ + 29.1303, + 108.7157 + ], + [ + 14.3941, + 109.3343 + ], + [ + 0.0, + 112.5508 + ], + [ + -14.3941, + 109.3343 + ], + [ + -29.1303, + 108.7157 + ], + [ + -42.2015, + 101.8834 + ], + [ + -56.2754, + 97.4718 + ], + [ + -67.1329, + 87.4892 + ], + [ + -79.5854, + 79.5854 + ], + [ + -87.4892, + 67.1329 + ], + [ + -97.4718, + 56.2754 + ], + [ + -101.8834, + 42.2015 + ], + [ + -108.7157, + 29.1303 + ], + [ + -109.3343, + 14.3941 + ], + [ + -112.5508, + 0.0 + ], + [ + -109.3343, + -14.3941 + ], + [ + -108.7157, + -29.1303 + ], + [ + -101.8834, + -42.2015 + ], + [ + -97.4718, + -56.2754 + ], + [ + -87.4892, + -67.1329 + ], + [ + -79.5854, + -79.5854 + ], + [ + -67.1329, + -87.4892 + ], + [ + -56.2754, + -97.4718 + ], + [ + -42.2015, + -101.8834 + ], + [ + -29.1303, + -108.7157 + ], + [ + -14.3941, + -109.3343 + ], + [ + -0.0, + -112.5508 + ], + [ + 14.3941, + -109.3343 + ], + [ + 29.1303, + -108.7157 + ], + [ + 42.2015, + -101.8834 + ], + [ + 56.2754, + -97.4718 + ], + [ + 67.1329, + -87.4892 + ], + [ + 79.5854, + -79.5854 + ], + [ + 87.4892, + -67.1329 + ], + [ + 97.4718, + -56.2754 + ], + [ + 101.8834, + -42.2015 + ], + [ + 108.7157, + -29.1303 + ], + [ + 109.3343, + -14.3941 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": "7", + "name": "LipInHi" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 119.6937, + 0.0 + ], + [ + 116.2745, + 15.3078 + ], + [ + 115.6152, + 30.979 + ], + [ + 108.3505, + 44.8803 + ], + [ + 103.6577, + 59.8468 + ], + [ + 93.0427, + 71.3942 + ], + [ + 84.6362, + 84.6362 + ], + [ + 71.3942, + 93.0427 + ], + [ + 59.8468, + 103.6577 + ], + [ + 44.8803, + 108.3505 + ], + [ + 30.979, + 115.6152 + ], + [ + 15.3078, + 116.2745 + ], + [ + 0.0, + 119.6937 + ], + [ + -15.3078, + 116.2745 + ], + [ + -30.979, + 115.6152 + ], + [ + -44.8803, + 108.3505 + ], + [ + -59.8468, + 103.6577 + ], + [ + -71.3942, + 93.0427 + ], + [ + -84.6362, + 84.6362 + ], + [ + -93.0427, + 71.3942 + ], + [ + -103.6577, + 59.8468 + ], + [ + -108.3505, + 44.8803 + ], + [ + -115.6152, + 30.979 + ], + [ + -116.2745, + 15.3078 + ], + [ + -119.6937, + 0.0 + ], + [ + -116.2745, + -15.3078 + ], + [ + -115.6152, + -30.979 + ], + [ + -108.3505, + -44.8803 + ], + [ + -103.6577, + -59.8468 + ], + [ + -93.0427, + -71.3942 + ], + [ + -84.6362, + -84.6362 + ], + [ + -71.3942, + -93.0427 + ], + [ + -59.8468, + -103.6577 + ], + [ + -44.8803, + -108.3505 + ], + [ + -30.979, + -115.6152 + ], + [ + -15.3078, + -116.2745 + ], + [ + -0.0, + -119.6937 + ], + [ + 15.3078, + -116.2745 + ], + [ + 30.979, + -115.6152 + ], + [ + 44.8803, + -108.3505 + ], + [ + 59.8468, + -103.6577 + ], + [ + 71.3942, + -93.0427 + ], + [ + 84.6362, + -84.6362 + ], + [ + 93.0427, + -71.3942 + ], + [ + 103.6577, + -59.8468 + ], + [ + 108.3505, + -44.8803 + ], + [ + 115.6152, + -30.979 + ], + [ + 116.2745, + -15.3078 + ] + ], + "closed": true, + "infer": false + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.loft", + "params": { + "sections": [ + { + "sketch": "LipInLo" + }, + { + "sketch": "LipInHi" + } + ], + "operation": "new", + "body_name": "LipIn", + "name": "LipIn" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Lip", + "tools": [ + "LipIn" + ], + "operation": "cut" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Cone", + "tools": [ + "Lip" + ], + "operation": "join" + } + } + ] +} diff --git a/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/expected.json b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/expected.json new file mode 100644 index 000000000..0d4fbde59 --- /dev/null +++ b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4092" + ], + "what": "the same without the top flange: the join fails with 'boolean Union: no result'", + "source": "invariants", + "method": "the pad (X -8..8, Y 18..25, Z 36..59) overlaps the body, ribs and ring, so the join is one connected solid; the join must succeed with one valid closed solid and no panic", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/recipe.json b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/recipe.json new file mode 100644 index 000000000..d8152af37 --- /dev/null +++ b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/recipe.json @@ -0,0 +1,508 @@ +{ + "commands": [ + { + "command": "file.new", + "params": { + "name": "Native_loft_pad_union_repro" + } + }, + { + "command": "document.units", + "params": { + "units": "mm" + } + }, + { + "command": "solid.cylinder", + "params": { + "diameter": "36 mm", + "height": "21 mm", + "base": [ + 0, + 0, + 0 + ], + "operation": "new", + "name": "01_Neck_outer_D36_H21", + "body_name": "NATIVE_CAP_BODY" + } + }, + { + "command": "sketch.create", + "params": { + "name": "02_Outer_transition_round", + "plane": "XY", + "offset": "21 mm" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "diameter": 36 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "name": "03_Outer_transition_ellipse", + "plane": "XY", + "offset": "38 mm" + } + }, + { + "command": "sketch.ellipse", + "params": { + "center": [ + 0, + 0 + ], + "major": [ + 30.0, + 0 + ], + "minor_radius": 20.0 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.loft", + "params": { + "sections": [ + { + "sketch": "02_Outer_transition_round" + }, + { + "sketch": "03_Outer_transition_ellipse" + } + ], + "operation": "join", + "targets": [ + "NATIVE_CAP_BODY" + ], + "name": "04_Outer_round_to_oval_transition" + } + }, + { + "command": "sketch.create", + "params": { + "name": "05_Upper_chamber_60x40", + "plane": "XY", + "offset": "38 mm" + } + }, + { + "command": "sketch.ellipse", + "params": { + "center": [ + 0, + 0 + ], + "major": [ + 30.0, + 0 + ], + "minor_radius": 20.0 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "05_Upper_chamber_60x40", + "distance": 26, + "operation": "join", + "targets": [ + "NATIVE_CAP_BODY" + ], + "name": "06_Upper_chamber_blank" + } + }, + { + "command": "sketch.create", + "params": { + "name": "Handle_outer_D24", + "plane": { + "origin": [ + -5, + 0, + 0 + ], + "x_dir": [ + 0, + 1, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 30, + 47 + ], + "diameter": 24 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Handle_outer_D24", + "distance": 10, + "operation": "join", + "targets": [ + "NATIVE_CAP_BODY" + ], + "name": "Handle_outer_D24_thickness10" + } + }, + { + "command": "sketch.create", + "params": { + "name": "Handle_lower_rib_X-8", + "plane": { + "origin": [ + -8, + 0, + 0 + ], + "x_dir": [ + 0, + 1, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + } + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 18.0, + 37.5 + ], + "end": [ + 19.5, + 36.0 + ], + "through": [ + 18.439339828220177, + 36.43933982822018 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 19.5, + 36.0 + ], + [ + 24.4516191451179, + 36.0 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 24.4516191451179, + 36.0 + ], + "end": [ + 25.20742568340403, + 38.79566835134765 + ], + "through": [ + 25.89963546529897, + 37.10853003117829 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 25.20742568340403, + 38.79566835134765 + ], + [ + 20.25580653828613, + 41.68411285266642 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 20.25580653828613, + 41.68411285266642 + ], + "end": [ + 18.0, + 40.38844450131877 + ], + "through": [ + 18.75290891031588, + 41.68915773017231 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 18.0, + 40.38844450131877 + ], + [ + 18.0, + 37.5 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Handle_lower_rib_X-8", + "distance": 4, + "operation": "join", + "targets": [ + "NATIVE_CAP_BODY" + ], + "name": "Handle_lower_rib_X-8_R1p5_thickness4" + } + }, + { + "command": "sketch.create", + "params": { + "name": "Handle_lower_rib_X4", + "plane": { + "origin": [ + 4, + 0, + 0 + ], + "x_dir": [ + 0, + 1, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + } + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 18.0, + 37.5 + ], + "end": [ + 19.5, + 36.0 + ], + "through": [ + 18.439339828220177, + 36.43933982822018 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 19.5, + 36.0 + ], + [ + 24.4516191451179, + 36.0 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 24.4516191451179, + 36.0 + ], + "end": [ + 25.20742568340403, + 38.79566835134765 + ], + "through": [ + 25.89963546529897, + 37.10853003117829 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 25.20742568340403, + 38.79566835134765 + ], + [ + 20.25580653828613, + 41.68411285266642 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 20.25580653828613, + 41.68411285266642 + ], + "end": [ + 18.0, + 40.38844450131877 + ], + "through": [ + 18.75290891031588, + 41.68915773017231 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 18.0, + 40.38844450131877 + ], + [ + 18.0, + 37.5 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Handle_lower_rib_X4", + "distance": 4, + "operation": "join", + "targets": [ + "NATIVE_CAP_BODY" + ], + "name": "Handle_lower_rib_X4_R1p5_thickness4" + } + }, + { + "command": "sketch.create", + "params": { + "name": "Handle_root_pad_R3", + "plane": { + "origin": [ + 0, + 18, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + } + } + }, + { + "command": "sketch.rectangle.rounded", + "params": { + "p0": [ + -8, + 36 + ], + "p1": [ + 8, + 59 + ], + "radius": 3 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Handle_root_pad_R3", + "distance": 7, + "direction": "negative", + "operation": "join", + "targets": [ + "NATIVE_CAP_BODY" + ], + "name": "Native_root_pad_R3" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/expected.json new file mode 100644 index 000000000..6a6995d37 --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [], + "what": "the stock shelled 2 mm with no face open: a closed body with a sealed void", + "source": "analytic", + "method": "void 56x36x16: V = 48000 - 32256; faces 6 outer + 6 inner; one body, an outer and an inner shell", + "body_count": 1, + "shells": 2, + "volume_mm3": 15744, + "faces": 12 +} diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/recipe.json new file mode 100644 index 000000000..77c323e4a --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/recipe.json @@ -0,0 +1,12 @@ +{ + "base": "../../01-primitives/001-box", + "commands": [ + { + "command": "solid.shell", + "params": { + "faces": [], + "thickness": 2 + } + } + ] +} diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/expected.json new file mode 100644 index 000000000..bb9fc7609 --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/expected.json @@ -0,0 +1,9 @@ +{ + "sources": [], + "what": "a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane", + "source": "analytic", + "method": "V = (2/3) pi (20^3 - 18^3); faces: outer sphere, inner sphere, base ring", + "body_count": 1, + "volume_mm3": 4540.648581988447, + "faces": 3 +} diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/recipe.json new file mode 100644 index 000000000..aa3c517f0 --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/recipe.json @@ -0,0 +1,98 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + } + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 20, + 0 + ] + ] + } + }, + { + "command": "sketch.arc.center_point", + "params": { + "center": [ + 0, + 0 + ], + "start": [ + 20, + 0 + ], + "end": [ + 0, + 20 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 20 + ], + [ + 0, + 0 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": "Z", + "angle": "360 deg", + "operation": "new" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 10, + 0, + 0 + ] + ], + "thickness": 2 + } + } + ] +} diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/expected.json new file mode 100644 index 000000000..0fa7a1053 --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3576", + "tangency-labs/solidcraft#3573" + ], + "what": "a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design)", + "source": "invariants", + "method": "no closed-form volume (tilted rounds). Invariants: the shell succeeds, one closed body, and the record's geometry check holds (every edge of the four inner rounds lies on its faces; the old offset left them up to 0.02 mm off, which other STEP readers reject)", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/recipe.json new file mode 100644 index 000000000..e6ad11c23 --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/recipe.json @@ -0,0 +1,76 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY" + } + }, + { + "command": "sketch.rectangle.center", + "params": { + "center": [ + 0, + 0 + ], + "corner": [ + 60, + 40 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 40, + "taper": "-5 deg", + "operation": "new" + } + }, + { + "command": "solid.fillet", + "params": { + "edges": [ + [ + 58.25022672948152, + 38.25022672948152, + 20 + ], + [ + 58.25022672948152, + -38.25022672948152, + 20 + ], + [ + -58.25022672948152, + 38.25022672948152, + 20 + ], + [ + -58.25022672948152, + -38.25022672948152, + 20 + ] + ], + "radius": 4 + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 0, + 0, + 40 + ] + ], + "thickness": 2 + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/expected.json new file mode 100644 index 000000000..aa0957caf --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4847" + ], + "what": "a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result'", + "source": "analytic", + "method": "shell: (2/3) pi (20^3 - 18^3). The ring's prism r 18..20, z 0..10 lies inside the dome's wall where r^2 + z^2 <= 20^2 (r >= 18 keeps it outside the cavity) and pokes out elsewhere: it adds 760 pi - Int_18^20 2 pi r sqrt(400 - r^2) dr = 760 pi - (2 pi/3) 76^1.5", + "body_count": 1, + "volume_mm3": 5540.612 +} diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/recipe.json new file mode 100644 index 000000000..7c7c430cc --- /dev/null +++ b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/recipe.json @@ -0,0 +1,113 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Quarter" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0 + ], + [ + 20, + 0 + ] + ] + } + }, + { + "command": "sketch.arc.three_point", + "params": { + "start": [ + 20, + 0 + ], + "through": [ + 14.142136, + 14.142136 + ], + "end": [ + 0, + 20 + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 20 + ], + [ + 0, + 0 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "sketch": "Quarter", + "axis": "y", + "body_name": "Dome" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + 0, + 0, + 0 + ] + ], + "thickness": 2 + } + }, + { + "command": "solid.extrude", + "params": { + "face": [ + 19, + 0, + 0 + ], + "face_body": "Dome", + "distance": 10, + "direction": "negative", + "operation": "join" + } + } + ] +} diff --git a/tests/kernel-cases/ladder/golden.json b/tests/kernel-cases/ladder/golden.json index f05d05226..a1e17675d 100644 --- a/tests/kernel-cases/ladder/golden.json +++ b/tests/kernel-cases/ladder/golden.json @@ -1,265 +1,880 @@ { - "reason": "SMLib only (truck removed): each case's smlib entry from the last recording, which predates SMLib running every case; record again after the first SMLib-only run", "cases": { "ladder/01-primitives/001-box": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 48000.0 + }, + "seconds": 0.002421083, + "status": "pass" }, "ladder/01-primitives/002-cylinder": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2513.27408091628, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 9424.777353639352 + }, + "seconds": 0.028312155, + "status": "pass" }, "ladder/01-primitives/003-cone": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1307.6181023117074, + "body_count": 1, + "edges": 3, + "faces": 2, + "vertices": 3, + "volume_mm3": 3141.59242697122 + }, + "seconds": 0.013765259, + "status": "pass" }, "ladder/01-primitives/004-frustum": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1364.1829847648855, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 3665.191341582638 + }, + "seconds": 0.016146822, + "status": "pass" }, "ladder/01-primitives/005-sphere": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1256.6371531595494, + "body_count": 1, + "edges": 1, + "faces": 1, + "vertices": 2, + "volume_mm3": 4188.791896913583 + }, + "seconds": 0.004701028, + "status": "pass" }, "ladder/01-primitives/006-torus": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 3947.8419806693646, + "body_count": 1, + "edges": 1, + "faces": 1, + "vertices": 1, + "volume_mm3": 9869.61010099745 + }, + "seconds": 0.46266828, + "status": "pass" }, "ladder/02-booleans/001-coincident-face-join": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 10800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 72000.0 + }, + "seconds": 0.011548066, + "status": "pass" }, "ladder/02-booleans/002-coplanar-overlap-join": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 14400.0, + "body_count": 1, + "edges": 24, + "faces": 10, + "vertices": 16, + "volume_mm3": 84000.0 + }, + "seconds": 0.013128601, + "status": "pass" }, "ladder/02-booleans/003-pocket-flush-with-top": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9600.000000000002, + "body_count": 1, + "edges": 24, + "faces": 11, + "vertices": 16, + "volume_mm3": 44000.0 + }, + "seconds": 0.012931752, + "status": "pass" }, "ladder/02-booleans/004-edge-on-edge-no-overlap": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 48000.0 + }, + "seconds": 0.00644086, + "status": "pass" }, "ladder/02-booleans/005-vertex-on-face-no-overlap": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 48000.0 + }, + "seconds": 0.034711702, + "status": "pass" }, "ladder/02-booleans/006-tangent-along-line-no-overlap": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 48000.0 + }, + "seconds": 0.026354658, + "status": "pass" }, "ladder/02-booleans/007-near-tangent-gap-1e-3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 48000.0 + }, + "seconds": 0.018841682, + "status": "pass" }, "ladder/02-booleans/008-near-tangent-gap-1e-6": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 48000.0 + }, + "seconds": 0.015557891, + "status": "pass" }, "ladder/02-booleans/009-near-tangent-overlap-1e-3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.00018857595, + "body_count": 1, + "edges": 18, + "faces": 8, + "vertices": 12, + "volume_mm3": 47999.9886864612 + }, + "seconds": 0.029918273, + "status": "pass" }, "ladder/02-booleans/010-near-tangent-overlap-1e-6": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.0, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 48000.0 + }, + "seconds": 0.016262407, + "status": "pass" }, "ladder/02-booleans/011-tangent-along-circle-through-hole": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9428.318515408751, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 41716.81450698026 + }, + "seconds": 0.034853735, + "status": "pass" }, "ladder/02-booleans/012-tangent-along-circle-bowl": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9742.477897359224, + "body_count": 1, + "edges": 17, + "faces": 8, + "vertices": 12, + "volume_mm3": 42764.01195654861 + }, + "seconds": 0.043282076, + "status": "pass" }, "ladder/02-booleans/013-cut-across-cylinder-seam": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2036.8673139138011, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 5888.550569284607 + }, + "seconds": 0.038788456, + "status": "pass" }, "ladder/02-booleans/014-cut-through-sphere-pole": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1332.0893143869712, + "body_count": 1, + "edges": 14, + "faces": 6, + "vertices": 10, + "volume_mm3": 4110.944533826848 + }, + "seconds": 0.011872004, + "status": "pass" }, "ladder/02-booleans/015-knife-edge-wedge-cut": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 6929.822128134708, + "body_count": 1, + "edges": 9, + "faces": 5, + "vertices": 6, + "volume_mm3": 24000.000000000007 + }, + "seconds": 0.011355745, + "status": "pass" }, "ladder/02-booleans/016-v-groove-pinches-bottom-to-line": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9225.904606350497, + "body_count": 2, + "edges": 24, + "faces": 12, + "vertices": 16, + "volume_mm3": 38400.000000000015 + }, + "seconds": 0.007019822, + "status": "pass" }, "ladder/02-booleans/017-cylinder-tangent-top-and-bottom": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 11941.592611921053, + "body_count": 2, + "edges": 24, + "faces": 12, + "vertices": 16, + "volume_mm3": 29150.438046445848 + }, + "seconds": 0.023206421, + "status": "pass" }, "ladder/02-booleans/018-hole-tangent-to-side-face": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9428.31829497222, + "body_count": 1, + "edges": 17, + "faces": 7, + "vertices": 10, + "volume_mm3": 41716.81209239218 + }, + "seconds": 0.026489907, + "status": "pass" }, "ladder/02-booleans/019-notch-flush-with-end-face": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8800.000000000002, + "body_count": 1, + "edges": 24, + "faces": 10, + "vertices": 16, + "volume_mm3": 32000.000000000015 + }, + "seconds": 0.012994217, + "status": "pass" }, "ladder/02-booleans/020-part-back-wall": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 10900.0, + "body_count": 1, + "edges": 18, + "faces": 8, + "vertices": 12, + "volume_mm3": 57000.0 + }, + "seconds": 0.012916937, + "status": "pass" + }, + "ladder/02-booleans/021-holes-touching-at-a-point": { + "measured": { + "area_mm2": 9742.477564676688, + "body_count": 1, + "edges": 17, + "faces": 8, + "vertices": 10, + "volume_mm3": 44858.40494270982 + }, + "seconds": 0.066898018, + "status": "pass" + }, + "ladder/02-booleans/022-cylinder-grazing-a-hole-edge": { + "measured": { + "area_mm2": 576.0597799448259, + "body_count": 1, + "edges": 24, + "faces": 11, + "vertices": 16, + "volume_mm3": 700.1694600993085 + }, + "seconds": 0.059928004, + "status": "pass" + }, + "ladder/02-booleans/023-lips-1e-4-off-the-walls-joined": { + "measured": { + "area_mm2": 1610.939957683726, + "body_count": 1, + "edges": 54, + "faces": 22, + "vertices": 34, + "volume_mm3": 769.4693261952389 + }, + "seconds": 0.107631267, + "status": "pass" + }, + "ladder/02-booleans/024-wall-halves-merged-into-a-flange": { + "measured": { + "area_mm2": 9676.104640800102, + "body_count": 1, + "edges": 9, + "faces": 6, + "vertices": 6, + "volume_mm3": 37875.03682260403 + }, + "seconds": 0.175934284, + "status": "pass" + }, + "ladder/02-booleans/025-flush-chord-layers-joined": { + "measured": { + "area_mm2": 19848.963867303115, + "body_count": 1, + "edges": 86, + "faces": 30, + "vertices": 52, + "volume_mm3": 24340.93465191528 + }, + "seconds": 1.036233441, + "status": "pass" }, "ladder/03-analytic-profiles/001-extrude-rect-with-arc-end": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 10513.274682103463, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 60566.37574264513 + }, + "seconds": 0.013805836, + "status": "pass" }, "ladder/03-analytic-profiles/002-extrude-annulus": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 4712.3888135105635, + "body_count": 1, + "edges": 6, + "faces": 4, + "vertices": 4, + "volume_mm3": 14137.165496409769 + }, + "seconds": 0.032683758, + "status": "pass" }, "ladder/03-analytic-profiles/003-extrude-tapered-circle": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1679.0714571133199, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 5247.894417424099 + }, + "seconds": 0.039307211, + "status": "pass" }, "ladder/03-analytic-profiles/004-revolve-full-off-axis": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 7539.82227780291, + "body_count": 1, + "edges": 6, + "faces": 4, + "vertices": 4, + "volume_mm3": 28274.33099281954 + }, + "seconds": 0.034131125, + "status": "pass" }, "ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 3769.911189319725, + "body_count": 1, + "edges": 2, + "faces": 2, + "vertices": 2, + "volume_mm3": 16755.16137194915 + }, + "seconds": 0.072184153, + "status": "pass" }, "ladder/03-analytic-profiles/006-revolve-partial-90": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1142.4774823972846, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 2356.1929112075295 + }, + "seconds": 0.008946295, + "status": "pass" }, "ladder/03-analytic-profiles/007-revolve-180-touching-axis": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2249.3361006094165, + "body_count": 1, + "edges": 6, + "faces": 4, + "vertices": 4, + "volume_mm3": 7068.582941859537 + }, + "seconds": 0.015959589, + "status": "pass" }, "ladder/03-analytic-profiles/008-extrude-slot": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 3656.63741233849, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 11141.594404248584 + }, + "seconds": 0.011646259, + "status": "pass" }, "ladder/03-analytic-profiles/009-part-boss-and-slot": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 12164.778448487314, + "body_count": 1, + "edges": 33, + "faces": 14, + "vertices": 22, + "volume_mm3": 55605.309277598055 + }, + "seconds": 0.065359132, + "status": "pass" + }, + "ladder/03-analytic-profiles/010-revolve-horn-torus-270": { + "measured": { + "area_mm2": 7211.92921002673, + "body_count": 1, + "edges": 6, + "faces": 4, + "vertices": 4, + "volume_mm3": 28932.185072957283 + }, + "seconds": 0.07428757, + "status": "pass" }, "ladder/04-spline-profiles/001-extrude-bezier-arch": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2766.836543476887, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 8200.0 + }, + "seconds": 0.008144467, + "status": "pass" }, "ladder/04-spline-profiles/002-revolve-bezier-profile": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 5856.9826422553115, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 34131.153548347604 + }, + "seconds": 0.080633805, + "status": "pass" }, "ladder/04-spline-profiles/003-pipe-along-bezier": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 605.9576565517693, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 580.8255293341258 + }, + "seconds": 0.079442777, + "status": "pass" }, "ladder/04-spline-profiles/004-sweep-square-along-bezier": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 771.5291970478809, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 739.5292097504819 + }, + "seconds": 0.037046017, + "status": "pass" }, "ladder/04-spline-profiles/005-loft-square-frustum": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 5794.733192202055, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 28000.000000000007 + }, + "seconds": 0.009299752, + "status": "pass" }, "ladder/04-spline-profiles/006-loft-circle-frustum": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 4551.172885600089, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 21991.14802951055 + }, + "seconds": 0.031463497, + "status": "pass" }, "ladder/04-spline-profiles/007-loft-three-circles": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 6453.967221806411, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 23457.221256199402 + }, + "seconds": 0.038500679, + "status": "pass" }, "ladder/04-spline-profiles/008-loft-square-to-circle": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 5454.34068438542, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 26310.54362092466 + }, + "seconds": 0.013877676, + "status": "pass" }, "ladder/04-spline-profiles/009-extrude-periodic-fit-spline": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 3698.6023993383496, + "body_count": 1, + "edges": 18, + "faces": 8, + "vertices": 12, + "volume_mm3": 12281.011858436344 + }, + "seconds": 0.028766989, + "status": "pass" }, "ladder/04-spline-profiles/010-part-bezier-window": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 12389.018284526814, + "body_count": 1, + "edges": 39, + "faces": 16, + "vertices": 26, + "volume_mm3": 54273.309277598055 + }, + "seconds": 0.095040941, + "status": "pass" + }, + "ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined": { + "measured": { + "area_mm2": 121420.35300591686, + "body_count": 1, + "edges": 1096, + "faces": 388, + "vertices": 584, + "volume_mm3": 44443.494125231206 + }, + "seconds": 1.129550392, + "status": "pass" + }, + "ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad": { + "measured": { + "area_mm2": 13275.843011957519, + "body_count": 1, + "edges": 86, + "faces": 31, + "vertices": 57, + "volume_mm3": 100193.008857701 + }, + "seconds": 0.499138439, + "status": "pass" }, "ladder/05-holes-and-taps/001-simple-through": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9271.23888918968, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 46429.20345247036 + }, + "seconds": 0.030064675, + "status": "pass" }, "ladder/05-holes-and-taps/002-simple-blind-flat": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9114.159273842968, + "body_count": 1, + "edges": 15, + "faces": 8, + "vertices": 10, + "volume_mm3": 47214.60167821204 + }, + "seconds": 0.024571035, + "status": "pass" }, "ladder/05-holes-and-taps/003-drilled-blind-118": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9127.246594228827, + "body_count": 1, + "edges": 17, + "faces": 8, + "vertices": 12, + "volume_mm3": 47135.94953558977 + }, + "seconds": 0.022535569, + "status": "pass" }, "ladder/05-holes-and-taps/004-counterbore": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9234.733473850809, + "body_count": 1, + "edges": 18, + "faces": 9, + "vertices": 12, + "volume_mm3": 46926.50439234107 + }, + "seconds": 0.048801764, + "status": "pass" }, "ladder/05-holes-and-taps/005-countersink": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9122.958530910642, + "body_count": 1, + "edges": 18, + "faces": 8, + "vertices": 12, + "volume_mm3": 47219.57154291447 + }, + "seconds": 0.060514999, + "status": "pass" }, "ladder/05-holes-and-taps/006-tapped-m6-through": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9074.889289958897, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47607.30072936878 + }, + "seconds": 0.017080042, + "status": "pass" }, "ladder/05-holes-and-taps/007-tapped-m8-blind": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9060.431918590197, + "body_count": 1, + "edges": 17, + "faces": 8, + "vertices": 12, + "volume_mm3": 47546.393985981646 + }, + "seconds": 0.023700407, + "status": "pass" }, "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 10551.678983923912, + "body_count": 1, + "edges": 6, + "faces": 4, + "vertices": 4, + "volume_mm3": 74844.80869901458 + }, + "seconds": 0.068223193, + "status": "pass" }, "ladder/05-holes-and-taps/009-hole-0.5-from-edge": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9271.238661980013, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 46429.20147858148 + }, + "seconds": 0.017685341, + "status": "pass" }, "ladder/05-holes-and-taps/010-hole-tangent-to-end-face": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9271.238824131646, + "body_count": 1, + "edges": 17, + "faces": 7, + "vertices": 10, + "volume_mm3": 46429.202650315056 + }, + "seconds": 0.019412548, + "status": "pass" }, "ladder/05-holes-and-taps/011-crossing-holes-steinmetz": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9970.796002655847, + "body_count": 1, + "edges": 27, + "faces": 10, + "vertices": 17, + "volume_mm3": 43954.275881084504 + }, + "seconds": 0.063841221, + "status": "pass" }, "ladder/05-holes-and-taps/012-crossing-tapped-holes-offset": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9586.62063280522, + "body_count": 1, + "edges": 21, + "faces": 8, + "vertices": 14, + "volume_mm3": 46870.21851307568 + }, + "seconds": 0.071817865, + "status": "pass" }, "ladder/05-holes-and-taps/013-part-holes": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 13115.21289450834, + "body_count": 1, + "edges": 48, + "faces": 20, + "vertices": 32, + "volume_mm3": 53470.419311175334 + }, + "seconds": 0.234927852, + "status": "pass" }, "ladder/06-threads/001-external-m10-full": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1529.0164922938948, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 1954.199115350778 + }, + "seconds": 1.3368298730000001, + "status": "pass" }, "ladder/06-threads/002-external-m10x1-fine": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1581.5491374615535, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 2081.8666358146415 + }, + "seconds": 2.362301245, + "status": "pass" }, "ladder/06-threads/003-external-m10-partial-length": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1314.9714556944045, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 2155.198115106591 + }, + "seconds": 0.622200415, + "status": "pass" }, "ladder/06-threads/004-external-m10-to-shoulder": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2169.7800481918475, + "body_count": 1, + "edges": 21, + "faces": 10, + "vertices": 14, + "volume_mm3": 3615.802302421407 + }, + "seconds": 1.218730446, + "status": "pass" }, "ladder/06-threads/005-internal-m10-through": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 4978.062684127769, + "body_count": 1, + "edges": 24, + "faces": 10, + "vertices": 16, + "volume_mm3": 16688.208561903153 + }, + "seconds": 0.726237522, + "status": "pass" }, "ladder/06-threads/006-external-m10-into-chamfer": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1508.1279652569233, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 1948.6477627849551 + }, + "seconds": 1.3903218339999999, + "status": "pass" }, "ladder/06-threads/007-external-m10-at-filleted-shoulder": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2120.444130537007, + "body_count": 1, + "edges": 24, + "faces": 11, + "vertices": 16, + "volume_mm3": 3636.797350214795 + }, + "seconds": 1.231074762, + "status": "pass" }, "ladder/06-threads/008-multi-start-thread": { "seconds": null, @@ -270,200 +885,617 @@ "status": "unsupported" }, "ladder/06-threads/010-part-threaded-boss": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 13583.777771562018, + "body_count": 1, + "edges": 63, + "faces": 25, + "vertices": 42, + "volume_mm3": 53114.19660782891 + }, + "seconds": 0.659778997, + "status": "pass" }, "ladder/07-fillets/001-single-edge-r5": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8660.508890351646, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47678.09530101598 + }, + "seconds": 0.007045327, + "status": "pass" }, "ladder/07-fillets/002-four-vertical-edges-r5": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8585.398552475748, + "body_count": 1, + "edges": 24, + "faces": 10, + "vertices": 16, + "volume_mm3": 47570.79943563683 + }, + "seconds": 0.014052829, + "status": "pass" }, "ladder/07-fillets/003-tangent-chain-r3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8334.925890321756, + "body_count": 1, + "edges": 40, + "faces": 18, + "vertices": 24, + "volume_mm3": 47209.22370148293 + }, + "seconds": 0.043514557, + "status": "pass" }, "ladder/07-fillets/004-convex-and-concave-r5": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 4514.159503196192, + "body_count": 1, + "edges": 24, + "faces": 10, + "vertices": 16, + "volume_mm3": 14000.002049410516 + }, + "seconds": 0.020404232, + "status": "pass" }, "ladder/07-fillets/005-variable-r5-to-r1": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8717.217924043853, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47866.93985730924 + }, + "seconds": 0.010664095, + "status": "pass" }, "ladder/07-fillets/006-variable-r5-to-zero": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8730.326099374339, + "body_count": 1, + "edges": 14, + "faces": 7, + "vertices": 9, + "volume_mm3": 47892.693434961286 + }, + "seconds": 0.009475033, + "status": "pass" }, "ladder/07-fillets/007-variable-r5-to-1e-3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8730.313207916415, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47892.67196922709 + }, + "seconds": 0.018208591, + "status": "pass" }, "ladder/07-fillets/008-constant-r1e-3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8799.9742473454, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47999.99997963964 + }, + "seconds": 0.012294053, + "status": "pass" }, "ladder/07-fillets/009-corner-three-equal-r5": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8522.843213284448, + "body_count": 1, + "edges": 21, + "faces": 10, + "vertices": 13, + "volume_mm3": 47377.122731304844 + }, + "seconds": 0.01157685, + "status": "pass" }, "ladder/07-fillets/010-corner-unequal-r7-r3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8589.124659133073, + "body_count": 1, + "edges": 22, + "faces": 10, + "vertices": 14, + "volume_mm3": 47604.38618238413 + }, + "seconds": 0.018646689, + "status": "pass" }, "ladder/07-fillets/011-chain-ending-at-corner": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8571.128308024523, + "body_count": 1, + "edges": 17, + "faces": 8, + "vertices": 11, + "volume_mm3": 47475.477375283306 + }, + "seconds": 0.009817834, + "status": "pass" }, "ladder/07-fillets/012-variable-into-rounded-corner": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8665.870632567001, + "body_count": 1, + "edges": 18, + "faces": 8, + "vertices": 12, + "volume_mm3": 47754.87775109653 + }, + "seconds": 0.0295324, + "status": "pass" }, "ladder/07-fillets/013-corner-setback": { "seconds": null, "status": "unsupported" }, "ladder/07-fillets/014-curved-edge-r2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1829.240960227803, + "body_count": 1, + "edges": 5, + "faces": 4, + "vertices": 3, + "volume_mm3": 6231.659066701741 + }, + "seconds": 0.040479616, + "status": "pass" }, "ladder/07-fillets/015-corner-g2-patch": { - "seconds": null, + "seconds": 0.002871708, "status": "unsupported" }, "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7": { - "seconds": null, - "status": "unsupported" + "seconds": 0.026357347, + "status": "fail" }, "ladder/07-fillets/017-part-rounds": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 12905.663516135399, + "body_count": 1, + "edges": 59, + "faces": 24, + "vertices": 39, + "volume_mm3": 53151.0192291965 + }, + "seconds": 0.388790715, + "status": "pass" }, "ladder/08-chamfers/001-equal-5": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8599.264068703942, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47250.000000000015 + }, + "seconds": 0.01154789, + "status": "pass" }, "ladder/08-chamfers/002-two-distances-5-3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8654.857113680613, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47550.00000001157 + }, + "seconds": 0.006581516, + "status": "pass" }, "ladder/08-chamfers/003-distance-angle-5-30": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8658.771324025132, + "body_count": 1, + "edges": 15, + "faces": 7, + "vertices": 10, + "volume_mm3": 47566.987298072774 + }, + "seconds": 0.00646942, + "status": "pass" }, "ladder/08-chamfers/004-corner-three-equal-3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8573.97905781626, + "body_count": 1, + "edges": 21, + "faces": 9, + "vertices": 14, + "volume_mm3": 47480.25 + }, + "seconds": 0.009521322, + "status": "pass" }, "ladder/08-chamfers/005-corner-two-mitred-3": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8611.536146650571, + "body_count": 1, + "edges": 17, + "faces": 8, + "vertices": 11, + "volume_mm3": 47559.0 + }, + "seconds": 0.008023283, + "status": "pass" }, "ladder/08-chamfers/006-curved-edge-2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 1806.138314620597, + "body_count": 1, + "edges": 5, + "faces": 4, + "vertices": 3, + "volume_mm3": 6165.898978570243 + }, + "seconds": 0.040025774, + "status": "pass" }, "ladder/08-chamfers/007-chamfer-then-fillets": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8652.794170649633, + "body_count": 1, + "edges": 21, + "faces": 9, + "vertices": 14, + "volume_mm3": 47700.04681392183 + }, + "seconds": 0.027111446, + "status": "pass" }, "ladder/08-chamfers/008-part-chamfers": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 12800.622976693989, + "body_count": 1, + "edges": 64, + "faces": 26, + "vertices": 42, + "volume_mm3": 53006.93294467868 + }, + "seconds": 0.519171731, + "status": "pass" }, "ladder/09-shells-and-offsets/001-box-open-top-t2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 12112.000000000002, + "body_count": 1, + "edges": 24, + "faces": 11, + "vertices": 16, + "volume_mm3": 11712.00000000001 + }, + "seconds": 0.009184408, + "status": "pass" }, "ladder/09-shells-and-offsets/002-cylinder-open-top-t1": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 4153.185490793196, + "body_count": 1, + "edges": 6, + "faces": 5, + "vertices": 4, + "volume_mm3": 2045.1781194378996 + }, + "seconds": 0.054106411, + "status": "pass" }, "ladder/09-shells-and-offsets/003-tube-two-open-faces": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8448.0, + "body_count": 1, + "edges": 24, + "faces": 10, + "vertices": 16, + "volume_mm3": 7680.000000000007 + }, + "seconds": 0.009418953, + "status": "pass" }, "ladder/09-shells-and-offsets/004-thin-wall-0.2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 12728.320000000002, + "body_count": 1, + "edges": 24, + "faces": 11, + "vertices": 16, + "volume_mm3": 1268.8319999999949 + }, + "seconds": 0.016972329, + "status": "pass" }, "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 11804.69049328623, + "body_count": 1, + "edges": 48, + "faces": 19, + "vertices": 32, + "volume_mm3": 11421.860960200946 + }, + "seconds": 0.098389195, + "status": "pass" }, "ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 12075.946992402418, + "body_count": 1, + "edges": 36, + "faces": 15, + "vertices": 24, + "volume_mm3": 11694.832919801527 + }, + "seconds": 0.041722741, + "status": "pass" }, "ladder/09-shells-and-offsets/007-offset-top-face-5": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9800.000000000004, + "body_count": 1, + "edges": 12, + "faces": 6, + "vertices": 8, + "volume_mm3": 60000.00000000002 + }, + "seconds": 0.017068202, + "status": "pass" }, "ladder/09-shells-and-offsets/008-offset-cylinder-wall-2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 2412.743113705001, + "body_count": 1, + "edges": 3, + "faces": 3, + "vertices": 2, + "volume_mm3": 9047.786411660763 + }, + "seconds": 0.040247807, + "status": "pass" }, "ladder/09-shells-and-offsets/009-shell-outside-t2": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 14384.000000000005, + "body_count": 1, + "edges": 24, + "faces": 11, + "vertices": 16, + "volume_mm3": 13952.000000000015 + }, + "seconds": 0.031217512, + "status": "pass" }, "ladder/09-shells-and-offsets/010-shell-under-rounded-top": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 11769.84062599412, + "body_count": 1, + "edges": 40, + "faces": 19, + "vertices": 24, + "volume_mm3": 11375.174354868088 + }, + "seconds": 0.090267208, + "status": "pass" }, "ladder/09-shells-and-offsets/011-part-shell": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 20922.653935613285, + "body_count": 1, + "edges": 140, + "faces": 55, + "vertices": 92, + "volume_mm3": 15397.69748736967 + }, + "seconds": 0.867852336, + "status": "pass" + }, + "ladder/09-shells-and-offsets/012-closed-shell-sealed-void": { + "measured": { + "area_mm2": 15776.0, + "body_count": 1, + "edges": 24, + "faces": 12, + "vertices": 16, + "volume_mm3": 15743.999999999998 + }, + "seconds": 0.008990887, + "status": "pass" + }, + "ladder/09-shells-and-offsets/013-dome-shelled-from-base": { + "measured": { + "area_mm2": 4787.787342099054, + "body_count": 1, + "edges": 4, + "faces": 3, + "vertices": 4, + "volume_mm3": 4540.648982326449 + }, + "seconds": 0.123468649, + "status": "pass" + }, + "ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled": { + "measured": { + "area_mm2": 48232.25453283639, + "body_count": 1, + "edges": 48, + "faces": 19, + "vertices": 32, + "volume_mm3": 47497.57000224123 + }, + "seconds": 0.089872966, + "status": "pass" + }, + "ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back": { + "measured": { + "area_mm2": 5332.688306886705, + "body_count": 1, + "edges": 7, + "faces": 6, + "vertices": 7, + "volume_mm3": 5540.613076260847 + }, + "seconds": 0.691698914, + "status": "pass" }, "ladder/10-patterns-and-mirrors/001-rect-pattern-holes": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 7506.857613724541, + "body_count": 1, + "edges": 30, + "faces": 12, + "vertices": 20, + "volume_mm3": 22821.901949174513 + }, + "seconds": 0.155016195, + "status": "pass" }, "ladder/10-patterns-and-mirrors/002-circular-pattern-holes": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8595.396203488179, + "body_count": 1, + "edges": 27, + "faces": 11, + "vertices": 18, + "volume_mm3": 26012.383532001513 + }, + "seconds": 0.352542366, + "status": "pass" }, "ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 3868.0116581684933, + "body_count": 2, + "edges": 39, + "faces": 17, + "vertices": 26, + "volume_mm3": 9195.866260243196 + }, + "seconds": 0.243903077, + "status": "pass" }, "ladder/10-patterns-and-mirrors/004-mirror-body-joined": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9742.47737488009, + "body_count": 1, + "edges": 18, + "faces": 8, + "vertices": 12, + "volume_mm3": 44858.40293082078 + }, + "seconds": 0.036172974, + "status": "pass" }, "ladder/10-patterns-and-mirrors/005-mirror-feature": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 9742.477396690481, + "body_count": 1, + "edges": 18, + "faces": 8, + "vertices": 12, + "volume_mm3": 44858.4039421837 + }, + "seconds": 0.038690761, + "status": "pass" }, "ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 8472.87515433848, + "body_count": 1, + "edges": 39, + "faces": 21, + "vertices": 26, + "volume_mm3": 26304.552440002004 + }, + "seconds": 0.670372726, + "status": "pass" }, "ladder/10-patterns-and-mirrors/007-pattern-bodies": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 980.1768925219793, + "body_count": 4, + "edges": 12, + "faces": 12, + "vertices": 8, + "volume_mm3": 1130.973281262568 + }, + "seconds": 0.017452188, + "status": "pass" }, "ladder/10-patterns-and-mirrors/008-part-vents": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 20922.653960454496, + "body_count": 1, + "edges": 152, + "faces": 59, + "vertices": 100, + "volume_mm3": 15355.286014502955 + }, + "seconds": 1.468559785, + "status": "pass" }, "ladder/11-cumulative-parts/001-bracket": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 10415.793632553658, + "body_count": 1, + "edges": 30, + "faces": 12, + "vertices": 20, + "volume_mm3": 31550.35228808287 + }, + "seconds": 0.071211606, + "status": "pass" }, "ladder/11-cumulative-parts/002-flange": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 16258.85231664228, + "body_count": 1, + "edges": 31, + "faces": 14, + "vertices": 20, + "volume_mm3": 55442.52558072023 + }, + "seconds": 0.502748653, + "status": "pass" }, "ladder/11-cumulative-parts/003-threaded-flange": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 18059.595491495795, + "body_count": 1, + "edges": 57, + "faces": 22, + "vertices": 38, + "volume_mm3": 52446.67350160611 + }, + "seconds": 1.769302135, + "status": "pass" }, "ladder/11-cumulative-parts/004-housing": { - "seconds": null, - "status": "unsupported" + "measured": { + "area_mm2": 21277.09688631319, + "body_count": 1, + "edges": 172, + "faces": 64, + "vertices": 114, + "volume_mm3": 15051.402626654897 + }, + "seconds": 2.09595716, + "status": "pass" } - } + }, + "reason": "twelve cases for the SMLib and tessellation fixes: point contact, near-coincident and merged faces, horn torus, crossing lofts, sealed and spherical shells" } diff --git a/tests/kernel-cases/ladder/ladder.json b/tests/kernel-cases/ladder/ladder.json index 50a8ebb4b..66cb900cc 100644 --- a/tests/kernel-cases/ladder/ladder.json +++ b/tests/kernel-cases/ladder/ladder.json @@ -3,10 +3,10 @@ { "cases": [ "ladder/01-primitives/001-box", - "ladder/01-primitives/002-cylinder", - "ladder/01-primitives/004-frustum", - "ladder/01-primitives/003-cone", "ladder/01-primitives/005-sphere", + "ladder/01-primitives/003-cone", + "ladder/01-primitives/004-frustum", + "ladder/01-primitives/002-cylinder", "ladder/01-primitives/006-torus" ], "tier": "01-primitives", @@ -15,40 +15,46 @@ { "cases": [ "ladder/02-booleans/004-edge-on-edge-no-overlap", - "ladder/02-booleans/003-pocket-flush-with-top", - "ladder/02-booleans/015-knife-edge-wedge-cut", - "ladder/02-booleans/002-coplanar-overlap-join", - "ladder/02-booleans/019-notch-flush-with-end-face", "ladder/02-booleans/016-v-groove-pinches-bottom-to-line", - "ladder/02-booleans/013-cut-across-cylinder-seam", + "ladder/02-booleans/015-knife-edge-wedge-cut", "ladder/02-booleans/001-coincident-face-join", - "ladder/02-booleans/009-near-tangent-overlap-1e-3", + "ladder/02-booleans/014-cut-through-sphere-pole", "ladder/02-booleans/020-part-back-wall", - "ladder/02-booleans/005-vertex-on-face-no-overlap", - "ladder/02-booleans/018-hole-tangent-to-side-face", - "ladder/02-booleans/010-near-tangent-overlap-1e-6", - "ladder/02-booleans/006-tangent-along-line-no-overlap", + "ladder/02-booleans/003-pocket-flush-with-top", + "ladder/02-booleans/019-notch-flush-with-end-face", + "ladder/02-booleans/002-coplanar-overlap-join", "ladder/02-booleans/008-near-tangent-gap-1e-6", + "ladder/02-booleans/010-near-tangent-overlap-1e-6", "ladder/02-booleans/007-near-tangent-gap-1e-3", "ladder/02-booleans/017-cylinder-tangent-top-and-bottom", + "ladder/02-booleans/006-tangent-along-line-no-overlap", + "ladder/02-booleans/018-hole-tangent-to-side-face", + "ladder/02-booleans/009-near-tangent-overlap-1e-3", + "ladder/02-booleans/005-vertex-on-face-no-overlap", "ladder/02-booleans/011-tangent-along-circle-through-hole", - "ladder/02-booleans/014-cut-through-sphere-pole", - "ladder/02-booleans/012-tangent-along-circle-bowl" + "ladder/02-booleans/013-cut-across-cylinder-seam", + "ladder/02-booleans/012-tangent-along-circle-bowl", + "ladder/02-booleans/022-cylinder-grazing-a-hole-edge", + "ladder/02-booleans/021-holes-touching-at-a-point", + "ladder/02-booleans/023-lips-1e-4-off-the-walls-joined", + "ladder/02-booleans/024-wall-halves-merged-into-a-flange", + "ladder/02-booleans/025-flush-chord-layers-joined" ], "tier": "02-booleans", "what": "booleans in the degeneracy classes, and cuts that end in a single line" }, { "cases": [ - "ladder/03-analytic-profiles/001-extrude-rect-with-arc-end", - "ladder/03-analytic-profiles/003-extrude-tapered-circle", - "ladder/03-analytic-profiles/007-revolve-180-touching-axis", + "ladder/03-analytic-profiles/006-revolve-partial-90", "ladder/03-analytic-profiles/008-extrude-slot", + "ladder/03-analytic-profiles/001-extrude-rect-with-arc-end", + "ladder/03-analytic-profiles/007-revolve-180-touching-axis", "ladder/03-analytic-profiles/002-extrude-annulus", "ladder/03-analytic-profiles/004-revolve-full-off-axis", - "ladder/03-analytic-profiles/006-revolve-partial-90", + "ladder/03-analytic-profiles/003-extrude-tapered-circle", + "ladder/03-analytic-profiles/009-part-boss-and-slot", "ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere", - "ladder/03-analytic-profiles/009-part-boss-and-slot" + "ladder/03-analytic-profiles/010-revolve-horn-torus-270" ], "tier": "03-analytic-profiles", "what": "extrudes and revolves of line-and-arc profiles" @@ -56,32 +62,34 @@ { "cases": [ "ladder/04-spline-profiles/001-extrude-bezier-arch", - "ladder/04-spline-profiles/008-loft-square-to-circle", - "ladder/04-spline-profiles/006-loft-circle-frustum", - "ladder/04-spline-profiles/007-loft-three-circles", "ladder/04-spline-profiles/005-loft-square-frustum", + "ladder/04-spline-profiles/008-loft-square-to-circle", "ladder/04-spline-profiles/009-extrude-periodic-fit-spline", + "ladder/04-spline-profiles/006-loft-circle-frustum", "ladder/04-spline-profiles/004-sweep-square-along-bezier", - "ladder/04-spline-profiles/002-revolve-bezier-profile", + "ladder/04-spline-profiles/007-loft-three-circles", "ladder/04-spline-profiles/003-pipe-along-bezier", - "ladder/04-spline-profiles/010-part-bezier-window" + "ladder/04-spline-profiles/002-revolve-bezier-profile", + "ladder/04-spline-profiles/010-part-bezier-window", + "ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad", + "ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined" ], "tier": "04-spline-profiles", "what": "spline profiles, sweeps and lofts" }, { "cases": [ - "ladder/05-holes-and-taps/010-hole-tangent-to-end-face", - "ladder/05-holes-and-taps/002-simple-blind-flat", - "ladder/05-holes-and-taps/009-hole-0.5-from-edge", - "ladder/05-holes-and-taps/001-simple-through", "ladder/05-holes-and-taps/006-tapped-m6-through", - "ladder/05-holes-and-taps/004-counterbore", - "ladder/05-holes-and-taps/007-tapped-m8-blind", + "ladder/05-holes-and-taps/009-hole-0.5-from-edge", + "ladder/05-holes-and-taps/010-hole-tangent-to-end-face", "ladder/05-holes-and-taps/003-drilled-blind-118", + "ladder/05-holes-and-taps/007-tapped-m8-blind", + "ladder/05-holes-and-taps/002-simple-blind-flat", + "ladder/05-holes-and-taps/001-simple-through", + "ladder/05-holes-and-taps/004-counterbore", "ladder/05-holes-and-taps/005-countersink", - "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face", "ladder/05-holes-and-taps/011-crossing-holes-steinmetz", + "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face", "ladder/05-holes-and-taps/012-crossing-tapped-holes-offset", "ladder/05-holes-and-taps/013-part-holes" ], @@ -91,13 +99,13 @@ { "cases": [ "ladder/06-threads/003-external-m10-partial-length", + "ladder/06-threads/010-part-threaded-boss", "ladder/06-threads/005-internal-m10-through", "ladder/06-threads/004-external-m10-to-shoulder", + "ladder/06-threads/007-external-m10-at-filleted-shoulder", "ladder/06-threads/001-external-m10-full", "ladder/06-threads/006-external-m10-into-chamfer", "ladder/06-threads/002-external-m10x1-fine", - "ladder/06-threads/010-part-threaded-boss", - "ladder/06-threads/007-external-m10-at-filleted-shoulder", "ladder/06-threads/008-multi-start-thread", "ladder/06-threads/009-thread-runout-length" ], @@ -106,21 +114,21 @@ }, { "cases": [ - "ladder/07-fillets/006-variable-r5-to-zero", - "ladder/07-fillets/005-variable-r5-to-r1", - "ladder/07-fillets/007-variable-r5-to-1e-3", "ladder/07-fillets/015-corner-g2-patch", - "ladder/07-fillets/008-constant-r1e-3", - "ladder/07-fillets/004-convex-and-concave-r5", "ladder/07-fillets/001-single-edge-r5", + "ladder/07-fillets/006-variable-r5-to-zero", + "ladder/07-fillets/011-chain-ending-at-corner", + "ladder/07-fillets/005-variable-r5-to-r1", + "ladder/07-fillets/009-corner-three-equal-r5", + "ladder/07-fillets/008-constant-r1e-3", + "ladder/07-fillets/002-four-vertical-edges-r5", + "ladder/07-fillets/007-variable-r5-to-1e-3", + "ladder/07-fillets/010-corner-unequal-r7-r3", + "ladder/07-fillets/004-convex-and-concave-r5", + "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7", "ladder/07-fillets/012-variable-into-rounded-corner", "ladder/07-fillets/014-curved-edge-r2", - "ladder/07-fillets/011-chain-ending-at-corner", - "ladder/07-fillets/002-four-vertical-edges-r5", - "ladder/07-fillets/009-corner-three-equal-r5", - "ladder/07-fillets/010-corner-unequal-r7-r3", "ladder/07-fillets/003-tangent-chain-r3", - "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7", "ladder/07-fillets/017-part-rounds", "ladder/07-fillets/013-corner-setback" ], @@ -129,11 +137,11 @@ }, { "cases": [ - "ladder/08-chamfers/002-two-distances-5-3", - "ladder/08-chamfers/001-equal-5", "ladder/08-chamfers/003-distance-angle-5-30", + "ladder/08-chamfers/002-two-distances-5-3", "ladder/08-chamfers/005-corner-two-mitred-3", "ladder/08-chamfers/004-corner-three-equal-3", + "ladder/08-chamfers/001-equal-5", "ladder/08-chamfers/007-chamfer-then-fillets", "ladder/08-chamfers/006-curved-edge-2", "ladder/08-chamfers/008-part-chamfers" @@ -143,16 +151,20 @@ }, { "cases": [ - "ladder/09-shells-and-offsets/007-offset-top-face-5", - "ladder/09-shells-and-offsets/003-tube-two-open-faces", + "ladder/09-shells-and-offsets/012-closed-shell-sealed-void", "ladder/09-shells-and-offsets/001-box-open-top-t2", + "ladder/09-shells-and-offsets/003-tube-two-open-faces", "ladder/09-shells-and-offsets/004-thin-wall-0.2", + "ladder/09-shells-and-offsets/007-offset-top-face-5", "ladder/09-shells-and-offsets/009-shell-outside-t2", "ladder/09-shells-and-offsets/008-offset-cylinder-wall-2", - "ladder/09-shells-and-offsets/002-cylinder-open-top-t1", "ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2", - "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2", + "ladder/09-shells-and-offsets/002-cylinder-open-top-t1", + "ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled", "ladder/09-shells-and-offsets/010-shell-under-rounded-top", + "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2", + "ladder/09-shells-and-offsets/013-dome-shelled-from-base", + "ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back", "ladder/09-shells-and-offsets/011-part-shell" ], "tier": "09-shells-and-offsets", @@ -161,8 +173,8 @@ { "cases": [ "ladder/10-patterns-and-mirrors/007-pattern-bodies", - "ladder/10-patterns-and-mirrors/005-mirror-feature", "ladder/10-patterns-and-mirrors/004-mirror-body-joined", + "ladder/10-patterns-and-mirrors/005-mirror-feature", "ladder/10-patterns-and-mirrors/001-rect-pattern-holes", "ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core", "ladder/10-patterns-and-mirrors/002-circular-pattern-holes", @@ -174,8 +186,8 @@ }, { "cases": [ - "ladder/11-cumulative-parts/002-flange", "ladder/11-cumulative-parts/001-bracket", + "ladder/11-cumulative-parts/002-flange", "ladder/11-cumulative-parts/003-threaded-flange", "ladder/11-cumulative-parts/004-housing" ],