diff --git a/tests/kernel-cases/fillets/1080-chamfer-equal-slope-basin-1-mm-rim-loop-0-5/expected.json b/tests/kernel-cases/fillets/1080-chamfer-equal-slope-basin-1-mm-rim-loop-0-5/expected.json index b60dcbf4c..84a411bb1 100644 --- a/tests/kernel-cases/fillets/1080-chamfer-equal-slope-basin-1-mm-rim-loop-0-5/expected.json +++ b/tests/kernel-cases/fillets/1080-chamfer-equal-slope-basin-1-mm-rim-loop-0-5/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#1080" ], - "what": "all four top rim edges of a basin whose walls all slope 10 over 20, its front rim 1 mm wide, chamfered 0.5", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 11)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 140333.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four top rim edges of a basin whose walls all slope 10 over 20, its front rim 1 mm wide, chamfered 0.5, mitred at the rim's corners", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 11)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 140333.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), inside its rim; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 24.455545. V = 140308.877788", "body_count": 1, + "volume_mm3": 140308.87778784672, "bbox": { "min": [ 0, @@ -17,5 +18,8 @@ 60, 30 ] + }, + "tolerance": { + "rel": 1e-06 } } diff --git a/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-0-5/expected.json b/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-0-5/expected.json index 0310cbfc2..812adb984 100644 --- a/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-0-5/expected.json +++ b/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-0-5/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#1080" ], - "what": "all four top rim edges of a basin whose walls all slope 10 over 20, its front rim 1 mm wide, rounded R 0.5", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 11)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 140333.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four top rim edges of a basin whose walls all slope 10 over 20, its front rim 1 mm wide, rounded R 0.5, mitred at the rim's corners", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 11)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 140333.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), inside its rim; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 3.517697. V = 140329.815636", "body_count": 1, + "volume_mm3": 140329.8156362336, "bbox": { "min": [ 0, @@ -18,6 +19,9 @@ 30 ] }, + "tolerance": { + "rel": 1e-06 + }, "continuity": { "order": "g1" } diff --git a/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-4/expected.json b/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-4/expected.json index dba45cde0..0e591c728 100644 --- a/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-4/expected.json +++ b/tests/kernel-cases/fillets/1080-fillet-equal-slope-basin-1-mm-rim-loop-4/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#1080" ], - "what": "all four top rim edges of a basin whose walls all slope 10 over 20, its front rim 1 mm wide, rounded R 4: past the rim the front round runs over the slab's front face and is cut from the slab", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 11)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 140333.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four top rim edges of a basin whose walls all slope 10 over 20, its front rim 1 mm wide, rounded R 4, mitred at the rim's corners: past the rim the front round runs over the slab's front face and is cut from the slab", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 11)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 140333.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), the front one not past y = 0, the slab's face; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 218.598188. V = 140114.735145", "body_count": 1, + "volume_mm3": 140114.73514508773, "bbox": { "min": [ 0, @@ -18,6 +19,9 @@ 30 ] }, + "tolerance": { + "rel": 1e-06 + }, "continuity": { "order": "g1" } diff --git a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-0-5-mm-rim-r4-4-edges/expected.json b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-0-5-mm-rim-r4-4-edges/expected.json index 96da661dc..85c6c9343 100644 --- a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-0-5-mm-rim-r4-4-edges/expected.json +++ b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-0-5-mm-rim-r4-4-edges/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#1080" ], - "what": "all four of the top rim edges of a sloped basin with a 0.5 mm front rim rounded R4: past the thin rim the rounds run over the slab's front face and are cut from the slab", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 0.5)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144266.666667. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four of the top rim edges of a sloped basin with a 0.5 mm front rim rounded R4, mitred at the rim's corners: past the thin rim the front round runs over the slab's front face and is cut from the slab", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 0.5)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144266.666667. Each blend's section at height z spans from its wall to its arc (or chamfer line), the front one not past y = 0, the slab's face; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 182.348561. V = 144084.318105", "body_count": 1, + "volume_mm3": 144084.31810540144, "bbox": { "min": [ 0, @@ -18,6 +19,9 @@ 30 ] }, + "tolerance": { + "rel": 1e-06 + }, "continuity": { "order": "g1" } diff --git a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges/expected.json b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges/expected.json index 64ca2aed0..db5ba1bf9 100644 --- a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges/expected.json +++ b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#1080" ], - "what": "all four of the top rim edges of a sloped basin with a 1 mm front rim rounded R0.5", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four of the top rim edges of a sloped basin with a 1 mm front rim rounded R0.5, mitred at the rim's corners", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), inside its rim; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 2.905424. V = 144530.427909", "body_count": 1, + "volume_mm3": 144530.42790890092, "bbox": { "min": [ 0, @@ -18,6 +19,9 @@ 30 ] }, + "tolerance": { + "rel": 1e-06 + }, "continuity": { "order": "g1" } diff --git a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-2-edges/expected.json b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-2-edges/expected.json index 014951154..9aab3d296 100644 --- a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-2-edges/expected.json +++ b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-2-edges/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#1080" ], - "what": "two of the top rim edges of a sloped basin with a 1 mm front rim rounded R4: past the thin rim the rounds run over the slab's front face and are cut from the slab", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "the front and right of the top rim edges of a sloped basin with a 1 mm front rim rounded R4, mitred at the rim's corners: past the thin rim the front round runs over the slab's front face and is cut from the slab", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), the front one not past y = 0, the slab's face; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 72.136985. V = 144461.196348", "body_count": 1, + "volume_mm3": 144461.19634789118, "bbox": { "min": [ 0, @@ -18,6 +19,9 @@ 30 ] }, + "tolerance": { + "rel": 1e-06 + }, "continuity": { "order": "g1" } diff --git a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-4-edges/expected.json b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-4-edges/expected.json index e8997678b..607f238fb 100644 --- a/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-4-edges/expected.json +++ b/tests/kernel-cases/fillets/1080-fillet-sloped-basin-1-mm-rim-r4-4-edges/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#1080" ], - "what": "all four of the top rim edges of a sloped basin with a 1 mm front rim rounded R4: past the thin rim the rounds run over the slab's front face and are cut from the slab", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four of the top rim edges of a sloped basin with a 1 mm front rim rounded R4, mitred at the rim's corners: past the thin rim the front round runs over the slab's front face and is cut from the slab", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), the front one not past y = 0, the slab's face; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 186.007516. V = 144347.325818", "body_count": 1, + "volume_mm3": 144347.32581768231, "bbox": { "min": [ 0, @@ -18,6 +19,9 @@ 30 ] }, + "tolerance": { + "rel": 1e-06 + }, "continuity": { "order": "g1" } diff --git a/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-1-mm-rim-0-5-4-edges/expected.json b/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-1-mm-rim-0-5-4-edges/expected.json index b53c53ca1..7286cc30f 100644 --- a/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-1-mm-rim-0-5-4-edges/expected.json +++ b/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-1-mm-rim-0-5-4-edges/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#5835" ], - "what": "all four of the top rim edges of a sloped basin whose walls slope unequally, its front rim 1 mm wide, chamfered 0.5: the chamfers meet at the rim's corners", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four of the top rim edges of a sloped basin whose walls slope unequally, its front rim 1 mm wide, chamfered 0.5: the chamfers meet in mitres at the rim's corners", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 1)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 144533.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), inside its rim; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 23.167157. V = 144510.166177", "body_count": 1, + "volume_mm3": 144510.1661766051, "bbox": { "min": [ 0, @@ -17,5 +18,8 @@ 60, 30 ] + }, + "tolerance": { + "rel": 1e-06 } } diff --git a/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-2-edges/expected.json b/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-2-edges/expected.json index e9f3a7aa4..61d04c08f 100644 --- a/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-2-edges/expected.json +++ b/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-2-edges/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#5835" ], - "what": "two of the top rim edges of a sloped basin whose walls slope unequally, its front rim 4 mm wide, chamfered 2: the chamfers meet at the rim's corners", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 4)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 146133.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "the front and right of the top rim edges of a sloped basin whose walls slope unequally, its front rim 4 mm wide, chamfered 2: the chamfers meet in mitres at the rim's corners", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 4)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 146133.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), inside its rim; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 176.006388. V = 145957.326945", "body_count": 1, + "volume_mm3": 145957.3269449097, "bbox": { "min": [ 0, @@ -17,5 +18,8 @@ 60, 30 ] + }, + "tolerance": { + "rel": 1e-06 } } diff --git a/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-4-edges/expected.json b/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-4-edges/expected.json index 20cf6a258..aafb6a426 100644 --- a/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-4-edges/expected.json +++ b/tests/kernel-cases/fillets/5835-chamfer-sloped-basin-4-mm-rim-2-4-edges/expected.json @@ -2,10 +2,11 @@ "sources": [ "tangency-labs/solidcraft#5835" ], - "what": "all four of the top rim edges of a sloped basin whose walls slope unequally, its front rim 4 mm wide, chamfered 2: the chamfers meet at the rim's corners", - "source": "invariants", - "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 4)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 146133.333333. the rim's corners are re-entrant (the pocket's corners), where the blends of two sides meet; with sloped walls of different slopes that meeting has no closed form here. Nothing may leave the slab: the box is the slab's, which keeps its outside faces whole.", + "what": "all four of the top rim edges of a sloped basin whose walls slope unequally, its front rim 4 mm wide, chamfered 2: the chamfers meet in mitres at the rim's corners", + "source": "analytic", + "method": "slab 100 x 60 x 30 less the loft from the rectangle (20, 4)-(80, 50) at z = 30 to (30, 20)-(70, 40) at z = 10 (planar walls, a prismatoid: 20/6 (A_top + A_bottom + 4 A_mid)): V0 = 146133.333333. Each blend's section at height z spans from its wall to its arc (or chamfer line), inside its rim; its edge runs between its neighbours' walls (the sloped end walls extended), so it takes Int width(z) length(z) dz. At a re-entrant corner of two picked edges the blends meet in a mitre (the owner's ruling of 2026-10-30): each runs on past the corner and the quadrant beyond both walls loses what both take, Int width_1(z) width_2(z) dz. Removed 370.156402. V = 145763.176931", "body_count": 1, + "volume_mm3": 145763.17693088384, "bbox": { "min": [ 0, @@ -17,5 +18,8 @@ 60, 30 ] + }, + "tolerance": { + "rel": 1e-06 } }