diff --git a/crates/engine/src/boolean_regression_tests.rs b/crates/engine/src/boolean_regression_tests.rs index 0a08e8477..a890f5728 100644 --- a/crates/engine/src/boolean_regression_tests.rs +++ b/crates/engine/src/boolean_regression_tests.rs @@ -176,8 +176,8 @@ fn step_export_of_an_enclosure_with_a_screw_hole_finishes_and_reads_back() { let s = replay(include_str!("../../../examples/regressions/step_export_screw_hole_enclosure.json")); let state = s.model.state(); let body = &state.body("Unterteil").unwrap().body; - // 27 faces; the kernel splits each of the three whole turns (the hole, two standoffs) in two. - assert_eq!(body.face_count(), 30); + // 27 faces, as the file holds them: each whole turn (the hole, two standoffs) is one face. + assert_eq!(body.face_count(), 27); let (text, file_faces) = read_back(&s, body); assert_eq!(text.matches("CYLINDRICAL_SURFACE(").count(), 7, "the seven round faces stay cylinders"); assert_eq!(file_faces, 27); diff --git a/crates/engine/src/face_name_tests.rs b/crates/engine/src/face_name_tests.rs index e2e5b9b13..672d5cc99 100644 --- a/crates/engine/src/face_name_tests.rs +++ b/crates/engine/src/face_name_tests.rs @@ -43,8 +43,8 @@ fn top_and_hole_names(s: &mut Session) -> (String, Vec) { } /// A 60 x 40 x 10 plate with a hole of radius 5: its top face is a rectangle with a hole in it, -/// whose centroid (the plate's middle, (30, 20, 10)) is in the hole; the hole's wall is two half -/// cylinders, whose centroids are inside the cylinder, 2r/π from its axis. +/// whose centroid (the plate's middle, (30, 20, 10)) is in the hole; the hole's wall is one +/// whole cylinder (SMLib's, closed on its seam), whose centroid is on its axis, halfway up. #[test] fn model_faces_gives_a_point_on_each_face_and_the_hole_axis_and_radius() { let mut s = Session::default(); @@ -61,10 +61,10 @@ fn model_faces_gives_a_point_on_each_face_and_the_hole_axis_and_radius() { Some(c) => { let radial = (at.x - 30.0).hypot(at.y - 20.0); assert!((radial - 5.0).abs() < 1e-9 && at.z > 0.0 && at.z < 10.0, "{at:?}"); - // The centroid of a half cylinder's wall is 2r/π = 3.18 from the axis, not on the wall. + // The centroid of a whole cylinder's wall is on its axis, not on the wall. let centroid = vec(&f["centroid"]); let inside = (centroid.x - 30.0).hypot(centroid.y - 20.0); - assert!((2.5..4.0).contains(&inside), "the centroid of a half cylinder is inside it: {inside}"); + assert!(inside < 1e-9 && (centroid.z - 5.0).abs() < 1e-9, "the centroid of the hole's wall is on its axis: {centroid:?}"); // The hole's axis: the line through (30, 20) along z, its radius 5. let (origin, axis) = (vec(&c["origin"]), vec(&c["axis"])); assert!((origin.x - 30.0).abs() < 1e-9 && (origin.y - 20.0).abs() < 1e-9, "{origin:?}"); @@ -122,10 +122,11 @@ fn convert_to_sheet_metal_takes_the_plates_face_by_name() { let span = at.iter().cloned().fold(f64::MIN, f64::max) - at.iter().cloned().fold(f64::MAX, f64::min); assert!(span > 9.8 && span < 10.0 + 1e-6, "{span}"); } - // The plate is still 100 x 60 x 2.5 less the hole: 15000 - π·5²·2.5 = 14803.65 mm³ for a round hole, a little more - // (less than 2% of the hole's 196.35 mm³) for a polygon inside the circle. + // The plate is still 100 x 60 x 2.5 less the hole, which is round: 15000 - π·5²·2.5 = + // 14803.65 mm³, within the measure's accuracy (SMLib's mass properties come within 2e-7 of + // a closed form). let (v, round) = (volume(&mut s, "Plate"), 15000.0 - 25.0 * PI * 2.5); - assert!(v >= round - 1e-6 && v - round < 0.02 * 25.0 * PI * 2.5, "{v}"); + assert!((v - round).abs() < 2e-7 * round, "{v} vs {round}"); } /// Shell, draft and offset face share the parser of Delete Face. @@ -207,8 +208,8 @@ fn offset_face_takes_the_face_by_name() { assert!((volume(&mut s, "Tray") - 100.0 * 60.0 * 35.0).abs() < 1e-6, "{}", volume(&mut s, "Tray")); } -/// A cylinder of radius 10 and height 20 has a side of two half cylinders, each of which -/// `model.faces` describes (its axis and radius); drafting them 5 degrees from the base plane makes +/// A cylinder of radius 10 and height 20 has one side face (SMLib's, closed on its seam), which +/// `model.faces` describes (its axis and radius); drafting it 5 degrees from the base plane makes /// a frustum of radius 10 at the base and 10 - 20 tan 5 degrees at the top. #[test] fn draft_takes_a_cylinders_side_by_name() { @@ -216,7 +217,7 @@ fn draft_takes_a_cylinders_side_by_name() { run(&mut s, "solid.cylinder", json!({"radius": 10, "height": 20, "body_name": "Pin"})); let all = faces(&mut s, "Pin"); let sides: Vec<&Value> = all.iter().filter(|f| f.get("cylinder").is_some()).collect(); - assert_eq!(sides.len(), 2, "two half cylinders: {all:?}"); + assert_eq!(sides.len(), 1, "one side: {all:?}"); for side in &sides { assert!((side["cylinder"]["radius"].as_f64().unwrap_or(f64::NAN) - 10.0).abs() < 1e-9, "{side}"); } diff --git a/crates/engine/src/tests.rs b/crates/engine/src/tests.rs index b4970349b..30cc29c0f 100644 --- a/crates/engine/src/tests.rs +++ b/crates/engine/src/tests.rs @@ -627,7 +627,9 @@ fn extrude_of_adjacent_profiles_has_whole_edges() { assert_eq!(below.len(), 2, "{si}"); run(&mut s, "solid.extrude", json!({"sketch": "Holder", "profiles": below, "distance": 23, "body_name": "Holder"})); let topo = run(&mut s, "model.faces", json!({"body": "Holder"})); - assert_eq!(topo["faces"].as_array().unwrap().len(), 5, "a cut-off cylinder: {topo}"); + // The arc side (one face: SMLib keeps a cylinder's arc of more than half a turn whole), the + // chord's flat side and the two ends. + assert_eq!(topo["faces"].as_array().unwrap().len(), 4, "a cut-off cylinder: {topo}"); let lo = run(&mut s, "inspect.measure", json!({"bodies": ["Holder"]}))["bodies"][0]["bbox"]["min"][1].as_f64().unwrap(); run(&mut s, "solid.move", json!({"bodies": ["Holder"], "translate": [0, -5.0 - lo, 0]})); // The handle: r35 on the Y axis with a bevelled end. @@ -1920,13 +1922,15 @@ fn a_checkpoint_survives_file_new() { run(&mut s, "solid.box", json!({"length": 1.0, "width": 1.0, "height": 1.0})); let id = run(&mut s, "edit.checkpoint", json!({}))["checkpoint"].as_u64().unwrap(); run(&mut s, "file.new", json!({"name": "Replacement"})); + // The volume as SMLib integrates it, to rounding (a unit box measures 1 + 2e-16). + let volume = |s: &mut Session| run(s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64().unwrap_or(f64::NAN); run(&mut s, "solid.box", json!({"length": 2.0, "width": 2.0, "height": 2.0})); - assert_eq!(run(&mut s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64(), Some(8.0)); + assert!((volume(&mut s) - 8.0).abs() < 1e-12); run(&mut s, "edit.restore_checkpoint", json!({"checkpoint": id})); - assert_eq!(run(&mut s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64(), Some(1.0)); + assert!((volume(&mut s) - 1.0).abs() < 1e-12); // The undo history is the restored design's own: one step back is the empty design. run(&mut s, "edit.undo", json!({})); - assert_eq!(run(&mut s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64(), Some(0.0)); + assert!(volume(&mut s).abs() < 1e-12); } #[test] @@ -4432,31 +4436,21 @@ fn creating_a_component_recomputes_nothing() { run(&mut s, "sketch.circle.center", json!({"center": [25, 25], "radius": 2})); run(&mut s, "sketch.finish", json!({})); run(&mut s, "solid.extrude", json!({"sketch": "Post sketch", "to": [25, 25, 10], "operation": "new", "body_name": "Post"})); - // A plate whose top face loses its certificate: a patterned cut, a pad joined flush with - // the top, then one more cut. Extruding that face makes a sketch on a legacy face plane. + // A sketch on a face without a construction certificate: a face extrude on a plate, saved + // as a design from before face attachments were certified (no anchor), and reopened. run(&mut s, "solid.box", json!({"length": 100, "width": 100, "height": 10, "corner": [200, 0, 0], "operation": "new", "body_name": "Plate"})); - run( - &mut s, - "solid.cylinder", - json!({"diameter": 4, "height": 12, "base": [210, 10, -1], "operation": "cut", "targets": ["Plate"], "name": "Pilot"}), - ); - run( - &mut s, - "solid.pattern.rectangular", - json!({"features": ["Pilot"], "dir1": [1, 0, 0], "count1": 4, "spacing1": 20, "dir2": [0, 1, 0], "count2": 4, "spacing2": 20}), - ); - run(&mut s, "sketch.create", json!({"plane": "XY", "offset": "5 mm", "name": "Pad sketch"})); - run(&mut s, "sketch.rectangle.two_point", json!({"p0": [260, 60], "p1": [295, 95]})); - run(&mut s, "sketch.finish", json!({})); - run(&mut s, "solid.extrude", json!({"sketch": "Pad sketch", "distance": 5, "operation": "join", "targets": ["Plate"]})); - run(&mut s, "solid.box", json!({"length": 5, "width": 100, "height": 12, "corner": [199, 0, -1], "operation": "cut", "targets": ["Plate"]})); run(&mut s, "solid.extrude", json!({"face": [240, 40, 10], "distance": 1, "operation": "join", "name": "Face layer"})); - let legacy_face = s - .doc - .features - .iter() - .any(|f| matches!(&f.kind, solidcraft_doc::FeatureKind::Sketch { plane: solidcraft_doc::PlaneRef::Face { anchor: None, .. }, .. })); - assert!(legacy_face, "the face extrude's sketch is on a legacy face plane"); + let mut legacy = (*s.doc).clone(); + let mut legacy_face = false; + for f in &mut legacy.features { + if let solidcraft_doc::FeatureKind::Sketch { plane: solidcraft_doc::PlaneRef::Face { anchor, .. }, .. } = &mut f.kind { + *anchor = None; + legacy_face = true; + } + } + assert!(legacy_face, "the face extrude's sketch is on a face plane"); + let mut s = Session::new(solidcraft_doc::Document::from_json(&legacy.to_json()).unwrap()); + assert!(s.model.results.iter().all(|r| r.error.is_none()), "the legacy design evaluates"); for name in ["First", "Second"] { run(&mut s, "component.create", json!({"name": name})); assert_eq!(s.model.last_recomputed, 0, "creating {name} recomputed a feature");