diff --git a/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/expected.json b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/expected.json new file mode 100644 index 000000000..376ed9cab --- /dev/null +++ b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3447", + "tangency-labs/solidcraft#2979" + ], + "what": "split body where the splitting plane contains an end face (with a boss on it and an R1 fillet on the face's edge)", + "source": "analytic", + "method": "block x -10..-3.5 is 6.5x50x52.7 = 17128.75 minus the R1 fillet along its 52.7 long edge ((1-pi/4)*1^2*52.7 = 11.31); boss 8.5x20x20.2 = 3434.0 stands on x=-3.5 face. The plane x=-3.5 splits them into two bodies: 17117.44 and 3434.0. (The PR measured 17116.17 for the first, within the 1e-3 tolerance.)", + "body_count": 2, + "volume_mm3": 20550.19 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/recipe.json b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/recipe.json new file mode 100644 index 000000000..d787d1242 --- /dev/null +++ b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/recipe.json @@ -0,0 +1,62 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + -10, + 0, + -25 + ], + "length": 6.5, + "width": 50, + "height": 52.7, + "body_name": "Block" + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + -3.5, + 30, + 7.5 + ], + "length": 8.5, + "width": 20, + "height": 20.2, + "operation": "join", + "targets": [ + "Block" + ] + } + }, + { + "command": "solid.fillet", + "params": { + "edges": [ + [ + -3.5, + 0, + 0 + ] + ], + "radius": 1 + } + }, + { + "command": "solid.split_body", + "params": { + "body": "Block", + "tool": { + "body": "Block", + "point": [ + -3.5, + 15, + -10 + ] + } + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/expected.json b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/expected.json new file mode 100644 index 000000000..2aa2922b6 --- /dev/null +++ b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3455" + ], + "what": "one combine of 64 separate pegs that do not touch: 36 s on truck, growing 4-9x per doubling; must finish in seconds", + "source": "analytic", + "method": "64 non-touching 48-gon pegs of circumradius 2, 1 mm tall, 6 mm apart: each area 0.5*48*2^2*sin(2pi/48) = 12.5305, V = 64 * 12.5305 * 1. The join keeps them in one body (several lumps). A hang is a failure: time should grow with the number of bodies. valid is false only because the one body holds 64 separate shells, which the rig's one-shell check does not allow", + "body_count": 1, + "volume_mm3": 801.9529, + "valid": false +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/recipe.json b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/recipe.json new file mode 100644 index 000000000..530e72815 --- /dev/null +++ b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/recipe.json @@ -0,0 +1,12896 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Pegs" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2.0, + 0.0 + ], + [ + 1.9829, + 0.2611 + ], + [ + 1.9319, + 0.5176 + ], + [ + 1.8478, + 0.7654 + ], + [ + 1.7321, + 1.0 + ], + [ + 1.5867, + 1.2175 + ], + [ + 1.4142, + 1.4142 + ], + [ + 1.2175, + 1.5867 + ], + [ + 1.0, + 1.7321 + ], + [ + 0.7654, + 1.8478 + ], + [ + 0.5176, + 1.9319 + ], + [ + 0.2611, + 1.9829 + ], + [ + 0.0, + 2.0 + ], + [ + -0.2611, + 1.9829 + ], + [ + -0.5176, + 1.9319 + ], + [ + -0.7654, + 1.8478 + ], + [ + -1.0, + 1.7321 + ], + [ + -1.2175, + 1.5867 + ], + [ + -1.4142, + 1.4142 + ], + [ + -1.5867, + 1.2175 + ], + [ + -1.7321, + 1.0 + ], + [ + -1.8478, + 0.7654 + ], + [ + -1.9319, + 0.5176 + ], + [ + -1.9829, + 0.2611 + ], + [ + -2.0, + 0.0 + ], + [ + -1.9829, + -0.2611 + ], + [ + -1.9319, + -0.5176 + ], + [ + -1.8478, + -0.7654 + ], + [ + -1.7321, + -1.0 + ], + [ + -1.5867, + -1.2175 + ], + [ + -1.4142, + -1.4142 + ], + [ + -1.2175, + -1.5867 + ], + [ + -1.0, + -1.7321 + ], + [ + -0.7654, + -1.8478 + ], + [ + -0.5176, + -1.9319 + ], + [ + -0.2611, + -1.9829 + ], + [ + -0.0, + -2.0 + ], + [ + 0.2611, + -1.9829 + ], + [ + 0.5176, + -1.9319 + ], + [ + 0.7654, + -1.8478 + ], + [ + 1.0, + -1.7321 + ], + [ + 1.2175, + -1.5867 + ], + [ + 1.4142, + -1.4142 + ], + [ + 1.5867, + -1.2175 + ], + [ + 1.7321, + -1.0 + ], + [ + 1.8478, + -0.7654 + ], + [ + 1.9319, + -0.5176 + ], + [ + 1.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8.0, + 0.0 + ], + [ + 7.9829, + 0.2611 + ], + [ + 7.9319, + 0.5176 + ], + [ + 7.8478, + 0.7654 + ], + [ + 7.7321, + 1.0 + ], + [ + 7.5867, + 1.2175 + ], + [ + 7.4142, + 1.4142 + ], + [ + 7.2175, + 1.5867 + ], + [ + 7.0, + 1.7321 + ], + [ + 6.7654, + 1.8478 + ], + [ + 6.5176, + 1.9319 + ], + [ + 6.2611, + 1.9829 + ], + [ + 6.0, + 2.0 + ], + [ + 5.7389, + 1.9829 + ], + [ + 5.4824, + 1.9319 + ], + [ + 5.2346, + 1.8478 + ], + [ + 5.0, + 1.7321 + ], + [ + 4.7825, + 1.5867 + ], + [ + 4.5858, + 1.4142 + ], + [ + 4.4133, + 1.2175 + ], + [ + 4.2679, + 1.0 + ], + [ + 4.1522, + 0.7654 + ], + [ + 4.0681, + 0.5176 + ], + [ + 4.0171, + 0.2611 + ], + [ + 4.0, + 0.0 + ], + [ + 4.0171, + -0.2611 + ], + [ + 4.0681, + -0.5176 + ], + [ + 4.1522, + -0.7654 + ], + [ + 4.2679, + -1.0 + ], + [ + 4.4133, + -1.2175 + ], + [ + 4.5858, + -1.4142 + ], + [ + 4.7825, + -1.5867 + ], + [ + 5.0, + -1.7321 + ], + [ + 5.2346, + -1.8478 + ], + [ + 5.4824, + -1.9319 + ], + [ + 5.7389, + -1.9829 + ], + [ + 6.0, + -2.0 + ], + [ + 6.2611, + -1.9829 + ], + [ + 6.5176, + -1.9319 + ], + [ + 6.7654, + -1.8478 + ], + [ + 7.0, + -1.7321 + ], + [ + 7.2175, + -1.5867 + ], + [ + 7.4142, + -1.4142 + ], + [ + 7.5867, + -1.2175 + ], + [ + 7.7321, + -1.0 + ], + [ + 7.8478, + -0.7654 + ], + [ + 7.9319, + -0.5176 + ], + [ + 7.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.0, + 0.0 + ], + [ + 13.9829, + 0.2611 + ], + [ + 13.9319, + 0.5176 + ], + [ + 13.8478, + 0.7654 + ], + [ + 13.7321, + 1.0 + ], + [ + 13.5867, + 1.2175 + ], + [ + 13.4142, + 1.4142 + ], + [ + 13.2175, + 1.5867 + ], + [ + 13.0, + 1.7321 + ], + [ + 12.7654, + 1.8478 + ], + [ + 12.5176, + 1.9319 + ], + [ + 12.2611, + 1.9829 + ], + [ + 12.0, + 2.0 + ], + [ + 11.7389, + 1.9829 + ], + [ + 11.4824, + 1.9319 + ], + [ + 11.2346, + 1.8478 + ], + [ + 11.0, + 1.7321 + ], + [ + 10.7825, + 1.5867 + ], + [ + 10.5858, + 1.4142 + ], + [ + 10.4133, + 1.2175 + ], + [ + 10.2679, + 1.0 + ], + [ + 10.1522, + 0.7654 + ], + [ + 10.0681, + 0.5176 + ], + [ + 10.0171, + 0.2611 + ], + [ + 10.0, + 0.0 + ], + [ + 10.0171, + -0.2611 + ], + [ + 10.0681, + -0.5176 + ], + [ + 10.1522, + -0.7654 + ], + [ + 10.2679, + -1.0 + ], + [ + 10.4133, + -1.2175 + ], + [ + 10.5858, + -1.4142 + ], + [ + 10.7825, + -1.5867 + ], + [ + 11.0, + -1.7321 + ], + [ + 11.2346, + -1.8478 + ], + [ + 11.4824, + -1.9319 + ], + [ + 11.7389, + -1.9829 + ], + [ + 12.0, + -2.0 + ], + [ + 12.2611, + -1.9829 + ], + [ + 12.5176, + -1.9319 + ], + [ + 12.7654, + -1.8478 + ], + [ + 13.0, + -1.7321 + ], + [ + 13.2175, + -1.5867 + ], + [ + 13.4142, + -1.4142 + ], + [ + 13.5867, + -1.2175 + ], + [ + 13.7321, + -1.0 + ], + [ + 13.8478, + -0.7654 + ], + [ + 13.9319, + -0.5176 + ], + [ + 13.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20.0, + 0.0 + ], + [ + 19.9829, + 0.2611 + ], + [ + 19.9319, + 0.5176 + ], + [ + 19.8478, + 0.7654 + ], + [ + 19.7321, + 1.0 + ], + [ + 19.5867, + 1.2175 + ], + [ + 19.4142, + 1.4142 + ], + [ + 19.2175, + 1.5867 + ], + [ + 19.0, + 1.7321 + ], + [ + 18.7654, + 1.8478 + ], + [ + 18.5176, + 1.9319 + ], + [ + 18.2611, + 1.9829 + ], + [ + 18.0, + 2.0 + ], + [ + 17.7389, + 1.9829 + ], + [ + 17.4824, + 1.9319 + ], + [ + 17.2346, + 1.8478 + ], + [ + 17.0, + 1.7321 + ], + [ + 16.7825, + 1.5867 + ], + [ + 16.5858, + 1.4142 + ], + [ + 16.4133, + 1.2175 + ], + [ + 16.2679, + 1.0 + ], + [ + 16.1522, + 0.7654 + ], + [ + 16.0681, + 0.5176 + ], + [ + 16.0171, + 0.2611 + ], + [ + 16.0, + 0.0 + ], + [ + 16.0171, + -0.2611 + ], + [ + 16.0681, + -0.5176 + ], + [ + 16.1522, + -0.7654 + ], + [ + 16.2679, + -1.0 + ], + [ + 16.4133, + -1.2175 + ], + [ + 16.5858, + -1.4142 + ], + [ + 16.7825, + -1.5867 + ], + [ + 17.0, + -1.7321 + ], + [ + 17.2346, + -1.8478 + ], + [ + 17.4824, + -1.9319 + ], + [ + 17.7389, + -1.9829 + ], + [ + 18.0, + -2.0 + ], + [ + 18.2611, + -1.9829 + ], + [ + 18.5176, + -1.9319 + ], + [ + 18.7654, + -1.8478 + ], + [ + 19.0, + -1.7321 + ], + [ + 19.2175, + -1.5867 + ], + [ + 19.4142, + -1.4142 + ], + [ + 19.5867, + -1.2175 + ], + [ + 19.7321, + -1.0 + ], + [ + 19.8478, + -0.7654 + ], + [ + 19.9319, + -0.5176 + ], + [ + 19.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 26.0, + 0.0 + ], + [ + 25.9829, + 0.2611 + ], + [ + 25.9319, + 0.5176 + ], + [ + 25.8478, + 0.7654 + ], + [ + 25.7321, + 1.0 + ], + [ + 25.5867, + 1.2175 + ], + [ + 25.4142, + 1.4142 + ], + [ + 25.2175, + 1.5867 + ], + [ + 25.0, + 1.7321 + ], + [ + 24.7654, + 1.8478 + ], + [ + 24.5176, + 1.9319 + ], + [ + 24.2611, + 1.9829 + ], + [ + 24.0, + 2.0 + ], + [ + 23.7389, + 1.9829 + ], + [ + 23.4824, + 1.9319 + ], + [ + 23.2346, + 1.8478 + ], + [ + 23.0, + 1.7321 + ], + [ + 22.7825, + 1.5867 + ], + [ + 22.5858, + 1.4142 + ], + [ + 22.4133, + 1.2175 + ], + [ + 22.2679, + 1.0 + ], + [ + 22.1522, + 0.7654 + ], + [ + 22.0681, + 0.5176 + ], + [ + 22.0171, + 0.2611 + ], + [ + 22.0, + 0.0 + ], + [ + 22.0171, + -0.2611 + ], + [ + 22.0681, + -0.5176 + ], + [ + 22.1522, + -0.7654 + ], + [ + 22.2679, + -1.0 + ], + [ + 22.4133, + -1.2175 + ], + [ + 22.5858, + -1.4142 + ], + [ + 22.7825, + -1.5867 + ], + [ + 23.0, + -1.7321 + ], + [ + 23.2346, + -1.8478 + ], + [ + 23.4824, + -1.9319 + ], + [ + 23.7389, + -1.9829 + ], + [ + 24.0, + -2.0 + ], + [ + 24.2611, + -1.9829 + ], + [ + 24.5176, + -1.9319 + ], + [ + 24.7654, + -1.8478 + ], + [ + 25.0, + -1.7321 + ], + [ + 25.2175, + -1.5867 + ], + [ + 25.4142, + -1.4142 + ], + [ + 25.5867, + -1.2175 + ], + [ + 25.7321, + -1.0 + ], + [ + 25.8478, + -0.7654 + ], + [ + 25.9319, + -0.5176 + ], + [ + 25.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 32.0, + 0.0 + ], + [ + 31.9829, + 0.2611 + ], + [ + 31.9319, + 0.5176 + ], + [ + 31.8478, + 0.7654 + ], + [ + 31.7321, + 1.0 + ], + [ + 31.5867, + 1.2175 + ], + [ + 31.4142, + 1.4142 + ], + [ + 31.2175, + 1.5867 + ], + [ + 31.0, + 1.7321 + ], + [ + 30.7654, + 1.8478 + ], + [ + 30.5176, + 1.9319 + ], + [ + 30.2611, + 1.9829 + ], + [ + 30.0, + 2.0 + ], + [ + 29.7389, + 1.9829 + ], + [ + 29.4824, + 1.9319 + ], + [ + 29.2346, + 1.8478 + ], + [ + 29.0, + 1.7321 + ], + [ + 28.7825, + 1.5867 + ], + [ + 28.5858, + 1.4142 + ], + [ + 28.4133, + 1.2175 + ], + [ + 28.2679, + 1.0 + ], + [ + 28.1522, + 0.7654 + ], + [ + 28.0681, + 0.5176 + ], + [ + 28.0171, + 0.2611 + ], + [ + 28.0, + 0.0 + ], + [ + 28.0171, + -0.2611 + ], + [ + 28.0681, + -0.5176 + ], + [ + 28.1522, + -0.7654 + ], + [ + 28.2679, + -1.0 + ], + [ + 28.4133, + -1.2175 + ], + [ + 28.5858, + -1.4142 + ], + [ + 28.7825, + -1.5867 + ], + [ + 29.0, + -1.7321 + ], + [ + 29.2346, + -1.8478 + ], + [ + 29.4824, + -1.9319 + ], + [ + 29.7389, + -1.9829 + ], + [ + 30.0, + -2.0 + ], + [ + 30.2611, + -1.9829 + ], + [ + 30.5176, + -1.9319 + ], + [ + 30.7654, + -1.8478 + ], + [ + 31.0, + -1.7321 + ], + [ + 31.2175, + -1.5867 + ], + [ + 31.4142, + -1.4142 + ], + [ + 31.5867, + -1.2175 + ], + [ + 31.7321, + -1.0 + ], + [ + 31.8478, + -0.7654 + ], + [ + 31.9319, + -0.5176 + ], + [ + 31.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 38.0, + 0.0 + ], + [ + 37.9829, + 0.2611 + ], + [ + 37.9319, + 0.5176 + ], + [ + 37.8478, + 0.7654 + ], + [ + 37.7321, + 1.0 + ], + [ + 37.5867, + 1.2175 + ], + [ + 37.4142, + 1.4142 + ], + [ + 37.2175, + 1.5867 + ], + [ + 37.0, + 1.7321 + ], + [ + 36.7654, + 1.8478 + ], + [ + 36.5176, + 1.9319 + ], + [ + 36.2611, + 1.9829 + ], + [ + 36.0, + 2.0 + ], + [ + 35.7389, + 1.9829 + ], + [ + 35.4824, + 1.9319 + ], + [ + 35.2346, + 1.8478 + ], + [ + 35.0, + 1.7321 + ], + [ + 34.7825, + 1.5867 + ], + [ + 34.5858, + 1.4142 + ], + [ + 34.4133, + 1.2175 + ], + [ + 34.2679, + 1.0 + ], + [ + 34.1522, + 0.7654 + ], + [ + 34.0681, + 0.5176 + ], + [ + 34.0171, + 0.2611 + ], + [ + 34.0, + 0.0 + ], + [ + 34.0171, + -0.2611 + ], + [ + 34.0681, + -0.5176 + ], + [ + 34.1522, + -0.7654 + ], + [ + 34.2679, + -1.0 + ], + [ + 34.4133, + -1.2175 + ], + [ + 34.5858, + -1.4142 + ], + [ + 34.7825, + -1.5867 + ], + [ + 35.0, + -1.7321 + ], + [ + 35.2346, + -1.8478 + ], + [ + 35.4824, + -1.9319 + ], + [ + 35.7389, + -1.9829 + ], + [ + 36.0, + -2.0 + ], + [ + 36.2611, + -1.9829 + ], + [ + 36.5176, + -1.9319 + ], + [ + 36.7654, + -1.8478 + ], + [ + 37.0, + -1.7321 + ], + [ + 37.2175, + -1.5867 + ], + [ + 37.4142, + -1.4142 + ], + [ + 37.5867, + -1.2175 + ], + [ + 37.7321, + -1.0 + ], + [ + 37.8478, + -0.7654 + ], + [ + 37.9319, + -0.5176 + ], + [ + 37.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 44.0, + 0.0 + ], + [ + 43.9829, + 0.2611 + ], + [ + 43.9319, + 0.5176 + ], + [ + 43.8478, + 0.7654 + ], + [ + 43.7321, + 1.0 + ], + [ + 43.5867, + 1.2175 + ], + [ + 43.4142, + 1.4142 + ], + [ + 43.2175, + 1.5867 + ], + [ + 43.0, + 1.7321 + ], + [ + 42.7654, + 1.8478 + ], + [ + 42.5176, + 1.9319 + ], + [ + 42.2611, + 1.9829 + ], + [ + 42.0, + 2.0 + ], + [ + 41.7389, + 1.9829 + ], + [ + 41.4824, + 1.9319 + ], + [ + 41.2346, + 1.8478 + ], + [ + 41.0, + 1.7321 + ], + [ + 40.7825, + 1.5867 + ], + [ + 40.5858, + 1.4142 + ], + [ + 40.4133, + 1.2175 + ], + [ + 40.2679, + 1.0 + ], + [ + 40.1522, + 0.7654 + ], + [ + 40.0681, + 0.5176 + ], + [ + 40.0171, + 0.2611 + ], + [ + 40.0, + 0.0 + ], + [ + 40.0171, + -0.2611 + ], + [ + 40.0681, + -0.5176 + ], + [ + 40.1522, + -0.7654 + ], + [ + 40.2679, + -1.0 + ], + [ + 40.4133, + -1.2175 + ], + [ + 40.5858, + -1.4142 + ], + [ + 40.7825, + -1.5867 + ], + [ + 41.0, + -1.7321 + ], + [ + 41.2346, + -1.8478 + ], + [ + 41.4824, + -1.9319 + ], + [ + 41.7389, + -1.9829 + ], + [ + 42.0, + -2.0 + ], + [ + 42.2611, + -1.9829 + ], + [ + 42.5176, + -1.9319 + ], + [ + 42.7654, + -1.8478 + ], + [ + 43.0, + -1.7321 + ], + [ + 43.2175, + -1.5867 + ], + [ + 43.4142, + -1.4142 + ], + [ + 43.5867, + -1.2175 + ], + [ + 43.7321, + -1.0 + ], + [ + 43.8478, + -0.7654 + ], + [ + 43.9319, + -0.5176 + ], + [ + 43.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 50.0, + 0.0 + ], + [ + 49.9829, + 0.2611 + ], + [ + 49.9319, + 0.5176 + ], + [ + 49.8478, + 0.7654 + ], + [ + 49.7321, + 1.0 + ], + [ + 49.5867, + 1.2175 + ], + [ + 49.4142, + 1.4142 + ], + [ + 49.2175, + 1.5867 + ], + [ + 49.0, + 1.7321 + ], + [ + 48.7654, + 1.8478 + ], + [ + 48.5176, + 1.9319 + ], + [ + 48.2611, + 1.9829 + ], + [ + 48.0, + 2.0 + ], + [ + 47.7389, + 1.9829 + ], + [ + 47.4824, + 1.9319 + ], + [ + 47.2346, + 1.8478 + ], + [ + 47.0, + 1.7321 + ], + [ + 46.7825, + 1.5867 + ], + [ + 46.5858, + 1.4142 + ], + [ + 46.4133, + 1.2175 + ], + [ + 46.2679, + 1.0 + ], + [ + 46.1522, + 0.7654 + ], + [ + 46.0681, + 0.5176 + ], + [ + 46.0171, + 0.2611 + ], + [ + 46.0, + 0.0 + ], + [ + 46.0171, + -0.2611 + ], + [ + 46.0681, + -0.5176 + ], + [ + 46.1522, + -0.7654 + ], + [ + 46.2679, + -1.0 + ], + [ + 46.4133, + -1.2175 + ], + [ + 46.5858, + -1.4142 + ], + [ + 46.7825, + -1.5867 + ], + [ + 47.0, + -1.7321 + ], + [ + 47.2346, + -1.8478 + ], + [ + 47.4824, + -1.9319 + ], + [ + 47.7389, + -1.9829 + ], + [ + 48.0, + -2.0 + ], + [ + 48.2611, + -1.9829 + ], + [ + 48.5176, + -1.9319 + ], + [ + 48.7654, + -1.8478 + ], + [ + 49.0, + -1.7321 + ], + [ + 49.2175, + -1.5867 + ], + [ + 49.4142, + -1.4142 + ], + [ + 49.5867, + -1.2175 + ], + [ + 49.7321, + -1.0 + ], + [ + 49.8478, + -0.7654 + ], + [ + 49.9319, + -0.5176 + ], + [ + 49.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 56.0, + 0.0 + ], + [ + 55.9829, + 0.2611 + ], + [ + 55.9319, + 0.5176 + ], + [ + 55.8478, + 0.7654 + ], + [ + 55.7321, + 1.0 + ], + [ + 55.5867, + 1.2175 + ], + [ + 55.4142, + 1.4142 + ], + [ + 55.2175, + 1.5867 + ], + [ + 55.0, + 1.7321 + ], + [ + 54.7654, + 1.8478 + ], + [ + 54.5176, + 1.9319 + ], + [ + 54.2611, + 1.9829 + ], + [ + 54.0, + 2.0 + ], + [ + 53.7389, + 1.9829 + ], + [ + 53.4824, + 1.9319 + ], + [ + 53.2346, + 1.8478 + ], + [ + 53.0, + 1.7321 + ], + [ + 52.7825, + 1.5867 + ], + [ + 52.5858, + 1.4142 + ], + [ + 52.4133, + 1.2175 + ], + [ + 52.2679, + 1.0 + ], + [ + 52.1522, + 0.7654 + ], + [ + 52.0681, + 0.5176 + ], + [ + 52.0171, + 0.2611 + ], + [ + 52.0, + 0.0 + ], + [ + 52.0171, + -0.2611 + ], + [ + 52.0681, + -0.5176 + ], + [ + 52.1522, + -0.7654 + ], + [ + 52.2679, + -1.0 + ], + [ + 52.4133, + -1.2175 + ], + [ + 52.5858, + -1.4142 + ], + [ + 52.7825, + -1.5867 + ], + [ + 53.0, + -1.7321 + ], + [ + 53.2346, + -1.8478 + ], + [ + 53.4824, + -1.9319 + ], + [ + 53.7389, + -1.9829 + ], + [ + 54.0, + -2.0 + ], + [ + 54.2611, + -1.9829 + ], + [ + 54.5176, + -1.9319 + ], + [ + 54.7654, + -1.8478 + ], + [ + 55.0, + -1.7321 + ], + [ + 55.2175, + -1.5867 + ], + [ + 55.4142, + -1.4142 + ], + [ + 55.5867, + -1.2175 + ], + [ + 55.7321, + -1.0 + ], + [ + 55.8478, + -0.7654 + ], + [ + 55.9319, + -0.5176 + ], + [ + 55.9829, + -0.2611 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2.0, + 6.0 + ], + [ + 1.9829, + 6.2611 + ], + [ + 1.9319, + 6.5176 + ], + [ + 1.8478, + 6.7654 + ], + [ + 1.7321, + 7.0 + ], + [ + 1.5867, + 7.2175 + ], + [ + 1.4142, + 7.4142 + ], + [ + 1.2175, + 7.5867 + ], + [ + 1.0, + 7.7321 + ], + [ + 0.7654, + 7.8478 + ], + [ + 0.5176, + 7.9319 + ], + [ + 0.2611, + 7.9829 + ], + [ + 0.0, + 8.0 + ], + [ + -0.2611, + 7.9829 + ], + [ + -0.5176, + 7.9319 + ], + [ + -0.7654, + 7.8478 + ], + [ + -1.0, + 7.7321 + ], + [ + -1.2175, + 7.5867 + ], + [ + -1.4142, + 7.4142 + ], + [ + -1.5867, + 7.2175 + ], + [ + -1.7321, + 7.0 + ], + [ + -1.8478, + 6.7654 + ], + [ + -1.9319, + 6.5176 + ], + [ + -1.9829, + 6.2611 + ], + [ + -2.0, + 6.0 + ], + [ + -1.9829, + 5.7389 + ], + [ + -1.9319, + 5.4824 + ], + [ + -1.8478, + 5.2346 + ], + [ + -1.7321, + 5.0 + ], + [ + -1.5867, + 4.7825 + ], + [ + -1.4142, + 4.5858 + ], + [ + -1.2175, + 4.4133 + ], + [ + -1.0, + 4.2679 + ], + [ + -0.7654, + 4.1522 + ], + [ + -0.5176, + 4.0681 + ], + [ + -0.2611, + 4.0171 + ], + [ + -0.0, + 4.0 + ], + [ + 0.2611, + 4.0171 + ], + [ + 0.5176, + 4.0681 + ], + [ + 0.7654, + 4.1522 + ], + [ + 1.0, + 4.2679 + ], + [ + 1.2175, + 4.4133 + ], + [ + 1.4142, + 4.5858 + ], + [ + 1.5867, + 4.7825 + ], + [ + 1.7321, + 5.0 + ], + [ + 1.8478, + 5.2346 + ], + [ + 1.9319, + 5.4824 + ], + [ + 1.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8.0, + 6.0 + ], + [ + 7.9829, + 6.2611 + ], + [ + 7.9319, + 6.5176 + ], + [ + 7.8478, + 6.7654 + ], + [ + 7.7321, + 7.0 + ], + [ + 7.5867, + 7.2175 + ], + [ + 7.4142, + 7.4142 + ], + [ + 7.2175, + 7.5867 + ], + [ + 7.0, + 7.7321 + ], + [ + 6.7654, + 7.8478 + ], + [ + 6.5176, + 7.9319 + ], + [ + 6.2611, + 7.9829 + ], + [ + 6.0, + 8.0 + ], + [ + 5.7389, + 7.9829 + ], + [ + 5.4824, + 7.9319 + ], + [ + 5.2346, + 7.8478 + ], + [ + 5.0, + 7.7321 + ], + [ + 4.7825, + 7.5867 + ], + [ + 4.5858, + 7.4142 + ], + [ + 4.4133, + 7.2175 + ], + [ + 4.2679, + 7.0 + ], + [ + 4.1522, + 6.7654 + ], + [ + 4.0681, + 6.5176 + ], + [ + 4.0171, + 6.2611 + ], + [ + 4.0, + 6.0 + ], + [ + 4.0171, + 5.7389 + ], + [ + 4.0681, + 5.4824 + ], + [ + 4.1522, + 5.2346 + ], + [ + 4.2679, + 5.0 + ], + [ + 4.4133, + 4.7825 + ], + [ + 4.5858, + 4.5858 + ], + [ + 4.7825, + 4.4133 + ], + [ + 5.0, + 4.2679 + ], + [ + 5.2346, + 4.1522 + ], + [ + 5.4824, + 4.0681 + ], + [ + 5.7389, + 4.0171 + ], + [ + 6.0, + 4.0 + ], + [ + 6.2611, + 4.0171 + ], + [ + 6.5176, + 4.0681 + ], + [ + 6.7654, + 4.1522 + ], + [ + 7.0, + 4.2679 + ], + [ + 7.2175, + 4.4133 + ], + [ + 7.4142, + 4.5858 + ], + [ + 7.5867, + 4.7825 + ], + [ + 7.7321, + 5.0 + ], + [ + 7.8478, + 5.2346 + ], + [ + 7.9319, + 5.4824 + ], + [ + 7.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.0, + 6.0 + ], + [ + 13.9829, + 6.2611 + ], + [ + 13.9319, + 6.5176 + ], + [ + 13.8478, + 6.7654 + ], + [ + 13.7321, + 7.0 + ], + [ + 13.5867, + 7.2175 + ], + [ + 13.4142, + 7.4142 + ], + [ + 13.2175, + 7.5867 + ], + [ + 13.0, + 7.7321 + ], + [ + 12.7654, + 7.8478 + ], + [ + 12.5176, + 7.9319 + ], + [ + 12.2611, + 7.9829 + ], + [ + 12.0, + 8.0 + ], + [ + 11.7389, + 7.9829 + ], + [ + 11.4824, + 7.9319 + ], + [ + 11.2346, + 7.8478 + ], + [ + 11.0, + 7.7321 + ], + [ + 10.7825, + 7.5867 + ], + [ + 10.5858, + 7.4142 + ], + [ + 10.4133, + 7.2175 + ], + [ + 10.2679, + 7.0 + ], + [ + 10.1522, + 6.7654 + ], + [ + 10.0681, + 6.5176 + ], + [ + 10.0171, + 6.2611 + ], + [ + 10.0, + 6.0 + ], + [ + 10.0171, + 5.7389 + ], + [ + 10.0681, + 5.4824 + ], + [ + 10.1522, + 5.2346 + ], + [ + 10.2679, + 5.0 + ], + [ + 10.4133, + 4.7825 + ], + [ + 10.5858, + 4.5858 + ], + [ + 10.7825, + 4.4133 + ], + [ + 11.0, + 4.2679 + ], + [ + 11.2346, + 4.1522 + ], + [ + 11.4824, + 4.0681 + ], + [ + 11.7389, + 4.0171 + ], + [ + 12.0, + 4.0 + ], + [ + 12.2611, + 4.0171 + ], + [ + 12.5176, + 4.0681 + ], + [ + 12.7654, + 4.1522 + ], + [ + 13.0, + 4.2679 + ], + [ + 13.2175, + 4.4133 + ], + [ + 13.4142, + 4.5858 + ], + [ + 13.5867, + 4.7825 + ], + [ + 13.7321, + 5.0 + ], + [ + 13.8478, + 5.2346 + ], + [ + 13.9319, + 5.4824 + ], + [ + 13.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20.0, + 6.0 + ], + [ + 19.9829, + 6.2611 + ], + [ + 19.9319, + 6.5176 + ], + [ + 19.8478, + 6.7654 + ], + [ + 19.7321, + 7.0 + ], + [ + 19.5867, + 7.2175 + ], + [ + 19.4142, + 7.4142 + ], + [ + 19.2175, + 7.5867 + ], + [ + 19.0, + 7.7321 + ], + [ + 18.7654, + 7.8478 + ], + [ + 18.5176, + 7.9319 + ], + [ + 18.2611, + 7.9829 + ], + [ + 18.0, + 8.0 + ], + [ + 17.7389, + 7.9829 + ], + [ + 17.4824, + 7.9319 + ], + [ + 17.2346, + 7.8478 + ], + [ + 17.0, + 7.7321 + ], + [ + 16.7825, + 7.5867 + ], + [ + 16.5858, + 7.4142 + ], + [ + 16.4133, + 7.2175 + ], + [ + 16.2679, + 7.0 + ], + [ + 16.1522, + 6.7654 + ], + [ + 16.0681, + 6.5176 + ], + [ + 16.0171, + 6.2611 + ], + [ + 16.0, + 6.0 + ], + [ + 16.0171, + 5.7389 + ], + [ + 16.0681, + 5.4824 + ], + [ + 16.1522, + 5.2346 + ], + [ + 16.2679, + 5.0 + ], + [ + 16.4133, + 4.7825 + ], + [ + 16.5858, + 4.5858 + ], + [ + 16.7825, + 4.4133 + ], + [ + 17.0, + 4.2679 + ], + [ + 17.2346, + 4.1522 + ], + [ + 17.4824, + 4.0681 + ], + [ + 17.7389, + 4.0171 + ], + [ + 18.0, + 4.0 + ], + [ + 18.2611, + 4.0171 + ], + [ + 18.5176, + 4.0681 + ], + [ + 18.7654, + 4.1522 + ], + [ + 19.0, + 4.2679 + ], + [ + 19.2175, + 4.4133 + ], + [ + 19.4142, + 4.5858 + ], + [ + 19.5867, + 4.7825 + ], + [ + 19.7321, + 5.0 + ], + [ + 19.8478, + 5.2346 + ], + [ + 19.9319, + 5.4824 + ], + [ + 19.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 26.0, + 6.0 + ], + [ + 25.9829, + 6.2611 + ], + [ + 25.9319, + 6.5176 + ], + [ + 25.8478, + 6.7654 + ], + [ + 25.7321, + 7.0 + ], + [ + 25.5867, + 7.2175 + ], + [ + 25.4142, + 7.4142 + ], + [ + 25.2175, + 7.5867 + ], + [ + 25.0, + 7.7321 + ], + [ + 24.7654, + 7.8478 + ], + [ + 24.5176, + 7.9319 + ], + [ + 24.2611, + 7.9829 + ], + [ + 24.0, + 8.0 + ], + [ + 23.7389, + 7.9829 + ], + [ + 23.4824, + 7.9319 + ], + [ + 23.2346, + 7.8478 + ], + [ + 23.0, + 7.7321 + ], + [ + 22.7825, + 7.5867 + ], + [ + 22.5858, + 7.4142 + ], + [ + 22.4133, + 7.2175 + ], + [ + 22.2679, + 7.0 + ], + [ + 22.1522, + 6.7654 + ], + [ + 22.0681, + 6.5176 + ], + [ + 22.0171, + 6.2611 + ], + [ + 22.0, + 6.0 + ], + [ + 22.0171, + 5.7389 + ], + [ + 22.0681, + 5.4824 + ], + [ + 22.1522, + 5.2346 + ], + [ + 22.2679, + 5.0 + ], + [ + 22.4133, + 4.7825 + ], + [ + 22.5858, + 4.5858 + ], + [ + 22.7825, + 4.4133 + ], + [ + 23.0, + 4.2679 + ], + [ + 23.2346, + 4.1522 + ], + [ + 23.4824, + 4.0681 + ], + [ + 23.7389, + 4.0171 + ], + [ + 24.0, + 4.0 + ], + [ + 24.2611, + 4.0171 + ], + [ + 24.5176, + 4.0681 + ], + [ + 24.7654, + 4.1522 + ], + [ + 25.0, + 4.2679 + ], + [ + 25.2175, + 4.4133 + ], + [ + 25.4142, + 4.5858 + ], + [ + 25.5867, + 4.7825 + ], + [ + 25.7321, + 5.0 + ], + [ + 25.8478, + 5.2346 + ], + [ + 25.9319, + 5.4824 + ], + [ + 25.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 32.0, + 6.0 + ], + [ + 31.9829, + 6.2611 + ], + [ + 31.9319, + 6.5176 + ], + [ + 31.8478, + 6.7654 + ], + [ + 31.7321, + 7.0 + ], + [ + 31.5867, + 7.2175 + ], + [ + 31.4142, + 7.4142 + ], + [ + 31.2175, + 7.5867 + ], + [ + 31.0, + 7.7321 + ], + [ + 30.7654, + 7.8478 + ], + [ + 30.5176, + 7.9319 + ], + [ + 30.2611, + 7.9829 + ], + [ + 30.0, + 8.0 + ], + [ + 29.7389, + 7.9829 + ], + [ + 29.4824, + 7.9319 + ], + [ + 29.2346, + 7.8478 + ], + [ + 29.0, + 7.7321 + ], + [ + 28.7825, + 7.5867 + ], + [ + 28.5858, + 7.4142 + ], + [ + 28.4133, + 7.2175 + ], + [ + 28.2679, + 7.0 + ], + [ + 28.1522, + 6.7654 + ], + [ + 28.0681, + 6.5176 + ], + [ + 28.0171, + 6.2611 + ], + [ + 28.0, + 6.0 + ], + [ + 28.0171, + 5.7389 + ], + [ + 28.0681, + 5.4824 + ], + [ + 28.1522, + 5.2346 + ], + [ + 28.2679, + 5.0 + ], + [ + 28.4133, + 4.7825 + ], + [ + 28.5858, + 4.5858 + ], + [ + 28.7825, + 4.4133 + ], + [ + 29.0, + 4.2679 + ], + [ + 29.2346, + 4.1522 + ], + [ + 29.4824, + 4.0681 + ], + [ + 29.7389, + 4.0171 + ], + [ + 30.0, + 4.0 + ], + [ + 30.2611, + 4.0171 + ], + [ + 30.5176, + 4.0681 + ], + [ + 30.7654, + 4.1522 + ], + [ + 31.0, + 4.2679 + ], + [ + 31.2175, + 4.4133 + ], + [ + 31.4142, + 4.5858 + ], + [ + 31.5867, + 4.7825 + ], + [ + 31.7321, + 5.0 + ], + [ + 31.8478, + 5.2346 + ], + [ + 31.9319, + 5.4824 + ], + [ + 31.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 38.0, + 6.0 + ], + [ + 37.9829, + 6.2611 + ], + [ + 37.9319, + 6.5176 + ], + [ + 37.8478, + 6.7654 + ], + [ + 37.7321, + 7.0 + ], + [ + 37.5867, + 7.2175 + ], + [ + 37.4142, + 7.4142 + ], + [ + 37.2175, + 7.5867 + ], + [ + 37.0, + 7.7321 + ], + [ + 36.7654, + 7.8478 + ], + [ + 36.5176, + 7.9319 + ], + [ + 36.2611, + 7.9829 + ], + [ + 36.0, + 8.0 + ], + [ + 35.7389, + 7.9829 + ], + [ + 35.4824, + 7.9319 + ], + [ + 35.2346, + 7.8478 + ], + [ + 35.0, + 7.7321 + ], + [ + 34.7825, + 7.5867 + ], + [ + 34.5858, + 7.4142 + ], + [ + 34.4133, + 7.2175 + ], + [ + 34.2679, + 7.0 + ], + [ + 34.1522, + 6.7654 + ], + [ + 34.0681, + 6.5176 + ], + [ + 34.0171, + 6.2611 + ], + [ + 34.0, + 6.0 + ], + [ + 34.0171, + 5.7389 + ], + [ + 34.0681, + 5.4824 + ], + [ + 34.1522, + 5.2346 + ], + [ + 34.2679, + 5.0 + ], + [ + 34.4133, + 4.7825 + ], + [ + 34.5858, + 4.5858 + ], + [ + 34.7825, + 4.4133 + ], + [ + 35.0, + 4.2679 + ], + [ + 35.2346, + 4.1522 + ], + [ + 35.4824, + 4.0681 + ], + [ + 35.7389, + 4.0171 + ], + [ + 36.0, + 4.0 + ], + [ + 36.2611, + 4.0171 + ], + [ + 36.5176, + 4.0681 + ], + [ + 36.7654, + 4.1522 + ], + [ + 37.0, + 4.2679 + ], + [ + 37.2175, + 4.4133 + ], + [ + 37.4142, + 4.5858 + ], + [ + 37.5867, + 4.7825 + ], + [ + 37.7321, + 5.0 + ], + [ + 37.8478, + 5.2346 + ], + [ + 37.9319, + 5.4824 + ], + [ + 37.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 44.0, + 6.0 + ], + [ + 43.9829, + 6.2611 + ], + [ + 43.9319, + 6.5176 + ], + [ + 43.8478, + 6.7654 + ], + [ + 43.7321, + 7.0 + ], + [ + 43.5867, + 7.2175 + ], + [ + 43.4142, + 7.4142 + ], + [ + 43.2175, + 7.5867 + ], + [ + 43.0, + 7.7321 + ], + [ + 42.7654, + 7.8478 + ], + [ + 42.5176, + 7.9319 + ], + [ + 42.2611, + 7.9829 + ], + [ + 42.0, + 8.0 + ], + [ + 41.7389, + 7.9829 + ], + [ + 41.4824, + 7.9319 + ], + [ + 41.2346, + 7.8478 + ], + [ + 41.0, + 7.7321 + ], + [ + 40.7825, + 7.5867 + ], + [ + 40.5858, + 7.4142 + ], + [ + 40.4133, + 7.2175 + ], + [ + 40.2679, + 7.0 + ], + [ + 40.1522, + 6.7654 + ], + [ + 40.0681, + 6.5176 + ], + [ + 40.0171, + 6.2611 + ], + [ + 40.0, + 6.0 + ], + [ + 40.0171, + 5.7389 + ], + [ + 40.0681, + 5.4824 + ], + [ + 40.1522, + 5.2346 + ], + [ + 40.2679, + 5.0 + ], + [ + 40.4133, + 4.7825 + ], + [ + 40.5858, + 4.5858 + ], + [ + 40.7825, + 4.4133 + ], + [ + 41.0, + 4.2679 + ], + [ + 41.2346, + 4.1522 + ], + [ + 41.4824, + 4.0681 + ], + [ + 41.7389, + 4.0171 + ], + [ + 42.0, + 4.0 + ], + [ + 42.2611, + 4.0171 + ], + [ + 42.5176, + 4.0681 + ], + [ + 42.7654, + 4.1522 + ], + [ + 43.0, + 4.2679 + ], + [ + 43.2175, + 4.4133 + ], + [ + 43.4142, + 4.5858 + ], + [ + 43.5867, + 4.7825 + ], + [ + 43.7321, + 5.0 + ], + [ + 43.8478, + 5.2346 + ], + [ + 43.9319, + 5.4824 + ], + [ + 43.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 50.0, + 6.0 + ], + [ + 49.9829, + 6.2611 + ], + [ + 49.9319, + 6.5176 + ], + [ + 49.8478, + 6.7654 + ], + [ + 49.7321, + 7.0 + ], + [ + 49.5867, + 7.2175 + ], + [ + 49.4142, + 7.4142 + ], + [ + 49.2175, + 7.5867 + ], + [ + 49.0, + 7.7321 + ], + [ + 48.7654, + 7.8478 + ], + [ + 48.5176, + 7.9319 + ], + [ + 48.2611, + 7.9829 + ], + [ + 48.0, + 8.0 + ], + [ + 47.7389, + 7.9829 + ], + [ + 47.4824, + 7.9319 + ], + [ + 47.2346, + 7.8478 + ], + [ + 47.0, + 7.7321 + ], + [ + 46.7825, + 7.5867 + ], + [ + 46.5858, + 7.4142 + ], + [ + 46.4133, + 7.2175 + ], + [ + 46.2679, + 7.0 + ], + [ + 46.1522, + 6.7654 + ], + [ + 46.0681, + 6.5176 + ], + [ + 46.0171, + 6.2611 + ], + [ + 46.0, + 6.0 + ], + [ + 46.0171, + 5.7389 + ], + [ + 46.0681, + 5.4824 + ], + [ + 46.1522, + 5.2346 + ], + [ + 46.2679, + 5.0 + ], + [ + 46.4133, + 4.7825 + ], + [ + 46.5858, + 4.5858 + ], + [ + 46.7825, + 4.4133 + ], + [ + 47.0, + 4.2679 + ], + [ + 47.2346, + 4.1522 + ], + [ + 47.4824, + 4.0681 + ], + [ + 47.7389, + 4.0171 + ], + [ + 48.0, + 4.0 + ], + [ + 48.2611, + 4.0171 + ], + [ + 48.5176, + 4.0681 + ], + [ + 48.7654, + 4.1522 + ], + [ + 49.0, + 4.2679 + ], + [ + 49.2175, + 4.4133 + ], + [ + 49.4142, + 4.5858 + ], + [ + 49.5867, + 4.7825 + ], + [ + 49.7321, + 5.0 + ], + [ + 49.8478, + 5.2346 + ], + [ + 49.9319, + 5.4824 + ], + [ + 49.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 56.0, + 6.0 + ], + [ + 55.9829, + 6.2611 + ], + [ + 55.9319, + 6.5176 + ], + [ + 55.8478, + 6.7654 + ], + [ + 55.7321, + 7.0 + ], + [ + 55.5867, + 7.2175 + ], + [ + 55.4142, + 7.4142 + ], + [ + 55.2175, + 7.5867 + ], + [ + 55.0, + 7.7321 + ], + [ + 54.7654, + 7.8478 + ], + [ + 54.5176, + 7.9319 + ], + [ + 54.2611, + 7.9829 + ], + [ + 54.0, + 8.0 + ], + [ + 53.7389, + 7.9829 + ], + [ + 53.4824, + 7.9319 + ], + [ + 53.2346, + 7.8478 + ], + [ + 53.0, + 7.7321 + ], + [ + 52.7825, + 7.5867 + ], + [ + 52.5858, + 7.4142 + ], + [ + 52.4133, + 7.2175 + ], + [ + 52.2679, + 7.0 + ], + [ + 52.1522, + 6.7654 + ], + [ + 52.0681, + 6.5176 + ], + [ + 52.0171, + 6.2611 + ], + [ + 52.0, + 6.0 + ], + [ + 52.0171, + 5.7389 + ], + [ + 52.0681, + 5.4824 + ], + [ + 52.1522, + 5.2346 + ], + [ + 52.2679, + 5.0 + ], + [ + 52.4133, + 4.7825 + ], + [ + 52.5858, + 4.5858 + ], + [ + 52.7825, + 4.4133 + ], + [ + 53.0, + 4.2679 + ], + [ + 53.2346, + 4.1522 + ], + [ + 53.4824, + 4.0681 + ], + [ + 53.7389, + 4.0171 + ], + [ + 54.0, + 4.0 + ], + [ + 54.2611, + 4.0171 + ], + [ + 54.5176, + 4.0681 + ], + [ + 54.7654, + 4.1522 + ], + [ + 55.0, + 4.2679 + ], + [ + 55.2175, + 4.4133 + ], + [ + 55.4142, + 4.5858 + ], + [ + 55.5867, + 4.7825 + ], + [ + 55.7321, + 5.0 + ], + [ + 55.8478, + 5.2346 + ], + [ + 55.9319, + 5.4824 + ], + [ + 55.9829, + 5.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2.0, + 12.0 + ], + [ + 1.9829, + 12.2611 + ], + [ + 1.9319, + 12.5176 + ], + [ + 1.8478, + 12.7654 + ], + [ + 1.7321, + 13.0 + ], + [ + 1.5867, + 13.2175 + ], + [ + 1.4142, + 13.4142 + ], + [ + 1.2175, + 13.5867 + ], + [ + 1.0, + 13.7321 + ], + [ + 0.7654, + 13.8478 + ], + [ + 0.5176, + 13.9319 + ], + [ + 0.2611, + 13.9829 + ], + [ + 0.0, + 14.0 + ], + [ + -0.2611, + 13.9829 + ], + [ + -0.5176, + 13.9319 + ], + [ + -0.7654, + 13.8478 + ], + [ + -1.0, + 13.7321 + ], + [ + -1.2175, + 13.5867 + ], + [ + -1.4142, + 13.4142 + ], + [ + -1.5867, + 13.2175 + ], + [ + -1.7321, + 13.0 + ], + [ + -1.8478, + 12.7654 + ], + [ + -1.9319, + 12.5176 + ], + [ + -1.9829, + 12.2611 + ], + [ + -2.0, + 12.0 + ], + [ + -1.9829, + 11.7389 + ], + [ + -1.9319, + 11.4824 + ], + [ + -1.8478, + 11.2346 + ], + [ + -1.7321, + 11.0 + ], + [ + -1.5867, + 10.7825 + ], + [ + -1.4142, + 10.5858 + ], + [ + -1.2175, + 10.4133 + ], + [ + -1.0, + 10.2679 + ], + [ + -0.7654, + 10.1522 + ], + [ + -0.5176, + 10.0681 + ], + [ + -0.2611, + 10.0171 + ], + [ + -0.0, + 10.0 + ], + [ + 0.2611, + 10.0171 + ], + [ + 0.5176, + 10.0681 + ], + [ + 0.7654, + 10.1522 + ], + [ + 1.0, + 10.2679 + ], + [ + 1.2175, + 10.4133 + ], + [ + 1.4142, + 10.5858 + ], + [ + 1.5867, + 10.7825 + ], + [ + 1.7321, + 11.0 + ], + [ + 1.8478, + 11.2346 + ], + [ + 1.9319, + 11.4824 + ], + [ + 1.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8.0, + 12.0 + ], + [ + 7.9829, + 12.2611 + ], + [ + 7.9319, + 12.5176 + ], + [ + 7.8478, + 12.7654 + ], + [ + 7.7321, + 13.0 + ], + [ + 7.5867, + 13.2175 + ], + [ + 7.4142, + 13.4142 + ], + [ + 7.2175, + 13.5867 + ], + [ + 7.0, + 13.7321 + ], + [ + 6.7654, + 13.8478 + ], + [ + 6.5176, + 13.9319 + ], + [ + 6.2611, + 13.9829 + ], + [ + 6.0, + 14.0 + ], + [ + 5.7389, + 13.9829 + ], + [ + 5.4824, + 13.9319 + ], + [ + 5.2346, + 13.8478 + ], + [ + 5.0, + 13.7321 + ], + [ + 4.7825, + 13.5867 + ], + [ + 4.5858, + 13.4142 + ], + [ + 4.4133, + 13.2175 + ], + [ + 4.2679, + 13.0 + ], + [ + 4.1522, + 12.7654 + ], + [ + 4.0681, + 12.5176 + ], + [ + 4.0171, + 12.2611 + ], + [ + 4.0, + 12.0 + ], + [ + 4.0171, + 11.7389 + ], + [ + 4.0681, + 11.4824 + ], + [ + 4.1522, + 11.2346 + ], + [ + 4.2679, + 11.0 + ], + [ + 4.4133, + 10.7825 + ], + [ + 4.5858, + 10.5858 + ], + [ + 4.7825, + 10.4133 + ], + [ + 5.0, + 10.2679 + ], + [ + 5.2346, + 10.1522 + ], + [ + 5.4824, + 10.0681 + ], + [ + 5.7389, + 10.0171 + ], + [ + 6.0, + 10.0 + ], + [ + 6.2611, + 10.0171 + ], + [ + 6.5176, + 10.0681 + ], + [ + 6.7654, + 10.1522 + ], + [ + 7.0, + 10.2679 + ], + [ + 7.2175, + 10.4133 + ], + [ + 7.4142, + 10.5858 + ], + [ + 7.5867, + 10.7825 + ], + [ + 7.7321, + 11.0 + ], + [ + 7.8478, + 11.2346 + ], + [ + 7.9319, + 11.4824 + ], + [ + 7.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.0, + 12.0 + ], + [ + 13.9829, + 12.2611 + ], + [ + 13.9319, + 12.5176 + ], + [ + 13.8478, + 12.7654 + ], + [ + 13.7321, + 13.0 + ], + [ + 13.5867, + 13.2175 + ], + [ + 13.4142, + 13.4142 + ], + [ + 13.2175, + 13.5867 + ], + [ + 13.0, + 13.7321 + ], + [ + 12.7654, + 13.8478 + ], + [ + 12.5176, + 13.9319 + ], + [ + 12.2611, + 13.9829 + ], + [ + 12.0, + 14.0 + ], + [ + 11.7389, + 13.9829 + ], + [ + 11.4824, + 13.9319 + ], + [ + 11.2346, + 13.8478 + ], + [ + 11.0, + 13.7321 + ], + [ + 10.7825, + 13.5867 + ], + [ + 10.5858, + 13.4142 + ], + [ + 10.4133, + 13.2175 + ], + [ + 10.2679, + 13.0 + ], + [ + 10.1522, + 12.7654 + ], + [ + 10.0681, + 12.5176 + ], + [ + 10.0171, + 12.2611 + ], + [ + 10.0, + 12.0 + ], + [ + 10.0171, + 11.7389 + ], + [ + 10.0681, + 11.4824 + ], + [ + 10.1522, + 11.2346 + ], + [ + 10.2679, + 11.0 + ], + [ + 10.4133, + 10.7825 + ], + [ + 10.5858, + 10.5858 + ], + [ + 10.7825, + 10.4133 + ], + [ + 11.0, + 10.2679 + ], + [ + 11.2346, + 10.1522 + ], + [ + 11.4824, + 10.0681 + ], + [ + 11.7389, + 10.0171 + ], + [ + 12.0, + 10.0 + ], + [ + 12.2611, + 10.0171 + ], + [ + 12.5176, + 10.0681 + ], + [ + 12.7654, + 10.1522 + ], + [ + 13.0, + 10.2679 + ], + [ + 13.2175, + 10.4133 + ], + [ + 13.4142, + 10.5858 + ], + [ + 13.5867, + 10.7825 + ], + [ + 13.7321, + 11.0 + ], + [ + 13.8478, + 11.2346 + ], + [ + 13.9319, + 11.4824 + ], + [ + 13.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20.0, + 12.0 + ], + [ + 19.9829, + 12.2611 + ], + [ + 19.9319, + 12.5176 + ], + [ + 19.8478, + 12.7654 + ], + [ + 19.7321, + 13.0 + ], + [ + 19.5867, + 13.2175 + ], + [ + 19.4142, + 13.4142 + ], + [ + 19.2175, + 13.5867 + ], + [ + 19.0, + 13.7321 + ], + [ + 18.7654, + 13.8478 + ], + [ + 18.5176, + 13.9319 + ], + [ + 18.2611, + 13.9829 + ], + [ + 18.0, + 14.0 + ], + [ + 17.7389, + 13.9829 + ], + [ + 17.4824, + 13.9319 + ], + [ + 17.2346, + 13.8478 + ], + [ + 17.0, + 13.7321 + ], + [ + 16.7825, + 13.5867 + ], + [ + 16.5858, + 13.4142 + ], + [ + 16.4133, + 13.2175 + ], + [ + 16.2679, + 13.0 + ], + [ + 16.1522, + 12.7654 + ], + [ + 16.0681, + 12.5176 + ], + [ + 16.0171, + 12.2611 + ], + [ + 16.0, + 12.0 + ], + [ + 16.0171, + 11.7389 + ], + [ + 16.0681, + 11.4824 + ], + [ + 16.1522, + 11.2346 + ], + [ + 16.2679, + 11.0 + ], + [ + 16.4133, + 10.7825 + ], + [ + 16.5858, + 10.5858 + ], + [ + 16.7825, + 10.4133 + ], + [ + 17.0, + 10.2679 + ], + [ + 17.2346, + 10.1522 + ], + [ + 17.4824, + 10.0681 + ], + [ + 17.7389, + 10.0171 + ], + [ + 18.0, + 10.0 + ], + [ + 18.2611, + 10.0171 + ], + [ + 18.5176, + 10.0681 + ], + [ + 18.7654, + 10.1522 + ], + [ + 19.0, + 10.2679 + ], + [ + 19.2175, + 10.4133 + ], + [ + 19.4142, + 10.5858 + ], + [ + 19.5867, + 10.7825 + ], + [ + 19.7321, + 11.0 + ], + [ + 19.8478, + 11.2346 + ], + [ + 19.9319, + 11.4824 + ], + [ + 19.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 26.0, + 12.0 + ], + [ + 25.9829, + 12.2611 + ], + [ + 25.9319, + 12.5176 + ], + [ + 25.8478, + 12.7654 + ], + [ + 25.7321, + 13.0 + ], + [ + 25.5867, + 13.2175 + ], + [ + 25.4142, + 13.4142 + ], + [ + 25.2175, + 13.5867 + ], + [ + 25.0, + 13.7321 + ], + [ + 24.7654, + 13.8478 + ], + [ + 24.5176, + 13.9319 + ], + [ + 24.2611, + 13.9829 + ], + [ + 24.0, + 14.0 + ], + [ + 23.7389, + 13.9829 + ], + [ + 23.4824, + 13.9319 + ], + [ + 23.2346, + 13.8478 + ], + [ + 23.0, + 13.7321 + ], + [ + 22.7825, + 13.5867 + ], + [ + 22.5858, + 13.4142 + ], + [ + 22.4133, + 13.2175 + ], + [ + 22.2679, + 13.0 + ], + [ + 22.1522, + 12.7654 + ], + [ + 22.0681, + 12.5176 + ], + [ + 22.0171, + 12.2611 + ], + [ + 22.0, + 12.0 + ], + [ + 22.0171, + 11.7389 + ], + [ + 22.0681, + 11.4824 + ], + [ + 22.1522, + 11.2346 + ], + [ + 22.2679, + 11.0 + ], + [ + 22.4133, + 10.7825 + ], + [ + 22.5858, + 10.5858 + ], + [ + 22.7825, + 10.4133 + ], + [ + 23.0, + 10.2679 + ], + [ + 23.2346, + 10.1522 + ], + [ + 23.4824, + 10.0681 + ], + [ + 23.7389, + 10.0171 + ], + [ + 24.0, + 10.0 + ], + [ + 24.2611, + 10.0171 + ], + [ + 24.5176, + 10.0681 + ], + [ + 24.7654, + 10.1522 + ], + [ + 25.0, + 10.2679 + ], + [ + 25.2175, + 10.4133 + ], + [ + 25.4142, + 10.5858 + ], + [ + 25.5867, + 10.7825 + ], + [ + 25.7321, + 11.0 + ], + [ + 25.8478, + 11.2346 + ], + [ + 25.9319, + 11.4824 + ], + [ + 25.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 32.0, + 12.0 + ], + [ + 31.9829, + 12.2611 + ], + [ + 31.9319, + 12.5176 + ], + [ + 31.8478, + 12.7654 + ], + [ + 31.7321, + 13.0 + ], + [ + 31.5867, + 13.2175 + ], + [ + 31.4142, + 13.4142 + ], + [ + 31.2175, + 13.5867 + ], + [ + 31.0, + 13.7321 + ], + [ + 30.7654, + 13.8478 + ], + [ + 30.5176, + 13.9319 + ], + [ + 30.2611, + 13.9829 + ], + [ + 30.0, + 14.0 + ], + [ + 29.7389, + 13.9829 + ], + [ + 29.4824, + 13.9319 + ], + [ + 29.2346, + 13.8478 + ], + [ + 29.0, + 13.7321 + ], + [ + 28.7825, + 13.5867 + ], + [ + 28.5858, + 13.4142 + ], + [ + 28.4133, + 13.2175 + ], + [ + 28.2679, + 13.0 + ], + [ + 28.1522, + 12.7654 + ], + [ + 28.0681, + 12.5176 + ], + [ + 28.0171, + 12.2611 + ], + [ + 28.0, + 12.0 + ], + [ + 28.0171, + 11.7389 + ], + [ + 28.0681, + 11.4824 + ], + [ + 28.1522, + 11.2346 + ], + [ + 28.2679, + 11.0 + ], + [ + 28.4133, + 10.7825 + ], + [ + 28.5858, + 10.5858 + ], + [ + 28.7825, + 10.4133 + ], + [ + 29.0, + 10.2679 + ], + [ + 29.2346, + 10.1522 + ], + [ + 29.4824, + 10.0681 + ], + [ + 29.7389, + 10.0171 + ], + [ + 30.0, + 10.0 + ], + [ + 30.2611, + 10.0171 + ], + [ + 30.5176, + 10.0681 + ], + [ + 30.7654, + 10.1522 + ], + [ + 31.0, + 10.2679 + ], + [ + 31.2175, + 10.4133 + ], + [ + 31.4142, + 10.5858 + ], + [ + 31.5867, + 10.7825 + ], + [ + 31.7321, + 11.0 + ], + [ + 31.8478, + 11.2346 + ], + [ + 31.9319, + 11.4824 + ], + [ + 31.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 38.0, + 12.0 + ], + [ + 37.9829, + 12.2611 + ], + [ + 37.9319, + 12.5176 + ], + [ + 37.8478, + 12.7654 + ], + [ + 37.7321, + 13.0 + ], + [ + 37.5867, + 13.2175 + ], + [ + 37.4142, + 13.4142 + ], + [ + 37.2175, + 13.5867 + ], + [ + 37.0, + 13.7321 + ], + [ + 36.7654, + 13.8478 + ], + [ + 36.5176, + 13.9319 + ], + [ + 36.2611, + 13.9829 + ], + [ + 36.0, + 14.0 + ], + [ + 35.7389, + 13.9829 + ], + [ + 35.4824, + 13.9319 + ], + [ + 35.2346, + 13.8478 + ], + [ + 35.0, + 13.7321 + ], + [ + 34.7825, + 13.5867 + ], + [ + 34.5858, + 13.4142 + ], + [ + 34.4133, + 13.2175 + ], + [ + 34.2679, + 13.0 + ], + [ + 34.1522, + 12.7654 + ], + [ + 34.0681, + 12.5176 + ], + [ + 34.0171, + 12.2611 + ], + [ + 34.0, + 12.0 + ], + [ + 34.0171, + 11.7389 + ], + [ + 34.0681, + 11.4824 + ], + [ + 34.1522, + 11.2346 + ], + [ + 34.2679, + 11.0 + ], + [ + 34.4133, + 10.7825 + ], + [ + 34.5858, + 10.5858 + ], + [ + 34.7825, + 10.4133 + ], + [ + 35.0, + 10.2679 + ], + [ + 35.2346, + 10.1522 + ], + [ + 35.4824, + 10.0681 + ], + [ + 35.7389, + 10.0171 + ], + [ + 36.0, + 10.0 + ], + [ + 36.2611, + 10.0171 + ], + [ + 36.5176, + 10.0681 + ], + [ + 36.7654, + 10.1522 + ], + [ + 37.0, + 10.2679 + ], + [ + 37.2175, + 10.4133 + ], + [ + 37.4142, + 10.5858 + ], + [ + 37.5867, + 10.7825 + ], + [ + 37.7321, + 11.0 + ], + [ + 37.8478, + 11.2346 + ], + [ + 37.9319, + 11.4824 + ], + [ + 37.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 44.0, + 12.0 + ], + [ + 43.9829, + 12.2611 + ], + [ + 43.9319, + 12.5176 + ], + [ + 43.8478, + 12.7654 + ], + [ + 43.7321, + 13.0 + ], + [ + 43.5867, + 13.2175 + ], + [ + 43.4142, + 13.4142 + ], + [ + 43.2175, + 13.5867 + ], + [ + 43.0, + 13.7321 + ], + [ + 42.7654, + 13.8478 + ], + [ + 42.5176, + 13.9319 + ], + [ + 42.2611, + 13.9829 + ], + [ + 42.0, + 14.0 + ], + [ + 41.7389, + 13.9829 + ], + [ + 41.4824, + 13.9319 + ], + [ + 41.2346, + 13.8478 + ], + [ + 41.0, + 13.7321 + ], + [ + 40.7825, + 13.5867 + ], + [ + 40.5858, + 13.4142 + ], + [ + 40.4133, + 13.2175 + ], + [ + 40.2679, + 13.0 + ], + [ + 40.1522, + 12.7654 + ], + [ + 40.0681, + 12.5176 + ], + [ + 40.0171, + 12.2611 + ], + [ + 40.0, + 12.0 + ], + [ + 40.0171, + 11.7389 + ], + [ + 40.0681, + 11.4824 + ], + [ + 40.1522, + 11.2346 + ], + [ + 40.2679, + 11.0 + ], + [ + 40.4133, + 10.7825 + ], + [ + 40.5858, + 10.5858 + ], + [ + 40.7825, + 10.4133 + ], + [ + 41.0, + 10.2679 + ], + [ + 41.2346, + 10.1522 + ], + [ + 41.4824, + 10.0681 + ], + [ + 41.7389, + 10.0171 + ], + [ + 42.0, + 10.0 + ], + [ + 42.2611, + 10.0171 + ], + [ + 42.5176, + 10.0681 + ], + [ + 42.7654, + 10.1522 + ], + [ + 43.0, + 10.2679 + ], + [ + 43.2175, + 10.4133 + ], + [ + 43.4142, + 10.5858 + ], + [ + 43.5867, + 10.7825 + ], + [ + 43.7321, + 11.0 + ], + [ + 43.8478, + 11.2346 + ], + [ + 43.9319, + 11.4824 + ], + [ + 43.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 50.0, + 12.0 + ], + [ + 49.9829, + 12.2611 + ], + [ + 49.9319, + 12.5176 + ], + [ + 49.8478, + 12.7654 + ], + [ + 49.7321, + 13.0 + ], + [ + 49.5867, + 13.2175 + ], + [ + 49.4142, + 13.4142 + ], + [ + 49.2175, + 13.5867 + ], + [ + 49.0, + 13.7321 + ], + [ + 48.7654, + 13.8478 + ], + [ + 48.5176, + 13.9319 + ], + [ + 48.2611, + 13.9829 + ], + [ + 48.0, + 14.0 + ], + [ + 47.7389, + 13.9829 + ], + [ + 47.4824, + 13.9319 + ], + [ + 47.2346, + 13.8478 + ], + [ + 47.0, + 13.7321 + ], + [ + 46.7825, + 13.5867 + ], + [ + 46.5858, + 13.4142 + ], + [ + 46.4133, + 13.2175 + ], + [ + 46.2679, + 13.0 + ], + [ + 46.1522, + 12.7654 + ], + [ + 46.0681, + 12.5176 + ], + [ + 46.0171, + 12.2611 + ], + [ + 46.0, + 12.0 + ], + [ + 46.0171, + 11.7389 + ], + [ + 46.0681, + 11.4824 + ], + [ + 46.1522, + 11.2346 + ], + [ + 46.2679, + 11.0 + ], + [ + 46.4133, + 10.7825 + ], + [ + 46.5858, + 10.5858 + ], + [ + 46.7825, + 10.4133 + ], + [ + 47.0, + 10.2679 + ], + [ + 47.2346, + 10.1522 + ], + [ + 47.4824, + 10.0681 + ], + [ + 47.7389, + 10.0171 + ], + [ + 48.0, + 10.0 + ], + [ + 48.2611, + 10.0171 + ], + [ + 48.5176, + 10.0681 + ], + [ + 48.7654, + 10.1522 + ], + [ + 49.0, + 10.2679 + ], + [ + 49.2175, + 10.4133 + ], + [ + 49.4142, + 10.5858 + ], + [ + 49.5867, + 10.7825 + ], + [ + 49.7321, + 11.0 + ], + [ + 49.8478, + 11.2346 + ], + [ + 49.9319, + 11.4824 + ], + [ + 49.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 56.0, + 12.0 + ], + [ + 55.9829, + 12.2611 + ], + [ + 55.9319, + 12.5176 + ], + [ + 55.8478, + 12.7654 + ], + [ + 55.7321, + 13.0 + ], + [ + 55.5867, + 13.2175 + ], + [ + 55.4142, + 13.4142 + ], + [ + 55.2175, + 13.5867 + ], + [ + 55.0, + 13.7321 + ], + [ + 54.7654, + 13.8478 + ], + [ + 54.5176, + 13.9319 + ], + [ + 54.2611, + 13.9829 + ], + [ + 54.0, + 14.0 + ], + [ + 53.7389, + 13.9829 + ], + [ + 53.4824, + 13.9319 + ], + [ + 53.2346, + 13.8478 + ], + [ + 53.0, + 13.7321 + ], + [ + 52.7825, + 13.5867 + ], + [ + 52.5858, + 13.4142 + ], + [ + 52.4133, + 13.2175 + ], + [ + 52.2679, + 13.0 + ], + [ + 52.1522, + 12.7654 + ], + [ + 52.0681, + 12.5176 + ], + [ + 52.0171, + 12.2611 + ], + [ + 52.0, + 12.0 + ], + [ + 52.0171, + 11.7389 + ], + [ + 52.0681, + 11.4824 + ], + [ + 52.1522, + 11.2346 + ], + [ + 52.2679, + 11.0 + ], + [ + 52.4133, + 10.7825 + ], + [ + 52.5858, + 10.5858 + ], + [ + 52.7825, + 10.4133 + ], + [ + 53.0, + 10.2679 + ], + [ + 53.2346, + 10.1522 + ], + [ + 53.4824, + 10.0681 + ], + [ + 53.7389, + 10.0171 + ], + [ + 54.0, + 10.0 + ], + [ + 54.2611, + 10.0171 + ], + [ + 54.5176, + 10.0681 + ], + [ + 54.7654, + 10.1522 + ], + [ + 55.0, + 10.2679 + ], + [ + 55.2175, + 10.4133 + ], + [ + 55.4142, + 10.5858 + ], + [ + 55.5867, + 10.7825 + ], + [ + 55.7321, + 11.0 + ], + [ + 55.8478, + 11.2346 + ], + [ + 55.9319, + 11.4824 + ], + [ + 55.9829, + 11.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2.0, + 18.0 + ], + [ + 1.9829, + 18.2611 + ], + [ + 1.9319, + 18.5176 + ], + [ + 1.8478, + 18.7654 + ], + [ + 1.7321, + 19.0 + ], + [ + 1.5867, + 19.2175 + ], + [ + 1.4142, + 19.4142 + ], + [ + 1.2175, + 19.5867 + ], + [ + 1.0, + 19.7321 + ], + [ + 0.7654, + 19.8478 + ], + [ + 0.5176, + 19.9319 + ], + [ + 0.2611, + 19.9829 + ], + [ + 0.0, + 20.0 + ], + [ + -0.2611, + 19.9829 + ], + [ + -0.5176, + 19.9319 + ], + [ + -0.7654, + 19.8478 + ], + [ + -1.0, + 19.7321 + ], + [ + -1.2175, + 19.5867 + ], + [ + -1.4142, + 19.4142 + ], + [ + -1.5867, + 19.2175 + ], + [ + -1.7321, + 19.0 + ], + [ + -1.8478, + 18.7654 + ], + [ + -1.9319, + 18.5176 + ], + [ + -1.9829, + 18.2611 + ], + [ + -2.0, + 18.0 + ], + [ + -1.9829, + 17.7389 + ], + [ + -1.9319, + 17.4824 + ], + [ + -1.8478, + 17.2346 + ], + [ + -1.7321, + 17.0 + ], + [ + -1.5867, + 16.7825 + ], + [ + -1.4142, + 16.5858 + ], + [ + -1.2175, + 16.4133 + ], + [ + -1.0, + 16.2679 + ], + [ + -0.7654, + 16.1522 + ], + [ + -0.5176, + 16.0681 + ], + [ + -0.2611, + 16.0171 + ], + [ + -0.0, + 16.0 + ], + [ + 0.2611, + 16.0171 + ], + [ + 0.5176, + 16.0681 + ], + [ + 0.7654, + 16.1522 + ], + [ + 1.0, + 16.2679 + ], + [ + 1.2175, + 16.4133 + ], + [ + 1.4142, + 16.5858 + ], + [ + 1.5867, + 16.7825 + ], + [ + 1.7321, + 17.0 + ], + [ + 1.8478, + 17.2346 + ], + [ + 1.9319, + 17.4824 + ], + [ + 1.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8.0, + 18.0 + ], + [ + 7.9829, + 18.2611 + ], + [ + 7.9319, + 18.5176 + ], + [ + 7.8478, + 18.7654 + ], + [ + 7.7321, + 19.0 + ], + [ + 7.5867, + 19.2175 + ], + [ + 7.4142, + 19.4142 + ], + [ + 7.2175, + 19.5867 + ], + [ + 7.0, + 19.7321 + ], + [ + 6.7654, + 19.8478 + ], + [ + 6.5176, + 19.9319 + ], + [ + 6.2611, + 19.9829 + ], + [ + 6.0, + 20.0 + ], + [ + 5.7389, + 19.9829 + ], + [ + 5.4824, + 19.9319 + ], + [ + 5.2346, + 19.8478 + ], + [ + 5.0, + 19.7321 + ], + [ + 4.7825, + 19.5867 + ], + [ + 4.5858, + 19.4142 + ], + [ + 4.4133, + 19.2175 + ], + [ + 4.2679, + 19.0 + ], + [ + 4.1522, + 18.7654 + ], + [ + 4.0681, + 18.5176 + ], + [ + 4.0171, + 18.2611 + ], + [ + 4.0, + 18.0 + ], + [ + 4.0171, + 17.7389 + ], + [ + 4.0681, + 17.4824 + ], + [ + 4.1522, + 17.2346 + ], + [ + 4.2679, + 17.0 + ], + [ + 4.4133, + 16.7825 + ], + [ + 4.5858, + 16.5858 + ], + [ + 4.7825, + 16.4133 + ], + [ + 5.0, + 16.2679 + ], + [ + 5.2346, + 16.1522 + ], + [ + 5.4824, + 16.0681 + ], + [ + 5.7389, + 16.0171 + ], + [ + 6.0, + 16.0 + ], + [ + 6.2611, + 16.0171 + ], + [ + 6.5176, + 16.0681 + ], + [ + 6.7654, + 16.1522 + ], + [ + 7.0, + 16.2679 + ], + [ + 7.2175, + 16.4133 + ], + [ + 7.4142, + 16.5858 + ], + [ + 7.5867, + 16.7825 + ], + [ + 7.7321, + 17.0 + ], + [ + 7.8478, + 17.2346 + ], + [ + 7.9319, + 17.4824 + ], + [ + 7.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.0, + 18.0 + ], + [ + 13.9829, + 18.2611 + ], + [ + 13.9319, + 18.5176 + ], + [ + 13.8478, + 18.7654 + ], + [ + 13.7321, + 19.0 + ], + [ + 13.5867, + 19.2175 + ], + [ + 13.4142, + 19.4142 + ], + [ + 13.2175, + 19.5867 + ], + [ + 13.0, + 19.7321 + ], + [ + 12.7654, + 19.8478 + ], + [ + 12.5176, + 19.9319 + ], + [ + 12.2611, + 19.9829 + ], + [ + 12.0, + 20.0 + ], + [ + 11.7389, + 19.9829 + ], + [ + 11.4824, + 19.9319 + ], + [ + 11.2346, + 19.8478 + ], + [ + 11.0, + 19.7321 + ], + [ + 10.7825, + 19.5867 + ], + [ + 10.5858, + 19.4142 + ], + [ + 10.4133, + 19.2175 + ], + [ + 10.2679, + 19.0 + ], + [ + 10.1522, + 18.7654 + ], + [ + 10.0681, + 18.5176 + ], + [ + 10.0171, + 18.2611 + ], + [ + 10.0, + 18.0 + ], + [ + 10.0171, + 17.7389 + ], + [ + 10.0681, + 17.4824 + ], + [ + 10.1522, + 17.2346 + ], + [ + 10.2679, + 17.0 + ], + [ + 10.4133, + 16.7825 + ], + [ + 10.5858, + 16.5858 + ], + [ + 10.7825, + 16.4133 + ], + [ + 11.0, + 16.2679 + ], + [ + 11.2346, + 16.1522 + ], + [ + 11.4824, + 16.0681 + ], + [ + 11.7389, + 16.0171 + ], + [ + 12.0, + 16.0 + ], + [ + 12.2611, + 16.0171 + ], + [ + 12.5176, + 16.0681 + ], + [ + 12.7654, + 16.1522 + ], + [ + 13.0, + 16.2679 + ], + [ + 13.2175, + 16.4133 + ], + [ + 13.4142, + 16.5858 + ], + [ + 13.5867, + 16.7825 + ], + [ + 13.7321, + 17.0 + ], + [ + 13.8478, + 17.2346 + ], + [ + 13.9319, + 17.4824 + ], + [ + 13.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20.0, + 18.0 + ], + [ + 19.9829, + 18.2611 + ], + [ + 19.9319, + 18.5176 + ], + [ + 19.8478, + 18.7654 + ], + [ + 19.7321, + 19.0 + ], + [ + 19.5867, + 19.2175 + ], + [ + 19.4142, + 19.4142 + ], + [ + 19.2175, + 19.5867 + ], + [ + 19.0, + 19.7321 + ], + [ + 18.7654, + 19.8478 + ], + [ + 18.5176, + 19.9319 + ], + [ + 18.2611, + 19.9829 + ], + [ + 18.0, + 20.0 + ], + [ + 17.7389, + 19.9829 + ], + [ + 17.4824, + 19.9319 + ], + [ + 17.2346, + 19.8478 + ], + [ + 17.0, + 19.7321 + ], + [ + 16.7825, + 19.5867 + ], + [ + 16.5858, + 19.4142 + ], + [ + 16.4133, + 19.2175 + ], + [ + 16.2679, + 19.0 + ], + [ + 16.1522, + 18.7654 + ], + [ + 16.0681, + 18.5176 + ], + [ + 16.0171, + 18.2611 + ], + [ + 16.0, + 18.0 + ], + [ + 16.0171, + 17.7389 + ], + [ + 16.0681, + 17.4824 + ], + [ + 16.1522, + 17.2346 + ], + [ + 16.2679, + 17.0 + ], + [ + 16.4133, + 16.7825 + ], + [ + 16.5858, + 16.5858 + ], + [ + 16.7825, + 16.4133 + ], + [ + 17.0, + 16.2679 + ], + [ + 17.2346, + 16.1522 + ], + [ + 17.4824, + 16.0681 + ], + [ + 17.7389, + 16.0171 + ], + [ + 18.0, + 16.0 + ], + [ + 18.2611, + 16.0171 + ], + [ + 18.5176, + 16.0681 + ], + [ + 18.7654, + 16.1522 + ], + [ + 19.0, + 16.2679 + ], + [ + 19.2175, + 16.4133 + ], + [ + 19.4142, + 16.5858 + ], + [ + 19.5867, + 16.7825 + ], + [ + 19.7321, + 17.0 + ], + [ + 19.8478, + 17.2346 + ], + [ + 19.9319, + 17.4824 + ], + [ + 19.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 26.0, + 18.0 + ], + [ + 25.9829, + 18.2611 + ], + [ + 25.9319, + 18.5176 + ], + [ + 25.8478, + 18.7654 + ], + [ + 25.7321, + 19.0 + ], + [ + 25.5867, + 19.2175 + ], + [ + 25.4142, + 19.4142 + ], + [ + 25.2175, + 19.5867 + ], + [ + 25.0, + 19.7321 + ], + [ + 24.7654, + 19.8478 + ], + [ + 24.5176, + 19.9319 + ], + [ + 24.2611, + 19.9829 + ], + [ + 24.0, + 20.0 + ], + [ + 23.7389, + 19.9829 + ], + [ + 23.4824, + 19.9319 + ], + [ + 23.2346, + 19.8478 + ], + [ + 23.0, + 19.7321 + ], + [ + 22.7825, + 19.5867 + ], + [ + 22.5858, + 19.4142 + ], + [ + 22.4133, + 19.2175 + ], + [ + 22.2679, + 19.0 + ], + [ + 22.1522, + 18.7654 + ], + [ + 22.0681, + 18.5176 + ], + [ + 22.0171, + 18.2611 + ], + [ + 22.0, + 18.0 + ], + [ + 22.0171, + 17.7389 + ], + [ + 22.0681, + 17.4824 + ], + [ + 22.1522, + 17.2346 + ], + [ + 22.2679, + 17.0 + ], + [ + 22.4133, + 16.7825 + ], + [ + 22.5858, + 16.5858 + ], + [ + 22.7825, + 16.4133 + ], + [ + 23.0, + 16.2679 + ], + [ + 23.2346, + 16.1522 + ], + [ + 23.4824, + 16.0681 + ], + [ + 23.7389, + 16.0171 + ], + [ + 24.0, + 16.0 + ], + [ + 24.2611, + 16.0171 + ], + [ + 24.5176, + 16.0681 + ], + [ + 24.7654, + 16.1522 + ], + [ + 25.0, + 16.2679 + ], + [ + 25.2175, + 16.4133 + ], + [ + 25.4142, + 16.5858 + ], + [ + 25.5867, + 16.7825 + ], + [ + 25.7321, + 17.0 + ], + [ + 25.8478, + 17.2346 + ], + [ + 25.9319, + 17.4824 + ], + [ + 25.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 32.0, + 18.0 + ], + [ + 31.9829, + 18.2611 + ], + [ + 31.9319, + 18.5176 + ], + [ + 31.8478, + 18.7654 + ], + [ + 31.7321, + 19.0 + ], + [ + 31.5867, + 19.2175 + ], + [ + 31.4142, + 19.4142 + ], + [ + 31.2175, + 19.5867 + ], + [ + 31.0, + 19.7321 + ], + [ + 30.7654, + 19.8478 + ], + [ + 30.5176, + 19.9319 + ], + [ + 30.2611, + 19.9829 + ], + [ + 30.0, + 20.0 + ], + [ + 29.7389, + 19.9829 + ], + [ + 29.4824, + 19.9319 + ], + [ + 29.2346, + 19.8478 + ], + [ + 29.0, + 19.7321 + ], + [ + 28.7825, + 19.5867 + ], + [ + 28.5858, + 19.4142 + ], + [ + 28.4133, + 19.2175 + ], + [ + 28.2679, + 19.0 + ], + [ + 28.1522, + 18.7654 + ], + [ + 28.0681, + 18.5176 + ], + [ + 28.0171, + 18.2611 + ], + [ + 28.0, + 18.0 + ], + [ + 28.0171, + 17.7389 + ], + [ + 28.0681, + 17.4824 + ], + [ + 28.1522, + 17.2346 + ], + [ + 28.2679, + 17.0 + ], + [ + 28.4133, + 16.7825 + ], + [ + 28.5858, + 16.5858 + ], + [ + 28.7825, + 16.4133 + ], + [ + 29.0, + 16.2679 + ], + [ + 29.2346, + 16.1522 + ], + [ + 29.4824, + 16.0681 + ], + [ + 29.7389, + 16.0171 + ], + [ + 30.0, + 16.0 + ], + [ + 30.2611, + 16.0171 + ], + [ + 30.5176, + 16.0681 + ], + [ + 30.7654, + 16.1522 + ], + [ + 31.0, + 16.2679 + ], + [ + 31.2175, + 16.4133 + ], + [ + 31.4142, + 16.5858 + ], + [ + 31.5867, + 16.7825 + ], + [ + 31.7321, + 17.0 + ], + [ + 31.8478, + 17.2346 + ], + [ + 31.9319, + 17.4824 + ], + [ + 31.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 38.0, + 18.0 + ], + [ + 37.9829, + 18.2611 + ], + [ + 37.9319, + 18.5176 + ], + [ + 37.8478, + 18.7654 + ], + [ + 37.7321, + 19.0 + ], + [ + 37.5867, + 19.2175 + ], + [ + 37.4142, + 19.4142 + ], + [ + 37.2175, + 19.5867 + ], + [ + 37.0, + 19.7321 + ], + [ + 36.7654, + 19.8478 + ], + [ + 36.5176, + 19.9319 + ], + [ + 36.2611, + 19.9829 + ], + [ + 36.0, + 20.0 + ], + [ + 35.7389, + 19.9829 + ], + [ + 35.4824, + 19.9319 + ], + [ + 35.2346, + 19.8478 + ], + [ + 35.0, + 19.7321 + ], + [ + 34.7825, + 19.5867 + ], + [ + 34.5858, + 19.4142 + ], + [ + 34.4133, + 19.2175 + ], + [ + 34.2679, + 19.0 + ], + [ + 34.1522, + 18.7654 + ], + [ + 34.0681, + 18.5176 + ], + [ + 34.0171, + 18.2611 + ], + [ + 34.0, + 18.0 + ], + [ + 34.0171, + 17.7389 + ], + [ + 34.0681, + 17.4824 + ], + [ + 34.1522, + 17.2346 + ], + [ + 34.2679, + 17.0 + ], + [ + 34.4133, + 16.7825 + ], + [ + 34.5858, + 16.5858 + ], + [ + 34.7825, + 16.4133 + ], + [ + 35.0, + 16.2679 + ], + [ + 35.2346, + 16.1522 + ], + [ + 35.4824, + 16.0681 + ], + [ + 35.7389, + 16.0171 + ], + [ + 36.0, + 16.0 + ], + [ + 36.2611, + 16.0171 + ], + [ + 36.5176, + 16.0681 + ], + [ + 36.7654, + 16.1522 + ], + [ + 37.0, + 16.2679 + ], + [ + 37.2175, + 16.4133 + ], + [ + 37.4142, + 16.5858 + ], + [ + 37.5867, + 16.7825 + ], + [ + 37.7321, + 17.0 + ], + [ + 37.8478, + 17.2346 + ], + [ + 37.9319, + 17.4824 + ], + [ + 37.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 44.0, + 18.0 + ], + [ + 43.9829, + 18.2611 + ], + [ + 43.9319, + 18.5176 + ], + [ + 43.8478, + 18.7654 + ], + [ + 43.7321, + 19.0 + ], + [ + 43.5867, + 19.2175 + ], + [ + 43.4142, + 19.4142 + ], + [ + 43.2175, + 19.5867 + ], + [ + 43.0, + 19.7321 + ], + [ + 42.7654, + 19.8478 + ], + [ + 42.5176, + 19.9319 + ], + [ + 42.2611, + 19.9829 + ], + [ + 42.0, + 20.0 + ], + [ + 41.7389, + 19.9829 + ], + [ + 41.4824, + 19.9319 + ], + [ + 41.2346, + 19.8478 + ], + [ + 41.0, + 19.7321 + ], + [ + 40.7825, + 19.5867 + ], + [ + 40.5858, + 19.4142 + ], + [ + 40.4133, + 19.2175 + ], + [ + 40.2679, + 19.0 + ], + [ + 40.1522, + 18.7654 + ], + [ + 40.0681, + 18.5176 + ], + [ + 40.0171, + 18.2611 + ], + [ + 40.0, + 18.0 + ], + [ + 40.0171, + 17.7389 + ], + [ + 40.0681, + 17.4824 + ], + [ + 40.1522, + 17.2346 + ], + [ + 40.2679, + 17.0 + ], + [ + 40.4133, + 16.7825 + ], + [ + 40.5858, + 16.5858 + ], + [ + 40.7825, + 16.4133 + ], + [ + 41.0, + 16.2679 + ], + [ + 41.2346, + 16.1522 + ], + [ + 41.4824, + 16.0681 + ], + [ + 41.7389, + 16.0171 + ], + [ + 42.0, + 16.0 + ], + [ + 42.2611, + 16.0171 + ], + [ + 42.5176, + 16.0681 + ], + [ + 42.7654, + 16.1522 + ], + [ + 43.0, + 16.2679 + ], + [ + 43.2175, + 16.4133 + ], + [ + 43.4142, + 16.5858 + ], + [ + 43.5867, + 16.7825 + ], + [ + 43.7321, + 17.0 + ], + [ + 43.8478, + 17.2346 + ], + [ + 43.9319, + 17.4824 + ], + [ + 43.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 50.0, + 18.0 + ], + [ + 49.9829, + 18.2611 + ], + [ + 49.9319, + 18.5176 + ], + [ + 49.8478, + 18.7654 + ], + [ + 49.7321, + 19.0 + ], + [ + 49.5867, + 19.2175 + ], + [ + 49.4142, + 19.4142 + ], + [ + 49.2175, + 19.5867 + ], + [ + 49.0, + 19.7321 + ], + [ + 48.7654, + 19.8478 + ], + [ + 48.5176, + 19.9319 + ], + [ + 48.2611, + 19.9829 + ], + [ + 48.0, + 20.0 + ], + [ + 47.7389, + 19.9829 + ], + [ + 47.4824, + 19.9319 + ], + [ + 47.2346, + 19.8478 + ], + [ + 47.0, + 19.7321 + ], + [ + 46.7825, + 19.5867 + ], + [ + 46.5858, + 19.4142 + ], + [ + 46.4133, + 19.2175 + ], + [ + 46.2679, + 19.0 + ], + [ + 46.1522, + 18.7654 + ], + [ + 46.0681, + 18.5176 + ], + [ + 46.0171, + 18.2611 + ], + [ + 46.0, + 18.0 + ], + [ + 46.0171, + 17.7389 + ], + [ + 46.0681, + 17.4824 + ], + [ + 46.1522, + 17.2346 + ], + [ + 46.2679, + 17.0 + ], + [ + 46.4133, + 16.7825 + ], + [ + 46.5858, + 16.5858 + ], + [ + 46.7825, + 16.4133 + ], + [ + 47.0, + 16.2679 + ], + [ + 47.2346, + 16.1522 + ], + [ + 47.4824, + 16.0681 + ], + [ + 47.7389, + 16.0171 + ], + [ + 48.0, + 16.0 + ], + [ + 48.2611, + 16.0171 + ], + [ + 48.5176, + 16.0681 + ], + [ + 48.7654, + 16.1522 + ], + [ + 49.0, + 16.2679 + ], + [ + 49.2175, + 16.4133 + ], + [ + 49.4142, + 16.5858 + ], + [ + 49.5867, + 16.7825 + ], + [ + 49.7321, + 17.0 + ], + [ + 49.8478, + 17.2346 + ], + [ + 49.9319, + 17.4824 + ], + [ + 49.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 56.0, + 18.0 + ], + [ + 55.9829, + 18.2611 + ], + [ + 55.9319, + 18.5176 + ], + [ + 55.8478, + 18.7654 + ], + [ + 55.7321, + 19.0 + ], + [ + 55.5867, + 19.2175 + ], + [ + 55.4142, + 19.4142 + ], + [ + 55.2175, + 19.5867 + ], + [ + 55.0, + 19.7321 + ], + [ + 54.7654, + 19.8478 + ], + [ + 54.5176, + 19.9319 + ], + [ + 54.2611, + 19.9829 + ], + [ + 54.0, + 20.0 + ], + [ + 53.7389, + 19.9829 + ], + [ + 53.4824, + 19.9319 + ], + [ + 53.2346, + 19.8478 + ], + [ + 53.0, + 19.7321 + ], + [ + 52.7825, + 19.5867 + ], + [ + 52.5858, + 19.4142 + ], + [ + 52.4133, + 19.2175 + ], + [ + 52.2679, + 19.0 + ], + [ + 52.1522, + 18.7654 + ], + [ + 52.0681, + 18.5176 + ], + [ + 52.0171, + 18.2611 + ], + [ + 52.0, + 18.0 + ], + [ + 52.0171, + 17.7389 + ], + [ + 52.0681, + 17.4824 + ], + [ + 52.1522, + 17.2346 + ], + [ + 52.2679, + 17.0 + ], + [ + 52.4133, + 16.7825 + ], + [ + 52.5858, + 16.5858 + ], + [ + 52.7825, + 16.4133 + ], + [ + 53.0, + 16.2679 + ], + [ + 53.2346, + 16.1522 + ], + [ + 53.4824, + 16.0681 + ], + [ + 53.7389, + 16.0171 + ], + [ + 54.0, + 16.0 + ], + [ + 54.2611, + 16.0171 + ], + [ + 54.5176, + 16.0681 + ], + [ + 54.7654, + 16.1522 + ], + [ + 55.0, + 16.2679 + ], + [ + 55.2175, + 16.4133 + ], + [ + 55.4142, + 16.5858 + ], + [ + 55.5867, + 16.7825 + ], + [ + 55.7321, + 17.0 + ], + [ + 55.8478, + 17.2346 + ], + [ + 55.9319, + 17.4824 + ], + [ + 55.9829, + 17.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2.0, + 24.0 + ], + [ + 1.9829, + 24.2611 + ], + [ + 1.9319, + 24.5176 + ], + [ + 1.8478, + 24.7654 + ], + [ + 1.7321, + 25.0 + ], + [ + 1.5867, + 25.2175 + ], + [ + 1.4142, + 25.4142 + ], + [ + 1.2175, + 25.5867 + ], + [ + 1.0, + 25.7321 + ], + [ + 0.7654, + 25.8478 + ], + [ + 0.5176, + 25.9319 + ], + [ + 0.2611, + 25.9829 + ], + [ + 0.0, + 26.0 + ], + [ + -0.2611, + 25.9829 + ], + [ + -0.5176, + 25.9319 + ], + [ + -0.7654, + 25.8478 + ], + [ + -1.0, + 25.7321 + ], + [ + -1.2175, + 25.5867 + ], + [ + -1.4142, + 25.4142 + ], + [ + -1.5867, + 25.2175 + ], + [ + -1.7321, + 25.0 + ], + [ + -1.8478, + 24.7654 + ], + [ + -1.9319, + 24.5176 + ], + [ + -1.9829, + 24.2611 + ], + [ + -2.0, + 24.0 + ], + [ + -1.9829, + 23.7389 + ], + [ + -1.9319, + 23.4824 + ], + [ + -1.8478, + 23.2346 + ], + [ + -1.7321, + 23.0 + ], + [ + -1.5867, + 22.7825 + ], + [ + -1.4142, + 22.5858 + ], + [ + -1.2175, + 22.4133 + ], + [ + -1.0, + 22.2679 + ], + [ + -0.7654, + 22.1522 + ], + [ + -0.5176, + 22.0681 + ], + [ + -0.2611, + 22.0171 + ], + [ + -0.0, + 22.0 + ], + [ + 0.2611, + 22.0171 + ], + [ + 0.5176, + 22.0681 + ], + [ + 0.7654, + 22.1522 + ], + [ + 1.0, + 22.2679 + ], + [ + 1.2175, + 22.4133 + ], + [ + 1.4142, + 22.5858 + ], + [ + 1.5867, + 22.7825 + ], + [ + 1.7321, + 23.0 + ], + [ + 1.8478, + 23.2346 + ], + [ + 1.9319, + 23.4824 + ], + [ + 1.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8.0, + 24.0 + ], + [ + 7.9829, + 24.2611 + ], + [ + 7.9319, + 24.5176 + ], + [ + 7.8478, + 24.7654 + ], + [ + 7.7321, + 25.0 + ], + [ + 7.5867, + 25.2175 + ], + [ + 7.4142, + 25.4142 + ], + [ + 7.2175, + 25.5867 + ], + [ + 7.0, + 25.7321 + ], + [ + 6.7654, + 25.8478 + ], + [ + 6.5176, + 25.9319 + ], + [ + 6.2611, + 25.9829 + ], + [ + 6.0, + 26.0 + ], + [ + 5.7389, + 25.9829 + ], + [ + 5.4824, + 25.9319 + ], + [ + 5.2346, + 25.8478 + ], + [ + 5.0, + 25.7321 + ], + [ + 4.7825, + 25.5867 + ], + [ + 4.5858, + 25.4142 + ], + [ + 4.4133, + 25.2175 + ], + [ + 4.2679, + 25.0 + ], + [ + 4.1522, + 24.7654 + ], + [ + 4.0681, + 24.5176 + ], + [ + 4.0171, + 24.2611 + ], + [ + 4.0, + 24.0 + ], + [ + 4.0171, + 23.7389 + ], + [ + 4.0681, + 23.4824 + ], + [ + 4.1522, + 23.2346 + ], + [ + 4.2679, + 23.0 + ], + [ + 4.4133, + 22.7825 + ], + [ + 4.5858, + 22.5858 + ], + [ + 4.7825, + 22.4133 + ], + [ + 5.0, + 22.2679 + ], + [ + 5.2346, + 22.1522 + ], + [ + 5.4824, + 22.0681 + ], + [ + 5.7389, + 22.0171 + ], + [ + 6.0, + 22.0 + ], + [ + 6.2611, + 22.0171 + ], + [ + 6.5176, + 22.0681 + ], + [ + 6.7654, + 22.1522 + ], + [ + 7.0, + 22.2679 + ], + [ + 7.2175, + 22.4133 + ], + [ + 7.4142, + 22.5858 + ], + [ + 7.5867, + 22.7825 + ], + [ + 7.7321, + 23.0 + ], + [ + 7.8478, + 23.2346 + ], + [ + 7.9319, + 23.4824 + ], + [ + 7.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.0, + 24.0 + ], + [ + 13.9829, + 24.2611 + ], + [ + 13.9319, + 24.5176 + ], + [ + 13.8478, + 24.7654 + ], + [ + 13.7321, + 25.0 + ], + [ + 13.5867, + 25.2175 + ], + [ + 13.4142, + 25.4142 + ], + [ + 13.2175, + 25.5867 + ], + [ + 13.0, + 25.7321 + ], + [ + 12.7654, + 25.8478 + ], + [ + 12.5176, + 25.9319 + ], + [ + 12.2611, + 25.9829 + ], + [ + 12.0, + 26.0 + ], + [ + 11.7389, + 25.9829 + ], + [ + 11.4824, + 25.9319 + ], + [ + 11.2346, + 25.8478 + ], + [ + 11.0, + 25.7321 + ], + [ + 10.7825, + 25.5867 + ], + [ + 10.5858, + 25.4142 + ], + [ + 10.4133, + 25.2175 + ], + [ + 10.2679, + 25.0 + ], + [ + 10.1522, + 24.7654 + ], + [ + 10.0681, + 24.5176 + ], + [ + 10.0171, + 24.2611 + ], + [ + 10.0, + 24.0 + ], + [ + 10.0171, + 23.7389 + ], + [ + 10.0681, + 23.4824 + ], + [ + 10.1522, + 23.2346 + ], + [ + 10.2679, + 23.0 + ], + [ + 10.4133, + 22.7825 + ], + [ + 10.5858, + 22.5858 + ], + [ + 10.7825, + 22.4133 + ], + [ + 11.0, + 22.2679 + ], + [ + 11.2346, + 22.1522 + ], + [ + 11.4824, + 22.0681 + ], + [ + 11.7389, + 22.0171 + ], + [ + 12.0, + 22.0 + ], + [ + 12.2611, + 22.0171 + ], + [ + 12.5176, + 22.0681 + ], + [ + 12.7654, + 22.1522 + ], + [ + 13.0, + 22.2679 + ], + [ + 13.2175, + 22.4133 + ], + [ + 13.4142, + 22.5858 + ], + [ + 13.5867, + 22.7825 + ], + [ + 13.7321, + 23.0 + ], + [ + 13.8478, + 23.2346 + ], + [ + 13.9319, + 23.4824 + ], + [ + 13.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20.0, + 24.0 + ], + [ + 19.9829, + 24.2611 + ], + [ + 19.9319, + 24.5176 + ], + [ + 19.8478, + 24.7654 + ], + [ + 19.7321, + 25.0 + ], + [ + 19.5867, + 25.2175 + ], + [ + 19.4142, + 25.4142 + ], + [ + 19.2175, + 25.5867 + ], + [ + 19.0, + 25.7321 + ], + [ + 18.7654, + 25.8478 + ], + [ + 18.5176, + 25.9319 + ], + [ + 18.2611, + 25.9829 + ], + [ + 18.0, + 26.0 + ], + [ + 17.7389, + 25.9829 + ], + [ + 17.4824, + 25.9319 + ], + [ + 17.2346, + 25.8478 + ], + [ + 17.0, + 25.7321 + ], + [ + 16.7825, + 25.5867 + ], + [ + 16.5858, + 25.4142 + ], + [ + 16.4133, + 25.2175 + ], + [ + 16.2679, + 25.0 + ], + [ + 16.1522, + 24.7654 + ], + [ + 16.0681, + 24.5176 + ], + [ + 16.0171, + 24.2611 + ], + [ + 16.0, + 24.0 + ], + [ + 16.0171, + 23.7389 + ], + [ + 16.0681, + 23.4824 + ], + [ + 16.1522, + 23.2346 + ], + [ + 16.2679, + 23.0 + ], + [ + 16.4133, + 22.7825 + ], + [ + 16.5858, + 22.5858 + ], + [ + 16.7825, + 22.4133 + ], + [ + 17.0, + 22.2679 + ], + [ + 17.2346, + 22.1522 + ], + [ + 17.4824, + 22.0681 + ], + [ + 17.7389, + 22.0171 + ], + [ + 18.0, + 22.0 + ], + [ + 18.2611, + 22.0171 + ], + [ + 18.5176, + 22.0681 + ], + [ + 18.7654, + 22.1522 + ], + [ + 19.0, + 22.2679 + ], + [ + 19.2175, + 22.4133 + ], + [ + 19.4142, + 22.5858 + ], + [ + 19.5867, + 22.7825 + ], + [ + 19.7321, + 23.0 + ], + [ + 19.8478, + 23.2346 + ], + [ + 19.9319, + 23.4824 + ], + [ + 19.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 26.0, + 24.0 + ], + [ + 25.9829, + 24.2611 + ], + [ + 25.9319, + 24.5176 + ], + [ + 25.8478, + 24.7654 + ], + [ + 25.7321, + 25.0 + ], + [ + 25.5867, + 25.2175 + ], + [ + 25.4142, + 25.4142 + ], + [ + 25.2175, + 25.5867 + ], + [ + 25.0, + 25.7321 + ], + [ + 24.7654, + 25.8478 + ], + [ + 24.5176, + 25.9319 + ], + [ + 24.2611, + 25.9829 + ], + [ + 24.0, + 26.0 + ], + [ + 23.7389, + 25.9829 + ], + [ + 23.4824, + 25.9319 + ], + [ + 23.2346, + 25.8478 + ], + [ + 23.0, + 25.7321 + ], + [ + 22.7825, + 25.5867 + ], + [ + 22.5858, + 25.4142 + ], + [ + 22.4133, + 25.2175 + ], + [ + 22.2679, + 25.0 + ], + [ + 22.1522, + 24.7654 + ], + [ + 22.0681, + 24.5176 + ], + [ + 22.0171, + 24.2611 + ], + [ + 22.0, + 24.0 + ], + [ + 22.0171, + 23.7389 + ], + [ + 22.0681, + 23.4824 + ], + [ + 22.1522, + 23.2346 + ], + [ + 22.2679, + 23.0 + ], + [ + 22.4133, + 22.7825 + ], + [ + 22.5858, + 22.5858 + ], + [ + 22.7825, + 22.4133 + ], + [ + 23.0, + 22.2679 + ], + [ + 23.2346, + 22.1522 + ], + [ + 23.4824, + 22.0681 + ], + [ + 23.7389, + 22.0171 + ], + [ + 24.0, + 22.0 + ], + [ + 24.2611, + 22.0171 + ], + [ + 24.5176, + 22.0681 + ], + [ + 24.7654, + 22.1522 + ], + [ + 25.0, + 22.2679 + ], + [ + 25.2175, + 22.4133 + ], + [ + 25.4142, + 22.5858 + ], + [ + 25.5867, + 22.7825 + ], + [ + 25.7321, + 23.0 + ], + [ + 25.8478, + 23.2346 + ], + [ + 25.9319, + 23.4824 + ], + [ + 25.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 32.0, + 24.0 + ], + [ + 31.9829, + 24.2611 + ], + [ + 31.9319, + 24.5176 + ], + [ + 31.8478, + 24.7654 + ], + [ + 31.7321, + 25.0 + ], + [ + 31.5867, + 25.2175 + ], + [ + 31.4142, + 25.4142 + ], + [ + 31.2175, + 25.5867 + ], + [ + 31.0, + 25.7321 + ], + [ + 30.7654, + 25.8478 + ], + [ + 30.5176, + 25.9319 + ], + [ + 30.2611, + 25.9829 + ], + [ + 30.0, + 26.0 + ], + [ + 29.7389, + 25.9829 + ], + [ + 29.4824, + 25.9319 + ], + [ + 29.2346, + 25.8478 + ], + [ + 29.0, + 25.7321 + ], + [ + 28.7825, + 25.5867 + ], + [ + 28.5858, + 25.4142 + ], + [ + 28.4133, + 25.2175 + ], + [ + 28.2679, + 25.0 + ], + [ + 28.1522, + 24.7654 + ], + [ + 28.0681, + 24.5176 + ], + [ + 28.0171, + 24.2611 + ], + [ + 28.0, + 24.0 + ], + [ + 28.0171, + 23.7389 + ], + [ + 28.0681, + 23.4824 + ], + [ + 28.1522, + 23.2346 + ], + [ + 28.2679, + 23.0 + ], + [ + 28.4133, + 22.7825 + ], + [ + 28.5858, + 22.5858 + ], + [ + 28.7825, + 22.4133 + ], + [ + 29.0, + 22.2679 + ], + [ + 29.2346, + 22.1522 + ], + [ + 29.4824, + 22.0681 + ], + [ + 29.7389, + 22.0171 + ], + [ + 30.0, + 22.0 + ], + [ + 30.2611, + 22.0171 + ], + [ + 30.5176, + 22.0681 + ], + [ + 30.7654, + 22.1522 + ], + [ + 31.0, + 22.2679 + ], + [ + 31.2175, + 22.4133 + ], + [ + 31.4142, + 22.5858 + ], + [ + 31.5867, + 22.7825 + ], + [ + 31.7321, + 23.0 + ], + [ + 31.8478, + 23.2346 + ], + [ + 31.9319, + 23.4824 + ], + [ + 31.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 38.0, + 24.0 + ], + [ + 37.9829, + 24.2611 + ], + [ + 37.9319, + 24.5176 + ], + [ + 37.8478, + 24.7654 + ], + [ + 37.7321, + 25.0 + ], + [ + 37.5867, + 25.2175 + ], + [ + 37.4142, + 25.4142 + ], + [ + 37.2175, + 25.5867 + ], + [ + 37.0, + 25.7321 + ], + [ + 36.7654, + 25.8478 + ], + [ + 36.5176, + 25.9319 + ], + [ + 36.2611, + 25.9829 + ], + [ + 36.0, + 26.0 + ], + [ + 35.7389, + 25.9829 + ], + [ + 35.4824, + 25.9319 + ], + [ + 35.2346, + 25.8478 + ], + [ + 35.0, + 25.7321 + ], + [ + 34.7825, + 25.5867 + ], + [ + 34.5858, + 25.4142 + ], + [ + 34.4133, + 25.2175 + ], + [ + 34.2679, + 25.0 + ], + [ + 34.1522, + 24.7654 + ], + [ + 34.0681, + 24.5176 + ], + [ + 34.0171, + 24.2611 + ], + [ + 34.0, + 24.0 + ], + [ + 34.0171, + 23.7389 + ], + [ + 34.0681, + 23.4824 + ], + [ + 34.1522, + 23.2346 + ], + [ + 34.2679, + 23.0 + ], + [ + 34.4133, + 22.7825 + ], + [ + 34.5858, + 22.5858 + ], + [ + 34.7825, + 22.4133 + ], + [ + 35.0, + 22.2679 + ], + [ + 35.2346, + 22.1522 + ], + [ + 35.4824, + 22.0681 + ], + [ + 35.7389, + 22.0171 + ], + [ + 36.0, + 22.0 + ], + [ + 36.2611, + 22.0171 + ], + [ + 36.5176, + 22.0681 + ], + [ + 36.7654, + 22.1522 + ], + [ + 37.0, + 22.2679 + ], + [ + 37.2175, + 22.4133 + ], + [ + 37.4142, + 22.5858 + ], + [ + 37.5867, + 22.7825 + ], + [ + 37.7321, + 23.0 + ], + [ + 37.8478, + 23.2346 + ], + [ + 37.9319, + 23.4824 + ], + [ + 37.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 44.0, + 24.0 + ], + [ + 43.9829, + 24.2611 + ], + [ + 43.9319, + 24.5176 + ], + [ + 43.8478, + 24.7654 + ], + [ + 43.7321, + 25.0 + ], + [ + 43.5867, + 25.2175 + ], + [ + 43.4142, + 25.4142 + ], + [ + 43.2175, + 25.5867 + ], + [ + 43.0, + 25.7321 + ], + [ + 42.7654, + 25.8478 + ], + [ + 42.5176, + 25.9319 + ], + [ + 42.2611, + 25.9829 + ], + [ + 42.0, + 26.0 + ], + [ + 41.7389, + 25.9829 + ], + [ + 41.4824, + 25.9319 + ], + [ + 41.2346, + 25.8478 + ], + [ + 41.0, + 25.7321 + ], + [ + 40.7825, + 25.5867 + ], + [ + 40.5858, + 25.4142 + ], + [ + 40.4133, + 25.2175 + ], + [ + 40.2679, + 25.0 + ], + [ + 40.1522, + 24.7654 + ], + [ + 40.0681, + 24.5176 + ], + [ + 40.0171, + 24.2611 + ], + [ + 40.0, + 24.0 + ], + [ + 40.0171, + 23.7389 + ], + [ + 40.0681, + 23.4824 + ], + [ + 40.1522, + 23.2346 + ], + [ + 40.2679, + 23.0 + ], + [ + 40.4133, + 22.7825 + ], + [ + 40.5858, + 22.5858 + ], + [ + 40.7825, + 22.4133 + ], + [ + 41.0, + 22.2679 + ], + [ + 41.2346, + 22.1522 + ], + [ + 41.4824, + 22.0681 + ], + [ + 41.7389, + 22.0171 + ], + [ + 42.0, + 22.0 + ], + [ + 42.2611, + 22.0171 + ], + [ + 42.5176, + 22.0681 + ], + [ + 42.7654, + 22.1522 + ], + [ + 43.0, + 22.2679 + ], + [ + 43.2175, + 22.4133 + ], + [ + 43.4142, + 22.5858 + ], + [ + 43.5867, + 22.7825 + ], + [ + 43.7321, + 23.0 + ], + [ + 43.8478, + 23.2346 + ], + [ + 43.9319, + 23.4824 + ], + [ + 43.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 50.0, + 24.0 + ], + [ + 49.9829, + 24.2611 + ], + [ + 49.9319, + 24.5176 + ], + [ + 49.8478, + 24.7654 + ], + [ + 49.7321, + 25.0 + ], + [ + 49.5867, + 25.2175 + ], + [ + 49.4142, + 25.4142 + ], + [ + 49.2175, + 25.5867 + ], + [ + 49.0, + 25.7321 + ], + [ + 48.7654, + 25.8478 + ], + [ + 48.5176, + 25.9319 + ], + [ + 48.2611, + 25.9829 + ], + [ + 48.0, + 26.0 + ], + [ + 47.7389, + 25.9829 + ], + [ + 47.4824, + 25.9319 + ], + [ + 47.2346, + 25.8478 + ], + [ + 47.0, + 25.7321 + ], + [ + 46.7825, + 25.5867 + ], + [ + 46.5858, + 25.4142 + ], + [ + 46.4133, + 25.2175 + ], + [ + 46.2679, + 25.0 + ], + [ + 46.1522, + 24.7654 + ], + [ + 46.0681, + 24.5176 + ], + [ + 46.0171, + 24.2611 + ], + [ + 46.0, + 24.0 + ], + [ + 46.0171, + 23.7389 + ], + [ + 46.0681, + 23.4824 + ], + [ + 46.1522, + 23.2346 + ], + [ + 46.2679, + 23.0 + ], + [ + 46.4133, + 22.7825 + ], + [ + 46.5858, + 22.5858 + ], + [ + 46.7825, + 22.4133 + ], + [ + 47.0, + 22.2679 + ], + [ + 47.2346, + 22.1522 + ], + [ + 47.4824, + 22.0681 + ], + [ + 47.7389, + 22.0171 + ], + [ + 48.0, + 22.0 + ], + [ + 48.2611, + 22.0171 + ], + [ + 48.5176, + 22.0681 + ], + [ + 48.7654, + 22.1522 + ], + [ + 49.0, + 22.2679 + ], + [ + 49.2175, + 22.4133 + ], + [ + 49.4142, + 22.5858 + ], + [ + 49.5867, + 22.7825 + ], + [ + 49.7321, + 23.0 + ], + [ + 49.8478, + 23.2346 + ], + [ + 49.9319, + 23.4824 + ], + [ + 49.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 56.0, + 24.0 + ], + [ + 55.9829, + 24.2611 + ], + [ + 55.9319, + 24.5176 + ], + [ + 55.8478, + 24.7654 + ], + [ + 55.7321, + 25.0 + ], + [ + 55.5867, + 25.2175 + ], + [ + 55.4142, + 25.4142 + ], + [ + 55.2175, + 25.5867 + ], + [ + 55.0, + 25.7321 + ], + [ + 54.7654, + 25.8478 + ], + [ + 54.5176, + 25.9319 + ], + [ + 54.2611, + 25.9829 + ], + [ + 54.0, + 26.0 + ], + [ + 53.7389, + 25.9829 + ], + [ + 53.4824, + 25.9319 + ], + [ + 53.2346, + 25.8478 + ], + [ + 53.0, + 25.7321 + ], + [ + 52.7825, + 25.5867 + ], + [ + 52.5858, + 25.4142 + ], + [ + 52.4133, + 25.2175 + ], + [ + 52.2679, + 25.0 + ], + [ + 52.1522, + 24.7654 + ], + [ + 52.0681, + 24.5176 + ], + [ + 52.0171, + 24.2611 + ], + [ + 52.0, + 24.0 + ], + [ + 52.0171, + 23.7389 + ], + [ + 52.0681, + 23.4824 + ], + [ + 52.1522, + 23.2346 + ], + [ + 52.2679, + 23.0 + ], + [ + 52.4133, + 22.7825 + ], + [ + 52.5858, + 22.5858 + ], + [ + 52.7825, + 22.4133 + ], + [ + 53.0, + 22.2679 + ], + [ + 53.2346, + 22.1522 + ], + [ + 53.4824, + 22.0681 + ], + [ + 53.7389, + 22.0171 + ], + [ + 54.0, + 22.0 + ], + [ + 54.2611, + 22.0171 + ], + [ + 54.5176, + 22.0681 + ], + [ + 54.7654, + 22.1522 + ], + [ + 55.0, + 22.2679 + ], + [ + 55.2175, + 22.4133 + ], + [ + 55.4142, + 22.5858 + ], + [ + 55.5867, + 22.7825 + ], + [ + 55.7321, + 23.0 + ], + [ + 55.8478, + 23.2346 + ], + [ + 55.9319, + 23.4824 + ], + [ + 55.9829, + 23.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2.0, + 30.0 + ], + [ + 1.9829, + 30.2611 + ], + [ + 1.9319, + 30.5176 + ], + [ + 1.8478, + 30.7654 + ], + [ + 1.7321, + 31.0 + ], + [ + 1.5867, + 31.2175 + ], + [ + 1.4142, + 31.4142 + ], + [ + 1.2175, + 31.5867 + ], + [ + 1.0, + 31.7321 + ], + [ + 0.7654, + 31.8478 + ], + [ + 0.5176, + 31.9319 + ], + [ + 0.2611, + 31.9829 + ], + [ + 0.0, + 32.0 + ], + [ + -0.2611, + 31.9829 + ], + [ + -0.5176, + 31.9319 + ], + [ + -0.7654, + 31.8478 + ], + [ + -1.0, + 31.7321 + ], + [ + -1.2175, + 31.5867 + ], + [ + -1.4142, + 31.4142 + ], + [ + -1.5867, + 31.2175 + ], + [ + -1.7321, + 31.0 + ], + [ + -1.8478, + 30.7654 + ], + [ + -1.9319, + 30.5176 + ], + [ + -1.9829, + 30.2611 + ], + [ + -2.0, + 30.0 + ], + [ + -1.9829, + 29.7389 + ], + [ + -1.9319, + 29.4824 + ], + [ + -1.8478, + 29.2346 + ], + [ + -1.7321, + 29.0 + ], + [ + -1.5867, + 28.7825 + ], + [ + -1.4142, + 28.5858 + ], + [ + -1.2175, + 28.4133 + ], + [ + -1.0, + 28.2679 + ], + [ + -0.7654, + 28.1522 + ], + [ + -0.5176, + 28.0681 + ], + [ + -0.2611, + 28.0171 + ], + [ + -0.0, + 28.0 + ], + [ + 0.2611, + 28.0171 + ], + [ + 0.5176, + 28.0681 + ], + [ + 0.7654, + 28.1522 + ], + [ + 1.0, + 28.2679 + ], + [ + 1.2175, + 28.4133 + ], + [ + 1.4142, + 28.5858 + ], + [ + 1.5867, + 28.7825 + ], + [ + 1.7321, + 29.0 + ], + [ + 1.8478, + 29.2346 + ], + [ + 1.9319, + 29.4824 + ], + [ + 1.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8.0, + 30.0 + ], + [ + 7.9829, + 30.2611 + ], + [ + 7.9319, + 30.5176 + ], + [ + 7.8478, + 30.7654 + ], + [ + 7.7321, + 31.0 + ], + [ + 7.5867, + 31.2175 + ], + [ + 7.4142, + 31.4142 + ], + [ + 7.2175, + 31.5867 + ], + [ + 7.0, + 31.7321 + ], + [ + 6.7654, + 31.8478 + ], + [ + 6.5176, + 31.9319 + ], + [ + 6.2611, + 31.9829 + ], + [ + 6.0, + 32.0 + ], + [ + 5.7389, + 31.9829 + ], + [ + 5.4824, + 31.9319 + ], + [ + 5.2346, + 31.8478 + ], + [ + 5.0, + 31.7321 + ], + [ + 4.7825, + 31.5867 + ], + [ + 4.5858, + 31.4142 + ], + [ + 4.4133, + 31.2175 + ], + [ + 4.2679, + 31.0 + ], + [ + 4.1522, + 30.7654 + ], + [ + 4.0681, + 30.5176 + ], + [ + 4.0171, + 30.2611 + ], + [ + 4.0, + 30.0 + ], + [ + 4.0171, + 29.7389 + ], + [ + 4.0681, + 29.4824 + ], + [ + 4.1522, + 29.2346 + ], + [ + 4.2679, + 29.0 + ], + [ + 4.4133, + 28.7825 + ], + [ + 4.5858, + 28.5858 + ], + [ + 4.7825, + 28.4133 + ], + [ + 5.0, + 28.2679 + ], + [ + 5.2346, + 28.1522 + ], + [ + 5.4824, + 28.0681 + ], + [ + 5.7389, + 28.0171 + ], + [ + 6.0, + 28.0 + ], + [ + 6.2611, + 28.0171 + ], + [ + 6.5176, + 28.0681 + ], + [ + 6.7654, + 28.1522 + ], + [ + 7.0, + 28.2679 + ], + [ + 7.2175, + 28.4133 + ], + [ + 7.4142, + 28.5858 + ], + [ + 7.5867, + 28.7825 + ], + [ + 7.7321, + 29.0 + ], + [ + 7.8478, + 29.2346 + ], + [ + 7.9319, + 29.4824 + ], + [ + 7.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.0, + 30.0 + ], + [ + 13.9829, + 30.2611 + ], + [ + 13.9319, + 30.5176 + ], + [ + 13.8478, + 30.7654 + ], + [ + 13.7321, + 31.0 + ], + [ + 13.5867, + 31.2175 + ], + [ + 13.4142, + 31.4142 + ], + [ + 13.2175, + 31.5867 + ], + [ + 13.0, + 31.7321 + ], + [ + 12.7654, + 31.8478 + ], + [ + 12.5176, + 31.9319 + ], + [ + 12.2611, + 31.9829 + ], + [ + 12.0, + 32.0 + ], + [ + 11.7389, + 31.9829 + ], + [ + 11.4824, + 31.9319 + ], + [ + 11.2346, + 31.8478 + ], + [ + 11.0, + 31.7321 + ], + [ + 10.7825, + 31.5867 + ], + [ + 10.5858, + 31.4142 + ], + [ + 10.4133, + 31.2175 + ], + [ + 10.2679, + 31.0 + ], + [ + 10.1522, + 30.7654 + ], + [ + 10.0681, + 30.5176 + ], + [ + 10.0171, + 30.2611 + ], + [ + 10.0, + 30.0 + ], + [ + 10.0171, + 29.7389 + ], + [ + 10.0681, + 29.4824 + ], + [ + 10.1522, + 29.2346 + ], + [ + 10.2679, + 29.0 + ], + [ + 10.4133, + 28.7825 + ], + [ + 10.5858, + 28.5858 + ], + [ + 10.7825, + 28.4133 + ], + [ + 11.0, + 28.2679 + ], + [ + 11.2346, + 28.1522 + ], + [ + 11.4824, + 28.0681 + ], + [ + 11.7389, + 28.0171 + ], + [ + 12.0, + 28.0 + ], + [ + 12.2611, + 28.0171 + ], + [ + 12.5176, + 28.0681 + ], + [ + 12.7654, + 28.1522 + ], + [ + 13.0, + 28.2679 + ], + [ + 13.2175, + 28.4133 + ], + [ + 13.4142, + 28.5858 + ], + [ + 13.5867, + 28.7825 + ], + [ + 13.7321, + 29.0 + ], + [ + 13.8478, + 29.2346 + ], + [ + 13.9319, + 29.4824 + ], + [ + 13.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20.0, + 30.0 + ], + [ + 19.9829, + 30.2611 + ], + [ + 19.9319, + 30.5176 + ], + [ + 19.8478, + 30.7654 + ], + [ + 19.7321, + 31.0 + ], + [ + 19.5867, + 31.2175 + ], + [ + 19.4142, + 31.4142 + ], + [ + 19.2175, + 31.5867 + ], + [ + 19.0, + 31.7321 + ], + [ + 18.7654, + 31.8478 + ], + [ + 18.5176, + 31.9319 + ], + [ + 18.2611, + 31.9829 + ], + [ + 18.0, + 32.0 + ], + [ + 17.7389, + 31.9829 + ], + [ + 17.4824, + 31.9319 + ], + [ + 17.2346, + 31.8478 + ], + [ + 17.0, + 31.7321 + ], + [ + 16.7825, + 31.5867 + ], + [ + 16.5858, + 31.4142 + ], + [ + 16.4133, + 31.2175 + ], + [ + 16.2679, + 31.0 + ], + [ + 16.1522, + 30.7654 + ], + [ + 16.0681, + 30.5176 + ], + [ + 16.0171, + 30.2611 + ], + [ + 16.0, + 30.0 + ], + [ + 16.0171, + 29.7389 + ], + [ + 16.0681, + 29.4824 + ], + [ + 16.1522, + 29.2346 + ], + [ + 16.2679, + 29.0 + ], + [ + 16.4133, + 28.7825 + ], + [ + 16.5858, + 28.5858 + ], + [ + 16.7825, + 28.4133 + ], + [ + 17.0, + 28.2679 + ], + [ + 17.2346, + 28.1522 + ], + [ + 17.4824, + 28.0681 + ], + [ + 17.7389, + 28.0171 + ], + [ + 18.0, + 28.0 + ], + [ + 18.2611, + 28.0171 + ], + [ + 18.5176, + 28.0681 + ], + [ + 18.7654, + 28.1522 + ], + [ + 19.0, + 28.2679 + ], + [ + 19.2175, + 28.4133 + ], + [ + 19.4142, + 28.5858 + ], + [ + 19.5867, + 28.7825 + ], + [ + 19.7321, + 29.0 + ], + [ + 19.8478, + 29.2346 + ], + [ + 19.9319, + 29.4824 + ], + [ + 19.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 26.0, + 30.0 + ], + [ + 25.9829, + 30.2611 + ], + [ + 25.9319, + 30.5176 + ], + [ + 25.8478, + 30.7654 + ], + [ + 25.7321, + 31.0 + ], + [ + 25.5867, + 31.2175 + ], + [ + 25.4142, + 31.4142 + ], + [ + 25.2175, + 31.5867 + ], + [ + 25.0, + 31.7321 + ], + [ + 24.7654, + 31.8478 + ], + [ + 24.5176, + 31.9319 + ], + [ + 24.2611, + 31.9829 + ], + [ + 24.0, + 32.0 + ], + [ + 23.7389, + 31.9829 + ], + [ + 23.4824, + 31.9319 + ], + [ + 23.2346, + 31.8478 + ], + [ + 23.0, + 31.7321 + ], + [ + 22.7825, + 31.5867 + ], + [ + 22.5858, + 31.4142 + ], + [ + 22.4133, + 31.2175 + ], + [ + 22.2679, + 31.0 + ], + [ + 22.1522, + 30.7654 + ], + [ + 22.0681, + 30.5176 + ], + [ + 22.0171, + 30.2611 + ], + [ + 22.0, + 30.0 + ], + [ + 22.0171, + 29.7389 + ], + [ + 22.0681, + 29.4824 + ], + [ + 22.1522, + 29.2346 + ], + [ + 22.2679, + 29.0 + ], + [ + 22.4133, + 28.7825 + ], + [ + 22.5858, + 28.5858 + ], + [ + 22.7825, + 28.4133 + ], + [ + 23.0, + 28.2679 + ], + [ + 23.2346, + 28.1522 + ], + [ + 23.4824, + 28.0681 + ], + [ + 23.7389, + 28.0171 + ], + [ + 24.0, + 28.0 + ], + [ + 24.2611, + 28.0171 + ], + [ + 24.5176, + 28.0681 + ], + [ + 24.7654, + 28.1522 + ], + [ + 25.0, + 28.2679 + ], + [ + 25.2175, + 28.4133 + ], + [ + 25.4142, + 28.5858 + ], + [ + 25.5867, + 28.7825 + ], + [ + 25.7321, + 29.0 + ], + [ + 25.8478, + 29.2346 + ], + [ + 25.9319, + 29.4824 + ], + [ + 25.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 32.0, + 30.0 + ], + [ + 31.9829, + 30.2611 + ], + [ + 31.9319, + 30.5176 + ], + [ + 31.8478, + 30.7654 + ], + [ + 31.7321, + 31.0 + ], + [ + 31.5867, + 31.2175 + ], + [ + 31.4142, + 31.4142 + ], + [ + 31.2175, + 31.5867 + ], + [ + 31.0, + 31.7321 + ], + [ + 30.7654, + 31.8478 + ], + [ + 30.5176, + 31.9319 + ], + [ + 30.2611, + 31.9829 + ], + [ + 30.0, + 32.0 + ], + [ + 29.7389, + 31.9829 + ], + [ + 29.4824, + 31.9319 + ], + [ + 29.2346, + 31.8478 + ], + [ + 29.0, + 31.7321 + ], + [ + 28.7825, + 31.5867 + ], + [ + 28.5858, + 31.4142 + ], + [ + 28.4133, + 31.2175 + ], + [ + 28.2679, + 31.0 + ], + [ + 28.1522, + 30.7654 + ], + [ + 28.0681, + 30.5176 + ], + [ + 28.0171, + 30.2611 + ], + [ + 28.0, + 30.0 + ], + [ + 28.0171, + 29.7389 + ], + [ + 28.0681, + 29.4824 + ], + [ + 28.1522, + 29.2346 + ], + [ + 28.2679, + 29.0 + ], + [ + 28.4133, + 28.7825 + ], + [ + 28.5858, + 28.5858 + ], + [ + 28.7825, + 28.4133 + ], + [ + 29.0, + 28.2679 + ], + [ + 29.2346, + 28.1522 + ], + [ + 29.4824, + 28.0681 + ], + [ + 29.7389, + 28.0171 + ], + [ + 30.0, + 28.0 + ], + [ + 30.2611, + 28.0171 + ], + [ + 30.5176, + 28.0681 + ], + [ + 30.7654, + 28.1522 + ], + [ + 31.0, + 28.2679 + ], + [ + 31.2175, + 28.4133 + ], + [ + 31.4142, + 28.5858 + ], + [ + 31.5867, + 28.7825 + ], + [ + 31.7321, + 29.0 + ], + [ + 31.8478, + 29.2346 + ], + [ + 31.9319, + 29.4824 + ], + [ + 31.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 38.0, + 30.0 + ], + [ + 37.9829, + 30.2611 + ], + [ + 37.9319, + 30.5176 + ], + [ + 37.8478, + 30.7654 + ], + [ + 37.7321, + 31.0 + ], + [ + 37.5867, + 31.2175 + ], + [ + 37.4142, + 31.4142 + ], + [ + 37.2175, + 31.5867 + ], + [ + 37.0, + 31.7321 + ], + [ + 36.7654, + 31.8478 + ], + [ + 36.5176, + 31.9319 + ], + [ + 36.2611, + 31.9829 + ], + [ + 36.0, + 32.0 + ], + [ + 35.7389, + 31.9829 + ], + [ + 35.4824, + 31.9319 + ], + [ + 35.2346, + 31.8478 + ], + [ + 35.0, + 31.7321 + ], + [ + 34.7825, + 31.5867 + ], + [ + 34.5858, + 31.4142 + ], + [ + 34.4133, + 31.2175 + ], + [ + 34.2679, + 31.0 + ], + [ + 34.1522, + 30.7654 + ], + [ + 34.0681, + 30.5176 + ], + [ + 34.0171, + 30.2611 + ], + [ + 34.0, + 30.0 + ], + [ + 34.0171, + 29.7389 + ], + [ + 34.0681, + 29.4824 + ], + [ + 34.1522, + 29.2346 + ], + [ + 34.2679, + 29.0 + ], + [ + 34.4133, + 28.7825 + ], + [ + 34.5858, + 28.5858 + ], + [ + 34.7825, + 28.4133 + ], + [ + 35.0, + 28.2679 + ], + [ + 35.2346, + 28.1522 + ], + [ + 35.4824, + 28.0681 + ], + [ + 35.7389, + 28.0171 + ], + [ + 36.0, + 28.0 + ], + [ + 36.2611, + 28.0171 + ], + [ + 36.5176, + 28.0681 + ], + [ + 36.7654, + 28.1522 + ], + [ + 37.0, + 28.2679 + ], + [ + 37.2175, + 28.4133 + ], + [ + 37.4142, + 28.5858 + ], + [ + 37.5867, + 28.7825 + ], + [ + 37.7321, + 29.0 + ], + [ + 37.8478, + 29.2346 + ], + [ + 37.9319, + 29.4824 + ], + [ + 37.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 44.0, + 30.0 + ], + [ + 43.9829, + 30.2611 + ], + [ + 43.9319, + 30.5176 + ], + [ + 43.8478, + 30.7654 + ], + [ + 43.7321, + 31.0 + ], + [ + 43.5867, + 31.2175 + ], + [ + 43.4142, + 31.4142 + ], + [ + 43.2175, + 31.5867 + ], + [ + 43.0, + 31.7321 + ], + [ + 42.7654, + 31.8478 + ], + [ + 42.5176, + 31.9319 + ], + [ + 42.2611, + 31.9829 + ], + [ + 42.0, + 32.0 + ], + [ + 41.7389, + 31.9829 + ], + [ + 41.4824, + 31.9319 + ], + [ + 41.2346, + 31.8478 + ], + [ + 41.0, + 31.7321 + ], + [ + 40.7825, + 31.5867 + ], + [ + 40.5858, + 31.4142 + ], + [ + 40.4133, + 31.2175 + ], + [ + 40.2679, + 31.0 + ], + [ + 40.1522, + 30.7654 + ], + [ + 40.0681, + 30.5176 + ], + [ + 40.0171, + 30.2611 + ], + [ + 40.0, + 30.0 + ], + [ + 40.0171, + 29.7389 + ], + [ + 40.0681, + 29.4824 + ], + [ + 40.1522, + 29.2346 + ], + [ + 40.2679, + 29.0 + ], + [ + 40.4133, + 28.7825 + ], + [ + 40.5858, + 28.5858 + ], + [ + 40.7825, + 28.4133 + ], + [ + 41.0, + 28.2679 + ], + [ + 41.2346, + 28.1522 + ], + [ + 41.4824, + 28.0681 + ], + [ + 41.7389, + 28.0171 + ], + [ + 42.0, + 28.0 + ], + [ + 42.2611, + 28.0171 + ], + [ + 42.5176, + 28.0681 + ], + [ + 42.7654, + 28.1522 + ], + [ + 43.0, + 28.2679 + ], + [ + 43.2175, + 28.4133 + ], + [ + 43.4142, + 28.5858 + ], + [ + 43.5867, + 28.7825 + ], + [ + 43.7321, + 29.0 + ], + [ + 43.8478, + 29.2346 + ], + [ + 43.9319, + 29.4824 + ], + [ + 43.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 50.0, + 30.0 + ], + [ + 49.9829, + 30.2611 + ], + [ + 49.9319, + 30.5176 + ], + [ + 49.8478, + 30.7654 + ], + [ + 49.7321, + 31.0 + ], + [ + 49.5867, + 31.2175 + ], + [ + 49.4142, + 31.4142 + ], + [ + 49.2175, + 31.5867 + ], + [ + 49.0, + 31.7321 + ], + [ + 48.7654, + 31.8478 + ], + [ + 48.5176, + 31.9319 + ], + [ + 48.2611, + 31.9829 + ], + [ + 48.0, + 32.0 + ], + [ + 47.7389, + 31.9829 + ], + [ + 47.4824, + 31.9319 + ], + [ + 47.2346, + 31.8478 + ], + [ + 47.0, + 31.7321 + ], + [ + 46.7825, + 31.5867 + ], + [ + 46.5858, + 31.4142 + ], + [ + 46.4133, + 31.2175 + ], + [ + 46.2679, + 31.0 + ], + [ + 46.1522, + 30.7654 + ], + [ + 46.0681, + 30.5176 + ], + [ + 46.0171, + 30.2611 + ], + [ + 46.0, + 30.0 + ], + [ + 46.0171, + 29.7389 + ], + [ + 46.0681, + 29.4824 + ], + [ + 46.1522, + 29.2346 + ], + [ + 46.2679, + 29.0 + ], + [ + 46.4133, + 28.7825 + ], + [ + 46.5858, + 28.5858 + ], + [ + 46.7825, + 28.4133 + ], + [ + 47.0, + 28.2679 + ], + [ + 47.2346, + 28.1522 + ], + [ + 47.4824, + 28.0681 + ], + [ + 47.7389, + 28.0171 + ], + [ + 48.0, + 28.0 + ], + [ + 48.2611, + 28.0171 + ], + [ + 48.5176, + 28.0681 + ], + [ + 48.7654, + 28.1522 + ], + [ + 49.0, + 28.2679 + ], + [ + 49.2175, + 28.4133 + ], + [ + 49.4142, + 28.5858 + ], + [ + 49.5867, + 28.7825 + ], + [ + 49.7321, + 29.0 + ], + [ + 49.8478, + 29.2346 + ], + [ + 49.9319, + 29.4824 + ], + [ + 49.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 56.0, + 30.0 + ], + [ + 55.9829, + 30.2611 + ], + [ + 55.9319, + 30.5176 + ], + [ + 55.8478, + 30.7654 + ], + [ + 55.7321, + 31.0 + ], + [ + 55.5867, + 31.2175 + ], + [ + 55.4142, + 31.4142 + ], + [ + 55.2175, + 31.5867 + ], + [ + 55.0, + 31.7321 + ], + [ + 54.7654, + 31.8478 + ], + [ + 54.5176, + 31.9319 + ], + [ + 54.2611, + 31.9829 + ], + [ + 54.0, + 32.0 + ], + [ + 53.7389, + 31.9829 + ], + [ + 53.4824, + 31.9319 + ], + [ + 53.2346, + 31.8478 + ], + [ + 53.0, + 31.7321 + ], + [ + 52.7825, + 31.5867 + ], + [ + 52.5858, + 31.4142 + ], + [ + 52.4133, + 31.2175 + ], + [ + 52.2679, + 31.0 + ], + [ + 52.1522, + 30.7654 + ], + [ + 52.0681, + 30.5176 + ], + [ + 52.0171, + 30.2611 + ], + [ + 52.0, + 30.0 + ], + [ + 52.0171, + 29.7389 + ], + [ + 52.0681, + 29.4824 + ], + [ + 52.1522, + 29.2346 + ], + [ + 52.2679, + 29.0 + ], + [ + 52.4133, + 28.7825 + ], + [ + 52.5858, + 28.5858 + ], + [ + 52.7825, + 28.4133 + ], + [ + 53.0, + 28.2679 + ], + [ + 53.2346, + 28.1522 + ], + [ + 53.4824, + 28.0681 + ], + [ + 53.7389, + 28.0171 + ], + [ + 54.0, + 28.0 + ], + [ + 54.2611, + 28.0171 + ], + [ + 54.5176, + 28.0681 + ], + [ + 54.7654, + 28.1522 + ], + [ + 55.0, + 28.2679 + ], + [ + 55.2175, + 28.4133 + ], + [ + 55.4142, + 28.5858 + ], + [ + 55.5867, + 28.7825 + ], + [ + 55.7321, + 29.0 + ], + [ + 55.8478, + 29.2346 + ], + [ + 55.9319, + 29.4824 + ], + [ + 55.9829, + 29.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 2.0, + 36.0 + ], + [ + 1.9829, + 36.2611 + ], + [ + 1.9319, + 36.5176 + ], + [ + 1.8478, + 36.7654 + ], + [ + 1.7321, + 37.0 + ], + [ + 1.5867, + 37.2175 + ], + [ + 1.4142, + 37.4142 + ], + [ + 1.2175, + 37.5867 + ], + [ + 1.0, + 37.7321 + ], + [ + 0.7654, + 37.8478 + ], + [ + 0.5176, + 37.9319 + ], + [ + 0.2611, + 37.9829 + ], + [ + 0.0, + 38.0 + ], + [ + -0.2611, + 37.9829 + ], + [ + -0.5176, + 37.9319 + ], + [ + -0.7654, + 37.8478 + ], + [ + -1.0, + 37.7321 + ], + [ + -1.2175, + 37.5867 + ], + [ + -1.4142, + 37.4142 + ], + [ + -1.5867, + 37.2175 + ], + [ + -1.7321, + 37.0 + ], + [ + -1.8478, + 36.7654 + ], + [ + -1.9319, + 36.5176 + ], + [ + -1.9829, + 36.2611 + ], + [ + -2.0, + 36.0 + ], + [ + -1.9829, + 35.7389 + ], + [ + -1.9319, + 35.4824 + ], + [ + -1.8478, + 35.2346 + ], + [ + -1.7321, + 35.0 + ], + [ + -1.5867, + 34.7825 + ], + [ + -1.4142, + 34.5858 + ], + [ + -1.2175, + 34.4133 + ], + [ + -1.0, + 34.2679 + ], + [ + -0.7654, + 34.1522 + ], + [ + -0.5176, + 34.0681 + ], + [ + -0.2611, + 34.0171 + ], + [ + -0.0, + 34.0 + ], + [ + 0.2611, + 34.0171 + ], + [ + 0.5176, + 34.0681 + ], + [ + 0.7654, + 34.1522 + ], + [ + 1.0, + 34.2679 + ], + [ + 1.2175, + 34.4133 + ], + [ + 1.4142, + 34.5858 + ], + [ + 1.5867, + 34.7825 + ], + [ + 1.7321, + 35.0 + ], + [ + 1.8478, + 35.2346 + ], + [ + 1.9319, + 35.4824 + ], + [ + 1.9829, + 35.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 8.0, + 36.0 + ], + [ + 7.9829, + 36.2611 + ], + [ + 7.9319, + 36.5176 + ], + [ + 7.8478, + 36.7654 + ], + [ + 7.7321, + 37.0 + ], + [ + 7.5867, + 37.2175 + ], + [ + 7.4142, + 37.4142 + ], + [ + 7.2175, + 37.5867 + ], + [ + 7.0, + 37.7321 + ], + [ + 6.7654, + 37.8478 + ], + [ + 6.5176, + 37.9319 + ], + [ + 6.2611, + 37.9829 + ], + [ + 6.0, + 38.0 + ], + [ + 5.7389, + 37.9829 + ], + [ + 5.4824, + 37.9319 + ], + [ + 5.2346, + 37.8478 + ], + [ + 5.0, + 37.7321 + ], + [ + 4.7825, + 37.5867 + ], + [ + 4.5858, + 37.4142 + ], + [ + 4.4133, + 37.2175 + ], + [ + 4.2679, + 37.0 + ], + [ + 4.1522, + 36.7654 + ], + [ + 4.0681, + 36.5176 + ], + [ + 4.0171, + 36.2611 + ], + [ + 4.0, + 36.0 + ], + [ + 4.0171, + 35.7389 + ], + [ + 4.0681, + 35.4824 + ], + [ + 4.1522, + 35.2346 + ], + [ + 4.2679, + 35.0 + ], + [ + 4.4133, + 34.7825 + ], + [ + 4.5858, + 34.5858 + ], + [ + 4.7825, + 34.4133 + ], + [ + 5.0, + 34.2679 + ], + [ + 5.2346, + 34.1522 + ], + [ + 5.4824, + 34.0681 + ], + [ + 5.7389, + 34.0171 + ], + [ + 6.0, + 34.0 + ], + [ + 6.2611, + 34.0171 + ], + [ + 6.5176, + 34.0681 + ], + [ + 6.7654, + 34.1522 + ], + [ + 7.0, + 34.2679 + ], + [ + 7.2175, + 34.4133 + ], + [ + 7.4142, + 34.5858 + ], + [ + 7.5867, + 34.7825 + ], + [ + 7.7321, + 35.0 + ], + [ + 7.8478, + 35.2346 + ], + [ + 7.9319, + 35.4824 + ], + [ + 7.9829, + 35.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 14.0, + 36.0 + ], + [ + 13.9829, + 36.2611 + ], + [ + 13.9319, + 36.5176 + ], + [ + 13.8478, + 36.7654 + ], + [ + 13.7321, + 37.0 + ], + [ + 13.5867, + 37.2175 + ], + [ + 13.4142, + 37.4142 + ], + [ + 13.2175, + 37.5867 + ], + [ + 13.0, + 37.7321 + ], + [ + 12.7654, + 37.8478 + ], + [ + 12.5176, + 37.9319 + ], + [ + 12.2611, + 37.9829 + ], + [ + 12.0, + 38.0 + ], + [ + 11.7389, + 37.9829 + ], + [ + 11.4824, + 37.9319 + ], + [ + 11.2346, + 37.8478 + ], + [ + 11.0, + 37.7321 + ], + [ + 10.7825, + 37.5867 + ], + [ + 10.5858, + 37.4142 + ], + [ + 10.4133, + 37.2175 + ], + [ + 10.2679, + 37.0 + ], + [ + 10.1522, + 36.7654 + ], + [ + 10.0681, + 36.5176 + ], + [ + 10.0171, + 36.2611 + ], + [ + 10.0, + 36.0 + ], + [ + 10.0171, + 35.7389 + ], + [ + 10.0681, + 35.4824 + ], + [ + 10.1522, + 35.2346 + ], + [ + 10.2679, + 35.0 + ], + [ + 10.4133, + 34.7825 + ], + [ + 10.5858, + 34.5858 + ], + [ + 10.7825, + 34.4133 + ], + [ + 11.0, + 34.2679 + ], + [ + 11.2346, + 34.1522 + ], + [ + 11.4824, + 34.0681 + ], + [ + 11.7389, + 34.0171 + ], + [ + 12.0, + 34.0 + ], + [ + 12.2611, + 34.0171 + ], + [ + 12.5176, + 34.0681 + ], + [ + 12.7654, + 34.1522 + ], + [ + 13.0, + 34.2679 + ], + [ + 13.2175, + 34.4133 + ], + [ + 13.4142, + 34.5858 + ], + [ + 13.5867, + 34.7825 + ], + [ + 13.7321, + 35.0 + ], + [ + 13.8478, + 35.2346 + ], + [ + 13.9319, + 35.4824 + ], + [ + 13.9829, + 35.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 20.0, + 36.0 + ], + [ + 19.9829, + 36.2611 + ], + [ + 19.9319, + 36.5176 + ], + [ + 19.8478, + 36.7654 + ], + [ + 19.7321, + 37.0 + ], + [ + 19.5867, + 37.2175 + ], + [ + 19.4142, + 37.4142 + ], + [ + 19.2175, + 37.5867 + ], + [ + 19.0, + 37.7321 + ], + [ + 18.7654, + 37.8478 + ], + [ + 18.5176, + 37.9319 + ], + [ + 18.2611, + 37.9829 + ], + [ + 18.0, + 38.0 + ], + [ + 17.7389, + 37.9829 + ], + [ + 17.4824, + 37.9319 + ], + [ + 17.2346, + 37.8478 + ], + [ + 17.0, + 37.7321 + ], + [ + 16.7825, + 37.5867 + ], + [ + 16.5858, + 37.4142 + ], + [ + 16.4133, + 37.2175 + ], + [ + 16.2679, + 37.0 + ], + [ + 16.1522, + 36.7654 + ], + [ + 16.0681, + 36.5176 + ], + [ + 16.0171, + 36.2611 + ], + [ + 16.0, + 36.0 + ], + [ + 16.0171, + 35.7389 + ], + [ + 16.0681, + 35.4824 + ], + [ + 16.1522, + 35.2346 + ], + [ + 16.2679, + 35.0 + ], + [ + 16.4133, + 34.7825 + ], + [ + 16.5858, + 34.5858 + ], + [ + 16.7825, + 34.4133 + ], + [ + 17.0, + 34.2679 + ], + [ + 17.2346, + 34.1522 + ], + [ + 17.4824, + 34.0681 + ], + [ + 17.7389, + 34.0171 + ], + [ + 18.0, + 34.0 + ], + [ + 18.2611, + 34.0171 + ], + [ + 18.5176, + 34.0681 + ], + [ + 18.7654, + 34.1522 + ], + [ + 19.0, + 34.2679 + ], + [ + 19.2175, + 34.4133 + ], + [ + 19.4142, + 34.5858 + ], + [ + 19.5867, + 34.7825 + ], + [ + 19.7321, + 35.0 + ], + [ + 19.8478, + 35.2346 + ], + [ + 19.9319, + 35.4824 + ], + [ + 19.9829, + 35.7389 + ] + ], + "closed": true + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 1, + "profiles": "all", + "operation": "new", + "body_name": "Peg" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Peg", + "tools": [ + "Peg (2)", + "Peg (3)", + "Peg (4)", + "Peg (5)", + "Peg (6)", + "Peg (7)", + "Peg (8)", + "Peg (9)", + "Peg (10)", + "Peg (11)", + "Peg (12)", + "Peg (13)", + "Peg (14)", + "Peg (15)", + "Peg (16)", + "Peg (17)", + "Peg (18)", + "Peg (19)", + "Peg (20)", + "Peg (21)", + "Peg (22)", + "Peg (23)", + "Peg (24)", + "Peg (25)", + "Peg (26)", + "Peg (27)", + "Peg (28)", + "Peg (29)", + "Peg (30)", + "Peg (31)", + "Peg (32)", + "Peg (33)", + "Peg (34)", + "Peg (35)", + "Peg (36)", + "Peg (37)", + "Peg (38)", + "Peg (39)", + "Peg (40)", + "Peg (41)", + "Peg (42)", + "Peg (43)", + "Peg (44)", + "Peg (45)", + "Peg (46)", + "Peg (47)", + "Peg (48)", + "Peg (49)", + "Peg (50)", + "Peg (51)", + "Peg (52)", + "Peg (53)", + "Peg (54)", + "Peg (55)", + "Peg (56)", + "Peg (57)", + "Peg (58)", + "Peg (59)", + "Peg (60)", + "Peg (61)", + "Peg (62)", + "Peg (63)", + "Peg (64)" + ], + "operation": "join" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/expected.json b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/expected.json new file mode 100644 index 000000000..165143d57 --- /dev/null +++ b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3456", + "tangency-labs/solidcraft#3497" + ], + "what": "a deep cut that removes everything above z=2 of a tapered body with nine through-bores, leaving the 2 mm drilled base", + "source": "analytic", + "method": "cone frustum r=30 at z=0 to r=20 at z=100 (a tapered extrude, narrowing by atan(0.1)=5.7106 deg) (r(z)=30-0.1z) with nine r=1.5 bores (centre + eight on r=10). Removing z>2 leaves the slab z 0..2: frustum slice pi*2/3*(30^2+30*29.8+29.8^2) minus 9*pi*1.5^2*2. Faces: base, top, cone side, nine bore walls = 12", + "body_count": 1, + "volume_mm3": 5490.0169, + "faces": 12 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/recipe.json b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/recipe.json new file mode 100644 index 000000000..b350a9e68 --- /dev/null +++ b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/recipe.json @@ -0,0 +1,210 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 30 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 100, + "taper": "-5.710593137 deg", + "operation": "new", + "body_name": "Taper" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + 0, + 0, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + 10.0, + 0.0, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + 7.071068, + 7.071068, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + 0.0, + 10.0, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + -7.071068, + 7.071068, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + -10.0, + 0.0, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + -7.071068, + -7.071068, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + -0.0, + -10.0, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 1.5, + "height": 102, + "base": [ + 7.071068, + -7.071068, + -1 + ], + "operation": "cut", + "targets": [ + "Taper" + ] + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + -50, + -50, + 2 + ], + "length": 100, + "width": 100, + "height": 98, + "operation": "cut", + "targets": [ + "Taper" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/expected.json b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/expected.json new file mode 100644 index 000000000..ec28a7585 --- /dev/null +++ b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/expected.json @@ -0,0 +1,13 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3460" + ], + "what": "Combine cut (keep tools) of an enclosure by its lid whose insert is flush with the inner walls and carries four small half-moon tabs that cross them; the cut must not return the target unchanged", + "source": "analytic", + "method": "enclosure 40x30x20 minus cavity 36x26x18 = 7152; lid insert 36x26x8 flush with the cavity walls and top, plus four vertical cylinders r=2.5, 6 tall, centred 2 mm inside each wall so each pokes 0.5 mm into the wall: overlap per tab is a circular segment (chord 3, sagitta 0.5) of area 2.5^2*acos(0.8) - 2*1.5 = 1.0219, times 6. The cut moves 4*6*1.0219 = 24.5 mm3 from the enclosure into nothing and the lid is kept, so the two bodies together hold 7152 + 36*26*8 + 24.5 - 24.5 = 14640 (an unchanged target would total 14664.5). Graded with rel 5e-4 so a no-op cut is caught; body_count 2", + "body_count": 2, + "volume_mm3": 14640.0, + "tolerance": { + "rel": 0.0005 + } +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/recipe.json b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/recipe.json new file mode 100644 index 000000000..6dcb45d94 --- /dev/null +++ b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/recipe.json @@ -0,0 +1,124 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + 0 + ], + "length": 40, + "width": 30, + "height": 20, + "body_name": "Enc" + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + 2, + 2, + 2 + ], + "length": 36, + "width": 26, + "height": 18, + "operation": "cut", + "targets": [ + "Enc" + ] + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + 2, + 2, + 12 + ], + "length": 36, + "width": 26, + "height": 8, + "body_name": "Lid" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 2.5, + "height": 6, + "base": [ + 4, + 15, + 13 + ], + "operation": "join", + "targets": [ + "Lid" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 2.5, + "height": 6, + "base": [ + 36, + 15, + 13 + ], + "operation": "join", + "targets": [ + "Lid" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 2.5, + "height": 6, + "base": [ + 20, + 4, + 13 + ], + "operation": "join", + "targets": [ + "Lid" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 2.5, + "height": 6, + "base": [ + 20, + 26, + 13 + ], + "operation": "join", + "targets": [ + "Lid" + ] + } + }, + { + "command": "solid.combine", + "params": { + "target": "Enc", + "tools": [ + "Lid" + ], + "operation": "cut", + "keep_tools": true + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/expected.json b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/expected.json new file mode 100644 index 000000000..3ab0017d3 --- /dev/null +++ b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3485", + "tangency-labs/solidcraft#3062" + ], + "what": "a boss joined on a rod's top face (the join runs the boss on into the rod); the rod's side must stay one face, not seamed at the boss's foot", + "source": "analytic", + "method": "rod r=7, h=48.2 plus boss r=2.7 standing 2 mm above the top: V = pi*(7^2*48.2 + 2.7^2*2). Faces: rod bottom, rod side, rod top ring, boss side, boss top = 5 (the rod's side has no seam at the boss's foot)", + "body_count": 1, + "volume_mm3": 7465.618, + "faces": 5 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/recipe.json b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/recipe.json new file mode 100644 index 000000000..b69ad72f0 --- /dev/null +++ b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/recipe.json @@ -0,0 +1,58 @@ +{ + "commands": [ + { + "command": "solid.cylinder", + "params": { + "radius": 7, + "height": 48.2, + "body_name": "Rod" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 48.2 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 2.7 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 2, + "operation": "join", + "targets": [ + "Rod" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/expected.json b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/expected.json new file mode 100644 index 000000000..c3b8194cf --- /dev/null +++ b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3497", + "tangency-labs/solidcraft#3456" + ], + "what": "intersection of two collinear R2 H12 cylinders offset by 0.75 along the axis (curved walls coincide over part of the height)", + "source": "analytic", + "method": "common part is the cylinder r=2 from z=0.75 to 12, height 11.25: V = pi*4*11.25 = 45 pi. Faces: 2 caps + 1 side = 3", + "body_count": 1, + "volume_mm3": 141.3717, + "faces": 3 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/recipe.json b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/recipe.json new file mode 100644 index 000000000..43c129508 --- /dev/null +++ b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/recipe.json @@ -0,0 +1,35 @@ +{ + "commands": [ + { + "command": "solid.cylinder", + "params": { + "radius": 2, + "height": 12, + "body_name": "A" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 2, + "height": 12, + "base": [ + 0, + 0, + 0.75 + ], + "body_name": "B" + } + }, + { + "command": "solid.combine", + "params": { + "target": "A", + "tools": [ + "B" + ], + "operation": "intersect" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/expected.json b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/expected.json new file mode 100644 index 000000000..df3c017f5 --- /dev/null +++ b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3497", + "tangency-labs/solidcraft#3456" + ], + "what": "a pin r=3.02 intersected with a tube whose bore is r=3: a thin annulus (0.02 mm overlap on a curved wall)", + "source": "analytic", + "method": "overlap is the annulus r 3..3.02, h=6: V = pi*(3.02^2 - 3^2)*6 = 2.2695 (the PR quotes 2.269486533). Faces: 2 rings + inner + outer wall = 4", + "body_count": 1, + "volume_mm3": 2.269487, + "faces": 4 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/recipe.json b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/recipe.json new file mode 100644 index 000000000..60bd4f94b --- /dev/null +++ b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/recipe.json @@ -0,0 +1,48 @@ +{ + "commands": [ + { + "command": "solid.cylinder", + "params": { + "radius": 6, + "height": 6, + "body_name": "Tube" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 3, + "height": 6, + "body_name": "Bore" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Tube", + "tools": [ + "Bore" + ], + "operation": "cut" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 3.02, + "height": 6, + "body_name": "Pin" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Tube", + "tools": [ + "Pin" + ], + "operation": "intersect" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/expected.json b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/expected.json new file mode 100644 index 000000000..94d7b2703 --- /dev/null +++ b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/expected.json @@ -0,0 +1,12 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3526", + "tangency-labs/solidcraft#3888" + ], + "what": "intersect of a two-lump target (two spheres joined while apart) with a box holding the bottom half of each", + "source": "analytic", + "method": "box x -10..40, y -10..10, z -10..0 holds the z<=0 half of each r=4 sphere (centres (0,0,0), (30,0,0)): V = 2 * (2/3) pi 4^3 = 268.083. The body must not be removed. valid is false only because the one body holds two separate shells, which the rig's one-shell check does not allow", + "body_count": 1, + "volume_mm3": 268.0826, + "valid": false +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/recipe.json b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/recipe.json new file mode 100644 index 000000000..cd071542d --- /dev/null +++ b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/recipe.json @@ -0,0 +1,57 @@ +{ + "commands": [ + { + "command": "solid.sphere", + "params": { + "radius": 4, + "center": [ + 0, + 0, + 0 + ], + "operation": "new", + "body_name": "Balls" + } + }, + { + "command": "solid.sphere", + "params": { + "radius": 4, + "center": [ + 30, + 0, + 0 + ], + "operation": "join", + "targets": [ + "Balls" + ] + } + }, + { + "command": "solid.box", + "params": { + "length": 50, + "width": 20, + "height": 10, + "corner": [ + -10, + -10, + -10 + ], + "operation": "new", + "body_name": "Box" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Balls", + "tools": [ + "Box" + ], + "operation": "intersect" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/expected.json b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/expected.json new file mode 100644 index 000000000..1113b7546 --- /dev/null +++ b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3604", + "tangency-labs/solidcraft#3613" + ], + "what": "cut of a box by a swept G2 corner-removal tool along a projected edge chain (left-rear corner; the symmetric front-left chain works)", + "source": "invariants", + "method": "no closed form for the free-form tool: the tool lies on the box's bottom edge and overlaps it, so the cut must succeed with one valid closed solid (the tool is consumed). No volume is graded", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/recipe.json b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/recipe.json new file mode 100644 index 000000000..54d7a532c --- /dev/null +++ b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/recipe.json @@ -0,0 +1,198 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + 0 + ], + "length": 40, + "width": 20, + "height": 10, + "operation": "new", + "body_name": "B" + } + }, + { + "command": "solid.fillet", + "params": { + "body": "B", + "edges": [ + [ + 0, + 0, + 5 + ], + [ + 40, + 0, + 5 + ], + [ + 40, + 20, + 5 + ], + [ + 0, + 20, + 5 + ] + ], + "radius": 5, + "type": "g2" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "face": [ + 20, + 10, + 0 + ] + }, + "project_edges": true, + "name": "Bottom" + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 15, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "RB" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -0.2, + -0.2 + ], + [ + 0.8, + -0.2 + ] + ], + "ids": [ + "o1" + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0.8, + -0.2 + ], + [ + 0.8, + 0 + ] + ], + "ids": [ + "o2" + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 0, + 0.8 + ], + [ + -0.2, + 0.8 + ] + ], + "ids": [ + "o3" + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -0.2, + 0.8 + ], + [ + -0.2, + -0.2 + ] + ], + "ids": [ + "o4" + ] + } + }, + { + "command": "sketch.blend_curve", + "params": { + "a": "o2.end", + "b": "o3.start", + "continuity": "g2" + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.sweep", + "params": { + "sketch": "RB", + "path_sketch": "Bottom", + "path": [ + "s2", + "l3" + ], + "orientation": "perpendicular", + "operation": "new", + "body_name": "Tool" + } + }, + { + "command": "solid.combine", + "params": { + "target": "B", + "tools": [ + "Tool" + ], + "operation": "cut" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/expected.json b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/expected.json new file mode 100644 index 000000000..3edaa04a8 --- /dev/null +++ b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3612", + "tangency-labs/solidcraft#3379" + ], + "what": "a spoke whose inner face x=12 is exactly tangent to the hub cylinder r=12 (line contact), joined to the rim, patterned 5 times around the hub's axis", + "source": "analytic", + "method": "rim r63..66 h3: pi(66^2-63^2)*3; hub r12 h3: pi*144*3; each spoke (x 12..64, y 0.5..2.5, z +-1.25) adds the part outside hub and rim: 2*(integral over z=-1.25..1.25 of sqrt(63^2-z^2) - 12) = 254.979 (the spoke's foot lies inside the rim; at z=+-1.25 the hub reaches x=11.93 so it never overlaps the spoke). Spokes are 72 deg apart and do not overlap: V = 5004.557 + 5*254.979 = 6279.454", + "volume_mm3": 6279.4538 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/recipe.json b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/recipe.json new file mode 100644 index 000000000..4b2a90523 --- /dev/null +++ b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/recipe.json @@ -0,0 +1,65 @@ +{ + "commands": [ + { + "command": "solid.cylinder", + "params": { + "radius": 66, + "height": 3, + "axis": "Y", + "body_name": "Wheel" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 63, + "height": 3, + "axis": "Y", + "operation": "cut", + "targets": [ + "Wheel" + ] + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 12, + "height": 3, + "axis": "Y", + "operation": "join", + "targets": [ + "Wheel" + ] + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + 12, + 0.5, + -1.25 + ], + "length": 52, + "width": 2, + "height": 2.5, + "operation": "join", + "targets": [ + "Wheel" + ] + } + }, + { + "command": "solid.pattern.circular", + "params": { + "features": [ + "Box1" + ], + "axis": "Y", + "count": 5, + "angle": "360 deg" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/expected.json b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/expected.json new file mode 100644 index 000000000..ba94c6f0d --- /dev/null +++ b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/expected.json @@ -0,0 +1,14 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3633", + "tangency-labs/solidcraft#3682" + ], + "what": "a sphere r=10 intersected with a square pyramid whose apex is the sphere's centre and whose sides lie in the planes of the sphere primitive's patch edges", + "source": "analytic", + "method": "the pyramid has apex (0,0,0) and base 20x20 at x=-10 (corners (-10,+-10,+-10)): a cone over a cube face, a sixth of all directions, and the base is tangent to the sphere at (-10,0,0). The intersection is a sixth of the ball: V = (4/3) pi 10^3 / 6 = 698.132. Faces: 4 planar sides + 1 spherical = 5; edges 4 radial + 4 arcs = 8; vertices: apex + 4 corners on the sphere = 5", + "body_count": 1, + "volume_mm3": 698.1317, + "faces": 5, + "edges": 8, + "vertices": 5 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/recipe.json b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/recipe.json new file mode 100644 index 000000000..1c73fa2b2 --- /dev/null +++ b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/recipe.json @@ -0,0 +1,113 @@ +{ + "commands": [ + { + "command": "solid.sphere", + "params": { + "radius": 10, + "body_name": "Ball" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + -10, + 0, + 0 + ], + "x_dir": [ + 0, + 1, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Base" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -10, + -10 + ], + "p1": [ + 10, + 10 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 0, + 1, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Apex" + } + }, + { + "command": "sketch.point", + "params": { + "point": [ + 0, + 0 + ], + "id": "apex" + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.loft", + "params": { + "sections": [ + { + "sketch": "Base" + }, + { + "sketch": "Apex", + "point": "apex" + } + ], + "body_name": "Pyramid" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Ball", + "tools": [ + "Pyramid" + ], + "operation": "intersect" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/expected.json b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/expected.json new file mode 100644 index 000000000..9a79e4f06 --- /dev/null +++ b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3652" + ], + "what": "mirror a Mirror feature (the first mirror's hole) about a second plane: 'Mirror1 cannot be patterned or mirrored yet'", + "source": "analytic", + "method": "plate 100x60x10 with a through hole r=3 at (20,10). Mirror1 (about YZ) adds the hole at (-20,10); mirroring Mirror1 about XZ reflects the hole it made to (-20,-10). Three holes, no overlaps: V = 60000 - 3*pi*9*10 = 59151.77", + "body_count": 1, + "volume_mm3": 59151.77 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/recipe.json b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/recipe.json new file mode 100644 index 000000000..38ec95cac --- /dev/null +++ b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/recipe.json @@ -0,0 +1,83 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + -50, + -30, + 0 + ], + "length": 100, + "width": 60, + "height": 10, + "body_name": "Plate" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 10 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 20, + 10 + ], + "radius": 3 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 10, + "direction": "negative", + "operation": "cut", + "targets": [ + "Plate" + ] + } + }, + { + "command": "solid.mirror", + "params": { + "features": [ + "Extrude1" + ], + "plane": "YZ" + } + }, + { + "command": "solid.mirror", + "params": { + "features": [ + "Mirror1" + ], + "plane": "XZ" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/expected.json b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/expected.json new file mode 100644 index 000000000..7d62e4e2f --- /dev/null +++ b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3665", + "tangency-labs/solidcraft#3666" + ], + "what": "a join extrude of a column standing on a channel's flat floor and lying along both its curved walls (column circle tangent to both walls)", + "source": "analytic", + "method": "housing 60x60x20 = 72000 minus the annular channel r16..24, 10 deep: pi(24^2-16^2)*10; the column r=4 centred on the channel's mid circle (r=20) is tangent to both walls and stands 6 mm on the floor: + pi*16*6. V = 72000 - 3200pi + 96pi", + "body_count": 1, + "volume_mm3": 62248.4964 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/recipe.json b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/recipe.json new file mode 100644 index 000000000..9609c813a --- /dev/null +++ b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/recipe.json @@ -0,0 +1,129 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + -30, + -30, + 0 + ], + "length": 60, + "width": 60, + "height": 20, + "body_name": "Housing" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 20 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 24 + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 16 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "profiles": [ + { + "point": [ + 20, + 0 + ] + } + ], + "distance": 10, + "direction": "negative", + "operation": "cut", + "targets": [ + "Housing" + ] + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 10 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 20, + 0 + ], + "radius": 4 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 6, + "operation": "join", + "targets": [ + "Housing" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/expected.json b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/expected.json new file mode 100644 index 000000000..58a19b18b --- /dev/null +++ b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3671" + ], + "what": "intersect with a tapered pocket tool whose top face lies in the block's top face, 0.5 mm short of a rib", + "source": "analytic", + "method": "the tool lies wholly inside the block (z 5..20, x 40..89.5, y 30..70), so the intersection is the tool: a frustum of a rectangle 49.5x40 at the top, sides leaning in 30 deg over 15 mm (inset d=15*tan30=8.660 per side); prismatoid V = h/3 (A1 + A2 + sqrt(A1 A2)). The PR quotes 19573.6090 for its own numbers; 30 deg exactly gives this value (within 1e-3 of it). Nothing may stay above z=20 (the rib is not part of the tool)", + "body_count": 1, + "volume_mm3": 19559.5484, + "bbox": { + "min": [ + 40, + 30, + 5 + ], + "max": [ + 89.5, + 70, + 20 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/recipe.json b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/recipe.json new file mode 100644 index 000000000..233fc1d98 --- /dev/null +++ b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/recipe.json @@ -0,0 +1,93 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + 0 + ], + "length": 200, + "width": 100, + "height": 20, + "body_name": "Block" + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + 90, + 0, + 20 + ], + "length": 20, + "width": 100, + "height": 10, + "operation": "join", + "targets": [ + "Block" + ] + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 5 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 48.66025403784438, + 38.66025403784438 + ], + "p1": [ + 80.83974596215562, + 61.33974596215562 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 15, + "taper": "30 deg", + "operation": "new", + "body_name": "Tool" + } + }, + { + "command": "solid.combine", + "params": { + "target": "Block", + "tools": [ + "Tool" + ], + "operation": "intersect" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/expected.json b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/expected.json new file mode 100644 index 000000000..456b70894 --- /dev/null +++ b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3703" + ], + "what": "two joined face extrudes on one box (top face, then the right side face): the stepped shape must stay", + "source": "analytic", + "method": "box 25x20x35 = 17500; top face pulled up 10: +25*20*10 = 5000; the right face x=25 is then one planar face 20 wide and 45 tall (box side merged with the new block's side) and is pulled out 10: +20*45*10 = 9000. V = 31500, bbox x 0..35, z 0..45. (Assumes coplanar faces merge, as the README's face counts do.)", + "body_count": 1, + "volume_mm3": 31500.0, + "bbox": { + "min": [ + 0, + 0, + 0 + ], + "max": [ + 35, + 20, + 45 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/recipe.json b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/recipe.json new file mode 100644 index 000000000..b221dd308 --- /dev/null +++ b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/recipe.json @@ -0,0 +1,46 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 0, + 0, + 0 + ], + "length": 25, + "width": 20, + "height": 35, + "body_name": "Body1" + } + }, + { + "command": "solid.extrude", + "params": { + "face": [ + 8.5, + 10, + 35 + ], + "face_body": "Body1", + "distance": 10, + "direction": "positive", + "operation": "join" + } + }, + { + "command": "solid.extrude", + "params": { + "face": [ + 25, + 12.07, + 19.2 + ], + "face_body": "Body1", + "distance": 10, + "direction": "positive", + "operation": "join" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/expected.json b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/expected.json new file mode 100644 index 000000000..ab9f1f521 --- /dev/null +++ b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/expected.json @@ -0,0 +1,22 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3729" + ], + "what": "extrude `to` a point lying exactly on the top edge of a step: must end at the plane z=20 through the point", + "source": "analytic", + "method": "block 20x20x10 = 4000, step 10x10x10 = 1000 (z 10..20), column r=1.5 from the block's top z=10 up to the plane z=20 through `to`: pi*1.5^2*10 = 70.686. V = 5070.686, top at z=20 (the kernel went to z=22.73)", + "body_count": 1, + "volume_mm3": 5070.6858, + "bbox": { + "min": [ + -10, + -10, + 0 + ], + "max": [ + 10, + 10, + 20 + ] + } +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/recipe.json b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/recipe.json new file mode 100644 index 000000000..b26f535e1 --- /dev/null +++ b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/recipe.json @@ -0,0 +1,245 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "A" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -10, + -10 + ], + [ + 10, + -10 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 10, + -10 + ], + [ + 10, + 10 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 10, + 10 + ], + [ + -10, + 10 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -10, + 10 + ], + [ + -10, + -10 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 10, + "direction": "positive", + "profiles": "all" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 10 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "B" + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -5, + -5 + ], + [ + 5, + -5 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 5, + -5 + ], + [ + 5, + 5 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + 5, + 5 + ], + [ + -5, + 5 + ] + ] + } + }, + { + "command": "sketch.line", + "params": { + "points": [ + [ + -5, + 5 + ], + [ + -5, + -5 + ] + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 10, + "direction": "positive", + "operation": "join", + "profiles": "all" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 10 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + }, + "name": "C" + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 8, + 0 + ], + "radius": 1.5 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "to": [ + 5, + 0, + 20 + ], + "direction": "positive", + "operation": "join", + "profiles": "all" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/expected.json b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/expected.json new file mode 100644 index 000000000..620853585 --- /dev/null +++ b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3782", + "tangency-labs/solidcraft#3425" + ], + "what": "emboss on a cylinder with the face pick on the half of the wall opposite the sketch", + "source": "invariants", + "method": "the cylinder wall is one logical face, so a pick anywhere on it (between the caps) must be accepted: the emboss succeeds with one valid closed solid. No volume is graded (the badge's shape on a curved wall is not fixed by the issue)", + "body_count": 1 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/recipe.json b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/recipe.json new file mode 100644 index 000000000..bb6a56339 --- /dev/null +++ b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/recipe.json @@ -0,0 +1,65 @@ +{ + "commands": [ + { + "command": "solid.cylinder", + "params": { + "radius": 10, + "height": 20, + "body_name": "Cyl" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 10, + 0 + ], + "x_dir": [ + -1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + 1 + ] + }, + "name": "Badge" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -2, + 5 + ], + "p1": [ + 2, + 10 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.emboss", + "params": { + "sketch": "Badge", + "depth": 1, + "mode": "emboss", + "face": [ + 0, + -10, + 7.5 + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/expected.json b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/expected.json new file mode 100644 index 000000000..603a94c84 --- /dev/null +++ b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/expected.json @@ -0,0 +1,14 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3816" + ], + "what": "circular pattern of a body about an axis {origin,dir} that does not pass through the world origin", + "source": "analytic", + "method": "a 4x4x4 box centred at (39.5,15,-48), 22 mm from the vertical axis through (17.5,15,-48); nine copies 40 deg apart (chord 15 mm > the box diagonal 5.7, no overlap): V = 9*64 = 576. By the 9-fold symmetry the centre of mass lies on the axis: (17.5, 15, -48)", + "volume_mm3": 576.0, + "center_of_mass": [ + 17.5, + 15.0, + -48.0 + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/recipe.json b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/recipe.json new file mode 100644 index 000000000..b2f707bee --- /dev/null +++ b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/recipe.json @@ -0,0 +1,40 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + 37.5, + 13, + -50 + ], + "length": 4, + "width": 4, + "height": 4, + "body_name": "Part" + } + }, + { + "command": "solid.pattern.circular", + "params": { + "bodies": [ + "Part" + ], + "axis": { + "origin": [ + 17.5, + 15, + -48 + ], + "dir": [ + 0, + 0, + 1 + ] + }, + "count": 9, + "angle": "360 deg" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/expected.json b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/expected.json new file mode 100644 index 000000000..c77c9cb0a --- /dev/null +++ b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3830" + ], + "what": "split a thin-walled cup (shell of a d30 cylinder) with a surface body: an extruded spline surface, extended at both ends", + "source": "analytic", + "method": "cup = cylinder r15 h30 shelled 1 mm inward with its top removed: V = pi*15^2*30 - pi*14^2*29 = 3349.04. The surface crosses the whole cup from above its rim to below its floor, so it splits the cup in two; splitting only divides material: two valid bodies whose volumes add up to 3349.04", + "body_count": 2, + "volume_mm3": 3348.938 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/recipe.json b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/recipe.json new file mode 100644 index 000000000..3049ad63f --- /dev/null +++ b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/recipe.json @@ -0,0 +1,154 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 15 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 30, + "operation": "new", + "body_name": "Body1" + } + }, + { + "command": "solid.shell", + "params": { + "faces": [ + [ + -4.2209, + -6.6007, + 30 + ] + ], + "thickness": 1, + "tangent_chain": true, + "body": "Body1" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "YZ", + "name": "Cut" + } + }, + { + "command": "sketch.spline.fit_point", + "params": { + "points": [ + [ + -15.2, + 30 + ], + [ + 3.6, + 19 + ], + [ + 15, + 0.1 + ], + [ + 15.345826150212766, + -0.4420637743548844 + ] + ], + "ids": [ + "s1" + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "surface.extrude", + "params": { + "sketch": "Cut", + "curves": [ + "s1" + ], + "distance": 30, + "direction": "symmetric", + "body_name": "Body2" + } + }, + { + "command": "surface.extend", + "params": { + "body": "Body2", + "edges": [ + [ + 0, + -15.2, + 30 + ] + ], + "distance": 10 + } + }, + { + "command": "surface.extend", + "params": { + "body": "Body2", + "edges": [ + [ + 0, + 15.345826150212766, + -0.4420637743548844 + ] + ], + "distance": 10 + } + }, + { + "command": "solid.split_body", + "params": { + "body": "Body1", + "tool": { + "body": "Body2", + "point": [ + 21.94918088438493, + 17.139934956546313, + -3.829146796035829 + ] + } + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/expected.json b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/expected.json new file mode 100644 index 000000000..8ac28b9e8 --- /dev/null +++ b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3841", + "tangency-labs/solidcraft#168" + ], + "what": "Join of a ring (r10..15) onto a coin (r10) that touch only along a circle: no fusion that moves the ring", + "source": "invariants", + "outcome": "refused", + "method": "the bodies share one circular edge and no area, so a join has no valid solid to give: the right answer is a clean refusal (New Body gives two independent solids). Succeeding means the kernel moved or rotated the ring to fuse it" +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/recipe.json b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/recipe.json new file mode 100644 index 000000000..d4f704ab5 --- /dev/null +++ b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/recipe.json @@ -0,0 +1,112 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 10 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 3, + "operation": "new", + "body_name": "Coin" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 3 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 10 + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 15 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "profiles": [ + { + "point": [ + 12, + 0 + ] + } + ], + "distance": 3, + "operation": "join", + "targets": [ + "Coin" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/expected.json b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/expected.json new file mode 100644 index 000000000..82f44405a --- /dev/null +++ b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3887", + "tangency-labs/solidcraft#2844" + ], + "what": "a ring (r19.6/20.8, 20 tall) joined onto an 80x80x1.2 plate with a 9x9 grid of 6.4 mm square holes; the ring's foot crosses the holes", + "source": "analytic", + "method": "plate 80x80x1.2 minus 81 holes 6.4x6.4 (pitch 8, centred): 7680 - 81*6.4^2*1.2; ring standing on the top face (touching, no overlap): pi(20.8^2-19.6^2)*20. One body. The ring's walls must stay whole cylinder faces (the old kernel cut them into full-height strips at every hole edge); the total face count is not graded because the ring's foot over the holes is not worked out here", + "body_count": 1, + "volume_mm3": 6744.7762 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/recipe.json b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/recipe.json new file mode 100644 index 000000000..557b966c4 --- /dev/null +++ b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/recipe.json @@ -0,0 +1,1176 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -40, + -40 + ], + "p1": [ + 40, + 40 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + -35.2 + ], + "p1": [ + -28.8, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + -27.2 + ], + "p1": [ + -28.8, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + -19.2 + ], + "p1": [ + -28.8, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + -11.2 + ], + "p1": [ + -28.8, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + -3.2 + ], + "p1": [ + -28.8, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + 4.8 + ], + "p1": [ + -28.8, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + 12.8 + ], + "p1": [ + -28.8, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + 20.8 + ], + "p1": [ + -28.8, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -35.2, + 28.8 + ], + "p1": [ + -28.8, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + -35.2 + ], + "p1": [ + -20.8, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + -27.2 + ], + "p1": [ + -20.8, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + -19.2 + ], + "p1": [ + -20.8, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + -11.2 + ], + "p1": [ + -20.8, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + -3.2 + ], + "p1": [ + -20.8, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + 4.8 + ], + "p1": [ + -20.8, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + 12.8 + ], + "p1": [ + -20.8, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + 20.8 + ], + "p1": [ + -20.8, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -27.2, + 28.8 + ], + "p1": [ + -20.8, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + -35.2 + ], + "p1": [ + -12.8, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + -27.2 + ], + "p1": [ + -12.8, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + -19.2 + ], + "p1": [ + -12.8, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + -11.2 + ], + "p1": [ + -12.8, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + -3.2 + ], + "p1": [ + -12.8, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + 4.8 + ], + "p1": [ + -12.8, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + 12.8 + ], + "p1": [ + -12.8, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + 20.8 + ], + "p1": [ + -12.8, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -19.2, + 28.8 + ], + "p1": [ + -12.8, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + -35.2 + ], + "p1": [ + -4.8, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + -27.2 + ], + "p1": [ + -4.8, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + -19.2 + ], + "p1": [ + -4.8, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + -11.2 + ], + "p1": [ + -4.8, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + -3.2 + ], + "p1": [ + -4.8, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + 4.8 + ], + "p1": [ + -4.8, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + 12.8 + ], + "p1": [ + -4.8, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + 20.8 + ], + "p1": [ + -4.8, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -11.2, + 28.8 + ], + "p1": [ + -4.8, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + -35.2 + ], + "p1": [ + 3.2, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + -27.2 + ], + "p1": [ + 3.2, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + -19.2 + ], + "p1": [ + 3.2, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + -11.2 + ], + "p1": [ + 3.2, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + -3.2 + ], + "p1": [ + 3.2, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + 4.8 + ], + "p1": [ + 3.2, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + 12.8 + ], + "p1": [ + 3.2, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + 20.8 + ], + "p1": [ + 3.2, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -3.2, + 28.8 + ], + "p1": [ + 3.2, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + -35.2 + ], + "p1": [ + 11.2, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + -27.2 + ], + "p1": [ + 11.2, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + -19.2 + ], + "p1": [ + 11.2, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + -11.2 + ], + "p1": [ + 11.2, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + -3.2 + ], + "p1": [ + 11.2, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + 4.8 + ], + "p1": [ + 11.2, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + 12.8 + ], + "p1": [ + 11.2, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + 20.8 + ], + "p1": [ + 11.2, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 4.8, + 28.8 + ], + "p1": [ + 11.2, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + -35.2 + ], + "p1": [ + 19.2, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + -27.2 + ], + "p1": [ + 19.2, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + -19.2 + ], + "p1": [ + 19.2, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + -11.2 + ], + "p1": [ + 19.2, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + -3.2 + ], + "p1": [ + 19.2, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + 4.8 + ], + "p1": [ + 19.2, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + 12.8 + ], + "p1": [ + 19.2, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + 20.8 + ], + "p1": [ + 19.2, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12.8, + 28.8 + ], + "p1": [ + 19.2, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + -35.2 + ], + "p1": [ + 27.2, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + -27.2 + ], + "p1": [ + 27.2, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + -19.2 + ], + "p1": [ + 27.2, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + -11.2 + ], + "p1": [ + 27.2, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + -3.2 + ], + "p1": [ + 27.2, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + 4.8 + ], + "p1": [ + 27.2, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + 12.8 + ], + "p1": [ + 27.2, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + 20.8 + ], + "p1": [ + 27.2, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 20.8, + 28.8 + ], + "p1": [ + 27.2, + 35.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + -35.2 + ], + "p1": [ + 35.2, + -28.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + -27.2 + ], + "p1": [ + 35.2, + -20.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + -19.2 + ], + "p1": [ + 35.2, + -12.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + -11.2 + ], + "p1": [ + 35.2, + -4.8 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + -3.2 + ], + "p1": [ + 35.2, + 3.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + 4.8 + ], + "p1": [ + 35.2, + 11.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + 12.8 + ], + "p1": [ + 35.2, + 19.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + 20.8 + ], + "p1": [ + 35.2, + 27.2 + ] + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 28.8, + 28.8 + ], + "p1": [ + 35.2, + 35.2 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "profiles": [ + { + "point": [ + 4, + 4 + ] + } + ], + "distance": 1.2, + "operation": "new", + "body_name": "Plate" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 1.2 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 20.8 + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 19.6 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "profiles": [ + { + "point": [ + 20.2, + 0 + ] + } + ], + "distance": 20, + "operation": "join", + "targets": [ + "Plate" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/expected.json b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/expected.json new file mode 100644 index 000000000..fa0fdc123 --- /dev/null +++ b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#3968" + ], + "what": "a hole of diameter 10 drilled into the top of a truncated cone whose top is also diameter 10 (the hole wall meets the cone at the top rim)", + "source": "analytic", + "method": "truncated cone r=15 at the base, r=5 at z=20: V = pi*20/3*(15^2+15*5+5^2) = 6806.78; the flat-bottomed hole r=5, 10 deep from the top lies inside the cone (the cone is wider below z=20): minus pi*25*10 = 785.40. V = 6021.38. Faces: base, cone, hole wall, hole floor = 4", + "body_count": 1, + "volume_mm3": 6021.3859, + "faces": 4 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/recipe.json b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/recipe.json new file mode 100644 index 000000000..0f7ba975f --- /dev/null +++ b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/recipe.json @@ -0,0 +1,62 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 0 + ], + "radius": 15 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 20, + "taper": "-26.565051177 deg", + "operation": "new", + "body_name": "Mountain" + } + }, + { + "command": "solid.hole", + "params": { + "position": [ + 0, + 0, + 20 + ], + "diameter": 10, + "depth": 10, + "type": "simple" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/expected.json b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/expected.json new file mode 100644 index 000000000..1823999a9 --- /dev/null +++ b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4008" + ], + "what": "symmetric 180 deg revolve cut about a vertical edge of a block, the tool's end faces lying in the block's side face", + "source": "analytic", + "method": "block 60x20x25; the tool (rectangle 2.6..9.6 from the axis, 21 tall) turned +-90 deg about the block's back-left vertical edge; only the quarter inside the block (x>0, y<20) is material: V = 60*20*25 - pi(9.6^2-2.6^2)*21/4", + "body_count": 1, + "volume_mm3": 28591.4669 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/recipe.json b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/recipe.json new file mode 100644 index 000000000..c52200a73 --- /dev/null +++ b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/recipe.json @@ -0,0 +1,109 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 60, + 20 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 25, + "operation": "new" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 20, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 0, + -1 + ] + } + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 2.6, + -23 + ], + "p1": [ + 9.6, + -2 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.revolve", + "params": { + "axis": { + "origin": [ + 0, + 20, + 0 + ], + "dir": [ + 0, + 0, + 1 + ] + }, + "angle": "180 deg", + "operation": "cut", + "direction": "symmetric" + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/expected.json b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/expected.json new file mode 100644 index 000000000..5a3201277 --- /dev/null +++ b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4011" + ], + "what": "a blind hole mirrored to a spot where half its top disc lies under a wall's foot", + "source": "analytic", + "method": "plate 100x60x10 (6000+... =60000) plus wall 10x60x10 (6000) = 66000. Each blind hole r=3, 4 deep from z=5 removes pi*9*4 = 113.097 from the plate only (the wall is above z=5, untouched); two holes: V = 66000 - 2*pi*9*4", + "body_count": 1, + "volume_mm3": 65773.8053 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/recipe.json b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/recipe.json new file mode 100644 index 000000000..84415e436 --- /dev/null +++ b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/recipe.json @@ -0,0 +1,161 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 0 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + -50, + -30 + ], + "p1": [ + 50, + 30 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 10, + "operation": "new", + "direction": "symmetric" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 5 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 10, + -30 + ], + "p1": [ + 20, + 30 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 10, + "operation": "join" + } + }, + { + "command": "sketch.create", + "params": { + "plane": { + "origin": [ + 0, + 0, + 5 + ], + "x_dir": [ + 1, + 0, + 0 + ], + "y_dir": [ + 0, + 1, + 0 + ] + } + } + }, + { + "command": "sketch.circle.center", + "params": { + "center": [ + 0, + 10 + ], + "radius": 3 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "distance": 4, + "operation": "cut", + "direction": "negative" + } + }, + { + "command": "solid.mirror", + "params": { + "features": [ + "Extrude3" + ], + "plane": { + "origin": [ + 10, + 0, + 0 + ], + "normal": [ + 1, + 0, + 0 + ] + } + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/expected.json b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/expected.json new file mode 100644 index 000000000..83242c8d3 --- /dev/null +++ b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/expected.json @@ -0,0 +1,11 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4058", + "tangency-labs/solidcraft#4059" + ], + "what": "a 10 mm ring (rounded corners) extruded 40 mm as a Join round a floor's outline: it touches the floor back to back on its flat sides and rounded corners", + "source": "analytic", + "method": "floor 60x50 with r4 corners, 3.25 thick: (3000-(4-pi)*16)*3.25; minus the pocket 40x30 (r3 corners), 2.25 deep, walls leaning in 15 deg (integral of (40-2d)(30-2d)-(4-pi)(3-d)^2 with d=t*tan15, t=0..2.25); plus the socket 36x26x4.75: 11559.35 (the PR measures 11559.34). Ring area (80*70-(4-pi)*14^2)-(60*50-(4-pi)*4^2) = 2445.487, times 40 = 97819.467. The ring only touches the floor, so V = floor + ring. One solid", + "body_count": 1, + "volume_mm3": 109378.817 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/recipe.json b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/recipe.json new file mode 100644 index 000000000..f6128a45b --- /dev/null +++ b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/recipe.json @@ -0,0 +1,153 @@ +{ + "commands": [ + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Outline" + } + }, + { + "command": "sketch.rectangle.rounded", + "params": { + "p0": [ + 0, + 0 + ], + "p1": [ + 60, + 50 + ], + "radius": 4 + } + }, + { + "command": "sketch.rectangle.rounded", + "params": { + "p0": [ + -10, + -10 + ], + "p1": [ + 70, + 60 + ], + "radius": 14 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Outline", + "profiles": [ + { + "point": [ + 30, + 25 + ] + } + ], + "distance": 3.25, + "body_name": "Floor" + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "offset": 3.25, + "name": "Pocket" + } + }, + { + "command": "sketch.rectangle.rounded", + "params": { + "p0": [ + 10, + 10 + ], + "p1": [ + 50, + 40 + ], + "radius": 3 + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Pocket", + "distance": 2.25, + "direction": "negative", + "taper": "-15 deg", + "operation": "cut", + "targets": [ + "Floor" + ] + } + }, + { + "command": "sketch.create", + "params": { + "plane": "XY", + "name": "Socket" + } + }, + { + "command": "sketch.rectangle.two_point", + "params": { + "p0": [ + 12, + 12 + ], + "p1": [ + 48, + 38 + ] + } + }, + { + "command": "sketch.finish", + "params": {} + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Socket", + "distance": 4.75, + "direction": "negative", + "operation": "join", + "targets": [ + "Floor" + ] + } + }, + { + "command": "solid.extrude", + "params": { + "sketch": "Outline", + "profiles": [ + { + "point": [ + -5, + 25 + ] + } + ], + "distance": 40, + "operation": "join", + "targets": [ + "Floor" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/expected.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/expected.json new file mode 100644 index 000000000..177741c0f --- /dev/null +++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4095" + ], + "what": "a slab cut whose +x face stands 6.73e-05 mm (0.90 x the coincidence tolerance 7.48e-05) off a through-bore's wall (R=10), beside the bore", + "source": "analytic", + "method": "plate 60x40x20 minus the bore pi R^2*20 minus the notch (the slab 6x16 from z=12 up through the top z=20: 6*16*8 = 768), which the bore beside it does not change. V = 60*40*20 - pi*10^2*20 - 768. The bug removed about 5% too much with no warning", + "body_count": 1, + "volume_mm3": 40948.8147 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/recipe.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/recipe.json new file mode 100644 index 000000000..b84e5e07f --- /dev/null +++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/recipe.json @@ -0,0 +1,51 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + -30.0, + -20.0, + 0 + ], + "length": 60, + "width": 40, + "height": 20, + "body_name": "Plate" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 10, + "height": 22, + "base": [ + 0, + 0, + -1 + ], + "operation": "cut", + "targets": [ + "Plate" + ] + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + -16.0000673497, + -8, + 12 + ], + "length": 6, + "width": 16, + "height": 14, + "operation": "cut", + "targets": [ + "Plate" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json new file mode 100644 index 000000000..31ff60216 --- /dev/null +++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json @@ -0,0 +1,10 @@ +{ + "sources": [ + "tangency-labs/solidcraft#4095" + ], + "what": "a slab cut whose +x face stands 6.60e-05 mm (0.60 x the coincidence tolerance 1.10e-04) off a through-bore's wall (R=15), beside the bore", + "source": "analytic", + "method": "plate 90x60x20 minus the bore pi R^2*20 minus the notch (the slab 6x16 from z=12 up through the top z=20: 6*16*8 = 768), which the bore beside it does not change. V = 90*60*20 - pi*15^2*20 - 768. The bug removed about 5% too much with no warning", + "body_count": 1, + "volume_mm3": 93094.8331 +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json new file mode 100644 index 000000000..723c9275f --- /dev/null +++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json @@ -0,0 +1,51 @@ +{ + "commands": [ + { + "command": "solid.box", + "params": { + "corner": [ + -45.0, + -30.0, + 0 + ], + "length": 90, + "width": 60, + "height": 20, + "body_name": "Plate" + } + }, + { + "command": "solid.cylinder", + "params": { + "radius": 15, + "height": 22, + "base": [ + 0, + 0, + -1 + ], + "operation": "cut", + "targets": [ + "Plate" + ] + } + }, + { + "command": "solid.box", + "params": { + "corner": [ + -21.000066, + -8, + 12 + ], + "length": 6, + "width": 16, + "height": 14, + "operation": "cut", + "targets": [ + "Plate" + ] + } + } + ] +} \ No newline at end of file diff --git a/tests/kernel-cases/booleans/skipped-c.json b/tests/kernel-cases/booleans/skipped-c.json new file mode 100644 index 000000000..f6e080a0c --- /dev/null +++ b/tests/kernel-cases/booleans/skipped-c.json @@ -0,0 +1,306 @@ +[ + { + "source": "tangency-labs/solidcraft#3404", + "why": "needs a user's design (plate with a tab profile) that can't be rebuilt: the report names only the failing join extrude" + }, + { + "source": "tangency-labs/solidcraft#3405", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3406", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)" + }, + { + "source": "tangency-labs/solidcraft#3411", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of three bodies, 'Union: no result')" + }, + { + "source": "tangency-labs/solidcraft#3426", + "why": "UI only: the extrude preview's initial direction on a picked face, no wrong geometry" + }, + { + "source": "tangency-labs/solidcraft#3427", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3428", + "why": "other area: crashes (kernel panic in a cut with an imported STEP bolt; the STEP file is from a parts library and can't be rebuilt)" + }, + { + "source": "tangency-labs/solidcraft#3448", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude of two profiles, 'Union: no result', cylinders)" + }, + { + "source": "tangency-labs/solidcraft#3479", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (rectangular pattern of a chamfer and an extrude: 'no edge near ...')" + }, + { + "source": "tangency-labs/solidcraft#3496", + "why": "other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')" + }, + { + "source": "tangency-labs/solidcraft#3498", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)" + }, + { + "source": "tangency-labs/solidcraft#3514", + "why": "other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)" + }, + { + "source": "tangency-labs/solidcraft#3518", + "why": "other area: shell (split of a user's body by a plane, 'Intersect: no result')" + }, + { + "source": "tangency-labs/solidcraft#3531", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3539", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (thin extrude of a curve, join)" + }, + { + "source": "tangency-labs/solidcraft#3547", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (cut through an extruded spline)" + }, + { + "source": "tangency-labs/solidcraft#3563", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3578", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of a revolve with a chamfered box: the description is too vague to rebuild)" + }, + { + "source": "tangency-labs/solidcraft#3586", + "why": "other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)" + }, + { + "source": "tangency-labs/solidcraft#3598", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (a fake edge left after an extrude chain on a chamfer)" + }, + { + "source": "tangency-labs/solidcraft#3602", + "why": "other area: shell (split of a user's body by a plane, 'Intersect: no result')" + }, + { + "source": "tangency-labs/solidcraft#3607", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3608", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (circular pattern of an extrude feature, cut 'no result')" + }, + { + "source": "tangency-labs/solidcraft#3632", + "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#3634", + "why": "UI only: hole tool auto-switching to multi-hole mode" + }, + { + "source": "tangency-labs/solidcraft#3645", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3648", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3649", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude refusing for zero-thickness edge contact; the contact is not described, see #3841 for the circular-edge case)" + }, + { + "source": "tangency-labs/solidcraft#3656", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3657", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3667", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3680", + "why": "other area: sheet metal (a hole in sheet-metal material is refused)" + }, + { + "source": "tangency-labs/solidcraft#3707", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3709", + "why": "no geometry: a video of cutting a bolt in another CAD tool, no model or command" + }, + { + "source": "tangency-labs/solidcraft#3725", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3727", + "why": "UI only: sketch.pattern.circular was run with no sketch being edited" + }, + { + "source": "tangency-labs/solidcraft#3732", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (French report: Combine cut keeping the tool gives nothing, parts are named Equerre and Rallonge2)" + }, + { + "source": "tangency-labs/solidcraft#3734", + "why": "not geometry: the failing step is a profile that is not closed in the user's sketch" + }, + { + "source": "tangency-labs/solidcraft#3741", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)" + }, + { + "source": "tangency-labs/solidcraft#3753", + "why": "other area: fillets (a chamfer inside a circular pattern is too large for the edge, 'grow the part'; the pattern itself is not at fault)" + }, + { + "source": "tangency-labs/solidcraft#3757", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)" + }, + { + "source": "tangency-labs/solidcraft#3767", + "why": "not geometry: a face lineage refusal ('no supported stable semantic lineage') on a user's body" + }, + { + "source": "tangency-labs/solidcraft#3777", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3785", + "why": "not geometry: feature request (pattern along a closed path around a rounded rectangle)" + }, + { + "source": "tangency-labs/solidcraft#3787", + "why": "other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')" + }, + { + "source": "tangency-labs/solidcraft#3789", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3791", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3793", + "why": "no geometry: a screenshot only, the report gives no command or model" + }, + { + "source": "tangency-labs/solidcraft#3803", + "why": "other area: UI only (pattern of a sketch feature is not offered: 'Sketch2 cannot be patterned')" + }, + { + "source": "tangency-labs/solidcraft#3808", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)" + }, + { + "source": "tangency-labs/solidcraft#3811", + "why": "UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})" + }, + { + "source": "tangency-labs/solidcraft#3823", + "why": "not geometry: an expression error (`e` is not a parameter)" + }, + { + "source": "tangency-labs/solidcraft#3824", + "why": "other area: threads (a threaded hole needs a cylindrical face: 'no cylindrical face there to thread')" + }, + { + "source": "tangency-labs/solidcraft#3843", + "why": "UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})" + }, + { + "source": "tangency-labs/solidcraft#3844", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (holes of an extrude cut, `flange_thickenss` parameter, not visible in the final result)" + }, + { + "source": "tangency-labs/solidcraft#3865", + "why": "UI only: shift-click multiple selection in the Combine dialog" + }, + { + "source": "tangency-labs/solidcraft#3866", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)" + }, + { + "source": "tangency-labs/solidcraft#3869", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)" + }, + { + "source": "tangency-labs/solidcraft#3879", + "why": "other area: import (the extrude acts on an imported object's orientation / a STEP file's face)" + }, + { + "source": "tangency-labs/solidcraft#3904", + "why": "UI only: selecting several non-coplanar profiles in Extrude (which profiles the dialog accepts), no wrong geometry" + }, + { + "source": "tangency-labs/solidcraft#3926", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut from a face of a user's body)" + }, + { + "source": "tangency-labs/solidcraft#3932", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3948", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#3961", + "why": "UI only: should hidden bodies be left out of a cut: a visibility policy, the cut itself is right" + }, + { + "source": "tangency-labs/solidcraft#3975", + "why": "not geometry: feature request (rework of the hole tool's positioning)" + }, + { + "source": "tangency-labs/solidcraft#3978", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#4017", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#4036", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#4041", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut 'up to' another body: 'nothing lies between the profile and the To object')" + }, + { + "source": "tangency-labs/solidcraft#4042", + "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#4070", + "why": "not geometry: hole not created, the report gives only the sketch point id" + }, + { + "source": "tangency-labs/solidcraft#4075", + "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" + }, + { + "source": "tangency-labs/solidcraft#4077", + "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry" + }, + { + "source": "tangency-labs/solidcraft#4098", + "why": "not geometry: documentation of the taper sign (a positive taper makes the walls lean outward); the behaviour is not wrong" + }, + { + "source": "tangency-labs/solidcraft#4111", + "why": "UI only: Press/Pull opens Extrude on a selection with no planar face or profile" + }, + { + "source": "tangency-labs/solidcraft#4124", + "why": "other area: import (the extrude acts on an imported object's orientation / a STEP file's face)" + } +] \ No newline at end of file