diff --git a/crates/kernel/src/boundary_network.rs b/crates/kernel/src/boundary_network.rs
index efb35411e..00c48e237 100644
--- a/crates/kernel/src/boundary_network.rs
+++ b/crates/kernel/src/boundary_network.rs
@@ -11,19 +11,16 @@
//! The two-curve bridge with G0–G3 against a sketch's plane is [`crate::boundary`]; this is the
//! general case: three or four sides, interior curves, 3D curves and edges.
-use std::collections::HashSet;
-
-use mt::{BoundedCurve, Cut, InnerSpace, ParametricCurve, ParametricSurface, SearchNearestParameter};
+use solidcraft_geom::brep::Brep;
+use solidcraft_geom::brep::eval::{CurveEval, SurfaceEval};
use solidcraft_geom::bspline::{CurveN, NurbsSurface, SplineError};
use solidcraft_geom::network::{self, CrossFace, FaceFrame, NetCurve, NetworkCurve, PointCurve, Tolerances};
use solidcraft_geom::{Plane, Seg2, Vec3};
-use truck_modeling as mt;
-use crate::body::{Body, from_p3, p3};
+use crate::body::Body;
use crate::bridge::Continuity;
-use crate::plane_fit::EdgeSampler;
-use crate::record::Rebuild;
-use crate::{KernelError, Result, guard};
+use crate::surfaces::{Chain, Parts, spline_curve, spline_surface, surface_body, uv_line};
+use crate::{KernelError, Result};
/// How far apart curves of the two directions may pass and still cross (mm).
pub const CROSS_TOLERANCE: f64 = 0.01;
@@ -79,7 +76,7 @@ pub fn boundary_surface(u: &[BoundaryCurve], v: &[BoundaryCurve]) -> Result
= Vec::new();
let mut to_net = |c: &BoundaryCurve| -> Result> {
let (curve, face): (Box, Option) = match &c.source {
@@ -101,12 +98,18 @@ pub fn boundary_surface(u: &[BoundaryCurve], v: &[BoundaryCurve]) -> Result None,
_ => Some(EdgeFaces::new(&c.label, body, &chain)?),
};
- (Box::new(EdgeChain::new(&c.label, &chain)?), face)
+ (Box::new(EdgeChain::new(&c.label, r, &chain)?), face)
}
};
if c.continuity != Continuity::G0 && face.is_none() {
@@ -122,20 +125,16 @@ pub fn boundary_surface(u: &[BoundaryCurve], v: &[BoundaryCurve]) -> Result KernelError::TooLarge(m),
SplineError::Invalid(m) => KernelError::Invalid(m),
})?;
- let face = face_of(&surface, &corners)?;
- let mut rec = Rebuild::default();
- rec.made(&face, Vec::new());
- crate::surfaces::body_of(vec![face], &[], &rec)
- })
+ face_of(&surface, &corners)
+ }
}
/// `made` (a boundary surface) sewn into `target` along the edges they share: one body, a solid
/// when it closes the gap. Refused when they share no edge.
pub fn boundary_join(target: &Body, made: &Body) -> Result {
target.require_brep("join")?;
- let edges = |b: &Body| b.solid.edge_iter().map(|e| e.id()).collect::>().len();
let joined = crate::surfaces::stitch(&[target, made], CROSS_TOLERANCE)?;
- if edges(&joined) == edges(target) + edges(made) {
+ if joined.edge_count() == target.edge_count() + made.edge_count() {
return Err(KernelError::Invalid("the surface shares no edge with the body it joins".into()));
}
Ok(joined)
@@ -245,32 +244,42 @@ fn resample(pts: &[Vec3], max: usize) -> Vec {
.collect()
}
-/// A chain of edges (each turned to run along it), by their lengths.
+/// A chain of a body's edges (each walked the way the chain runs along it), by their lengths;
+/// a point a fraction of the way along an edge is at that fraction of its parameter interval.
struct EdgeChain {
- edges: Vec,
+ edges: Vec<(CurveEval, [f64; 2])>,
starts: Vec,
total: f64,
}
+/// The curves of `chain` (edges of `r`), each with its interval in the chain's direction.
+fn chain_curves(label: &str, r: &Brep, chain: &Chain) -> Result> {
+ chain
+ .iter()
+ .map(|&(e, forward)| {
+ let edge = r.edges.get(e).ok_or_else(|| KernelError::Invalid(format!("{label}: an edge reference")))?;
+ let c = CurveEval::new(&edge.curve).map_err(|err| KernelError::Invalid(format!("{label}: {err}")))?;
+ let [t0, t1] = edge.interval;
+ Ok((c, if forward { [t0, t1] } else { [t1, t0] }))
+ })
+ .collect()
+}
+
+/// The point `f` (0…1) of the way along a directed interval of a curve.
+fn along((c, [a, z]): &(CurveEval, [f64; 2]), f: f64) -> Option {
+ c.point(a + (z - a) * f.clamp(0.0, 1.0))
+}
+
impl EdgeChain {
- fn new(label: &str, chain: &[mt::Edge]) -> Result {
- let mut edges = Vec::with_capacity(chain.len());
- let mut starts = Vec::with_capacity(chain.len());
+ fn new(label: &str, r: &Brep, chain: &Chain) -> Result {
+ let edges = chain_curves(label, r, chain)?;
+ let mut starts = Vec::with_capacity(edges.len());
let mut total = 0.0;
- for e in chain {
- let mut s = EdgeSampler::new(e).ok_or_else(|| KernelError::Invalid(format!("{label}: an edge has no parameter range")))?;
- let mut len = 0.0;
- let mut last: Option = None;
- for k in 0..=16 {
- let p = s.at(k as f64 / 16.0).ok_or_else(|| KernelError::Invalid(format!("{label}: an edge can't be evaluated")))?;
- if let Some(q) = last {
- len += p.dist(q);
- }
- last = Some(p);
- }
+ for e in &edges {
+ let pts = (0..=16).map(|k| along(e, k as f64 / 16.0)).collect::>>();
+ let pts = pts.ok_or_else(|| KernelError::Invalid(format!("{label}: an edge can't be evaluated")))?;
starts.push(total);
- total += len;
- edges.push(s);
+ total += pts.windows(2).map(|w| w[0].dist(w[1])).sum::();
}
if !(total > 0.0 && total.is_finite()) {
return Err(KernelError::Invalid(format!("{label} has no length")));
@@ -286,7 +295,7 @@ impl NetCurve for EdgeChain {
let start = *self.starts.get(k)?;
let end = self.starts.get(k + 1).copied().unwrap_or(self.total);
let local = if end > start { ((at - start) / (end - start)).clamp(0.0, 1.0) } else { 0.0 };
- self.edges.get_mut(k)?.at(local)
+ along(self.edges.get(k)?, local)
}
}
@@ -302,29 +311,34 @@ pub(crate) struct EdgeFaces {
/// parameters found last (the next search starts there).
struct EdgeSide {
pts: Vec,
- surface: mt::Surface,
+ surface: SurfaceEval,
along: bool,
- hint: Option<(f64, f64)>,
+ hint: Option<[f64; 2]>,
}
impl EdgeFaces {
- pub(crate) fn new(label: &str, body: &Body, chain: &[mt::Edge]) -> Result {
+ pub(crate) fn new(label: &str, body: &Body, chain: &Chain) -> Result {
+ let r = body.record();
+ let curves = chain_curves(label, r, chain)?;
let mut sides = Vec::with_capacity(chain.len());
- for e in chain {
- let mut faces = body.solid.face_iter().filter(|f| f.boundaries().iter().flatten().any(|x| x.id() == e.id()));
- let (Some(face), None) = (faces.next(), faces.next()) else {
+ for (&(e, forward), curve) in chain.iter().zip(&curves) {
+ let edge = r.edges.get(e).ok_or_else(|| KernelError::Invalid(format!("{label}: an edge reference")))?;
+ let [u] = edge.uses.as_slice() else {
return Err(KernelError::Invalid(format!(
"{label}: G1 and G2 need an open edge of a surface (an edge with a face on one side only)"
)));
};
- // How the face's own (absolute) boundary runs this edge.
- let in_wire = face.absolute_boundaries().iter().flatten().find(|x| x.id() == e.id()).cloned();
- let in_wire = in_wire.ok_or_else(|| KernelError::Failed("boundary surface: an edge's face".into()))?;
- let along = in_wire.front().id() == e.front().id();
- let mut sampler = EdgeSampler::new(e).ok_or_else(|| KernelError::Invalid(format!("{label}: an edge has no parameter range")))?;
- let pts = (0..=16).map(|k| sampler.at(k as f64 / 16.0)).collect::>>();
+ // How the face's loop (counter-clockwise about its surface's natural normal) runs the edge.
+ let face = r.faces.get(u.face as usize).ok_or_else(|| KernelError::Failed("boundary surface: an edge's face".into()))?;
+ let in_loop = match face.loops.get(u.r#loop as usize) {
+ Some(solidcraft_geom::brep::Loop::Edges { edges }) => edges.get(u.position as usize).map(|x| x.forward),
+ _ => None,
+ };
+ let in_loop = in_loop.ok_or_else(|| KernelError::Failed("boundary surface: an edge's face".into()))?;
+ let pts = (0..=16).map(|k| along(curve, k as f64 / 16.0)).collect:: >>();
let pts = pts.ok_or_else(|| KernelError::Invalid(format!("{label}: an edge can't be evaluated")))?;
- sides.push(EdgeSide { pts, surface: face.surface(), along, hint: None });
+ let surface = SurfaceEval::new(&face.surface).map_err(|err| KernelError::Failed(format!("boundary surface: {err}")))?;
+ sides.push(EdgeSide { pts, surface, along: in_loop == forward, hint: None });
}
Ok(EdgeFaces { sides })
}
@@ -339,17 +353,12 @@ impl CrossFace for EdgeFaces {
let seg = side.pts.windows(2).min_by(|a, b| at.dist_to_segment(a[0], a[1]).total_cmp(&at.dist_to_segment(b[0], b[1])))?;
let chain_dir = seg[1] - seg[0];
let s = &side.surface;
- let (u, v) = s.search_nearest_parameter(p3(at), side.hint, 100).or_else(|| s.search_nearest_parameter(p3(at), None, 100))?;
- side.hint = Some((u, v));
- let (su, sv) = (s.uder(u, v), s.vder(u, v));
- let n = su.cross(sv);
- if !(n.magnitude2() > 0.0) {
- return None;
- }
- let n = n.normalize();
- let normal = Vec3::new(n.x, n.y, n.z);
- // The face's boundary runs counter-clockwise about its surface's normal, so the face lies
- // to the left of it: outward is the boundary's direction × the normal.
+ let [u, v] = s.project(at, side.hint, f64::INFINITY).or_else(|| s.project(at, None, f64::INFINITY))?;
+ side.hint = Some([u, v]);
+ let (_, su, sv) = s.derivs(u, v)?;
+ let normal = su.cross(sv).normalized()?;
+ // The face's loop runs counter-clockwise about its surface's normal, so the face lies to
+ // the left of it: outward is the loop's direction × the normal.
let wire = if side.along { chain_dir } else { -chain_dir };
let outward = wire.cross(normal).normalized()?;
// The second fundamental form, in the basis of the tangent asked about and outward.
@@ -363,11 +372,10 @@ impl CrossFace for EdgeFaces {
// II(w, w) = L·α² + 2M·αβ + N·β² for w = α·S_u + β·S_v, with L, M, N the surface's
// second derivatives along its unit normal (do Carmo, §3-3): exact, rational surfaces
// included, and with nothing sampled beyond the edge, where the face's domain ends.
- let nv = mt::Vector3::new(normal.x, normal.y, normal.z);
- let (l, m, nn) = (s.uuder(u, v).dot(nv), s.uvder(u, v).dot(nv), s.vvder(u, v).dot(nv));
+ let (suu, suv, svv) = s.second(u, v)?;
+ let (l, m, nn) = (suu.dot(normal), suv.dot(normal), svv.dot(normal));
let ii = |w: Vec3| -> Option {
- let wv = mt::Vector3::new(w.x, w.y, w.z);
- let (p, q) = (wv.dot(su), wv.dot(sv));
+ let (p, q) = (w.dot(su), w.dot(sv));
let (alpha, beta) = ((p * g - q * f) / det, (q * e - p * f) / det);
let out = l * alpha * alpha + 2.0 * m * alpha * beta + nn * beta * beta;
out.is_finite().then_some(out)
@@ -380,98 +388,125 @@ impl CrossFace for EdgeFaces {
}
/// The face of a network surface: its four sides from the surface's boundary rows, each split
-/// at the `corners` that lie on it (inner vertices of edge chains). Refused when a side shrinks to
-/// a point.
-fn face_of(s: &NurbsSurface, corners: &[Vec3]) -> Result {
+/// at the `corners` that lie on it (inner vertices of edge chains), the pieces edges on the side's
+/// own curve over parts of its interval. A side collapsed to a point (a three-sided patch) is left
+/// out: the two sides beside it meet at one vertex there. Refused when more than one side
+/// shrinks to a point.
+fn face_of(s: &NurbsSurface, corners: &[Vec3]) -> Result {
let fail = |m: &str| KernelError::Failed(format!("boundary surface: {m}"));
let [nu, nv] = s.count();
- let [ku, kv] = s.knots();
- let rows: Vec> = (0..nu).map(|i| (0..nv).map(|j| p3(s.point(i, j).xyz())).collect()).collect();
- let (uk, vk) = (mt::KnotVec::from(ku.clone()), mt::KnotVec::from(kv.clone()));
- let surface = mt::BSplineSurface::try_new((uk.clone(), vk.clone()), rows.clone()).map_err(|e| fail(&e.to_string()))?;
- let row = |pts: Vec, k: &mt::KnotVec| mt::BSplineCurve::try_new(k.clone(), pts).map_err(|e| fail(&e.to_string()));
- let (Some(first), Some(last)) = (rows.first(), rows.last()) else { return Err(fail("control net")) };
- let bottom = row(rows.iter().filter_map(|r| r.first().copied()).collect(), &uk)?;
- let top = row(rows.iter().filter_map(|r| r.last().copied()).collect(), &uk)?;
- let left = row(first.clone(), &vk)?;
- let right = row(last.clone(), &vk)?;
- let corner = |c: &mt::BSplineCurve, end: bool| {
- let (t0, t1) = c.range_tuple();
- c.subs(if end { t1 } else { t0 })
+ if nu < 2 || nv < 2 {
+ return Err(fail("control net"));
+ }
+ let [ku, kv] = s.knots().clone();
+ let [[u0, u1], [v0, v1]] = s.domain();
+ let corner = |i: usize, j: usize| s.point(i, j).project().ok_or_else(|| fail("a corner has no position"));
+ let c = [corner(0, 0)?, corner(nu - 1, 0)?, corner(nu - 1, nv - 1)?, corner(0, nv - 1)?];
+ let size = c.iter().map(|p| p.dist(c[0])).fold(0.0, f64::max).max(1.0);
+ let row = |j: usize| (0..nu).map(|i| s.point(i, j)).collect::>();
+ let column = |i: usize| (0..nv).map(|j| s.point(i, j)).collect::>();
+ // Bottom (v0) and top (v1) along u, left (u0) and right (u1) along v, each from its first
+ // corner to its second; the loop runs bottom, right, top backwards, left backwards.
+ let sides = [
+ (row(0), ku.clone(), [0, 1], true, [None, Some(v0)]),
+ (column(nu - 1), kv.clone(), [1, 2], true, [Some(u1), None]),
+ (row(nv - 1), ku, [3, 2], false, [None, Some(v1)]),
+ (column(0), kv, [0, 3], false, [Some(u0), None]),
+ ];
+ let collapsed: Vec = sides.iter().map(|(_, _, [a, z], ..)| c[*a].dist(c[*z]) <= size * 1e-9).collect();
+ if collapsed.iter().filter(|x| **x).count() > 1 {
+ return Err(KernelError::Invalid("not supported yet: a boundary surface with more than one side shrunk to a point".into()));
+ }
+ // Vertices: the corners, a collapsed side's two ends one vertex.
+ let mut vertex_of = [0usize, 1, 2, 3];
+ for (k, (_, _, [a, z], ..)) in sides.iter().enumerate() {
+ if collapsed.get(k).copied().unwrap_or(false) {
+ vertex_of[*z] = vertex_of[*a];
+ }
+ }
+ let tolerance = (size * 1e-6).max(1e-5);
+ let mut parts = Parts { tolerance, ..Parts::default() };
+ parts.vertices = c.iter().map(|p| solidcraft_geom::brep::Vertex { point: [p.x, p.y, p.z], tolerance }).collect();
+ let mut uses = Vec::new();
+ for (k, (ctrl, knots, [a, z], forward, fixed)) in sides.into_iter().enumerate() {
+ if collapsed.get(k).copied().unwrap_or(false) {
+ continue;
+ }
+ let (curve, [t0, t1]) = spline_curve(&ctrl, knots)?;
+ let eval = CurveEval::new(&curve).map_err(|e| fail(&e.to_string()))?;
+ let cuts = cuts_on(&eval, [t0, t1], corners);
+ let mut breaks = vec![t0];
+ breaks.extend(cuts.iter().map(|(t, _)| *t));
+ breaks.push(t1);
+ let mut ends = vec![vertex_of[a]];
+ for (_, p) in &cuts {
+ ends.push(parts.vertices.len());
+ parts.vertices.push(solidcraft_geom::brep::Vertex { point: [p.x, p.y, p.z], tolerance });
+ }
+ ends.push(vertex_of[z]);
+ let uv = |t: f64| [fixed[0].unwrap_or(t), fixed[1].unwrap_or(t)];
+ let mut pieces = Vec::with_capacity(breaks.len());
+ for (w, e) in breaks.windows(2).zip(ends.windows(2)) {
+ let interval = [w[0], w[1]];
+ let edge = index(parts.edges.len())?;
+ let vertices = [index(e[0])?, index(e[1])?];
+ parts.edges.push(solidcraft_geom::brep::Edge { curve: curve.clone(), interval, vertices, tolerance, uses: Vec::new() });
+ pieces.push(solidcraft_geom::brep::OrientedEdge { edge, forward, pcurve: uv_line(uv(w[0]), uv(w[1]), interval) });
+ }
+ if !forward {
+ pieces.reverse();
+ }
+ uses.extend(pieces);
+ }
+ let face = solidcraft_geom::brep::Face {
+ surface: spline_surface(s),
+ domain: s.domain(),
+ loops: vec![solidcraft_geom::brep::Loop::Edges { edges: uses }],
};
- let (c00, c10, c11, c01) = (corner(&bottom, false), corner(&bottom, true), corner(&top, true), corner(&top, false));
- let size = [c00, c10, c11, c01].iter().map(|p| from_p3(*p).dist(from_p3(c00))).fold(0.0, f64::max).max(1.0);
- // A side collapsed to a point (a three-sided patch) is left out of the loop: the two sides
- // beside it meet at one vertex there.
- let sides = [(c00, c10), (c10, c11), (c01, c11), (c00, c01)];
- let collapsed: Vec = sides.iter().map(|(a, b)| from_p3(*a).dist(from_p3(*b)) <= size * 1e-9).collect();
- match collapsed.iter().filter(|c| **c).count() {
- 0 | 1 => {}
- _ => return Err(KernelError::Invalid("not supported yet: a boundary surface with more than one side shrunk to a point".into())),
- }
- let mut verts: Vec = Vec::with_capacity(4);
- for c in [c00, c10, c11, c01] {
- let same = verts.iter().find(|v| from_p3(v.point()).dist(from_p3(c)) <= size * 1e-9).cloned();
- verts.push(same.unwrap_or_else(|| mt::Vertex::new(c)));
- }
- let (Some(v00), Some(v10), Some(v11), Some(v01)) = (verts.first(), verts.get(1), verts.get(2), verts.get(3)) else {
- return Err(fail("corners"));
- };
- let is = |k: usize| collapsed.get(k).copied().unwrap_or(false);
- let mut wire: Vec = Vec::new();
- if !is(0) {
- wire.extend(side_edges(bottom, v00, v10, corners));
- }
- if !is(1) {
- wire.extend(side_edges(right, v10, v11, corners));
- }
- if !is(2) {
- wire.extend(side_edges(top, v01, v11, corners).into_iter().rev().map(|e| e.inverse()));
- }
- if !is(3) {
- wire.extend(side_edges(left, v00, v01, corners).into_iter().rev().map(|e| e.inverse()));
- }
- // u along the bottom, v up the left: counter-clockwise in (u, v).
- mt::Face::try_new(vec![wire.into()], mt::Surface::BSplineSurface(surface)).map_err(|e| fail(&e.to_string()))
+ parts.faces.push((face, true));
+ let body = surface_body(&parts.canonical()?.brep)?;
+ crate::surfaces::all_new(body, &[])
}
-/// The edges of one side from `a` to `b`, split at the points of `corners` that lie on it
-/// (within [`CROSS_TOLERANCE`]) strictly between its ends.
-fn side_edges(mut curve: mt::BSplineCurve, a: &mt::Vertex, b: &mt::Vertex, corners: &[Vec3]) -> Vec {
- let (t0, t1) = curve.range_tuple();
+/// The points of `corners` on a side's curve (within [`CROSS_TOLERANCE`]) strictly between its
+/// ends, with their parameters, in order: each found from its nearest of 256 samples by
+/// golden-section search.
+fn cuts_on(c: &CurveEval, [t0, t1]: [f64; 2], corners: &[Vec3]) -> Vec<(f64, Vec3)> {
+ const SAMPLES: usize = 256;
let margin = (t1 - t0) * 1e-6;
- let mut cuts: Vec = corners
+ let mut cuts: Vec<(f64, Vec3)> = corners
.iter()
- .filter_map(|c| {
- let t = curve.search_nearest_parameter(p3(*c), None, 100)?;
- (t > t0 + margin && t < t1 - margin && from_p3(curve.subs(t)).dist(*c) <= CROSS_TOLERANCE).then_some(t)
+ .filter_map(|p| {
+ let d = |t: f64| c.point(t).map_or(f64::INFINITY, |q| q.dist(*p));
+ let at = |i: usize| t0 + (t1 - t0) * i as f64 / SAMPLES as f64;
+ let i = (0..=SAMPLES).min_by(|a, b| d(at(*a)).total_cmp(&d(at(*b))))?;
+ let (mut lo, mut hi) = (at(i.saturating_sub(1)), at((i + 1).min(SAMPLES)));
+ let g = 0.5 * (5f64.sqrt() - 1.0);
+ for _ in 0..80 {
+ let (x, y) = (hi - g * (hi - lo), lo + g * (hi - lo));
+ if d(x) < d(y) {
+ hi = y;
+ } else {
+ lo = x;
+ }
+ }
+ let t = 0.5 * (lo + hi);
+ (t > t0 + margin && t < t1 - margin && d(t) <= CROSS_TOLERANCE).then(|| (t, c.point(t).unwrap_or(*p)))
})
.collect();
- cuts.sort_by(f64::total_cmp);
- cuts.dedup_by(|x, y| (*x - *y).abs() <= margin);
- let mut edges = Vec::with_capacity(cuts.len() + 1);
- let mut from = a.clone();
- // Cut from the far end back, so the earlier parameters stay on the part kept.
- let mut tails = Vec::with_capacity(cuts.len());
- for &t in cuts.iter().rev() {
- tails.push(curve.cut(t));
- }
- let mut pieces = vec![curve];
- pieces.extend(tails.into_iter().rev());
- let count = pieces.len();
- for (k, piece) in pieces.into_iter().enumerate() {
- let to = if k + 1 == count { b.clone() } else { mt::Vertex::new(piece.subs(piece.range_tuple().1)) };
- edges.push(mt::Edge::new(&from, &to, mt::Curve::BSplineCurve(piece)));
- from = to;
- }
- edges
+ cuts.sort_by(|a, b| a.0.total_cmp(&b.0));
+ cuts.dedup_by(|x, y| (x.0 - y.0).abs() <= margin);
+ cuts
+}
+
+fn index(i: usize) -> Result {
+ u32::try_from(i).map_err(|_| KernelError::TooLarge("boundary surface: too many edges".into()))
}
#[cfg(test)]
mod tests {
use super::*;
use crate::patch_region;
- use mt::ParametricSurface3D;
use solidcraft_geom::{Loop2, Region2, Vec2};
fn sketch(label: &str, plane: Plane, segs: Vec) -> BoundaryCurve<'static> {
@@ -482,8 +517,8 @@ mod tests {
BoundaryCurve { label: label.into(), source: CurveSource::Points(vec![a, b]), continuity: Continuity::G0 }
}
- fn face_surface(b: &Body) -> mt::Surface {
- b.solid.face_iter().next().unwrap().surface()
+ fn face_surface(b: &Body) -> SurfaceEval {
+ SurfaceEval::new(&b.record().faces[0].surface).unwrap()
}
/// The flat sheet y ∈ [−10, 0], x ∈ [0, 10] in z = 0, its edge along y = 0 open.
@@ -506,7 +541,7 @@ mod tests {
let s = face_surface(&body);
for i in 0..=10 {
for j in 0..=10 {
- let q = from_p3(s.subs(i as f64 / 10.0, j as f64 / 10.0));
+ let q = s.point([i as f64 / 10.0, j as f64 / 10.0]).unwrap();
assert!((q.z - q.x * q.y / 10.0).abs() < 1e-9, "{q:?}");
}
}
@@ -530,7 +565,7 @@ mod tests {
let s = face_surface(&body);
for i in 0..=8 {
for j in 0..=8 {
- assert!((s.subs(i as f64 / 8.0, j as f64 / 8.0).z - 3.0).abs() < 1e-9);
+ assert!((s.point([i as f64 / 8.0, j as f64 / 8.0]).unwrap().z - 3.0).abs() < 1e-9);
}
}
}
@@ -580,8 +615,7 @@ mod tests {
let apex = BoundaryCurve { label: "centre".into(), source: CurveSource::Point(Vec3::ZERO), continuity: Continuity::G0 };
let body = boundary_surface(&[sketch("arc", pl, vec![arc]), apex], &[sketch("x", pl, vec![x]), sketch("y", pl, vec![y])]).unwrap();
assert!(body.is_surface() && body.face_count() == 1);
- let edges: std::collections::HashSet<_> = body.solid.edge_iter().map(|e| e.id()).collect();
- assert_eq!(edges.len(), 3, "the collapsed side is no edge");
+ assert_eq!(body.edge_count(), 3, "the collapsed side is no edge");
let want = PI * r * r / 4.0;
let near = |a: f64| (a - want).abs() < 0.2;
let faces = body.faces(0.01).unwrap();
@@ -600,11 +634,11 @@ mod tests {
}
/// The angle between the two faces' normals across the edge at `p`.
- fn normal_angle(a: &mt::Surface, b: &mt::Surface, p: Vec3) -> f64 {
- let n = |s: &mt::Surface| {
- let (u, v) = s.search_nearest_parameter(p3(p), None, 100).unwrap();
- let n = s.normal(u, v);
- Vec3::new(n.x, n.y, n.z)
+ fn normal_angle(a: &SurfaceEval, b: &SurfaceEval, p: Vec3) -> f64 {
+ let n = |s: &SurfaceEval| {
+ let [u, v] = s.project(p, None, f64::INFINITY).unwrap();
+ let (_, su, sv) = s.derivs(u, v).unwrap();
+ su.cross(sv).normalized().unwrap()
};
n(a).dot(n(b)).abs().clamp(0.0, 1.0).acos().to_degrees()
}
@@ -650,11 +684,10 @@ mod tests {
/// Normal curvature of `s` at the point nearest `p` in the direction `w` (projected into the
/// tangent plane), signed against the unit normal `n`.
- fn normal_curvature(s: &mt::Surface, p: Vec3, w: Vec3, n: Vec3) -> f64 {
- let (u, v) = s.search_nearest_parameter(p3(p), None, 100).unwrap();
- let v3 = |x: mt::Vector3| Vec3::new(x.x, x.y, x.z);
- let (su, sv) = (v3(s.uder(u, v)), v3(s.vder(u, v)));
- let (suu, suv, svv) = (v3(s.uuder(u, v)), v3(s.uvder(u, v)), v3(s.vvder(u, v)));
+ fn normal_curvature(s: &SurfaceEval, p: Vec3, w: Vec3, n: Vec3) -> f64 {
+ let [u, v] = s.project(p, None, f64::INFINITY).unwrap();
+ let (_, su, sv) = s.derivs(u, v).unwrap();
+ let (suu, suv, svv) = s.second(u, v).unwrap();
let (e, f, g) = (su.dot(su), su.dot(sv), sv.dot(sv));
let (l, m, nn) = (suu.dot(n), suv.dot(n), svv.dot(n));
let (p1, q1) = (w.dot(su), w.dot(sv));