pali112
/
build123d_orange
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Teraz będę robił z zatrzaskami

This commit is contained in:
Rafał Paluch 2025-11-23 00:01:52 +01:00
parent db725417ac
commit b8ba9e6e64
3 changed files with 216 additions and 108 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
__pycache__/orange.cpython-312.pyc
View File

Binary file not shown.

184
orange.py
View File

@ -5,132 +5,100 @@ from ocp_vscode import *
orange = import_step("./OrangePi-Box.step")
orange = orange.rotate(Axis.X, -90).move(Location((0, 0, 37)))
# (Twoje parametry pozostają bez zmian)
dlugosc = 112.80
szerokosc = 87.80
wysokosc = 54
scianka = 3
# --- Parametry otworów (skrócone dla czytelności kodu, wartości te same) ---
dl1o, sz1o, offset_x1, offset_y1 = 17.84, 11.68, 8.931, 18.295
dl2o, sz2o, offset_x2, offset_y2 = 24.103, 22.007, 27.894, 19.047
dl3o, sz3o, offset_x3, offset_y3 = 6.20, 8.40, 55.740, 14.770
dl4o, sz4o, offset_x4, offset_y4 = 26.577, 19.737, 70.481, 23.208
dl5o, sz5o, offset_x5, offset_y5 = 15.400, 20.400, 8.910, 16.720
dl6o, sz6o, offset_x6, offset_y6 = 10.200, 19.600, 27.160, 15.620
dl7o, sz7o, offset_x7, offset_y7 = 43.200, 20.200, 63.660, 17.820
# 1 otworek
dl1o = 17.84
sz1o = 11.68
offset_x1 = 8.931
offset_y1 = 18.295
# 2 otworek
dl2o = 24.103
sz2o = 22.007
offset_x2 = 27.894
offset_y2 = 19.047
# 3 otworek
dl3o = 6.20
sz3o = 8.40
offset_x3 = 55.740
offset_y3 = 14.770
# 4 otworek
dl4o = 26.577
sz4o = 19.737
offset_x4 = 70.481
offset_y4 = 23.208
# 5 otworek
dl5o = 15.400
sz5o = 20.400
offset_x5 = 8.910
offset_y5 = 16.720
# otworek 6
dl6o = 10.200
sz6o = 19.600
offset_x6 = 27.160
offset_y6 = 15.620
# otworek 7
dl7o = 43.200
sz7o = 20.200
offset_x7 = 63.660
offset_y7 = 17.820
# mini_uchwytik
mini_udl = 10
mini_usz = 8.500
mini_ugr = 4
# wyciecie_mini
wyc_dl = 3
wyc_sz = 3
wyc_gr = 4.50
# podstawa_uchwyciku
pods_dl = 12.820
pods_sz = 13.400
pods_gr = 1.7
offset_podstawy = 1.410
przesuniecie_uchwyciku = 17.607
# Parametry uchwytu
mini_udl, mini_usz, mini_ugr = 10, 8.500, 4
wyc_dl, wyc_sz, wyc_gr = 3, 3, 4.50
pods_dl, pods_sz, pods_gr = 12.820, 13.400, 1.7
offset_podstawy, przesuniecie_uchwyciku = 1.410, 17.080
with BuildPart() as box:
# --- Główna puszka ---
with BuildSketch() as s1:
Rectangle(dlugosc, szerokosc)
extrude(amount=wysokosc)
offset(amount=-scianka, openings=box.faces().sort_by(Axis.Z)[-1])
# --- Wycinanie otworów (Twoja logika, zgrupowana dla wydajności) ---
front = box.faces().sort_by(Axis.Y)[0]
front_left_edge_vertex = box.faces().sort_by(Axis.Y)[0].edges().filter_by(Axis.Z).sort_by(Axis.X)[0].vertices()[0]
with BuildSketch(front) as s2:
with Locations((front_left_edge_vertex.X + offset_x1, -offset_y1)):
Rectangle(dl1o, sz1o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(front) as s3:
with Locations((front_left_edge_vertex.X + offset_x2, -offset_y2)):
Rectangle(dl2o, sz2o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(front) as s4:
with Locations((front_left_edge_vertex.X + offset_x3, -offset_y3)):
Rectangle(dl3o, sz3o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(front) as s5:
with Locations((front_left_edge_vertex.X + offset_x4, -offset_y4)):
Rectangle(dl4o, sz4o, align=(Align.MIN, Align.MIN, Align.CENTER))
# Punkt odniesienia frontu
v_front = front.edges().filter_by(Axis.Z).sort_by(Axis.X)[0].vertices()[0]
with BuildSketch(front):
with Locations((v_front.X + offset_x1, -offset_y1)): Rectangle(dl1o, sz1o, align=(Align.MIN, Align.MIN, Align.CENTER))
with Locations((v_front.X + offset_x2, -offset_y2)): Rectangle(dl2o, sz2o, align=(Align.MIN, Align.MIN, Align.CENTER))
with Locations((v_front.X + offset_x3, -offset_y3)): Rectangle(dl3o, sz3o, align=(Align.MIN, Align.MIN, Align.CENTER))
with Locations((v_front.X + offset_x4, -offset_y4)): Rectangle(dl4o, sz4o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
back = box.faces().sort_by(Axis.Y)[-1]
back_left_edge_vertex = box.faces().sort_by(Axis.Y)[-1].edges().filter_by(Axis.Z).sort_by(Axis.X)[-1].vertices()[0]
with BuildSketch(back) as s6:
with Locations((back_left_edge_vertex.X - offset_x5, + offset_y5)):
Rectangle(dl5o, sz5o, align=(Align.MAX, Align.MAX))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(back) as s7:
with Locations((back_left_edge_vertex.X - offset_x6 - 12.450, + offset_y6)):
with GridLocations(12.450, 0, 3, 1):
Rectangle(dl6o, sz6o, align=(Align.MAX, Align.MAX))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(back) as s8:
with Locations((back_left_edge_vertex.X - offset_x7, + offset_y7)):
Rectangle(dl7o, sz7o, align=(Align.MAX, Align.MAX))
# Punkt odniesienia tyłu
v_back = back.edges().filter_by(Axis.Z).sort_by(Axis.X)[-1].vertices()[0]
with BuildSketch(back):
with Locations((v_back.X - offset_x5, + offset_y5)): Rectangle(dl5o, sz5o, align=(Align.MAX, Align.MAX))
with Locations((v_back.X - offset_x6 - 12.450, + offset_y6)):
with GridLocations(12.450, 0, 3, 1): Rectangle(dl6o, sz6o, align=(Align.MAX, Align.MAX))
with Locations((v_back.X - offset_x7, + offset_y7)): Rectangle(dl7o, sz7o, align=(Align.MAX, Align.MAX))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
# --- ZAGNIEŻDŻONY BUILD PART NA UCHWYTY ---
# Pobieramy ścianę boczną głównego pudełka jako referencję
bok = box.faces().sort_by(Axis.X)[-1]
with BuildSketch(bok) as uchwycik:
Rectangle(mini_udl, mini_usz)
u1 = extrude(amount=mini_ugr)
u1_face = u1.faces().sort_by(Axis.Y)[0]
u2_face = u1.faces().sort_by(Axis.X)[-1]
with BuildSketch(u1_face) as wyc1:
with Locations((-2.750, -0.5)):
Rectangle(wyc_dl, wyc_sz)
# Tworzymy osobną, "wewnętrzną" przestrzeń tylko dla uchwytów
with BuildPart() as uchwyty_komplet:
# 1. Budujemy prawy uchwyt (tak jak w Twoim kodzie)
with BuildSketch(bok) as szkic_uchwytu:
with Locations((-przesuniecie_uchwyciku, 0)):
Rectangle(mini_udl, mini_usz)
# Zmienilem nazwe zmiennej z 'u1' na 'baza', żeby nie psuć kontekstu
baza = extrude(amount=mini_ugr)
# Operacje na uchwycie
u1_face = baza.faces().sort_by(Axis.Y)[0]
u2_face = baza.faces().sort_by(Axis.X)[-1]
with BuildSketch(u1_face):
with Locations((-2.750, -0.5)):
Rectangle(wyc_dl, wyc_sz)
mirror(about=Plane.YZ) # Lustro szkicu wycięcia
extrude(amount=-wyc_gr, mode=Mode.SUBTRACT)
with BuildSketch(u2_face):
with Locations((-offset_podstawy, 0)):
Rectangle(pods_dl, pods_sz)
extrude(amount=pods_gr)
# 2. KLUCZOWY MOMENT: Mirror całego uchwytu wewnątrz tej pod-przestrzeni
# Ponieważ jesteśmy w 'uchwyty_komplet', to polecenie skopiuje wszystko co tu stworzyliśmy
mirror(about=Plane.YZ)
extrude(amount=-wyc_gr, mode=Mode.SUBTRACT)
with BuildSketch(u2_face) as uchwycik_podstawa:
with Locations((-offset_podstawy, 0)):
Rectangle(pods_dl, pods_sz)
extrude(amount=pods_gr)
# 3. Dodajemy gotowy zestaw uchwytów (prawy + lewy) do głównego pudełka
# add(uchwyty_komplet.part)
# with BuildPart() as zatrzask:
# z = box.faces().filter_by(Axis.Y).sort_by(Axis.Y)[-2]
# with BuildSketch(z):
# Rectangle(20, 20)
# extrude(amount=50)
# # Wizualizacja
# show_all()
show(box, orange, uchwycik_podstawa)
show(box, orange)

140
orange_copy.py Normal file
View File

@ -0,0 +1,140 @@
from build123d import *
from ocp_vscode import *
orange = import_step("./OrangePi-Box.step")
orange = orange.rotate(Axis.X, -90).move(Location((0, 0, 37)))
dlugosc = 112.80
szerokosc = 87.80
wysokosc = 54
scianka = 3
# 1 otworek
dl1o = 17.84
sz1o = 11.68
offset_x1 = 8.931
offset_y1 = 18.295
# 2 otworek
dl2o = 24.103
sz2o = 22.007
offset_x2 = 27.894
offset_y2 = 19.047
# 3 otworek
dl3o = 6.20
sz3o = 8.40
offset_x3 = 55.740
offset_y3 = 14.770
# 4 otworek
dl4o = 26.577
sz4o = 19.737
offset_x4 = 70.481
offset_y4 = 23.208
# 5 otworek
dl5o = 15.400
sz5o = 20.400
offset_x5 = 8.910
offset_y5 = 16.720
# otworek 6
dl6o = 10.200
sz6o = 19.600
offset_x6 = 27.160
offset_y6 = 15.620
# otworek 7
dl7o = 43.200
sz7o = 20.200
offset_x7 = 63.660
offset_y7 = 17.820
# mini_uchwytik
mini_udl = 10
mini_usz = 8.500
mini_ugr = 4
# wyciecie_mini
wyc_dl = 3
wyc_sz = 3
wyc_gr = 4.50
# podstawa_uchwyciku
pods_dl = 12.820
pods_sz = 13.400
pods_gr = 1.7
offset_podstawy = 1.410
przesuniecie_uchwyciku = 17.080
with BuildPart() as box:
with BuildSketch() as s1:
Rectangle(dlugosc, szerokosc)
extrude(amount=wysokosc)
offset(amount=-scianka, openings=box.faces().sort_by(Axis.Z)[-1])
front = box.faces().sort_by(Axis.Y)[0]
front_left_edge_vertex = box.faces().sort_by(Axis.Y)[0].edges().filter_by(Axis.Z).sort_by(Axis.X)[0].vertices()[0]
with BuildSketch(front) as s2:
with Locations((front_left_edge_vertex.X + offset_x1, -offset_y1)):
Rectangle(dl1o, sz1o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(front) as s3:
with Locations((front_left_edge_vertex.X + offset_x2, -offset_y2)):
Rectangle(dl2o, sz2o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(front) as s4:
with Locations((front_left_edge_vertex.X + offset_x3, -offset_y3)):
Rectangle(dl3o, sz3o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(front) as s5:
with Locations((front_left_edge_vertex.X + offset_x4, -offset_y4)):
Rectangle(dl4o, sz4o, align=(Align.MIN, Align.MIN, Align.CENTER))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
back = box.faces().sort_by(Axis.Y)[-1]
back_left_edge_vertex = box.faces().sort_by(Axis.Y)[-1].edges().filter_by(Axis.Z).sort_by(Axis.X)[-1].vertices()[0]
with BuildSketch(back) as s6:
with Locations((back_left_edge_vertex.X - offset_x5, + offset_y5)):
Rectangle(dl5o, sz5o, align=(Align.MAX, Align.MAX))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(back) as s7:
with Locations((back_left_edge_vertex.X - offset_x6 - 12.450, + offset_y6)):
with GridLocations(12.450, 0, 3, 1):
Rectangle(dl6o, sz6o, align=(Align.MAX, Align.MAX))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
with BuildSketch(back) as s8:
with Locations((back_left_edge_vertex.X - offset_x7, + offset_y7)):
Rectangle(dl7o, sz7o, align=(Align.MAX, Align.MAX))
extrude(amount=-scianka, mode=Mode.SUBTRACT)
bok = box.faces().sort_by(Axis.X)[-1]
with BuildPart() as u1:
with BuildSketch(bok) as uchwycik:
with Locations((-przesuniecie_uchwyciku, 0)):
Rectangle(mini_udl, mini_usz)
u1 = extrude(amount=mini_ugr)
u1_face = u1.faces().sort_by(Axis.Y)[0]
u2_face = u1.faces().sort_by(Axis.X)[-1]
with BuildSketch(u1_face) as wyc1:
with Locations((-2.750, -0.5)):
Rectangle(wyc_dl, wyc_sz)
mirror(about=Plane.YZ)
extrude(amount=-wyc_gr, mode=Mode.SUBTRACT)
with BuildSketch(u2_face) as uchwycik_podstawa:
with Locations((-offset_podstawy, 0)):
Rectangle(pods_dl, pods_sz)
extrude(amount=pods_gr)
mirror(about=Plane.YZ)
# show_all()
show(box)